Combining Text And Cell Reference With Indirect
Oct 2, 2008
I'm trying to combine text and a cell reference using Indirect. Cell B1 contains the text "Region" (no quotation marks). In another cell I'm trying to create a reference to "Region total" (no quotation marks). By my limited understanding the below should work: =INDIRECT("b1"&" total")
But the cell returns #REF!. I've tried pretty much every combination of quotation marks around different elements of the formula I can think of. Cell B1 is a drop down list, don't imagine that's relevant, but it may be.
View 2 Replies
ADVERTISEMENT
Feb 13, 2014
Is there anyway to add text to an INDIRECT reference so that it will now reference a new range?
For instance, this is my formula...
=IF(INDEX(INDIRECT("A1+TM"),MATCH(B2,INDIRECT(A1),0),1)="","-",INDEX(INDIRECT("A1+TM"),MATCH(B2,INDIRECT(A1),0),1))
I am trying to say, if the cell 1 column to the left of the cell that matches the text in B2, in the cell range referenced in A1 (CWS) "added to the text "TM", is blank, then write "-", otherwise return the number in the cell 1 column to the left of the cell that matches the text in B2, in the cell range referenced in A1 (CWS)+"TM".
Cell A1 is a data validation list that refers to different ranges. The only difference between those named ranges and the named range I want to reference is the text "TM" comes at the end.
View 3 Replies
View Related
Jun 9, 2009
I have this formula in excel 2007:
=COUNTIFS(Blad1!W:W;"1";Blad1!X:X;"H")+COUNTIFS(Blad1!W:W;"6";Blad1!X:X;"H").
Blad is Dutch for sheet, by the way.
In this formula, I want to let the ranges in Sheet1 be dependent of values in Sheet2. The formula itself is in Sheet2.
W must be replaced by the value of Sheet2!B12 and X to be replaced by the value of Sheet2!B9.
I tried this by using the INDIRECT formula, but the quotation marks of the search values are giving errors.
View 6 Replies
View Related
Oct 11, 2011
I need making a dynamic cell reference in an indirect formula, which looks at a different workbook.
The other workbook is called: ESF.xlsx
The sheet name in the other workbook is defined in Cell B2
The first cell i need to pull across is B115.
In cell B8, This is what i have so far:
=INDIRECT("[ESF.xlsx]"&B2&"!"&"B115")
How do i make it so that i can copy this formula quickly, but so only the row and column reference change?
Like in C8 i would want it to look at cell C115, In C9, id want it to look at C116 etc.
View 2 Replies
View Related
Sep 28, 2006
I want to create a formula of the form: =INDIRECT(ADDRESS(4,2,2,TRUE,($A9) and insert this in a cell BUT the $A9 reference needs to reference the row of the cell where the formula is being inserted which will vary. ie. A30, A31, etc. How do I do this?
View 2 Replies
View Related
Jul 10, 2014
I am using the formula below to sum across several worksheets, and the formula I am using works fine, but when I copy the formula across to other cells, I can't figure out how to have it update my cell range:
=SUMPRODUCT(SUMIF(INDIRECT("'"&$A$1:$A$4&"'!A:A"),$B4,INDIRECT("'"&$A$1:$A$4&"'!G:G")))
The range A:A is ok to be static, but I need the G:G to be dynamic so when I drag it to the right it will change from G:G to H:H. I:I, etc.
View 6 Replies
View Related
Jan 24, 2012
Trying to use INDIRECT to sum the contents of a column on another worksheet upto a certain cell reference which is in another cell on the worksheet.
=SUM(INDIRECT("Sheet1!A4:Sheet1!"&B1))
I have taken it back to simply having sheet1 with numbers in A4 to A23, then sheet2 with A23 in cell B1, and the formula above it C9, but I keep getting #REF!.
The formula works fine if on sheet1 without the worksheet names in it. Formula evaluation gets to =SUM(INDIRECT("Sheet1!A4:Sheet1!A23")) then gives =SUM(#REF!)
View 6 Replies
View Related
Oct 10, 2008
I'm trying to switch my vlookups to something more dynamic. I keep adding columns to the data sheet (sheet1 for these purposes) and so I have to go back and update all of the other sheets that use the vlookup. (I'll just give an example as sheet2 for these purposes)
So what I have currently:
=VLOOKUP(A5,Data_All,4,FALSE)
Basically the 'A' column in sheet2 has an integer value, and so the vlookup takes that integer and looks up on sheet1 which row corresponds to that integer and then returns that string value.
What I want:
='AO_Cat_' & 'A5'
Basically I have named every cell in sheet1 and the particular value that I want to pull is named "AO_Cat_%name" with the last part being the integer value. I don't know if that make sense or not. For example, on sheet2, A5 might be '16' and so the value that I want to pull is "AO_Cat_16"
If I were to do this from the VBA side of things, then it'd be a simple range("AO_Cat_" & id_number) where id_number was the lookup value. However, I'd prefer to have this directly as a worksheet formula for simplicity purposes.
View 9 Replies
View Related
Oct 25, 2013
I roughly know what my equation should look like, but it keeps failing. Its all part of a wider spreadsheet but I will only put down that bits that impact this part of the sheet.
In my cell I need it to input a value from a different spreadsheet. The input value is text.
I currently use this formula and it works perfectly for what I need.
=(OFFSET(INDIRECT("sheet2!D"&$A7),R$6,25,1,1))
This would a return a variety of results such as "excluded","compliant","non-compliant".
I would like to arrange an IF function so that if the answer is Excluded to keep it as Excluded. But anything else to use this formula instead.
=(OFFSET(INDIRECT("sheet2!D"&$A7),(R$6-2),25,1,1))
View 3 Replies
View Related
Jul 15, 2009
I want to use a value in one cell as a row designation, and a value in another cell as a column designation. Ultimately, the values will be text which will refer to row and column headers. What formula would allow me to do this? example:
A1 contains B
B1 contains 2
B2 contains "tribbles"
An imaginary function might go like this........
View 3 Replies
View Related
Feb 17, 2012
Reduced to it's simplest form I have a formula
=1*(FY2012_TY), where FY2012_TY
is a Defined Name which refers to a column on another tab in the workbook, and is defined as:
=OFFSET(Table!$AA$3,0,0,COUNT(Table!$AA:$AA),1)
What I would like to do is to come up with an approach to this formula that would allow me to drag it across columns and have the year automatically increment (e.g., FY2013_TY, FY2014_TY, all of which are similarly defined Defined Names referring to adjacent columns). I have tried various approaches using INDIRECT along with CONCATENATE, but when it comes down to evaluating the formula, I consistently get a #REF! error.
View 4 Replies
View Related
Feb 1, 2009
I have an income statement with the cities on top (column header) and the expenses below it. There are 5 cities for example. The last line is net profit before it changes to the next city.
New York (column header)
Wages
Lights
Net Profit
Boston
Lights
Wages
Sales
Net Profit
How do you get the row reference for Boston Net Profit without using the offset or indirect function? (doing external linking with workbook closed) The formula would find Boston first and then look for the first net profit after Boston? The small if function may work for this.
View 9 Replies
View Related
Mar 2, 2014
File I have attached or made a link for here Untitled-2.jpg
I am trying to make that amazon cell, all text to appear as one line like the second line foreign conversion fee i want it to appear like that. Rather then having to delete and modify 100's of rows like this.
View 6 Replies
View Related
Aug 20, 2009
I have about 20 choices I'd like a user to select from and have the text output to a single cell.
Just create a Data Validation List? Yeah, but that only allows you to select ONE of the items in the list -- I want to select as few as zero and as many as all 20, combining the resulting text into a single string - space or comma delimited.
My first thought was checkboxes, but all I can seem to figure out is how to get ONE of the results into the cell, meaning I'm better off with the Data Validation List because it's easier.
Especially since I need to repeat this for as many as 200 or 300 lines,
View 11 Replies
View Related
Jan 17, 2008
I am writing a formula in cell "B1" in "December 2007 REVISED BY DAN.xlsm" that will reference cell "X1" in a workbook that has not been created yet.
The way I will tell the formula what the name of the workbook will be is by referencing cell "A1" and adding the extension ".xlsx" to it.
Example: ...
View 14 Replies
View Related
Feb 7, 2012
I have the following formula which i'm using to indirectly reference a worksheet. The worksheet i'm referencing includes named ranges that i'd like to call on but i can't get the syntax right.
Code:
=SUMPRODUCT(--(INDIRECT("'"&HH_Elec_Title&"'!B15:B19")>=D5),--(INDIRECT("'"&HH_Elec_Title&"'!B15:B19")
View 6 Replies
View Related
Oct 15, 2013
I am trying to use the sumif and indirect function together but I keep getting an error and I'm not sure why.
Actual formula:
=SUMIF('SWG OR'!B:B,A168,'SWG OR'!E:E)
Using the sumif/indirect function, I have the following:
> Cell B5 contains the name of the tab "SWG OR"
=sumif(indirect(B5&"!B:B",A168,B5&"!E:E"))
View 2 Replies
View Related
Jun 26, 2014
Just wondering if there is a way to indirectly reference a workbook in a formula?
For example, suppose A1 has the path/filename of the workbook I want to reference.
So in another cell I want to do, say, a VLOOKUP(A2,A1,5), where A2 is the lookup value. This way, if I have multiple workbooks I want to look at, I can specify them all in various cells, and simply have the formula look at the right cell to perform the lookup.
I've played with INDIRECT and get something close if I do
=INDIRECT("'"&A1&"'!A1:AJ1500")
but that just returns the contents of A1 in the target sheet.
View 1 Replies
View Related
Mar 12, 2008
I'm having difficulty referencing named ranges indirectly in a VLOOKUP formula (Excel 2003).
Cell A1 contains a fuel cost.
Cell A2 contains a formula that returns a RangeName.
In Cell A3, I want to enter a VLOOKUP formula that uses the range returned as the result in Cell A2 as the Table_array. In other words: =VLOOKUP($A$1,$A$2,2,FALSE). The result is #NA!.
If I use =VLOOKUP($A$1,INDIRECT($A$2),2,FALSE), I get #REF!.
Among other things, I've also tried =VLOOKUP($A$1,TEXT($A$2,"@"),2,FALSE). No cigar.
View 9 Replies
View Related
Feb 22, 2010
I have a worksheet with a name that inckudes a hyphen, e.g. 1234-5678.
And I have the worksheet name in a cell, say, I!.
Using
=INDIRECT(I$1&"!YADDA")
I get a REF error because of the inclusion of the hyphen in the worksheet name.
How can I fix this without eliminating the hyphen?
View 9 Replies
View Related
Jul 20, 2009
For making quotes at work, I'm looking to have the quotes named automatically. The format of naming our quotes is the date (in this format) then quote name: yymmddNAME (Example for today: 090720EXCEL)
I'm using the =NOW() function for the date (Cell A1), then doing a custom format to turn the format into yymmdd then in a different cell I'm putting in the "NAME" (Cell A2) and what I want to do is combine the 2 cells (Cell A3) by doing: =A1 & A2
but when i do this, the format of the date gets messed up.
View 2 Replies
View Related
Dec 1, 2013
I have the below macro which is failing to insert text into A1 of the Header Sheet, followed by the values in the designated cells that are from Sheet1. I would also like to have the values in cells J2 and K2 enclosed in single quotes.
Sub Header()
Worksheets("Header").Activate
ActiveSheet.Cells(1, 1).Select
ActiveCell.Value = "create or replace" & " '" & Sheet1.Range("J2").Cell.Value & "' " & " '" Sheet1.Range("K2").Cell.Value & "' "
End Sub
how do I get it into the nicely formatted version most of you are using? The Mr Excel HTML add-in?
View 2 Replies
View Related
Dec 9, 2012
I have been using the following formula to do conditional summing over multiple worksheets:
=SUMPRODUCT(SUMIF(INDIRECT("'"&$AB$2:$AB$13&"'!b3:b39"),$B16,INDIRECT("'"&$AB$2:$AB$13&"'!c3:c39")))
The formula works fine, but when I drag it to the next column c3:c39 stays the same. How do I get that reference to change when I drag the formula over multiple columns.
View 1 Replies
View Related
Apr 30, 2009
How would I used the indirect function to reference a named range in the workbook in formula creation.
For instance, if in cell A1 I have entered the text "Sales" which is also a named range in the workbook. Then in cell A2 I tried entering the following formula to sum based on the entry in cell A1 using the indirect funtion. For instance:
=sum(indirect(A1))
In this instance I was hoping this formula would then sum the amounts in the "Sales" named range. And, if I changed the text in cell A1 to "Cost" for instance (another named range in the workbook), it would sum the amounts in the "Cost" named range. Allowing for a dynamic formula based on the entry in cell A1.
I'm using Excel 2007.
View 9 Replies
View Related
Dec 3, 2007
COPYING indirect formula. When I copy, the lookup reference does not change. My formula is =INDIRECT("'"&$A247&"'!j106"). When I copy horizontally across cells, I want J106 to increase, ie j107, j108 etc. At the moment it remains at J106 and i have to manually increase the numbers by 1.
How do I change my formula so that the numbers increase automatically?
View 6 Replies
View Related
Mar 10, 2014
Cell A is the first name, B is a period, C is the last name, D is an "@" and E is "yahoo.com".
I want to squeeze them all together, in order, without spaces, into cell F to make an email address.
What is the formula ?
View 5 Replies
View Related
Apr 4, 2014
Basically I have an equation:
=SUMPRODUCT(G9:G11,H9:H11)/SUM(G9:G11)
It's just a simple percentage calculator for my purposes and works fine as is. However, I want to make it dynamic whereby from a user input the length of the array will increase or decrease, e.g. G9-G11 will become G9-G12 if there are four rows occupied with data. For all my other SUMming equations I have solved this and even came up with what I think is a perfectly valid solution for this one. The one problem is that it doesn't work when combined into a single equation.
My solution for the upper part of the fraction is this:
"A1"=SUMPRODUCT(INDIRECT("G9:G"&MIN(ROW(G9)+A8-1)),INDIRECT("H9:H"&MIN(ROW(H9)+A8-1)))
Where the user inputs the number of rows used in A8.
The solution for the lower part of the fraction is this:
"A2"=SUM(INDIRECT("G9:G"&ROW(G9)+A8-1))
[code]....
View 3 Replies
View Related
Dec 27, 2009
I am using excel 2007 and have the following information:
Cell A1: L6212- (formatted as text)
Cell B1: 05.50 (formatted as custom number 00,00)
When I merge the 2 cells using the concatenate formula I end up with
Cell C1: L6212-5.5
What I want is L6212-05.50
View 10 Replies
View Related
May 21, 2014
Attached I have a document where I am wanting all of the individual sheet names on the Total page. Rather than having to change each formula to match the sheet name I believe there is a way to reference the sheet name column (AO) in the formula so you can drag it down to fill in the columns. I am basic with Excel and do not know how to add this indirect function into my current formulas.
View 5 Replies
View Related
Mar 10, 2013
I have a list of headings and items and I have a set of formulas that work out depending on the heading what items are listed.
Say theres 10 items and the heading starts at C4 and that heading has 10 items, so it puts "C5" as text in G1 and "C15" as text in G2 so i now know my cell range of items
How can i use the text in those cells to put in a formula to call that as a range?
If I use the indirect formula it shows me the value of the cell, but im after using it to reference the cell
View 4 Replies
View Related
