Combining Formulas In A Cell And Concatenate
Feb 18, 2010
I am trying to combine this formula with another formula but I cant get it right.
I have multiple worksheets that feed into 1 so I am using this formula to pull in the info.
=II.MissionCritical!C20. This info is a title like "Writing".
=II.MissionCritical!C23. This info is a yes or no.
So I need the =II.MissionCritical!C20 formula to also say if c23 is no add an *** to the front of the title. so the title would look like "***Writing". and if C23 is yes leave the title as is.
View 2 Replies
ADVERTISEMENT
Jan 13, 2014
I am looking at combining 2 formulas and have them in a single cell. Currently I am using this one =IFERROR(IF(S3-V3=0,"Completed within agreed time!",S3-V3),"") if the value =0 but need another one if there's no value in V3 it would say "Outstanding" I have tried to add IFBLANK to the existing formula but I must be doing something wrong as it doesn't work.
View 1 Replies
View Related
Dec 11, 2013
I'm trying to automate creating certain keyword combinations I need, based off of the values I input into reference cells in columns A - E; the goal is to compile a list of keywords which I will then use to track my rankings in search engines.
I'm looking to only output 500 keywords, so some of the cells in columns A, B, C & E will not contain data (column D will always have a primary Geo-target listed). This results in some of the concatenate formulas I've created outputting partial data (i.e. if there is no data in cell A10, and cell D2 contains the word "Knoxville", then cell I10 will output the data, "Knoxville "). How can I setup conditioning formatting or a formula so that these auto-generated cells appear blank if one of the reference cells has no data within it?The reason why I need the above to work is because I want to setup a formula that automatically counts the # of keyword combinations created by the data entered into any of the reference cells. With the partial combinations being listed, it skews my data. Which leads me to my next question: what is the best formula for counting the # of cells containing a full keyword combination from any of the cells listed in columns G - O (minus the data in the header cells; i.e. G1, H1, etc...)?Lastly, is there a formula I could use that would then aggregate all of the full keyword combinations within the "Complete Keyword List" column (column P)?
View 11 Replies
View Related
Mar 25, 2009
I got this last night, and decided to see if I can combine two equations if possible. Here is what I have:
View 3 Replies
View Related
Aug 2, 2014
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies
View Related
Jul 22, 2014
how to combine these two codes into one?
Code:
Sub DelTemp()
Dim LR As Long, i As Long
Dim pt As PivotTable
[Code].....
View 1 Replies
View Related
Feb 9, 2007
I have the following formula... in Cell T4 =IF($Q4="",(M4&(IF(L4="","",(" ("&L4&")")))),(IF( ISNA(VLOOKUP($Q4, Lookup!$A$1:$B$5,2,FALSE)),Q4,VLOOKUP($Q4,Lookup!$A$1:$B$5,2,FALSE)))) But I also want to replace the 'R(space)' in the cell at the same time. I currently do that in a separate cell using: =SUBSTITUTE(T4,"R ",""). How do I combine the two..so that it is done in one action ??
View 2 Replies
View Related
May 26, 2014
Is it possible to combine the following three formulas into one formula?
=IF(AND(H5>59,(I5<5),(J5<15)),("Close Out"),(""))
=IF(AND(H5>59,(I5<15),(J5<5)),("Close Out"),(""))
=IF(AND(H5>55,(I5<10),(J5<3)),("Close Out"),(""))
View 2 Replies
View Related
Apr 6, 2012
I'm working on a project that spans three sheets. A2:A151 of Sheet 1 and 2 is a list of names. The names may repeat and they probably won't fill all 150 rows. What I'd like to do with formulas is combine Sheet 1 and 2 into a single list in Column A of Sheet 3 without repeating names or showing blanks. I'm fine with multiple formulas and hiding columns, whatever needs to be done to make it work. Is this possible?
View 2 Replies
View Related
Apr 8, 2013
How to combine these two formulas into one big If formula..
=IF(F2=G2,2)
=--(SUM(F2:G2)0)
F2....G2....H2
10....10.....2
5......5......2
[Code] .......
H2 is the resulting cell.
View 3 Replies
View Related
Jun 6, 2013
i was wondering if there was a way i can combine these two formulas into one large one
=IF(AF8="","",INDEX($A$3:$A$102,AGGREGATE(15,6,(ROW($L$3:$L$103)-ROW($L$3)+1)/($L$3:$L$103=AF8),COUNTIF($AF$8:AF8,AF8))))
=IF(AG8="","",INDEX($A$3:$A$102,AGGREGATE(15,6,(ROW($M$3:$M$103)-ROW($M$3)+1)/($M$3:$M$103=AG8),COUNTIF($AG$8:AG8,AG8))))
View 2 Replies
View Related
Jan 12, 2009
Here's my formula that gives me an answer of zero.
=IF(IF(L14="L",(LOOKUP(B14,data!Y1:Y14831,data!AO1:AO14831)),0),IF(L14="L+R",(LOOKUP(B14,data!Y1:Y14 831,data!AQ1:AQ14831)),0),0)
L14 is a dropdown box, selection is L or L+R
The L true result is 30 and L+R result is 60
It should be possible to combine these should it not?
I would do a screen shot but it's quite huge.
View 7 Replies
View Related
May 13, 2013
On Sheet 2 I am looking for a formula to find Dog1 in a cell on a different sheet and then to equal a cell 2 columns to the right of where ever it found Dog1. I cannot make it so that it simply equals a certain cell all of the time. It has to be able to move in sheet 1. For example sometimes Dog1 will be on row 5 and sometimes it will be on row 7. So the equation I am looking for needs to be able to work no matter what row it is on. I have tried a couple VLOOKUP equations but they are not working because like I said, Dog1 is not the only text in that cell.
View 3 Replies
View Related
Jun 2, 2009
I am trying to concatenate the values of many cells, not the formulas in the cells, to avoid having to repetatively paste special, value. Perhaps something like this: =CONCATENATE(VALUE(AA2):VALUE(AQ2))
View 3 Replies
View Related
Dec 3, 2013
I am using a lot of linked reports that have to be rewritten each month. For example smaller formulas look like this:
=('S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$228*2)+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$262+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$292
What I want to do is extract the file path from the above formula and make it a composite of several cell references.
So what I need is to have a cell where they can change the month and another where we can change the year. So I set up several named cells that look like this:
_MONTH =11 November
_YEAR =2013
_JOBCARD ='S:PUBLICProductionJob CardsMOLDING
_PATH =_JOBCARD & _YEAR &"" &_MONTH
I tried several versions, I am hoping for something like this:
=('_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$228*2)+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$262+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$292
View 4 Replies
View Related
Oct 6, 2007
I have a list of P/N's that are used in more then one location. and it's sorted by P/N's.
ColA__ColB__ColC
______Loc___PN
______1_____A
______2_____A
______3_____B
______4_____C
______5_____C
I Want to be able to put in Col A the concatenate results of all equal P/N's from any given list. Or at least select the few cells that i know are duplicates and from that copy the Location to a single Column.
ColA ColB__ColC
______Loc__PN
1,2____1___A
_______2___A
_______3___B
4,5____4___C
_______5___C
View 5 Replies
View Related
Aug 11, 2013
Sampling table :
one
two
three
four
one
two
three
one
two
one
Desired results obtained via IF =IF(B2>0,A2&" , ",A2)&IF(C2>0,B2&" , ",B2)&IF(D2>0,C2&" , ",C2)&IF(D2>0,D2,"")
one , two , three , four
one , two , three
one , two
one
Is there any smarter, shorter formula via Concatenate and Substitute or other formulas ?
My closest match, but not good enaugh is =SUBSTITUTE(CONCATENATE(A2&", "&B2&", "&C2&", "&D2), ", , ", " ")
[ returna 2 commad ]
one, two, three, four
one, two, three,
one, two
one ,
View 9 Replies
View Related
Jul 23, 2014
I am trying to combine the following two function into one cell. The second column contains a "space" before the number. The third column is the result. =CONCATENATE(Q2,",",+R2) and =SUBSTITUTE(K2," ","")
Here is a sample table with showing the data and result
4
5L
4,5L
5
6R
5,6R
5
7L
5,7L
6
10R
6,10R
6
3L
6,3L
View 1 Replies
View Related
Nov 26, 2008
I'm having trouble combining some values in cells. For example in cell A1 i have the value 372-25. In cell B1 i want to make A1 part of another value (it is an APN if you must know). So that cell would be 011-372-25-11. I would be adding 011 as a prefix to each cell and 11 as an ending. I'm sure there must be an easy way of doing this.
I have tried
=011-A1-11
="011-"A1"-11"
="011-A1-11"
View 4 Replies
View Related
Feb 22, 2010
I am trying to create one formula (in one cell) so that it performs the following three things:
1) Rounds any number to the nearest dollar
2) Makes the minimum dollar value $2.00
3) If another cell (G2) reaches $100.00 or more, I want it to revert to another cell's (B2) value.
So, in essence, I want to combine the following two things:
=MAX(2,ROUNDUP(F2,0))
AND
=IF(G2>="100",B2)
I do not know how to correctly order these so that it performs all three things I'm looking for it to do. I've posted this before, but was given an answer that created a circular reference and did not make the minimum value $2.00.
View 7 Replies
View Related
Sep 17, 2009
I am trying to combine multiple cells into 1 cell per row.
I would have "A" column empty, then combine "B", "C", and on into the "A" column.
Each cell value will be separated by a space or any special character I designate in the macro
I have attached an example which the output is separated by a space. Sheet1 has the original file and Sheet2 has the desired output.
View 9 Replies
View Related
Feb 8, 2012
I have the follwoing example. Basically, there is an "X" for each posession of Andrew (cells: B1, C2, D3, E4). What I'm trying to do, in another sheet, is centralize the below information in only one row for "Andrew", with an "X" under each of his posessions (all the 4 "X"-es are now in cells B1, C1, D1, E1).
CarPhoneHouseBoatAndrewXAndrewXAndrewXAndrewX
View 2 Replies
View Related
Jun 20, 2008
how can I combine the Formula =(SUM(A2:A100))/(SUM(B2:B100)) with setting a value of the cell D2?
What I want would look like this (in column C):
=(SUM(A2:A100))/(SUM(B2:B100)) with the condition that D2=0
=(SUM(A2:A100))/(SUM(B2:B100)) with the condition that D2=100
=(SUM(A2:A100))/(SUM(B2:B100)) with the condition that D2=200
=(SUM(A2:A100))/(SUM(B2:B100)) with the condition that D2=300
and so on.
The point is that the values A2 to A100 are dependent on the input value in D2.
View 9 Replies
View Related
Dec 27, 2009
I am using excel 2007 and have the following information:
Cell A1: L6212- (formatted as text)
Cell B1: 05.50 (formatted as custom number 00,00)
When I merge the 2 cells using the concatenate formula I end up with
Cell C1: L6212-5.5
What I want is L6212-05.50
View 10 Replies
View Related
Jan 14, 2014
Say I have a column of numbers. I'd like to be able to string them together in the following format: number1|number2|number3....
connect.xlsx
View 3 Replies
View Related
Feb 27, 2013
combining 2 rows that share 1 cell so that it is easier to format cells. For example: A4 and A5 have been combined with B4 and B5 to form 1 cell that has content. How can I convert this to a cell that only occupies A4?
View 1 Replies
View Related
Nov 19, 2013
I am trying to create one formula that can be copied to other cells to get varied results.
Here are the formulas
1. =IF('Calculated Rental Fees'!H4='Daily Rentals & Charges'!$B$28,'Daily Rentals & Charges'!$B$30,VLOOKUP('Daily Rentals & Charges'!$A$20,LATECHRGETBLE,2,FALSE)*C4
2. =IF(AND(I4>='Daily Rentals & Charges'!$A$36),I4='Daily Rentals & Charges'!$A$38),VLOOKUP('Daily Rentals & Charges'!$A$22,LATECHRGETBLE,2,FALSE)*C4)
Basically i am trying to calculate late fees for a rental company using the if and vlookup functions.
View 2 Replies
View Related
Jul 13, 2014
I am trying to use following string to find result into column F and unable to find reason for Error.
=INDEX($C$2:$C$5,MATCH(D2&E2,$A$2:$A$5&$B$2:$B$5,0))
A
B
C
D
E
F
1
part
code
price
find part
find code
Result
2
x
11
5
y
12
#VALUE!
[Code] ........
View 1 Replies
View Related
Aug 7, 2007
I have 5 columns AS-AW. Column AS contains a letter (either A, B, C, D, E, F, or G) which is generated by a VLookup formula. Columns AT-AW contain numbers (from 1 to 6) generated by a conditional formula. I need column AX to combine column AS with the smallest of columns AT-AW. Is this possible?
View 9 Replies
View Related
Oct 10, 2008
I'm trying to switch my vlookups to something more dynamic. I keep adding columns to the data sheet (sheet1 for these purposes) and so I have to go back and update all of the other sheets that use the vlookup. (I'll just give an example as sheet2 for these purposes)
So what I have currently:
=VLOOKUP(A5,Data_All,4,FALSE)
Basically the 'A' column in sheet2 has an integer value, and so the vlookup takes that integer and looks up on sheet1 which row corresponds to that integer and then returns that string value.
What I want:
='AO_Cat_' & 'A5'
Basically I have named every cell in sheet1 and the particular value that I want to pull is named "AO_Cat_%name" with the last part being the integer value. I don't know if that make sense or not. For example, on sheet2, A5 might be '16' and so the value that I want to pull is "AO_Cat_16"
If I were to do this from the VBA side of things, then it'd be a simple range("AO_Cat_" & id_number) where id_number was the lookup value. However, I'd prefer to have this directly as a worksheet formula for simplicity purposes.
View 9 Replies
View Related
