I have a macro that should be sorting the last column of data, but it gives me an error code of "400". No explanation of the error, just the number.
I have a feeling it is because I have formulas in place to pull the data from other sources, and the associated "#Value!" error is whited out by using the conditional formatting.
Is there a way to have this macro only look at numeric values?
--------BEGIN VBA--------
Sub SortLastColumn()
Dim myRange As Range, myCol As Integer, sortCol As String
I have created a macro which sorts 4 columns of data in asceding order numerically. I have assigned this macro to a button so that when the button is clicked, the columns of data are sorted.
Unfortunately when the button is pressed i get a vba run-time error 1004. I havent a clue how to resolve this. I recorded the macro useing the excel recorder function as opposed to typing it out manually.
The code created is given below. If i click debug when the error pops up, the code referring to column f:f is highlighted yellow.
I am trying to sort a bunch of data by a custom list from left to right and after running the macro successfully excel crashes upon saving. I have tried this on different computers, resaved, started from scratch and it always crashes so there must be something with the macro that is causing this.
here is my macro:
Edit: It seems that the last line of code is causing my problem. I have started from scratch and gone though all the code one at a time and saved after each run. everything is fine until the "Application.DeleteCustomList Application.CustomListCount" is run. after that excel crashes when saved.
I already have a Macro button built that hides values in column A. The next step I am trying to perform is a custom sort on column B in this order "Backordered", "Sourced", Shipped", and "Received". Here is my code that I have so far but where to begin adding in code to make this button sort.
I havet he following code which sorts data. If there is no data to sort I keep on getting a run time error. Could I add something to my code to prevent the run-time error, as sometime there won't be any data to sort. The code runs when I switch to the worksheet in question.
Sub SortMeetings() Dim iCTR As Integer Dim yCTR As Integer Dim zCTR As Integer
zCTR = 11 For iCTR = 12 To 23 For yCTR = 1 To 10 If Len(Range("D" & iCTR).Offset(0, yCTR)) 0 Then Range("AA" & zCTR).Value = Format(Range("D" & iCTR).Offset(0, yCTR), "HH:MM") & " " & Range("D" & iCTR).Value zCTR = zCTR + 1 End If Next yCTR Next iCTR Range("AA11:AA" & zCTR).Select Selection.Sort Key1:=Range("AA11"), Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal End Sub
I am basically using a combobox in word that opens an excel spreadsheet and pulls information about the people entered in the combobox. The information pulled from excel is then pasted into the original word document.
The problem that I am having is that the macro may be needed to run twice (ex. suppose the user forgot to include an individual in the first run) and on the second run the excel document cannot be opened and it gets stuck on the loop. The macro will only work again if the word document is closed and reopend. I suspect that the excel document is not completly closing on the first runthrough.
I've included my code below. The initialize combobox code is on the bottom. I
PHP Code:
Dim WordApp As Word.ApplicationDim xlApp As Excel.Application 'Dim xlWB As Excel.WorkbookPrivate Sub CommandButton1_Click()Bios = ActiveWorkbook.NameNewWBookName = ActiveWindow.CaptionSet WrdDoc = ActiveDocumentlastrow = Range("A1").End(xlDown).RowS
(Excel 2007), I have a template that I need duplicated for every reference. My Worksheet lists all the references and the macro use to duplicate a worksheet for every reference in the worksheet. The problem is when duplicating now, it duplicates the name of the template. For example, when the macro is ran sheet1= Template(1), sheet2= Template(2) ect.
Here's the code- I think it has something to do with the named ranges
Code: Sub Macro1() For i = 1 To Application.WorksheetFunction.CountA(Worksheets("Worksheet").Range("A:A")) Sheets("Template").Select Sheets("Template").Copy After:=Sheets(Sheets.Count) Sheets(Sheets.Count).Name = Worksheets("Worksheet").Cells(i, 1).Text Next i End Sub
I have a VBA macro for automatically create a word report using data in Access and Excel. The macro is hosted within a Excel document but are using both Word-, Excel and Access objects/dataTtemplates for the creation.
The errors appears what it seems randomly. The macro iterates the same code a few times even in Office 365 but then it crashes. The most common error messages are:
Error 1:
Run-time error '-2147417851 (80010105)':
Automation error : The server threw an exception.
Error 2:
Run-time error '462':
The remote server machine does not exist or is unavailable
Error 3:
This action cannot be completed because the application () is busy. Choose Switch To to activate and correct the problem.
(no options are working, this hang the application)
If I debug usually the error originates from the code where I ether close the workbook template I'm using:
excelWorkbook.Close False
... or when I paste a chart from Excel to the Word report:
wordDocument.ActiveWindow.Selection.PasteSpecial
Even more strange are that sometimes if I continue to run the macro its all working again. This ONLY happens when the client office installation is O365. Office 2013 works just fine. I thought O365 and Office 2013 was fairly equal?
I am looking for a macro to sort my colums in ascending order the range i need sorted is from A7:F107, it will be sorted with the numbers in the A column ie 1 - 107. sometimes different numbers get added and it has to be sorted in number sequence.
If possible i would also like a macro to protect this range after the sort,
I have obtained a piece of code from online that runs a macro on multiple files in a single given a single folder. when i implement it though it throws a run time error 424 "object required' and point to 'Documents.Open FileName:=path & file' line of code. Is this because Dim file type is not declared?how do i fix this problem. also, im using excel 2010.A
I keep getting an automation error in excel 2010 when I click on the button that executes the macro. Excel crashes when the box appears. There is no code in the error box. Why I get this error message.
I have been given a macro recorded on a mac and it works fine with Mac Excel 2011. Unfortunately, I need to make it to work on a windows machine, but it comes up with an error message "macro unable to set width property of the window class. Run-time error 1004". When I press debug it takes me to the line .Width = 1456.
Below is the chunk of the code that becomes highlighted when pressing debug.
With ActiveWindow .Width = 1456 .Height = 795 End With
Is it possible to sort a worksheet and either ignore #N/A error or have it drop to bottom of sort. I'm sorting a table by the highest value in a column bit all of the rows with the #N/A error are shown before the rows I want to see.
I am using VBA code to sort column N in decending order. However this code creates a worksheet 65535 rows long with credit values showing in the last few row....
This code works fine in excel 2003 in excel 97 it gives error. Run-time error '1004' Application-defined or object defined error.
Sub Extract_review() With Sheets("Review") . Range("C2") = InputBox("Scan ID Card") .Range("A2") = ">=" & Date - 1 .Range("B2") = "<=" & Date
End With Sheets("Punches").Range("A:H"). AdvancedFilter Action:=xlFilterCopy, _ CriteriaRange:=Sheets("Review").Range("A1:H2"), CopyToRange:=Sheets("Review").Range("A5:H5"), Unique:=False..................
I've been using a macro successfully for the last couple of years, but this morning when I went to use it, it decided to fail. I have a workbook which contains various spreadsheets. The macro that has failed performs the following tasks:
1. It copies a list of email addresss from an external workbook to a sheet in the current workbook (still works) 2. It copies the referral sheet I want to send to a new file, and saves it with an appropriate filename to an appropriate folder (still works) 3. The macro then creates an email with a standard subject line, attaches the new worksheet and emails it to each of the addresses as above (broken)
The error message is from Microsoft Visual Basic. "Run-time error '1004': Mail system failure. Check your mail installation."
I'm guessing there is a setting somewhere in Excel that has changed as part of an update.
I've been through a number of the options in the developer menu to remove any obvious restrictions (& reopened excel afterwards), but so far it hasn't resolved the problem.
For what it's worth, here is the macro code.
With Application .EnableEvents = False .ScreenUpdating = False End With Run "PullInSheet1" Dim oldbook As String
[Code] .......
In case you're wondering about the pullinsheet code, I'll add it below - but I probably grabbed it from this forum a couple of years ago (like some of the above) & just made some changes.
Code: Sub PullInSheet1() Dim AreaAddress As String '''''' Sheet11.UsedRange.Clear Dim ClRange As String ClRange = "= 'L:ADMINEMPLOY SERVICES" _
[Code] ........
There are a couple of things I've wanted to do to improve the macro, but I couldn't justify the need to spend time working it out (since writing spreadsheets isn't really my job). Since it's broken at the moment, I can...
1. I'd like to create a subject line that reflects the name of the person being referred. For some reason though, anything other than text in the cell reference caused an error for me. eg, I tried using concatenate to create my subject line, but it didn't work.
2. I'd like the copied sheet to contain all of the formatting of the original sheet. Presumably there is a paste option that will do this and I just picked the wrong one.
The mailsystem we use is Groupwise 8. I couldn't find any settings in that program that have been changed, or that I could change.
I should change the extension from xls to xlsx in the code since I'm using Excel 2010 (but changing it doesn't fix the problem).
I used the vba recorder to get the code and didn't change one thing, and now I am getting an error when i click on the command button to execute the code.
error
Run time error 1004 The sort reference is not valid. Make sure that it's within the data you want to sort, and the first Sort By Box isn't the same or blank.
Row 1 = column headings
row 2 is the first set of data, *****, however, most of the data in the column is blank. There are only 2 options, (Yes) or blank, and I am trying to sort the sheet so all the (Yes) appear at the top
I encounter a runtime error '1004' if the "Invoices" sheet is not selected when I run this procedure. The last line of the code is one which is highlighted when I debug.
Sub ProcessData() Dim aiOldRows() As Integer, aiNewRows() As Integer ' Arrays of new/old rows Dim rngRaw As Range 'Data entry area Dim rngInvoices As Range 'Invoices range Dim rngOpenPoint As Range 'Top-left corner of data entry area Set rngOpenPoint = ThisWorkbook.Worksheets("Data Entry").Range("a3") Set rngRaw = Range(rngOpenPoint, rngOpenPoint.End(xlDown).End(xlToRight)) FindNew aiOldRows, aiNewRows, rngRaw InvoiceSequence aiOldRows, rngRaw Set rngInvoices = Range(ThisWorkbook.Worksheets("Invoices").Range("A2"), _ ThisWorkbook.Worksheets("Invoices").Range("A3").End(xlDown).End(xlToRight)) rngInvoices.Sort Key1:=Range("M2"), Order1:=xlAscending End Sub
You'll notice that there are two other procedures (FindNew & InvoiceSequence) being called by this procedure. I don't think those have anything to do with the error, but I can provide the code for those if needed. Oh, and one other secondary question. To declare the ranges rngRaw & rngInvoices I pick the top-left cell of the data and then do:.....................
I'm trying to introduce some VBA code to an existing workbook that will automatically sort column A alphabetically on Sheet 2 (Summary) (excluding rows 1 & 2 as they contain headings) whenever the workbook is opened.
At the moment this code doesn't automatically run and when I run it manually I get a run-time error '91' the first time I try and when I run it for a second time (again manually) it works.
The code I've got at the moment is:
VB: 'The following code will run the sorting subroutine when the workbook is opened: Private Sub Workbook_Open() Call SortByWave End Sub 'And this subroutine will enable the autofilter functionality, clear all existing filters and then filter the data on column A: Sub SortByWave()
This piece of code runs perfectly on its own but when called at the end of another code it fails and I haven't a clue why. The reference wsTmp is dim'd globally and defined in the main component where it is simply - worksheets("somename")
Run-time error '1004':
The sort reference is not valid. Make sure that it's within the data you want to sort, and the first Sort By box isn't the same or blank.
i added a "Microsoft office spreadsheet 11.0 " object using additional control and used it in my form of Excel Macro. then i added some data from the combo box to the embedded excel object dispalyed. the form displays correctly and am even able to add data to cells.
but am not able to sort a column. gives me the error message "Sort method of range class failed" have tried to make sure the sheet is active using the ".Activate" with the object name. this is the only solution available on the existing forums.
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR: NAMED ARGUMENT NOT FOUND
Sub HPVAL() Dim r As Range, myStr As String myStr = "HP" Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _ :=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _ False, SearchFormat:=False) If Not r Is Nothing Then r = r.Value While Not r Is Nothing Set r = Cells.FindNext(r) If Not r Is Nothing Then r = r.Value End If Wend End If End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
