Combining Two Macros Results In Error Message
Jun 30, 2009
Note: It should also be noted that, when "splitting" the macros below up into two different macros, they work, but then I have to play 2 macros when I only want to play one.
Just when I thought I was getting this macro stuff, I've come back to reality. I tried to combine these 2 macros together (taking out 1 "sub" and 1 "end sub") and when doing so, I got the error message
"duplicate declaration in current scope"
I thought about removing some "Dim" lines, but realized that the Dims say different things. For example in macro 1, it says "Dim Rng As Range" and in macro 2, it says "Dim Cust As Range".
Don't I need both? Do I put in an "exit sub"?
View 12 Replies
ADVERTISEMENT
Mar 25, 2013
I got 2 macros that I want to run in one go. So to explain:
Here is the data of Sheet1 before the macro is run:
A
B
C
D
E
[Code]....
Keep in mind, when Macro2 is run it puts the data on Column W then X then Y etc as soon as the Column reaches 20 it moves on to the next one.
So my question is:
Is there anyway to combine both macros to just run it once instead of running it individually?
View 4 Replies
View Related
Jan 12, 2007
I have two macros that I need to run as one and I am not sure how to call the second macro from within the first. I'm sure it's easy...If you know how... Thank you in advance.
--------------------------------------
macro 1
Sub PrintUsedRange()
'
Dim ws As Worksheet
'
For Each ws In Worksheets
Application.CutCopyMode = False
ws.PageSetup.PrintArea = ws.UsedRange.Address
With ws.PageSetup
.Zoom = False
.CenterHorizontally = True
.Orientation = xlPortrait
.FitToPagesWide = False
.FitToPagesTall = 1
End With
Next ws
ActiveWorkbook.PrintOut............
View 9 Replies
View Related
Sep 26, 2008
I would like to combine the following 3 macros into one macro. Try as I might, I can not figure out how to do it?
Sub DeleteEmptyRows()
Dim Counter
Dim i As Integer
Counter = 5000
ActiveCell.Select
For i = 1 To Counter
If ActiveCell = "" Then
Selection.EntireRow.Delete
Counter = Counter - 1
Else
ActiveCell.Offset(1, 0).Select
End If...................................
View 9 Replies
View Related
Mar 12, 2014
I have a userform that has the same type information on 3 different entities (name, address, phone, etc). The same research is required on each one i.e. you need to look up the zip code for each). Therefore I have a bank of buttons on each page of the multipage form. Each button does the same thing depending on which page you are on. The following is my code to copy some information and open another application depending on which page you are on and which type entity.
My question is how can I combine these into one so my module is not 3' long.
View 1 Replies
View Related
Nov 6, 2008
This code calculates a value for column K when you punch in a number in column J (in any rows 17 to 116, separately). The first problem is that when you delete a value out of J, the value stays in K for some rows (where it should only contain a value if J does). I'm guessing it has something to do with the triggering event that I put in bold. Secondly, I need to be able to protect row K at all times from deletion or entering another value. It ONLY should calculate a value based on J. So I need to use the module (below the code) and I want to integrate it into the code or call it in a module. It's not working properly because it prevents ANY and ALL changes, even the ones caused by new values entered in J (which should be allowed). It should only prevent deletion or manually entering a value on the worksheet. So the bottom line is that when you enter a value into J, unless column E says "Annuity" it will calculate using the formula given. If you delete J, K should go away as well. And at no time can you delete or manually change K. And when you switch values in E, it must reloop to check if it says "Annuity" or not, and if not, it must clear J (which clears K).
And lastly, this thing is brutally slow, so maybe there's an easier way to write it. Sorry for all the detail, but I think it's an easy fix for someone who knows programming, but i don't know how to put it together! NML Inventory is the Activesheet.
View 6 Replies
View Related
Jun 20, 2007
If I have the following table:
Name ProductSize QuantityPrice per unit
AX35510
AX451015
AX551210
BX601010
AX35510
I now want a resulting table that will combine all rows where name, produc, size and price are identical and have one row with the same data apart from the quantity that will have been added - so for the table above the resulting table will be:
Name ProductSize QuantityPrice per unit
AX351010
AX451015
AX551210
BX601010
View 9 Replies
View Related
Nov 24, 2009
I am using the following code to identify any blank rows in a sheet and delete them:
View 3 Replies
View Related
May 20, 2009
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
View 14 Replies
View Related
Apr 3, 2009
Everytime I open the excel file I am working on I get a message saying that the file contains macros.
I have deleted all the macros I could find under "Tools" and "Macros" but I still get Module1.sortie, sortie and sortie listed. I can delete Module1.sortie but for the other two, sortie and sortie, I only have the "cancel" and "create" options.
View 14 Replies
View Related
Apr 17, 2008
Whenever I open an Excel file that has macros in it, a message always pop up and ask if I want to enable or disable the macros.
Is there a way to get rid of the message?
View 9 Replies
View Related
Aug 28, 2008
i want my application which i build though VBA in excel run on every computer without prompting for any Macros security message so is there any solution?
View 9 Replies
View Related
Oct 3, 2013
I have several workbooks that use macros from my personal macro library (MyExcelAddIns.xlam).
Some of these, especially new ones, get an error message every time I save them: "Privacy warning: This document contains macros, ActiveX controls, ... These may contain information that cannot be removed by the Document Inspector."
Then after I save it once or twice, the message goes away. Why am I getting this message? Why only sometimes? What can I do to get rid of it entirely?
View 3 Replies
View Related
Sep 30, 2008
I have a couple of basic macros that edit formatting in a sheet that I want to send out to various people. The problem is, when I change the file name of the worksheet - the marcos stop working as they refer to the actual original file name.
Could someone please advise if (I am sure it must be somehow) it is possible to emmend the Macros in some way so that they continue to work regardlesss of what the end user decides to name the worksheet.
View 9 Replies
View Related
Jul 14, 2009
What is the code to enable macros upon opening a workbook and avoid receiving the message "Security Warning-Macros have been disabled" in Excel 2007?
View 3 Replies
View Related
Dec 6, 2009
I have a work book with several (couple of hundred) buttons, which when clicked display the contents of a range of cells in a message box as shown below;
View 4 Replies
View Related
Aug 17, 2006
When you enable macros the sheets 2, 3, 4 ect are visible but if you disable macros, you only see sheet 1 and and you can place a message on the sheet saying this will only work with macros enabled.
View 2 Replies
View Related
Aug 17, 2008
For some reason my form won't open when the workbook is opened. I get an error message "run time error '424' object required" (which happens when I have Form1.show in the BOTH workbook_open event and the userform_initialize event (oops)). When I removed form1.show from the userform_initialize I don't get an error but I also get no form. I recall having this issue before but I can't recall how to fix it.
Can I call the userform_initialize event from the workbook open event to get around this successfully and properly?
View 9 Replies
View Related
Nov 2, 2007
I do hit the SCE (Shift-CTRL-Enter) keys. The formula does work in one workbook, but not the other. The only difference between the two workbooks is this formula has a larger range.
New Formula- doesn't work (ERROR- #DIV/0!)
{=AVERAGE(IF(Sheet1!A3:A1094="MONDAY",Sheet1!E3:E1094))}
Old Formula- works
{=AVERAGE(IF(B6:B451="MONDAY",E6:E451))}
View 9 Replies
View Related
Jul 16, 2008
When I input the formula : =(G9+G16+G23+G30+G37+G44+G51+G58+G65+G72+G79+G86+G93+G100+G107+G114+G121)/17
I get the error message #VALUE!
View 9 Replies
View Related
Jan 11, 2009
I have one line of code that I need an error message for:
View 2 Replies
View Related
Feb 3, 2014
I get spreadsheets sent to me with hours and minutes in decimal format. Frequently a quarter of an hour or three quarters of an hour are posted as 0.15 or 0.45 instead of 0.25 and 0.75. Other odd fractions can also appear.
I want an error message if the value when divisible by 0.25 is not a whole number.
View 6 Replies
View Related
Dec 15, 2006
I am trying to run the macro and I get this error:
Compile Error! Sub or Function not defined
for the following
RFQnum = VLookup("RFQ Number", CPARSdata, 2, False) 'RFQ# should be same for each supplier
CPARSdata is a named ranged with 25 columns and 338 rows
View 9 Replies
View Related
Dec 28, 2006
I would like to get some information when a vba code is in error.
Can we create a sub that we can refer to when a vba code is in error. Something as:
On Error goto "name of the sub"
In that sub, I would like to write in sheet1 , cell a1 the name of the sub in which the code is in error.
In cell a2, i would like to write the line in error in the VBA code.
finaly i would like to show a msgbox ("Contact your admin")
and then close the file
View 9 Replies
View Related
Jul 17, 2007
I am getting the error message
"Compile Error: End If without block If" for the code below :
ErrorHandlerRoutine:
If MyInteger = 1 Then
MsgBox "Data does not exist in the CO2 data set"
End If
Resume 1
If MyInteger = 2 Then
MsgBox "Data does not exist in the Water data set"
End If
Resume 2
If MyInteger = 3 Then GoTo 3
MsgBox "Data does not exist in the Waste data set"
End If
Resume 3
View 9 Replies
View Related
Jul 29, 2008
I need an error message to pop up if 3 cells contain the same data
The range of these cells would be G19 to G49
Ideally the error message would say "Rules Broken"
Also if possible could the same message be shown if the value of cell J52 exceeds 50,000000
View 9 Replies
View Related
Jun 11, 2009
I wanted to make a pop up alert message appear whenever the formula in a cell gives a particular output.
Before posting this i tried looking for similar posts before, but the ones found do not solve my problem. There it asks me to write the following code in VBA,
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As String
MyRange = "A1"
If Me.Range(MyRange).Value = "Have Meeting" Then
MsgBox "Have Meeting"
End If
End Sub
But my doing so, I can not use any formula in the cell A1 or any other cell i give reference as MyRange. I will always have to physically type "Have Meeting" or any other word assigned in the above.
View 9 Replies
View Related
Aug 24, 2009
I am writing some code to do a comparison between two cells X2 or AB2 with an X which checks to:
1. make sure one of the two are filled, or
2. both are not filled.
Below is an extract of the spreadsheet I am working on. I need to check to make sure one of the boxes is checked. If both are empty or both filled with an ("X"), I want a message box to tell me to correct the error and stop the macro from continuing. If only one is marked with an ("X"), I want the macro to continue but don't know how.
RSTUVWXYZAAAB
2IN PROGRESS: COMPLETED:
View 9 Replies
View Related
Dec 28, 2009
Using Excel 2003
I am receiving an #Value! error message from my sumproduct formula:
=SUMPRODUCT((Data!$A$2:$A$47=G$2)*(Data!$B$2:$B$47=G$4)*(Data!$A$1:$N$1=$B21)*(Data!$A$2:$N$47))
As follows:
Data!$A$2:$A$47 is a date
G$2 is a date within the context
Data!$B$2:$B$47 is a unit number
G$4 is a unit number within the context
Data!$A$1:$N$1 are descriptive titles
$B21 is a decriptive string within the same context (copy paste)
Data!$A$2:$N$47 are to be summed is all criteria are met.
View 9 Replies
View Related
Jun 7, 2006
I have a vba code that I wrote out to search for a file and update data on a spreadsheet with the new file... however I've come to a point where I'm not sure of what code to use. If I search for a file that is not there I get a runtime error and of course it ask me to end or debug. What I would like for it to do instead is search for the file and if it is not there... display a message box stating that the file searched for is not found and automatically closes the workbook after OK is pressed.
Here is the code for those who may need it....
View 7 Replies
View Related
