Add Dynamic Named Range To Combobox In Userform - Runtime Error

Oct 8, 2013

I'm trying to add a dynamic named range to a combo box in Userform but getting this error.

Have tried several lines of code this being the last that hasn't worked . . . .

Code:
CustCBx.RowSource = Range("CustList").Value

This is the formula for the named range in sheet

Code:
='Customer Info'!$J$2:INDEX('Customer Info'!$J2:$J200,COUNTA('Customer Info'!$J2:$J200))

View 1 Replies


ADVERTISEMENT

Excel 2007 :: Populate Userform Combobox With Named Dynamic List

Aug 21, 2014

Excel 2007 and very new to VBA...

I have a userform (named "QAReviewForm") with a combobox (named "cboSupName"). I want it to populate with my named range "SupList".

FYI, the SupList is found on sheet 2, "Administrative Menu" in column E. E1 contains the heading "Supervisors", and my named range formula is

Formula:

[Code ] .....

When it runs, my form opens and the combobox is there, but nothing appears as options for me to select (yes, I have some values in column E).

View 11 Replies View Related

Combobox Addition To Rowsource In Dynamic Named Range Corrupting Table

Aug 10, 2014

My Userform with combobox entries for product checks against the rowsource and if not on the list, is added to the list. the list is a named range in a Table that is used in a data model.

No matter which way I try I am regularly getting a corruption in the table that is home to the named range which is the rowsource... after one or two entries from the userform.

The rowsource is not bound to the worksheet, it is populated at userform_initialize procedure. (There are 4 combobox drawing from same rouwsource hence the loop through to check each)

debug points to the line at which conbobox value is being entered into the rowsource, though not always - it sometimes just crashes the whole file and everything needs restarting, upon which the table is fine and entry is evident.

I have tried resize, addrow to bottom of table variations and all result in the same core problem of a table corruption that crashes the file.

View 4 Replies View Related

Dynamic Named Range With Userform?

Oct 20, 2011

I have dynamic named range that lists by columns. I can use this with data validation pull down on my worksheet and all is fine. But when I use this named range in the RowSource of a combo box in a userform, I only get the first column of data, or basically, the data in B1, but not C1, D1, ect. Here is the formula for the named range.

=OFFSET(INFO!$B$1,0,0,1,COUNTA(INFO!$1:$1)-1)

View 2 Replies View Related

Dynamic Range In UserForm Listbox/ComboBox

May 21, 2008

How can I fill a UserForm ComboBox or ListBox with cells from a dynamic changing range?

View 3 Replies View Related

Userform On Top Of Another -> Runtime Error 402

Oct 20, 2011

I have an application using two userforms. Following sequence is used:

1. Open Userform1 (with uf.show)
2. click on a commandbutton in userform1 opens a second userform on top of userform1.
3. Close userform2 with commandbutton on userform2 (userform2.hide)
(I did not want the user to close the UF via the "X" )

Runtime error 402 : Must close or hide topmost modal form first

So, I changed my code so when the user clicks the commandbutton in userform2

userform1.hide (which is the topmost)
userform2.hide

But again I get the same error.

View 7 Replies View Related

Runtime Error 424 When Trying To Show Userform

Jul 25, 2014

Ive created a userform that I want to have input data into specific cells in my worksheet. I have the userform created, and some of the other VB stuff written, but it is far from being functional. I have come across the first of what to is to be many problems (Im pretty rusty at VB).

I have a button on my spreadsheet that is supposed to show the userform using this macro

[Code] .....

When I click the button, it breaks at "Form1.Show" giving me "Run-time error 424 : Object Required".

View 7 Replies View Related

Runtime Error Command In Userform

Feb 17, 2012

I am experiencing a run time error with my command in a UserForm.

Run time error '9':
Subscript out of range.

Error occurs on the following row:
With Worksheets("Math Lineup").Range("D3")

Below is the code I am using:

PHP Code:

Private Sub CmdAddWrestler_Click()Dim RowCount As LongIf Me.txtWrestler.Value 
= "" ThenMsgBox "Please enter a name", vbExclamation, "Wrestler Name"Me.txtWrestler.SetFocusEnd IfRange ("D4") 
= txtWrestler.TextRowCount 
= Worksheets("Match Lineup").Range("D3").CurrentRegion.Rows.CountWith Worksheets("Math Lineup").Range("D3")    
.Offset(RowCount, 0) = Me.txtWrestler.Value End With txtWrestler = "" End Sub 

View 2 Replies View Related

Vlookup And Dynamic Named Ranges = #ref Error

Apr 3, 2008

I am trying to merge data from two worksheets onto a 3rd for a mail merge. The COLLECTIONS sheet contains the acct #, name and amount owed. The ADDRESSES sheet contains the acct #, name and all of the address information. The 3rd sheet is the MERGE sheet that I'm using as the reference point for my word document and the mail merge. Upon reflection the MERGE sheet is probably not necessary, but made sense to have it when I started out.

Never the less...
On the ADDRESSES sheet I am trying to name a dynamic range "AddressList" (I'm trying to go dynamic because the list of addresses will change from month to month). I am using the following formula in the refers to field when I name the range:

=Offset(Addresses!$A$5,0,0,CountA(Addresses!$A:$A),CountA(Addresses!$1:$1))

I think this is what is giving me my problem, because the named range does not show up in the list when I try to go to the named range.

Just in case that is not the problem, the #Ref is showing up when on the MERGE sheet I type a vlookup formula referencing the acct # on the ADDRESSES sheet. That formula looks like this:

=VLOOKUP(A4,AddressList,3,0)

which seems simple enough. Before trying to make the named range dynamic the formula worked fine, which is why I'm thinking the named range is what's giving me the problems.

View 9 Replies View Related

Combobox With Named Range

May 23, 2007

'i use a combobox in a userform to show data from a hidden sheet its name is sheet5(sheet1).
'i defined the Range as ExpCat and put ==OFFSET(Sheet1!$M$3,0,0, COUNTA(Sheet1!$M3:$M9),1)
'and use this code to view the data, but the code shows the data of the activesheet.

Private Sub ComboBox1_Click()
Me.ComboBox1 = ThisWorkbook.Worksheets(5).Range("ExpCat").Value
'Me.ComboBox1 = ThisWorkbook.Sheet5.Range("ExpCat").Value

End Sub

View 9 Replies View Related

Runtime Error 9 - Subscript Out Of Range

Feb 12, 2014

I am trying to consolidate data in Sheet7 of all the files in a folder to a single file. In case a file doesn't contain Sheet7, i want to get the name of the workbook. The code is working fine, but after it loops it is returning Runtime Error 9 - Subscript out of range.

[Code] .....

View 5 Replies View Related

VBA Runtime Error 9 Subscript Out Of Range

Feb 21, 2012

The internet normally has the answers but I have not found one for this runtime error. I am just trying to paste some values from Excel into a word table using the following code

Code:
'Paste the values into the word table
Worksheets("Schedule").Activate
Set MyTable = Union(Range("a120:a124"), Range("a149:a152"), Range("a177:a181"), Range("a206:a213"), Range("a239:a240"), _

[Code]....

View 4 Replies View Related

Runtime Error 9, Subscript Out Of Range

Apr 16, 2006

I used the macro recording thing to record a code to do OLS regression, added a few things and put it in a bigger program, but it's not working. It gives me a "Subscript out of range" message.

Here's the code I added: ...

View 9 Replies View Related

Runtime Error '9' Subscript Out Of Range

Mar 13, 2007

I see a few people have had this problem but I still cant work out what is going on in my code....

View 6 Replies View Related

Dynamic Named Range Sort Including Cells Outside Defined Range

Apr 3, 2008

Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:

=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)

When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....

View 9 Replies View Related

Connecting Named Range With ComboBox?

Jun 16, 2014

I want to make simple Combobox with two dropdown lists throwing me back cells values, but I never made that so I've got a little difficulties.

The sample combobox should look like this:

Clipboard01.png

For the left Dropdown list there's defined name of the range "ITEM1", and for the second - range named "ITEM2".

After user will choose something I want to have numbers of the items selected from the lists in cells "A1" and "A2", and run a macro after clicking OK. How can I do this?

View 1 Replies View Related

Populate ComboBox With Named Range

Jan 9, 2007

I use

Set rnData = ActiveSheet. Range("ProductList")
vaData = rnData.Value

With Me.model
.Clear
.List = vaData
.ListIndex = -1
End With

to populate a combobox list. 'ProductList' is a Dynamic Named Range with the definition

=OFFSET(Stock_List!$L$2,0,0, COUNTA(Stock_List!$L:$L)-1,1)

The '-1' allows for a heading at the top of the column.
This works fine when the list in col. L has more than one entry under the heading. But with only one entry I get 'Runtime error 381 - Could not set the List property, Invalid property array index' and the debug highlights on

.list=vaData

View 9 Replies View Related

Creating Named Range Taking Avg To Date Of Dynamic Range

Jul 15, 2014

I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.

View 1 Replies View Related

Copy Range From One Workbook To Another - RunTime Error 438

Feb 16, 2014

VBA code below. My aim is to be able to copy a range from one workbook to another and I get the Run Time Error 438 on the line colored red.

Can this code be corrected or is there an easier way to get this done?

[Code] .....

View 8 Replies View Related

Syntax Range - Getting Runtime Error 1004

Feb 15, 2013

I know you can use the syntax range(cells(x,y),cells(z,w)) but for some reason unknown to be the following isn't working:

Set CurrSuppRange = TT.Range(Cells(1, CurrSuppCol), Cells(LastRow, CurrSuppCol))
where
CurrSuppCol = cboxCurrSupp.ListIndex
OurSuppCol = cboxOurSupp.ListIndex
LastRow = Workbooks(lbWkBkName.Caption).Worksheets(cboxWorksheet.Value).Cells(Rows.Count, "A").End(xlUp).Row
(each return integer values)
Set TT = Workbooks(lbWkBkName.Caption).Worksheets(cboxWorksheet.Value)

(tested and works fine)

View 2 Replies View Related

Dynamic Named Range ..

Dec 30, 2008

I need to create a dynamic named range called "DIVLOC," that corresponds to a sheet called Divloc_List in the workbook. Then, I need to take this range and perform a vlookup against it. I tried to create the range in the sheet itself (it wasn't dynamic), and then used that in the vlookup in the vba code, but I got error 2402 (I think). I'm not sure how to define the dynamic range in vba code, and then use the range in the vlookup.

View 9 Replies View Related

Dynamic Named Range Somehow Changes

Jan 4, 2009

what would cause the formula for a dynamic named range to keep changing on its own? I enter the following formula:

OFFSET('Raw Data'!$D$2,0,0,COUNTA('Raw Data'!D:D),1)

Which I save and somehow gets changed to the following formula:

OFFSET('Raw Data'!$D$2,0,0,COUNTA('Raw Data'!XFD:XFD),1)

This is happening to several named ranges I created. I’ve tried to correct this by editing the formula which seems to work but changes again. I’ve also deleted the named range and recreated it with the same change process taking place.

In case it matters the named ranges are being created on a table imported into Excel via MS Query.

View 9 Replies View Related

Dynamic Named Range

Nov 6, 2009

I am trying to create a dynamic named range to select a list of text entries from a number of different columns that I am using for Data Validation. The columns have entries of variable length, none more than 30. What I am seeking to achieve is that having selected a heading in cell C3 the available list in DV dropdowns elsewhere are governed by the contents of C3.

I have created a defined name, StartPos that uses the contents of C3 to evaluate to the cell reference (e,g $H$4) of the topmost cell in the relevant column. However when I try to use it in the usual formula

=OFFSET($A$1,0,0,COUNTA($A:$A),1) formula I try

=OFFSET(StartPos,0,0,COUNTA(StartPos:[ ],1)

I get stuck at what to put in the brackets. Ideally I would like to use the COUNTA to go down to the last entry in the column. However, even when I try to give the range a height of 30 rows:
=OFFSET(StartPos,0,0,30,1) I still get an error.

View 9 Replies View Related

Convert Dynamic Range To Static Named Range

Sep 13, 2007

My searches have not produced anything that I could apply to this situation.

I'm trying to write VBA that would:

1. Search a Workbook for Dynamic Ranges.

2. When a Dynamic Range is found the code would:

A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"

3. Save Changes.

4. Close File.

My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.

View 9 Replies View Related

ComboBox Add Entry To Named Range If Not In List

Feb 4, 2014

I am trying to work up a referral tracker for my wife's employer. I have Named Ranges on sheet 2, a running log on sheet 1. I also have a userform that is being populated from the ranges on sheet 2. I have the project mostly functional, except for a feature I would like to add in. I am interested in adding to the named range that is being accessed if the entry is not in list, via the combobox1 on the userform. Also, if possible, I would like the list to re-sort behind the scenes so the added entry is properly located in A-Z format for next time. After searching the web a bit, I found some code that might work with some tinkering, but currently I am having issues with it. Here is the bit I am trying to use.

[Code] ....

I have been getting 424 Object Errors and a few others as I continue to mess with this. I am also attaching the project if someone may see a better way of getting the task accomplished. The overall scope of this is to log all referral sources so monthly and yearly reports could be made.

Attached File : Copy of Referal Tracker.xlsm‎

View 3 Replies View Related

Runtime Error 9: Subscript Out Of Range From Private Sub Worksheet_Calculate()

Apr 12, 2009

I have the following code which performs a different action depending on whether K1 says "true" or "false". K1 contains a formula which identifies whether or not E1 is already present on a list on another page. If K1 says "false," the code is supposed just reenter the formula that was previously in E1 (because I don't know how to tell it to do nothing). If K1 says "true," I want a popup box where answering yes reenters the previous formula and answering no pulls up an input box to enter other data. This code worked fine until I closed the workbook. When I tried to open it again, I got a runtime error 9: subscript out of range message and nothing happens when I change the value in A1 (upon which the formula in E1 is based).

Private Sub Worksheet_Calculate()
Application.EnableEvents = False
If Sheets("Mix Designs Input").Range("K1").Value = "true" Then
Range("E1").Select
Ans = MsgBox("Do you want to overwrite this mix design?", vbYesNo)
If Ans = vbNo Then Title = InputBox("Enter the name of the design you wish to input")
Range("E1") = Title
If Ans = vbYes Then ActiveCell.FormulaR1C1 = _
"=IF(ISBLANK(RC[-4]),"""",IF(ISERROR(VLOOKUP(""reclaim"",R[8]C[-4]:R[13]C[-

View 9 Replies View Related

Dynamic Range For Combobox?

Nov 21, 2013

i have a combobox(form control) that has its listfillrange property equal to a range("A1:a10") on sheet1. The combobox allows for user entry and i am trying to create code where it adds the value entered in the combobox to the range("a1:a10) on sheet1 if its not already within the list. Then set the last value used as the listindex of the combobox.

View 2 Replies View Related

Combobox Dynamic Name Range

Jul 20, 2007

how to control the contents of one combobox based on the selection made in another combobox. But, for some reason, ComboBoxTime1 (as shown in the code below) will only display the first item in the Dynamic Named Range when the user clicks on the pull-down arrow. The Named Range is consistent in size (4 cells) for each of the selection options in ComboBoxDay1. why only the first of four options are displayed in the second combobox?

Also, when a selection is made in the first combobox, the second combobox immediately displays the first item in the Dynamic Named Range (the one selection option it allows). I would prefer for it to remain blank until the user has selected an item from the pull-down list.

Private Sub ComboBoxDay1_Change()
Dim strRange As String
If ComboBoxDay1.ListIndex > -1 Then
strRange = ComboBoxDay1
strRange = Replace(strRange, " ", "_")
With ComboBoxTime1
.RowSource = vbNullString
.RowSource = strRange
.ListIndex = 0
End With
Else
LblTime1.Caption = "Time 1:"
End If
End Sub

View 3 Replies View Related

Dynamic Named Range With GETPIVOTDATA

Jun 18, 2013

I want to create a charts on a pivot table, but I don't like the way Pivot charts function and the limitations they have.
So I want to create a normal charts that is dynamic and based on a pivot table.

In order to do so, I want to create dynamic named ranged for the data in the pivot table to use for the data series for the chart.

I can reference the week numbers (headers in the pivot table) for one data series and get the data by this formula:

=OFFSET(Weekly!$C$15,0,0,1,COUNTA(Weekly!$14:$14)-1)
$C$15 is the first cell that holds the data for the series.
Row 14 holds the week numbers (headers in the pviot)

However, I want to make that formula even more dynamic by having it reflect the changes done to the pivot table who's cells it references to.

So how do I do this using the GETPIVOTDATA function? (or some other function that makes it dynamic and reflect changes done to the pivot table and accounts for the row numbers with the data can change)
If I generate the GETPIVOTDATA formula and try to substistute the fixed cell reference for $c$15 with it, the OFFSET formula for the dynamic range gives an error.

And how can I grab the column headers (week number) dynamically?

View 1 Replies View Related

Dynamic Named Range Changing?

Feb 25, 2014

I am doing an Advanced Filter, and I am using a named range in my VBA code that decides the Criteria range.

The dynamic named range is called 'Criteria' and this is the code:

VB:
=OFFSET(Sheet1!$A$2,0,0,Sheet1!$BZ$23,41)

However, when I run the VBA code, although it works perfectly, afterwards the named range has changed to:

VB:
=Sheet1!$A$2:$AO$3

I just want this to remain unchanged, as it works great. This is my VBA code:

VB:
'Filter and send data to new sheet
Sheets("Sheet2").Select
Cells.Select

[Code]....

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved