I have a work book with several (couple of hundred) buttons, which when clicked display the contents of a range of cells in a message box as shown below;
View 4 RepliesI am using the following code to display a range of cells from a single column (A1:A10) in a message box, with each cell value on a seperate line.
View 7 Replies View RelatedCan I display the contents of a range of cells in a message box?
View 4 Replies View RelatedI need to check a range of cells (B4:B35) and see if any of the contents are less than a specified cell (M1) and then show a message, (the message part I can do). I have tried using For Each but I then get the message for every cell that is below the specified cell (which in theory could be all of them). I have also tried using an If Any statement but didnt work.
View 5 Replies View RelatedI have attached an example spreadsheet with two tabs. The first tab (Matrix) shows raw data scores - there are 28 measures in Column A and Participants in Row 1. There are always 28 measures but participants can vary. What I need to happen is to sort each measure in a Lineup tab i.e. rank all the participants listed in the Matrix tab from lowest score to highest score for each of the 28 measures. Obviously this can be done manually but a VBA/macro solution will be so much faster and easier. Unfortunately I have to keep the data in this format so the macro will need to transpose the data to get into the formt in the Lineup tab.
View 9 Replies View RelatedI've got a spreadsheet where i need the user not be able to save the workbook if there is a blank row in a range of task which run from A4-last cell with data entered.
I would like it to say that "the row will be deleted, please amend"
After the check has been completed or varified it saves
i have a userform with a text box in it a i would like to display all the values in a named range called "emp1"
View 4 Replies View RelatedI use 2010 and I will try and I need to complete a relatively simple project that I am working on.
I have a range of cells, "D7:Q30". This range has numerical values that are updated automatically (every cell within the range has a numerical value) from an "old value" to a "new value". The refresh rate is not constant, that is the values may change at any time depending on when a value changes I think it is called "pushed" data. Once a value is updated ("new value"), it stays at that value until one of the updates changes its value (and then it becomes the "old value").
I would like a message box to display the following EACH TIME A CELL CHANGES ITS VALUE when the NEW updated value is LESS THAN the OLD value:
"B51, B52, **5, has a changed value from "old value" to "new value".
The ** above in the message box represents the following: If for example cell F23 changes, ** in the message box should be the value that is in cell F5. If Q10 changes, the ** value in the message box should be Q5. It will always be the value in Row5 but have a different column depending on where the change is detected.
B51 is the text value in B51..same for B52 (text) etc...these values change depending on what spreadsheet I have open, but will always be in those cell positions. But the values within the range D7:Q30 are always numeric.
I have some dynamic named ranges in sheet1, and in sheet2 I have data validation dropdown list which has the names of all the DNR's in it.
What I want it to do (in sheet3, no less) is for the user to be able to pick a named range from the dropdown list, and have a particular column in sheet3 then display that entire named range.
I have made a 'data' worksheet which is the source for the data validation in sheet2. Each item in the list identically matches the name of each of the named ranges. I was hoping to be able to use some form of =INDIRECT but alas, no such luck.
So it's almost like a copy and paste function I'm after, where:
If you pick "Schedule_From" out of the DD-list, then DNR 'Schedule_From' is what is pasted in Column B in Sheet3.
DON'T want to use a PivotTable.
I want to display a warning pop up message when the following cells (Cell A1:A10) is greater and equal to 3.
I would like some code in VBA
I have a few columns referencing Crash numbers. The majority of each column is a null value, with about 10-20% of it actually containing the number of a Crash. I want to run one MODE each on a column to see what the most common Crash is.
The following
=MODE(Table_X[Crash Alpha])
Results in a #N/A Value Not Available error. What do I need to change to make it work on the column with some nulls and some numbers (no strings)?
As a secondary question, if I wanted to apply a date filter (the columns are part of a table, including a Date column) like the below:
If(Table_X[DateTime]>F9,If(Table_X[DateTime]<F9+1, etc.)
(F9 being the location where my filter Date is)
Where would I apply that to the Mode? Should I just change it to an If statement, with the Mode positioned like so?
=If(Table_X[DateTime]>F9,If(Table_X[DateTime]<F9+1, MODE(Table_X[Crash Alpha]))
In cell E12, I have a drop down list of choices. I am using a code that will display a message box whenever a particular choice is picked from that list.
View 12 Replies View RelatedI've got the following table (see attachment). In a column A there're the articles and some of them appear several times. In column B there's the quantity. The goal is to get in column C the sum of quantities in column B for the repetitive articles in column A and then delete the repetitive articles.
so the table should look like:
3RD125070442H 30
3RE071870493H 4
3RI100009624T 15
in excel 2007 I found only the function to remove the duplicate cells but I need to get the sums before removing them and have no clue how to that.
I'm using a macro to copy the results of a formula and paste the values only on another sheet. The result includes lots of "blank" rows. I have another macro to get rid of the empty rows and move the information up.
It's not working because the "blank" rows aren't empty. Even though I paste values only, experimentation shows that the cells that appear blank return a false to the ISBLANK test with a length of 0.
So now I think I need a macro to run after the pastespecial command to look for cells within a range with a length of zero and delete the contents of those cells, but leave alone anything with a length of >0.
I am brand new to the idea of using VBA, but I have successfully cobbled together some stuff and can usually modify things to work.
It seems I need to maybe use some sort of IF statement along with a LEN and ClearContents. I don't want to delete the blank cells, just make them truly empty so that all of my actual data stays where it should, and my delete empty rows macro works correctly.
I did a search and see some info on clearing contents of columns or rows, or clearing contents based on the content of other columns or rows, but I'm unsure of how to tell it to search each cell within a range and clear the contents of 0-length cells to make them truly empty.
How to send a range of cells in a sms text message by using Visual Basic for Applications in Excel?
BTW: I really need this to work for my job! So any feedback would be greatly welcomed. Please read below to understand what I'm trying to do. I need to be able to send my guys their daily goals via sms text message:
The following works great for sending a range of cells in a email message: ....
I am just learning VBA. I need to move to a cell location that is named in a range. As follows:
The cell "Sheet2!A1" has a formula that results in "Sheet1!B3". I would like my VBA code to read that cell and select Sheet1!B3. When using something like:
Application.GoTo Range("Sheet2!A1")
I end up of course at Sheet!2A1. I want to end up at Sheet1!B3 or wherever the cell reads at the time the code is read and operated on.
Everytime I open the excel file I am working on I get a message saying that the file contains macros.
I have deleted all the macros I could find under "Tools" and "Macros" but I still get Module1.sortie, sortie and sortie listed. I can delete Module1.sortie but for the other two, sortie and sortie, I only have the "cancel" and "create" options.
Whenever I open an Excel file that has macros in it, a message always pop up and ask if I want to enable or disable the macros.
Is there a way to get rid of the message?
i want my application which i build though VBA in excel run on every computer without prompting for any Macros security message so is there any solution?
View 9 Replies View RelatedWhat i am trying to do:
1) check whether any value in column J, rows 7-18 is changed,
2) check whether the value is above the value in col H, respective row multiplied by 1,25,
3) if point 3 true, clear the contents of cells E24, F24, and show up a messagebox,
4) run another macro by pressing button in cell C24 in order to fill the E24 and F24 cells again.
What happens: Points 1-3 work perfectly well, but then i have a problem in point 4 - the messagebox of point 3 appears again and the work of macro of point 4 interrupts showing an "Application-defined or object-defined error".
The file with the code is attached : Example.xlsm
I have a worksheey of data and i would like the tab to be a certain colour dependant on the the contents of a range of cells within that worksheet is that possible. i know i need to use VBA and it cna be done based ont he contents of one cell.
So for example i have a sheet of people i am awaiting payment from, based on the last column " bill paid" i want the tab to be Red if there are any blanks in this column/ range and go green when all the cells in the column/ range are filled with "y"
I am trying to clear the contents of a range of contiguous cells (containing formula) in Excel 2010 64bit. But it is taking a LONG time (read >30min to clear a range 288 x 100). Originally was doing it in VBA but it was taking too long so I started stepping through the macro and identified that the slow down was occurring on a particular sheet only. So the problem is in Excel....not VBA because it is still very slow when deleting the same range in Excel without using VBA.
I've tried all the usual suspects including: Application.EnableEvents = False (run from the VBA Immediate window when using Excel without VBA), Setting to Example of slow clear contents5.xlsxExample of slow clear contents5.xlsxManual Calculation, Turning off screen updating, deleting all the conditional formatting on the sheet, removing any data validation from the sheet (yes all these at the same time). There are no links to external workbooks. I've even tried in VBA changing from .ClearContents to .Value = vbNullString. All to NO AVAIL! By way of background the file is about 72Mb #.xlsm.
If I try to clear contents of larger ranges on other sheets in the same workbook it is instantaneous. If I copy the problem worksheet off to a new workbook, I can delete the problem range almost instantly. Why deleting a range of cells should take so long! Again to clarify, I am using the terms "delete" and "clear contents" interchangeably, but they both mean "clear contents" (not delete and move up cells). P.S I've also looked into the reported conflict between Excel and Google Desktop Office Add-in (Office Button->Excel Options->Addins->Com Addins and deselect Google Desktop Office Addin) but I didn't have Google Desktop Office Add-in so it isn't that.
I have a range of cells each containing different values. Each of these different cells has a related date contained in the row underneath.
I want to be able to search the range of cells and find it in the contents of a cell and return the corresponding date from the row below.
Excel 2010
A
B
C
D
E
F
G
[Code]...
Row A4:O4 is the range of cells to be tested. Row A5:O5 are the corresponding dates. Cell B1 is the value I want to search for and B2 is where the date I would like to appear.
In the example shown I'd like 01-Sep to appear in B2.
I'm using Excel2010 and Windows 7.
Note: It should also be noted that, when "splitting" the macros below up into two different macros, they work, but then I have to play 2 macros when I only want to play one.
Just when I thought I was getting this macro stuff, I've come back to reality. I tried to combine these 2 macros together (taking out 1 "sub" and 1 "end sub") and when doing so, I got the error message
"duplicate declaration in current scope"
I thought about removing some "Dim" lines, but realized that the Dims say different things. For example in macro 1, it says "Dim Rng As Range" and in macro 2, it says "Dim Cust As Range".
Don't I need both? Do I put in an "exit sub"?
I have several workbooks that use macros from my personal macro library (MyExcelAddIns.xlam).
Some of these, especially new ones, get an error message every time I save them: "Privacy warning: This document contains macros, ActiveX controls, ... These may contain information that cannot be removed by the Document Inspector."
Then after I save it once or twice, the message goes away. Why am I getting this message? Why only sometimes? What can I do to get rid of it entirely?
I'm having a problem in a single line of code in which I'm using a Range Object to essentially select an area of cells whose contents I want cleared.
Here is the
Sheets(Left(c.Value, Len(c.Value) - 1)).Range(Cells(4, 2), " &:& ", Cells(Rows.Count, "b").End(xlUp).Offset(0, 9).Select).ClearContents
I want the range part to evaluate as (b4:whatever the last cell is before the first blank row).
There will be anywhere from 1 to 5 values in each of these columns, but not
successively. There will be several blank cells inbetween these nonblank
cells, which I need stacked neatly into the first five rows at the top of the
worksheet.
Example:
(A10) - Apples
(A17) - Oranges
(A23) - Peaches
(A38) - Some other fruit of your choice...
(B14) - Toyota
(B21) - Honda
(B44) - Mercury...........
in column A of a spreadsheet a date needs to be entered manually, however i cannot have it so it can be backdated or a weekend. I have seen a message box pop up if you try and enter a date prior to today saying , Please enter todays date , then gives you an option Retry Or Cancel. But im not familiar with this function.
Is it possible to have this if a date is enter and is either a weekend or a date less than today ?
What is the code to enable macros upon opening a workbook and avoid receiving the message "Security Warning-Macros have been disabled" in Excel 2007?
View 3 Replies View RelatedIn my excel sheet i have few results displayed in range (same row different column with few banks cells in between). No i wish to display the most repeated value / result from that range into another cell on a different sheet of the same workbook. Can somebody help please.
Please note that the data (that is displayed in the cell rage from where i wish to get the most repeated one) is a the result of a nested IF statement.
16 minutes ago