I'm working on a project that spans three sheets. A2:A151 of Sheet 1 and 2 is a list of names. The names may repeat and they probably won't fill all 150 rows. What I'd like to do with formulas is combine Sheet 1 and 2 into a single list in Column A of Sheet 3 without repeating names or showing blanks. I'm fine with multiple formulas and hiding columns, whatever needs to be done to make it work. Is this possible?
View 2 Replieshow to combine these two codes into one?
Code:
Sub DelTemp()
Dim LR As Long, i As Long
Dim pt As PivotTable
[Code].....
I have the following formula... in Cell T4 =IF($Q4="",(M4&(IF(L4="","",(" ("&L4&")")))),(IF( ISNA(VLOOKUP($Q4, Lookup!$A$1:$B$5,2,FALSE)),Q4,VLOOKUP($Q4,Lookup!$A$1:$B$5,2,FALSE)))) But I also want to replace the 'R(space)' in the cell at the same time. I currently do that in a separate cell using: =SUBSTITUTE(T4,"R ",""). How do I combine the two..so that it is done in one action ??
View 2 Replies View RelatedIs it possible to combine the following three formulas into one formula?
=IF(AND(H5>59,(I5<5),(J5<15)),("Close Out"),(""))
=IF(AND(H5>59,(I5<15),(J5<5)),("Close Out"),(""))
=IF(AND(H5>55,(I5<10),(J5<3)),("Close Out"),(""))
I am looking at combining 2 formulas and have them in a single cell. Currently I am using this one =IFERROR(IF(S3-V3=0,"Completed within agreed time!",S3-V3),"") if the value =0 but need another one if there's no value in V3 it would say "Outstanding" I have tried to add IFBLANK to the existing formula but I must be doing something wrong as it doesn't work.
View 1 Replies View RelatedHow to combine these two formulas into one big If formula..
=IF(F2=G2,2)
=--(SUM(F2:G2)0)
F2....G2....H2
10....10.....2
5......5......2
[Code] .......
H2 is the resulting cell.
i was wondering if there was a way i can combine these two formulas into one large one
=IF(AF8="","",INDEX($A$3:$A$102,AGGREGATE(15,6,(ROW($L$3:$L$103)-ROW($L$3)+1)/($L$3:$L$103=AF8),COUNTIF($AF$8:AF8,AF8))))
=IF(AG8="","",INDEX($A$3:$A$102,AGGREGATE(15,6,(ROW($M$3:$M$103)-ROW($M$3)+1)/($M$3:$M$103=AG8),COUNTIF($AG$8:AG8,AG8))))
Here's my formula that gives me an answer of zero.
=IF(IF(L14="L",(LOOKUP(B14,data!Y1:Y14831,data!AO1:AO14831)),0),IF(L14="L+R",(LOOKUP(B14,data!Y1:Y14 831,data!AQ1:AQ14831)),0),0)
L14 is a dropdown box, selection is L or L+R
The L true result is 30 and L+R result is 60
It should be possible to combine these should it not?
I would do a screen shot but it's quite huge.
I am trying to combine this formula with another formula but I cant get it right.
I have multiple worksheets that feed into 1 so I am using this formula to pull in the info.
=II.MissionCritical!C20. This info is a title like "Writing".
=II.MissionCritical!C23. This info is a yes or no.
So I need the =II.MissionCritical!C20 formula to also say if c23 is no add an *** to the front of the title. so the title would look like "***Writing". and if C23 is yes leave the title as is.
On Sheet 2 I am looking for a formula to find Dog1 in a cell on a different sheet and then to equal a cell 2 columns to the right of where ever it found Dog1. I cannot make it so that it simply equals a certain cell all of the time. It has to be able to move in sheet 1. For example sometimes Dog1 will be on row 5 and sometimes it will be on row 7. So the equation I am looking for needs to be able to work no matter what row it is on. I have tried a couple VLOOKUP equations but they are not working because like I said, Dog1 is not the only text in that cell.
View 3 Replies View RelatedTrying to combine Column A (First Name) with Column B (Last Name) Probably very simple.!
View 2 Replies View RelatedI have monthly reports that come to us from a Data Warehouse. They vary in size(row length). The problem is that the information in one column actually belongs in the next column (i.e. C to D). As this information in Column C is just an "offset" from Column D there is no issue with overwriting any data in column D. Manually, I could copy the columm and Paste Special, Skip Blanks, to column D.
I've been trying to do this in code as some reports can be fairly lengthy: As there are some blank rows, I've inserted this FinalRow procedure, to provide the size of each report:
FinalRow = ActiveSheet.UsedRange.Rows.Count + _
ActiveSheet.UsedRange.Rows(1).Row - 1
However, in trying to use the FinalRow value in a "Copy the contents from Column C....Cells(20,3 to FinalRow, 3) and then PasteSpecial to Column D (Operation:=xlNone, SkipBlanks:=True) has not been productive. It keeps producing a number of Errors, in every way that I have tried to make this work.
If I have two columns which are lists of names, how do I make a new column which merges the names from each column into one list, and will refresh when new data is added to the two originals.
View 14 Replies View Relatedive got columns of dates that i want to aggregate up into a single column of distinct dates. the dates columns are of varying length, some with gaps in the middle of the column, and some columns are blank. dates in teh columns may duplicate, but i only want distinct dates copied in the single column.
i cant do this by hand because there are dates in around 200 columns so i need a macro or way to do this quickly. ive attached a picture to explain the problem.
see the picture below to get an idea of what i want to do.
http://aycu15.webshots.com/image/362...0389296_rs.jpg
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI'm trying to write some code to Hide columns if the first 3 characters of cells in a range equal the contents of another (formula equivalent would be something like this =IF((LEFT(A2,3))=A1,"HIDE COLUMN", "SHOW COLUMN"). I have gotten this far but cant get it to work;-
Private Sub Worksheet_Change(ByVal Target As Range)
Dim r As Range, cell As Range
On Error GoTo ErrHandler
Set r = Me.Range("B7:CG7")
Application.ScreenUpdating = False
Application.EnableEvents = False
Row = 1
col = 1
For Each cell In r
If cell.Value = "" And Left(cell.Value, 3) = cell(Row, col).Value Then
cell.EntireColumn.Hidden = True
Else
cell.EntireColumn.Hidden = False
End If
Next
ErrHandler:
Application.ScreenUpdating = True
Application.EnableEvents = True
End Sub
RCA Page for forum.xlsx
I'm trying to get entries from one table to appear in another. The first table is like this:
DateDate
Customer Column1
Description Column1
Customer Column2
Customer Description2
Created By
The table I want to put the data into looks like this:
Date
Customer
Description
Created By
Date formatting. I have two columns first column is for the date (3/6/2013) and the second column is for the time (12:37:16 AM). I would like to combine the content of both columns to be like (2/11/2013 12:35:00 AM) .
I am using concatenate but I don't have any luck. How to combine the content of my two columns.
[URL]...I was trying to use this thread's solution macro on my sheet that is only consolidating columns A, B, and C with a couple thousand lines and I've had it running for over an hour now. There hasn't been any errors but is there any particular reason that might be causing it to take longer than it should aside from having to go through a few thousand rows?
Basically, I only want 1 Version of data in Column B and any other rows that has a match in column B, i want to consolidate unique data from Columns A and C.
A B C
AB 123 AAC
BA 131 AAC
AB 222 CAA
Res:
A B C
AB 123, 222 AAC, CAA
BA 131 AAC
I have a spreadsheet in Excel 7 for a lifelong cashflow model. The main worksheet is called 'Projection' with ages in rows & income (from a variety of sources) and expenditure (of various kinds) in columns fed with data from the Input sheet.
On the 'Input' sheet I have a button called Format Graphs which controls the following macro:
This isn't absolutely necessary, but being able to do this easily would cut down on a lot of tedious jobs for me. Let's say I have a set of data like this (I tried to space it out as best I could to give the idea):
View 3 Replies View RelatedI am waaaaay in over my head here. I've not done any scripting/macro/vb/whatnot work in Excel, but I'm staring down a potential all-night project manually merging data.
Here's what I have:
Is there a function in Excel that allows you to combine non-numeric columns as a list?
For example, 91401 is a zip shared by three cities: Van Nuys, Sherman Oaks and Valley Glen.
The data is in a workbook as three rows (each with 91401 as the first column, and cities listed individually:
91401 Van Nuys
91401 Sherman Oaks
91401 Valley Glen
I am eventually wanting to do a v-lookup with the zip, but the duplication is causing problems. I want the associated cities listed, but only want one row. The cities could be listed, separated by commas (preferably), like below:
91401 Van Nuys, Sherman Oaks, Valley Glen
The list of zips I have is several thousand long, so it's not practical for me to do it manually. Is there a "pivot table" of text that I could use?
I have data in excel that has some information the same with a unique field. See below:
Last Name
First Name
ID
Date
Address
Apt #
Acct #
Code 1
[code]...
I want it to consolidate all of the like information but add on the codes in separate columns like this:
Last Name
First Name
ID
Date
Address
Apt #
Acct #
Code 1
Code 2
Code 3
Code 4
[code]...
Also, sometimes the same code is used multiple times but i want any duplicate codes to show as separate codes.
Is it possible to apply a formula with a relative reference to an entire column? I have a very long, constantly updated datasheet for pivot tables and this would be a most helpful thing to know.
I have data from F1 to AG1...I am unable to create a formulae & drag in excel in a column like
=F1
=G1
=H1.....If i drag after H1...it is reflecting as
=F4
=G4
=H4.
I would now like to as remove the first column and add another column a and b. A would say "Service From Date" and column B would say "Service To Date" In addition I would like to add a column between "5202 Meals Provided" and "5221 S.A. Facility Lodging" a column that reads "7025 Number of Days Care" and that tallies like the rest of them.
View 14 Replies View RelatedI need to editing a VBA script and can't assist right now. Here is the VBA script as it exists today:
View 3 Replies View RelatedI have column AD where there are something like 2,500+ formulas. I would like to change the columns used in the formulas around. By that I mean the first formula is...
Code:
=SUM(AA6-X6)
...and I would like it to be...
Code:
=SUM(X6-AA6)
Now the thing is, the formulas are not continuous, there are breaks where there is a formula to sum say the previous dozen or so for example, then it skips a couple of rows and I have more formulas and then the sum say for the previous dozen for example and so on.
I just want those cells changed with the particular formulas as above.