Name ProductSize QuantityPrice per unit
AX35510
AX451015
AX551210
BX601010
AX35510
I now want a resulting table that will combine all rows where name, produc, size and price are identical and have one row with the same data apart from the quantity that will have been added - so for the table above the resulting table will be:
Name ProductSize QuantityPrice per unit
AX351010
AX451015
AX551210
BX601010
A transportnumber can have multiple instances of itself, such as 106200. This transport number can also have multiple instances where the postcode is the same. These are the rows i want to combine
So shortly: Transportnumber double/triple...+ Postcode double/triple...= combine these rows.
if only transport number is double, or only postcode, then dont combine. I want it to combine 2 columns of values, one will b the kgs, other one a price.
So example of end result for 106200 would be 106200 8500 value+value (these 2 rows matched so it combined the 2 values i want it to) 106200 8600 value ( this was unique so it stays unique)
On sheet "master" I have a list of goals in column A.
Each has been assigned to at least one person. Each person will have their own sheet that will capture the goals assigned to them. As an example, see Al's sheet.
I am trying to get Excel to look for all of the goals assigned to AL on the Master sheet and list them nicely onto AL's sheet without out blank rows. (and for each, respectively on their own sheet). I could do this with Pivot Tables if the data were displayed differently, but I have been told that I have to display the goal assignments as shown.
I could use "x"s instead of their names to mark the assignment and I could combine the "goal-achieved expectations" and "goal #s" columns if it helps. I am not supposed to use filters either.
Note: Of course, a goal or an assignment could change on the master sheet, but the assignment is more likely to change.
how this done for AL, I can go ahead and create the other sheets.
Note: It should also be noted that, when "splitting" the macros below up into two different macros, they work, but then I have to play 2 macros when I only want to play one.
Just when I thought I was getting this macro stuff, I've come back to reality. I tried to combine these 2 macros together (taking out 1 "sub" and 1 "end sub") and when doing so, I got the error message
"duplicate declaration in current scope"
I thought about removing some "Dim" lines, but realized that the Dims say different things. For example in macro 1, it says "Dim Rng As Range" and in macro 2, it says "Dim Cust As Range".
I am looking for a VBA that could populate from column (A2:A5) to cells (B2:F5) as in the attached spreadsheet, based on the frequency, in a five year time-frame.
I am getting an error i have list (sheet4) i want to lookup the data from different table (Name range) based on the location in column A i am using the small function copy down, in cell C6 i want the range ROWS($A$2:B6) go back to ROWS($A$2:B2) since the criteria in column A has changed from China (A5) to US (A6)
I'm trying to create a formula that tells me the following:
If the item is marked as closed (vs. active), then how many renewals/terminations replacements/etc are there? These are two difference columns in a worksheet.
automate a data table I set up in excel. I need the formula to look through a bunch of raw data I have, and add quantities in each row, but only from the rows that have the same machine numbers. I attached the document of raw data I've collected, and on a separate tab, an organized table. I would like this table to automatically be updated with the appropriate data, as I enter it as raw data.
I have a huge list of survey responses which asks people to identify their location and then rate how important 6 facilities in their area is (rating 1 - 4, 4 being most important). So the table has cells are similar to this, except that there are about 5000 responses with about 2500 different locations identified
Location Location Location
[Code].....
I have been able to analyse the average results for the whole dataset by using the following formulas:
=COUNTIF(A2:C4,"camden") Count number of occurrences a location is listed =ROUND(AVERAGE(D2:D4),2) Average response for medical centres =COUNTIF(D2:D4,1) Counts number of times '1' comes up, would repeat '2', '3', and '4' to create a pie graph
But what I would really like to do it be able to count each response for each question by location (for example "Camden"). I've tried both of these but they don't seem to be working.
Each week I run a report that produces over 2,000 rows. I have to manually go through and delete things, by the time I am done, there may only be 320 rows left. I would apply a recorded macro, but the report is not consistent each week. There may be more or fewer rows depending on the week.
I would like to be able to run a macro that looks in column B for a specific value and if it contains that specific value, I would like the cells to the right of it to have their contents cleared.
Next, in column C, I have...
Employee2's Name Employee2's Number SPACE
[Code]....
I would like to be able to delete the rows, starting from Employee 2 to just before the second SUB TOTAL.
Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g. AAA blue BBB orange AAA round CCC smelly AAA elongated
Worksheet 2 I want to show: A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g. AAA blue round elongated BBB orange CCC smelly
I looking for a macro that will go through multiple sheets & change specific cells to values if the column header is = to value set in specific cell.
for example
I would like the macro to look at row 3 in each tab (page 1, page 2, page 3) and if the value you is equal to X (parameter input on different sheet) then change the formula to a value in row 6 & row 12 of that column.
I'm attaching an simple example that i looking for this on. The green cells are the one i would like to change to a value.
I'm racking my brains as to how I can structure a formula to conditionally rank a value in an array against only those values in the array whose corresponding criteria cell includes a specific letter.
So for example I have a list of 12 values, say 126; 239; 0; 171; 162; 157; 130; 199; 122; 153; 0; 15. Each of those values corresponds to a heading, say: CDE; DFE; FGE; DFE; ERD; DEA; BDF; DFB; CDE; CEF; CAB; FAB. As you will note some of the headings may or may not be the same and may or may not include the same letters in different orders.
How can I write a formula that ranks in ascending order a given value drawn from the above list (which will be in another cell but which in this case is, let's say, the first value: 126) only against those values whose heading includes a specific character, for example the character C (the character in question will vary and be defined in a specific cell).
As an added complication I need the ranking calculation to exclude any zero values. So in the above example what the formula needs to do is rank the value 126 against a sub-set of the whole array comprising only the values 126; 122; 153; 0.
The answer I need is 2 because, discounting the zero value, 126 is the second highest value.
I have received a 'data dump' from a local county assessor. It is formatted for their use in displaying on their website. This particular file associates a parcel number with the legal description. However, with longer legal descriptions, they have replicated the parcel number and continued the description. The fields in the sample I have attached include (A) as the parcel number (which is common through all the files), (B) a county id, (C) the order that this specific portion of the legal description shoud be, and (D) the legal description, itself. In the sample you will see one specific parcel number that repeats itself more than 20 times, while other parcel numbers only appear once. What I hope to do is have one row for each parcel number with no replications. I hope for (A) be the parcel number, (B) be the county id, and (C) be the combined legal description. There should be approximately 275,000 unique parcel numbers.
A second option would be to move the lower continuations up, into the same row. For the example above refering to the 20 rows of legal description, I can work with 1 row and 20 columns(E through Z).
The provided coding was perfect, my problems were found to be the environment I was working. Once the data was prepared properly, the coding worked very well.
I would like to use VBA to combine specific sheets. I have a workbook containing about 15 sheets but want to combine 6 specific sheets. All the sheets have the exact same headers and number of columns but the number of rows are different.
I found this VBA code that works but it combines ALL of the sheets in the workbook. How to modify this to combine specific sheets. How to combine all visible sheets if that's possible.
Here is the code I found...
Sub CopyFromWorksheets() Dim wrk As Workbook 'Workbook object - Always good to work with object variables Dim sht As Worksheet 'Object for handling worksheets in loop Dim trg As Worksheet 'Master Worksheet Dim rng As Range 'Range object
I want to take Book 1 & Book 2 then combine them into one new book (Book 1 & 2 combined) only if data matches. So in the this example if columns A,B,C,D match Columns H,I,J,K then append the matching row from Book2 to the end of the matching row in Book1 and then save in Book 1 & 2 combined. So if I opened Book 1 & 2 combined and then started a macro that did it automatically. i have tried several times but got know where.
I am tracking total man hours of contractors in columns of different rates applicable. At present I have structured my worksheet with the different rates across and days going down. As I am invoiced for a period of work I will log the invoice ref number in a separate field. I would like to sum totals to report against $ Invoiced and $ Committed (i,e worked but not actually invoiced against yet).
Here is an example of what I am trying to achieve. The Actual showing sum mhrs * rate only for the mhrs entries with an invoice in corresponding Invoice Ref Column. The Committed producing sum of all mhrs * rate [which I am using =(SUM(D9:D37)*D7)] regardless of what is in invoice ref column.
This way I can hopefully track what we have been billed and also what we can expect to have to budget for to cover what has been worked but not billed against.
I am trying to solve a small problem that i have, I am not that good with VBA and need somehelp. heres the situation. Sheet 1 is filled in col.1= title, col.2= table# (ex. 1,2,...11)col3.= grid location (ex. a-1, a-2...a-10,b-1...b-10....d-10). I will enter a title then pick a table then a grid location. On sheet 2 also known as table 1. col.1 =grid location (ex. a-1, a-2...a-10,b-1...b-10....d-10) col. 2 = title.
I want to create a macro or function that can evaluate sheet1 and pick out when col.2=table 1 and col.3 = grid loc. A-1.... through D-10 then give me what is in col.1. this will have to be done for 11 sheets 1 sheet for each table.
I have a spreadsheet that holds salary information. At the moment it shows against each person the highest salary for a person of the opposite ***. What I would like to do is have another cell that shows the names of all people who have that salary.
E.g. if the highest comparable salary for someone of the opposite *** is 30000 then I would want a list of all the people with that salary.
Is it possible to do a look up that would show all the results that match certain criteria?
I have a conditional format that does not seem to be working for me. Cell B2 has a drop down optionSelect, No, Yes); Cell B3 is supposed to be conditionally formatted to return the following results if the criteria is met:
If B2 is equal to No or Yes then colour should become Yellow If B3 is >0 then colour should become Blue
The problem is when B3 is greater than 0 it does not change the cell colour to Blue.
B3 Conditional Format #1 is =AND(ISTEXT(B2),B2<>"Select") turn background to yellow B3 Conditional Format #2 is =AND(ISNUMBER(B3),B3<>0) turn background to blue
See attached for spreadsheet with conditional formats
I have a spreadsheet schedule that pulls quantities from another spreadsheet's cells. if the part number of the reference row matches the schedule cell's part number (row), and the date of the reference cell row is 2 workdays after that of the schedule cell's column, the quantity is put in the right place in the schedule. that part works. the problem I have is that sometimes there is more than one quantity with the same part number and date (due to the parts belonging to different jobs). when this is the case, only one of the quantities is picked up by the schedule. i want the schedule cells to sum the quantities of the reference file with matching criteria. i also don't want to have to change the reference file at all in order to do this. below is the function that works (besides summing the duplicates). the part after the " " is what i would need to alter.
HXS is the reference file where D is the part number column, I is the date column, and 5 is the index column referencing the quantity.
C is the part number column in the schedule K is the date row in the schedule ....
I have been reading through trying to find a similar post but the nearest i could find was one dealing with numbers rather than text. This is how the workbook looks. Column A contains a list of numbers based on vehicle types. Column B contains a list of vehicle names.
A B 1 Car, 1 Taxi, 2 Bus, 2 Lorry, 3 Skateboard, 3 Bike, 1 Motorcycle,
What I am looking for is the best way to combine the text from column B depending on the value of column a. the finished results would then end up as: "Car,Taxi,Motorcycle,", or "Bus,Lorry," etc. This is just a simple list.. The one I am working with has around 2500 entries. I have been trying to do this using the CONCATENATE function and IF statement but it's just not working..... My head is ready to explode
