I have got a combox which get the values from a excel sheet through this code:
Private Sub UserForm_Initialize() Dim LastRowColA As Long LastRowColA = Range("C65536").End(xlUp).Row With ComboBox1 For Row = 2 To LastRowColA 'Each cell in the range .AddItem Sheets("Sheet1").Cells(Row, 3) Next Row End With End Sub
How can I sort the values (they are numeric values) in my combobox?
I am currently using the following to populate the choices in my ComboBox:
For Each rngX In Range("Watchlist_Source_Menu").Cells If Len(rngX.Value) > 0 Then ComboBox2.AddItem rngX.Value End If Next
The range "Watchlist_Source_Menu" is p4:p104. It works fin but if there are duplicates in that range it duplicates the choices in the ComboBox. Is there a way that I can only show unique choices and show them alphabetized in the combo box upon intializing the userform?
The code for sorting a multi-column listbox in Retain Selection After Sorting ListBox was really good, and I've used it a lot in an application I'm building.
What I'm hoping to do is reload a listbox in such a way that the items appear in the same order they were previously in. I'll describe two scenarios: 1. User edits a record - user sorts listbox - user selects a record - user edits record - listbox reloads, unsorted
2. User adds a record - user sorts a listbox and sees a record is missing - user adds the missing record - listbox reloads, unsorted
ideally the last step for each would be "listbox reloads, sorted" and the user would go on down the list. the tricky part i think is when rows are deleted or added.
i'm starting on a solution, but if there's some existing code that will do this i'd appreciate if someone could point me to it (because, for example, the listbox sorting code i referred to above anticipated things i did not).
I havet he following code which sorts data. If there is no data to sort I keep on getting a run time error. Could I add something to my code to prevent the run-time error, as sometime there won't be any data to sort. The code runs when I switch to the worksheet in question.
Sub SortMeetings() Dim iCTR As Integer Dim yCTR As Integer Dim zCTR As Integer
zCTR = 11 For iCTR = 12 To 23 For yCTR = 1 To 10 If Len(Range("D" & iCTR).Offset(0, yCTR)) 0 Then Range("AA" & zCTR).Value = Format(Range("D" & iCTR).Offset(0, yCTR), "HH:MM") & " " & Range("D" & iCTR).Value zCTR = zCTR + 1 End If Next yCTR Next iCTR Range("AA11:AA" & zCTR).Select Selection.Sort Key1:=Range("AA11"), Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal End Sub
I am trying to get a combo box to work, but keep encountering the error "Invalid Property Value."
When the combobox entry is deleted and the user moves to the next text box in the userform, this error pops up which is very annoying. It also pops up when the word entered doesn't match, like it is supposed to.
I have MatchRequired set to True, because I want an error message to come up, but with my own error message like " That name doesn't exist, please try again ".
I can't figure out a way to ignore the "Invalid Property Value." error message, and show my own customized message.
I have a userform called "Description_Form". I had a listbox on this which worked 100%. I then decided to replace the listbox with a combobox. I replaced the word listbox1 with combobox1 in teh code below and now I am getting an error message:
Run-time error '-2147352573 (800200003)':
Could not fine the specified object.
I have checked the name of the Combobox and it is definitely combobox1.
Sub PopulateListWithHorizontalRange(New_Dest As Variant) Dim x As Range Description_Form.ComboBox1.Clear For Each x In Range("S_DESTINATIONS").Cells 'here is where I get the error message Description_Form.ComboBox1.AddItem x.Value
The following code works fine, but when I put the code in an ActiveX Combobox Change Event it gives a run-time error 1004. ("Select Method of Range class failed")The error occurs on the following line
Code: Worksheets("SAVED").Range("A" & l).Select
Code: Dim l As Long Application.ScreenUpdating = False l = Application.WorksheetFunction.Match(Worksheets("DATA").Range("O34"), Worksheets("SAVED").Range("A1:A10000"), 0) Worksheets("SAVED").Activate 'ROSTER=== Worksheets("SAVED").Range("A" & l).Select Selection.Resize(1, 739).Offset(1, 2).Copy
Using Excel 2010. I have a ComboBox (Not ActiveX) on a worksheet
I'm trying to add an event so that when user click on a choice a macro is fired using the selected item as citeria for a filter When I click on the drop down and make a selection I receive this error msg:
Cannot find the macro "cboUserSelection_Change" The macro may not be available in this workbook or all macros may be disabled
I also tried _AfterUpdate - similar error message.
I added the Combo Box code to the Worksheet code, not a standard module
I was able to run a quick test macro so I do not believe "all macros are disabled"
I'm trying to create a userform with a combobox wherein items that will be provided in it will be based on the worksheet named NA. When i try to change the Rowsource on the properties of the combobox i'm getting an error "could not set the rowsource property. Invalid property value". Do I need to declare the name of the worksheet before changing the rowsource?
Is it possible to sort a worksheet and either ignore #N/A error or have it drop to bottom of sort. I'm sorting a table by the highest value in a column bit all of the rows with the #N/A error are shown before the rows I want to see.
I am using VBA code to sort column N in decending order. However this code creates a worksheet 65535 rows long with credit values showing in the last few row....
I have a macro that should be sorting the last column of data, but it gives me an error code of "400". No explanation of the error, just the number. I have a feeling it is because I have formulas in place to pull the data from other sources, and the associated "#Value!" error is whited out by using the conditional formatting. Is there a way to have this macro only look at numeric values?
--------BEGIN VBA-------- Sub SortLastColumn() Dim myRange As Range, myCol As Integer, sortCol As String
This code works fine in excel 2003 in excel 97 it gives error. Run-time error '1004' Application-defined or object defined error.
Sub Extract_review() With Sheets("Review") . Range("C2") = InputBox("Scan ID Card") .Range("A2") = ">=" & Date - 1 .Range("B2") = "<=" & Date
End With Sheets("Punches").Range("A:H"). AdvancedFilter Action:=xlFilterCopy, _ CriteriaRange:=Sheets("Review").Range("A1:H2"), CopyToRange:=Sheets("Review").Range("A5:H5"), Unique:=False..................
I used the vba recorder to get the code and didn't change one thing, and now I am getting an error when i click on the command button to execute the code.
error
Run time error 1004 The sort reference is not valid. Make sure that it's within the data you want to sort, and the first Sort By Box isn't the same or blank.
Row 1 = column headings
row 2 is the first set of data, *****, however, most of the data in the column is blank. There are only 2 options, (Yes) or blank, and I am trying to sort the sheet so all the (Yes) appear at the top
I have created a macro which sorts 4 columns of data in asceding order numerically. I have assigned this macro to a button so that when the button is clicked, the columns of data are sorted.
Unfortunately when the button is pressed i get a vba run-time error 1004. I havent a clue how to resolve this. I recorded the macro useing the excel recorder function as opposed to typing it out manually.
The code created is given below. If i click debug when the error pops up, the code referring to column f:f is highlighted yellow.
I encounter a runtime error '1004' if the "Invoices" sheet is not selected when I run this procedure. The last line of the code is one which is highlighted when I debug.
Sub ProcessData() Dim aiOldRows() As Integer, aiNewRows() As Integer ' Arrays of new/old rows Dim rngRaw As Range 'Data entry area Dim rngInvoices As Range 'Invoices range Dim rngOpenPoint As Range 'Top-left corner of data entry area Set rngOpenPoint = ThisWorkbook.Worksheets("Data Entry").Range("a3") Set rngRaw = Range(rngOpenPoint, rngOpenPoint.End(xlDown).End(xlToRight)) FindNew aiOldRows, aiNewRows, rngRaw InvoiceSequence aiOldRows, rngRaw Set rngInvoices = Range(ThisWorkbook.Worksheets("Invoices").Range("A2"), _ ThisWorkbook.Worksheets("Invoices").Range("A3").End(xlDown).End(xlToRight)) rngInvoices.Sort Key1:=Range("M2"), Order1:=xlAscending End Sub
You'll notice that there are two other procedures (FindNew & InvoiceSequence) being called by this procedure. I don't think those have anything to do with the error, but I can provide the code for those if needed. Oh, and one other secondary question. To declare the ranges rngRaw & rngInvoices I pick the top-left cell of the data and then do:.....................
I'm trying to introduce some VBA code to an existing workbook that will automatically sort column A alphabetically on Sheet 2 (Summary) (excluding rows 1 & 2 as they contain headings) whenever the workbook is opened.
At the moment this code doesn't automatically run and when I run it manually I get a run-time error '91' the first time I try and when I run it for a second time (again manually) it works.
The code I've got at the moment is:
VB: 'The following code will run the sorting subroutine when the workbook is opened: Private Sub Workbook_Open() Call SortByWave End Sub 'And this subroutine will enable the autofilter functionality, clear all existing filters and then filter the data on column A: Sub SortByWave()
This piece of code runs perfectly on its own but when called at the end of another code it fails and I haven't a clue why. The reference wsTmp is dim'd globally and defined in the main component where it is simply - worksheets("somename")
Run-time error '1004':
The sort reference is not valid. Make sure that it's within the data you want to sort, and the first Sort By box isn't the same or blank.
i added a "Microsoft office spreadsheet 11.0 " object using additional control and used it in my form of Excel Macro. then i added some data from the combo box to the embedded excel object dispalyed. the form displays correctly and am even able to add data to cells.
but am not able to sort a column. gives me the error message "Sort method of range class failed" have tried to make sure the sheet is active using the ".Activate" with the object name. this is the only solution available on the existing forums.
I have a form with several combo boxes, and they function just the way I like as far as being able to pick from the list, or typing in them and having it show you the next available item in the list as you add letters. Whats happening that I would like to know how to deal with is... as soon as you type a letter that is not in my lookup range it generates an error. "Could not get the list property - Invalid property array index". I don't want people to be able to add to the list, but I would like a msgbox to pop up. Then allow them to go back to the box and try again.
Am trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B A 1 A 2 A 3 A 4 A 5 B 100 B 101 B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5. If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
When I make a comboBox selection from the dropdown menu, the menu stays down until the last statement of the comboBox code is finished. How do I make the dropdown disappear immediately after the selection is made?