I have been using the following formula to do conditional summing over multiple worksheets:
=SUMPRODUCT(SUMIF(INDIRECT("'"&$AB$2:$AB$13&"'!b3:b39"),$B16,INDIRECT("'"&$AB$2:$AB$13&"'!c3:c39")))
The formula works fine, but when I drag it to the next column c3:c39 stays the same. How do I get that reference to change when I drag the formula over multiple columns.
I am using the formula below to sum across several worksheets, and the formula I am using works fine, but when I copy the formula across to other cells, I can't figure out how to have it update my cell range:
=SUMPRODUCT(SUMIF(INDIRECT("'"&$A$1:$A$4&"'!A:A"),$B4,INDIRECT("'"&$A$1:$A$4&"'!G:G")))
The range A:A is ok to be static, but I need the G:G to be dynamic so when I drag it to the right it will change from G:G to H:H. I:I, etc.
I have this formula in excel 2007:
=COUNTIFS(Blad1!W:W;"1";Blad1!X:X;"H")+COUNTIFS(Blad1!W:W;"6";Blad1!X:X;"H").
Blad is Dutch for sheet, by the way.
In this formula, I want to let the ranges in Sheet1 be dependent of values in Sheet2. The formula itself is in Sheet2.
W must be replaced by the value of Sheet2!B12 and X to be replaced by the value of Sheet2!B9.
I tried this by using the INDIRECT formula, but the quotation marks of the search values are giving errors.
I need making a dynamic cell reference in an indirect formula, which looks at a different workbook.
The other workbook is called: ESF.xlsx
The sheet name in the other workbook is defined in Cell B2
The first cell i need to pull across is B115.
In cell B8, This is what i have so far:
=INDIRECT("[ESF.xlsx]"&B2&"!"&"B115")
How do i make it so that i can copy this formula quickly, but so only the row and column reference change?
Like in C8 i would want it to look at cell C115, In C9, id want it to look at C116 etc.
I want to create a formula of the form: =INDIRECT(ADDRESS(4,2,2,TRUE,($A9) and insert this in a cell BUT the $A9 reference needs to reference the row of the cell where the formula is being inserted which will vary. ie. A30, A31, etc. How do I do this?
View 2 Replies View RelatedCOPYING indirect formula. When I copy, the lookup reference does not change. My formula is =INDIRECT("'"&$A247&"'!j106"). When I copy horizontally across cells, I want J106 to increase, ie j107, j108 etc. At the moment it remains at J106 and i have to manually increase the numbers by 1.
How do I change my formula so that the numbers increase automatically?
A 'Days Attended' cell (N8) and a 'Days Absent' cell (O8). N8 needs to count the number of "Present" values there are on another worksheet. The other worksheet has dates across the top and names down the side.
When i use
=COUNTIF("Attendance!C9:Z9", "Present"),
and the next date comes along the formula changes to
=COUNTIF("Attendance!D9:AA9", "Present")
ie. the reference moves a column across - the new date's absent or present is not counted. Using =COUNTIF(INDIRECT("Attendance!C9:Z9"), "Present"). is no good because when i add a new name i need the row reference to move down as a row is inserted. ie. both person's formulas count the same row. So, my question: I need the columns to stay the same - C:Z (leyway for future dates) and the rows to change as i insert or delete people from the system.
Attached I have a document where I am wanting all of the individual sheet names on the Total page. Rather than having to change each formula to match the sheet name I believe there is a way to reference the sheet name column (AO) in the formula so you can drag it down to fill in the columns. I am basic with Excel and do not know how to add this indirect function into my current formulas.
View 5 Replies View RelatedHow do you make the Autofill function increment in blocks, e.g. instead of increment 1,2,3 increment 1,8,15 inthe following example: I have a 2 worksheets, one with days of the year across columns and values down rows, and another that summarises the sum of the corresponding days in weeks, so I have 365 columns in sheet 1 and 52 columns in sheet2. Everytime I update the sum range i cannot autofill it in the summary worksheet, as A1:G1 autofills to B1:H1, but I want it to increment to H1:N1.
View 3 Replies View RelatedI have worksheets named 1 to 100. In a different worksheet "Summary" I have a summary of data of those worksheets. I want to change the worksheet number automatically in a row by dragging.
For example, in worksheet "Summary" ....
I have a set of formula in column C to H. I have set a formula as sheet1+sheet2+ like this for about 24 sheets with different reference of cells. I want to change in the entire range of cells C to H as =sum(sheet1:sheet24!b04). The reference what I have mentioned changes in different cells.
View 9 Replies View RelatedI am trying to run a quick format on a table that includes adding a Vlookup formula. The formula references a table that comes out of a pivot table, so it has a different name every time. If I look up the new generated table name, and change it below it works. Is there a way to capture the table name and insert it into the formula? Or possibly rename the table to the same thing everytime (which I think is going to cause some conflict).
....
I have a master workbook that I reference data from hundreds of excels on.
I am trying to reference the cell "BU7" that has the workbook name (NT-13-001) in it, to reference sheet name "Purchase Order" at cell "H13".
Next line I would like to reference the cell "BU8" that has the workbook name (NT-13-002) in it, to reference sheet name "Purchase Order" at cell "H13".
The computer path is K:FRG TOOL REQ2013NT FormsNT-13-001
This is the formula I have tried... I have also attempted the INDIRECT function & Hyperlink GO TO.
=IFERROR('K:FRG TOOL REQ2013NT Forms["&DU7&".xlsx]Purchase Order'!$H$13,"")
I would like to drag down the formula from the last cell in Column A in reference to the last row in column B.
E.g My last data in Column A104 (code to select the last cell and this can vary from time to time the report is updated)
Column B has data till B142. I want to drag A104(contains formulas) down to A142.
Here is what I have but Selection Autofill doesn't work.
Range("A2").End(xlToRight).Select
Range("A2").End(xlDown).Select
Selection.AutoFill Destination:=Range("A3:A" & Cells(Rows.Count, "B").End(xlUp).Row), Type:=xlFillDefault
I have a function Sum('1st Qtr:4th Qty'!AW1) in row 1 and dragged down 129 rows so the last reads Sum('1st Qtr:4th Qty'!AW129). If I insert a row the cell reference does not increment automatically below the insert location. How do I get it to do so. The insertion occurs when I run a macro.
View 3 Replies View RelatedI have this If statement on one of the cells
=IF(A7=AQ6,AQ32,IF(A7=AR6,AQ32,IF(A7=AS6,AQ32,IF(A7=AT6,AQ30,IF(A7=AU6,AQ29,IF(A7=AV6,AQ33,IF(A7=AW6 ,AQ33,IF(A7=AX6,AQ31,""))))))))
If I want to change only A7 to A8, A9, A10 without changing the other parts of the formula, how do I do that. I need to copy this formula in about 300 rows.
I was using the formula below which was working fine for copying across 20 columns and down however many rows, but now the requirements have changed to 90 columns. I have tested this out with the 90 columns but the Indirect function is bogging down the spreadsheet with the constant recalculating.
=IFERROR(INDIRECT("'"&COLUMNS($A$1:A$1)&"'!P"&ROWS($A$1:$A8)),"")
I rearranged the formula to the one below, but how can I have the reference to the sheet name changed as in the formula above without using the Indirect?
=IFERROR(INDEX('1'!$A$8:$AT$115,MATCH($A3,'1'!$A$8:$A$115,0),MATCH("PAT",'1'!$A$7:$AT$7,0)),"")
The sheet reference will change from '1' through '90'.
When I copy the formula to another cell, It doesn't show the result. But when I double click on it, it works. For example
there r values in A1 as "john" & A2 as "Jack". I write formula =A1 in cell B1. It shows "John". Now I copy this formula to B2, it shows "john" instead of "Jack" . When I double click on B2 & enter, it shows "Jack".
I want to copy a formula from Workbook A to Workbook B and have the formula configured with Workbook B's spreadsheet cells, not Workbook A's.
View 2 Replies View RelatedI have a table of consolidated data that consists of the date at which certain payments occur and their amounts that other sheets need to reference to perform calculations. I am currently using the formula below to put the data under the correct date column. =INDEX(ImportedData!$B$10:$DB$10,MATCH(B3,ImportedData!$B$4:$DB$4,FALSE)). The problem that I have is that the INDEX range, currently B10:DB10, will need to change depending on the number of files that are consolidated ie with more files the row will increase.
View 2 Replies View Relatedhow I can have a formula repeat down a column five times before it changes to another formula? For example. Say on tab 1 I have a list of products. On tab two I have five codes that repeat down the page over and over again. On tab two next to the repeating codes I need to repeat product one 5 times and then skip to product 2 on the 6th row and repeat five times and then skip to product 3 on the 11th row and repeat 5 times and so on?
View 10 Replies View Relatedi need a macro which puts the formulas into the cells as per attached.
the number of rows between the "beam" can be variable
the number next to the beam will be variable.
the number of "beam" rows is vaiable
my thoughts where to do a find"beam" and refernce the cells address the create formulas off those points but dont have the skill to code this
beam macro.xlsx
I am trying to cut/paste a row of formulas in my spreadsheet. The problem is that I want some of the referenced cells in the formula to stay CONSTANT and not increment on each new row. In this example, I want the references to row 17 (F17,E17) to increment (E18,E19,...), but I want the "G7" reference to remain hard coded (as G7) on each row I paste (because that is where my master value is). (The formula is working fine) =IF((F17>0),IF((F17<=G7),E17,0),0)
View 3 Replies View RelatedSo I'm dragging my formula down one cell and as expected the reference cell changes the same amount when I really want the reference to shift Down that column 11 cell so when I take my formula
=IF(ISERROR(LOOKUP(21474836472147483647,'Revenue Book'!L5:L11)),"",(LOOKUP(21474836472147483647,'Revenue Book'!L5:L11)))
when I drag it down one cell the reference should look like this
=IF(ISERROR(LOOKUP(21474836472147483647,'Revenue Book'!L16:L22)),"",(LOOKUP(21474836472147483647,'Revenue Book'!L16:L22)))
i want to change the table_array reference without changing formula in every worksheet. I tried using a new worksheet and naming it the same as what is referenced in vlookup table_array but it messed up all the data.
I have to use a different worksheet every month so need a way to change reference OR how to change array data without messing up the worksheets with the vlookup
how to change the formula below which is referencing an internal worksheet, to a forumula that will reference an external worksheet that is located in an excel document on the G: Drive.
=SUMPRODUCT(--(1210laradj_v_2009!F2:F65536="HMO-ALT SELECT"),--(ISNUMBER(MATCH(1210laradj_v_2009!AO2:AO65536,{3,5,9,12,37,39,46,47,54,73,74,75,76,77,78},0))))
So what it's doing is totaling the counts in the 1210laradj worksheet that match columns HMO-ALT SELECT as well as the numbers 3,5,9 etc.
Well now these worksheets will be on a seperate excel spreadsheet located on a network drive, so I am trying to figure out how I can fix this.
I tried adding it in like so, but it fails.
=SUMPRODUCT(--('G:ROC-CLAIMSAudit ResultsProvider infomonthly statsReproc'd claims2011ProductionCounts[0111rpt2235_laradj_v.xls]0111laradj_v_2009'!F2:F65536="HMO-ALT SELECT"),--(ISNUMBER(MATCH(1210laradj_v_2009!AO2:AO65536,{3,5,9,12,37,39,46,47,54,73,74,75,76,77,78},0))))
need to do to the below code so that when i drag the formula down it changes the sheet number....sheet1, sheet2, sheet3 and so on but keeps the cell reference the same?
View 4 Replies View RelatedReduced to it's simplest form I have a formula
=1*(FY2012_TY), where FY2012_TY
is a Defined Name which refers to a column on another tab in the workbook, and is defined as:
=OFFSET(Table!$AA$3,0,0,COUNT(Table!$AA:$AA),1)
What I would like to do is to come up with an approach to this formula that would allow me to drag it across columns and have the year automatically increment (e.g., FY2013_TY, FY2014_TY, all of which are similarly defined Defined Names referring to adjacent columns). I have tried various approaches using INDIRECT along with CONCATENATE, but when it comes down to evaluating the formula, I consistently get a #REF! error.
I have an income statement with the cities on top (column header) and the expenses below it. There are 5 cities for example. The last line is net profit before it changes to the next city.
New York (column header)
Wages
Lights
Net Profit
Boston
Lights
Wages
Sales
Net Profit
How do you get the row reference for Boston Net Profit without using the offset or indirect function? (doing external linking with workbook closed) The formula would find Boston first and then look for the first net profit after Boston? The small if function may work for this.
Is there anyway to add text to an INDIRECT reference so that it will now reference a new range?
For instance, this is my formula...
=IF(INDEX(INDIRECT("A1+TM"),MATCH(B2,INDIRECT(A1),0),1)="","-",INDEX(INDIRECT("A1+TM"),MATCH(B2,INDIRECT(A1),0),1))
I am trying to say, if the cell 1 column to the left of the cell that matches the text in B2, in the cell range referenced in A1 (CWS) "added to the text "TM", is blank, then write "-", otherwise return the number in the cell 1 column to the left of the cell that matches the text in B2, in the cell range referenced in A1 (CWS)+"TM".
Cell A1 is a data validation list that refers to different ranges. The only difference between those named ranges and the named range I want to reference is the text "TM" comes at the end.