Is it possible to sort a worksheet and either ignore #N/A error or have it drop to bottom of sort. I'm sorting a table by the highest value in a column bit all of the rows with the #N/A error are shown before the rows I want to see.
So I highlighted bunch of cells where numbers are stored as text and chose "ignore error". But when I re-sort the list, the errors come right back again.
Is there a way to get them to stick so I don't have to keep choosing ignore error?
i m trying to add values in different sheets though some of the values have a #n/A in them and i want to ignore this = SUM(Set1!D9,Set3!D9,Set2!D9). However Set1!D9 is an error and I would like to ignore this value!!
View 2 Replies View RelatedI am running a macro which filters a column to show only records with "#N/A" (ie an error), and copies these to another worksheet. As I am aiming for no errors, there will be occasions when there is no filtered data.
My problem is that, unless I use something like xlCellTypeVisible, when there is no data shown it still copies and pastes all the hidden records. And if I do use it when no filtered data, I currently get an error "No cells were found".
I have tried many iterations of code correction and i think i'm currently blinded by staring at it so long!
My current if statement reads as follows:
[Code] .....
I think I might need to use some sort of On Error Resume Next statement, but I have never used these before. When I tried adding that before the If statement, it just ignored the criteria and tried copying hidden rows - the exact opposite of what I want.
I'd like something that said, if this condition = error, skip over entire if statement and carry on with rest of the sub.
I have the following two columns in A1:B4 (customer # followed by percentage)
1 0.5
2 0.9
3 0.8
4 #DIV/0!
In column D i have a list of the customer #s. In column E i try to identify if the customer in column D have a percentage >=.8.
I am using the below formula, but getting a #DIV/0! error due to the error in cell B4, which i am not allowed to change using an iferror formula.
=SUMPRODUCT(--(A1:A4=D2),--(B1:B4>=0.8))
Is there a way to get around this using sumproduct or any other method to determine if the customer in D has a percentage >= 80%?
I need to get a subtotal of a range (eg: A1:A30), however some cells in this range have #N/A errors due to particular formulas they contain. I could go into these cells and add a formula which 'catches' these errors, but there are far too many given my current time constraints.
Is there any way to use SUMIF to add the cells which do not contain errors and skip the ones that do? (ie: SUMIF($A$1:$A$30,""&"Error Parameter")).
Somehow I have managed to blag my way through most scripts
View 2 Replies View RelatedIn Column V there is the formula =IF(ISBLANK(A3),"",COUNTA(N3:U3)/8). This is formatted to percentage. The column shows various percentages, from 0% to 100%, some cells appear blank from the "" part of the formula.
This column is sorted using a macro via a button.
When the sort is ascending, the 0% are at the top and the cells with "" are at the bottom, but when the sort is descending, the "" are at the top.
Is there a way to always to have the "" cells at the bottom whether the sort is ascending or descending. Is this possible to achieve by the code in the sort macro or should it be done by adjusting the formula. Whatever way it is beyond my capabilities.
The code in the sort macro is...
Private Sub CommandButton11_Click()
'Percent Complete
Static iOrder As Integer
Dim oRange As Range
If iOrder = xlAscending Then
iOrder = xlDescending
Else
iOrder = xlAscending
End If
ActiveSheet.Unprotect Password:="duncan"
Set oRange = Range("A3:AZ2000")
oRange.Sort Key1:=Range("V2"), Order1:=iOrder, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
ActiveSheet.Protect DrawingObjects:=True, Contents:=True, Scenarios:=True _
, AllowSorting:=True
ActiveSheet.Protect Password:="duncan"
End Sub
I havet he following code which sorts data. If there is no data to sort I keep on getting a run time error. Could I add something to my code to prevent the run-time error, as sometime there won't be any data to sort. The code runs when I switch to the worksheet in question.
Sub SortMeetings()
Dim iCTR As Integer
Dim yCTR As Integer
Dim zCTR As Integer
zCTR = 11
For iCTR = 12 To 23
For yCTR = 1 To 10
If Len(Range("D" & iCTR).Offset(0, yCTR)) 0 Then
Range("AA" & zCTR).Value = Format(Range("D" & iCTR).Offset(0, yCTR), "HH:MM") & " " & Range("D" & iCTR).Value
zCTR = zCTR + 1
End If
Next yCTR
Next iCTR
Range("AA11:AA" & zCTR).Select
Selection.Sort Key1:=Range("AA11"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End Sub
I have a spreadsheet for which I have to set up a formula to get the minimum value from a range of cells, but that range can include blank cells, errors (#DIV/0) and zeros, all of which I want to be ignored. I can work out how to ignore EITHER the zeros
(=MIN(IF(C10:G100,C10:G10)),
or the error cells
(=MIN(IF(ISNUMBER(C9:G9),C9:G9)),
How to exclude both. If I try to combine both of these exclusion criteria it doesn't work and I end up with the answer #DIV/0, which is one of the values I want it to ignore.
I have in column D starting D9, I have numbers starting at 1, and may finish at 100. But there could be duplicates, 1,2,3,3,4,5,6,6,7,7,8,9,10,10,11,12,13,.........
I would like to only copy the range D9 to H (End of column D), ignoring all the duplicate numbers, to another sheet.
So on the second sheet, it would be 1,2,3,4,5,6...... with the data copied from E,F,G and H.
I am having list property error in below code alt this line
.List = c.Offset(0, -2) ,Ray = Application.Transpose(.List),
Code:
For Each c In r.Cells
If c = ComboBox1 Then
ComboBox2.AddItem c.Offset(0, -2)
With ComboBox2
.List = c.Offset(0, -2)
Ray = Application.Transpose(.List)
[Code] ......
I am using VBA code to sort column N in decending order. However this code creates a worksheet 65535 rows long with credit values showing in the last few row....
View 9 Replies View RelatedI have a macro that should be sorting the last column of data, but it gives me an error code of "400". No explanation of the error, just the number.
I have a feeling it is because I have formulas in place to pull the data from other sources, and the associated "#Value!" error is whited out by using the conditional formatting.
Is there a way to have this macro only look at numeric values?
--------BEGIN VBA--------
Sub SortLastColumn()
Dim myRange As Range, myCol As Integer, sortCol As String
Set myRange = ActiveCell.CurrentRegion
myCol = myRange.Columns.Count
sortCol = myRange.Item(1, myCol).Address
myRange.Select
Selection.Sort Key1:=Range(sortCol), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
IgnoreControlCharacters:=True, IgnoreDiacritics:=True
End Sub
This code works fine in excel 2003 in excel 97 it gives error. Run-time error '1004'
Application-defined or object defined error.
Sub Extract_review()
With Sheets("Review")
. Range("C2") = InputBox("Scan ID Card")
.Range("A2") = ">=" & Date - 1
.Range("B2") = "<=" & Date
End With
Sheets("Punches").Range("A:H"). AdvancedFilter Action:=xlFilterCopy, _
CriteriaRange:=Sheets("Review").Range("A1:H2"), CopyToRange:=Sheets("Review").Range("A5:H5"), Unique:=False..................
I used the vba recorder to get the code and didn't change one thing, and now I am getting an error when i click on the command button to execute the code.
error
Run time error 1004
The sort reference is not valid. Make sure that it's within the data you want to sort, and the first Sort By Box isn't the same or blank.
Row 1 = column headings
row 2 is the first set of data, *****, however, most of the data in the column is blank. There are only 2 options, (Yes) or blank, and I am trying to sort the sheet so all the (Yes) appear at the top
when i did the macro recorder, it seemed to work.
I have created a macro which sorts 4 columns of data in asceding order numerically. I have assigned this macro to a button so that when the button is clicked, the columns of data are sorted.
Unfortunately when the button is pressed i get a vba run-time error 1004. I havent a clue how to resolve this. I recorded the macro useing the excel recorder function as opposed to typing it out manually.
The code created is given below. If i click debug when the error pops up, the code referring to column f:f is highlighted yellow.
I encounter a runtime error '1004' if the "Invoices" sheet is not selected when I run this procedure. The last line of the code is one which is highlighted when I debug.
Sub ProcessData()
Dim aiOldRows() As Integer, aiNewRows() As Integer ' Arrays of new/old rows
Dim rngRaw As Range 'Data entry area
Dim rngInvoices As Range 'Invoices range
Dim rngOpenPoint As Range 'Top-left corner of data entry area
Set rngOpenPoint = ThisWorkbook.Worksheets("Data Entry").Range("a3")
Set rngRaw = Range(rngOpenPoint, rngOpenPoint.End(xlDown).End(xlToRight))
FindNew aiOldRows, aiNewRows, rngRaw
InvoiceSequence aiOldRows, rngRaw
Set rngInvoices = Range(ThisWorkbook.Worksheets("Invoices").Range("A2"), _
ThisWorkbook.Worksheets("Invoices").Range("A3").End(xlDown).End(xlToRight))
rngInvoices.Sort Key1:=Range("M2"), Order1:=xlAscending
End Sub
You'll notice that there are two other procedures (FindNew & InvoiceSequence) being called by this procedure. I don't think those have anything to do with the error, but I can provide the code for those if needed. Oh, and one other secondary question. To declare the ranges rngRaw & rngInvoices I pick the top-left cell of the data and then do:.....................
I'm trying to introduce some VBA code to an existing workbook that will automatically sort column A alphabetically on Sheet 2 (Summary) (excluding rows 1 & 2 as they contain headings) whenever the workbook is opened.
At the moment this code doesn't automatically run and when I run it manually I get a run-time error '91' the first time I try and when I run it for a second time (again manually) it works.
The code I've got at the moment is:
VB:
'The following code will run the sorting subroutine when the workbook is opened:
Private Sub Workbook_Open()
Call SortByWave
End Sub
'And this subroutine will enable the autofilter functionality, clear all existing filters and then filter the data on column A:
Sub SortByWave()
[Code] ......
This piece of code runs perfectly on its own but when called at the end of another code it fails and I haven't a clue why. The reference wsTmp is dim'd globally and defined in the main component where it is simply - worksheets("somename")
Run-time error '1004':
The sort reference is not valid. Make sure that it's within the data you want to sort, and the first Sort By box isn't the same or blank.
Private Sub FinalSort()
wsTmp.Cells.Sort Key1:=Range("D2"), Order1:=xlAscending, Key2:=Range("A2") _
, Order2:=xlAscending, Key3:=Range("K2"), Order3:=xlAscending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal, DataOption2:=xlSortNormal, DataOption3:= _
xlSortNormal
End Sub
If I protect a sheet but tick the boxes to allow sorting and autofilter I still get an erro when I try to use the sort buttons on the autofilter.
It allows me to use the filters but as soon as I sort I get told to unprotect the cells im trying to sort.
Is there a way around this where I can keep formulas from being touched but allow sorting of data through autofilter?
My code is :
Public Const GRAPH_PutData_COL1 = "A"
Public Const GRAPH_PutData_COL2 = "B"
Range(GRAPH_PutData_COL1 & "1").Sort Key1:=Range(GRAPH_PutData_COL2 & "1"), _
Order1:=xlAscending, _
DataOption1:=xlSortTextAsNumbers
it is showing error, "sort method of range class failed error 1004"
Above error only showing when first record is empty...
i added a "Microsoft office spreadsheet 11.0 " object using additional control and used it in my form of Excel Macro. then i added some data from the combo box to the embedded excel object dispalyed. the form displays correctly and am even able to add data to cells.
but am not able to sort a column. gives me the error message "Sort method of range class failed"
have tried to make sure the sheet is active using the ".Activate" with the object name. this is the only solution available on the existing forums.
I get a run time error 1004 when I run this sort.
ActiveSheet. Range("A1:AC277").Sort Key1:=ActiveSheet.Range("G2"), Order1:=xlAscending, Key2:= _
ActiveSheet.Range("E2"), Order2:=xlAscending, header:=xlYes, OrderCustom:=1, _
MatchCase:=False, Orientation:=xlTopToBottom, DataOption1:=xlSortNormal, _
DataOption2:=xlSortNormal
I have a list in rows where I have a ranking formula =COUNT($G$5:$G$81)-(RANK(G5,$G$5:$G$81)+ COUNTIF($G$5:G5,G5)-1)+1 When I sort the rank, ascending. All of the unique numbers sort ascending, but the non-unique numbers sort descending
ex) 1.751
2.52
3.753
418
417
416
Using DataEntry sheet for data.
Trying to rearrange the data to DataFormatedProperly sheet.
So far all I can accomplish is DataFormatedWrong sheet.
Edit: Not sure what happened but file was NOT understandable before. It should be correct now.
Is it possible to make excel sort ascending or descending but from mid way through alphabet and then loop through the alphabet again. for example. If Cell A1 had "A" in, it would sort as normal.
Cell A1 = A
Cell A2 = B
Cell A3 = C
Cell A4 = D
Cell A5 = E
If Cell A1 had "C" in, it would sort from "C" through the alphabet and then loop to the start of the alphabet as shown below.
Cell A1 = C
Cell A2 = D
Cell A3 = E
Cell A4 = A
Cell A5 = B
As of right now these are the steps i do to sort...i click custom sort choose My data has headers and then i select from the drop down list the word FRNAME.
is there any way i can setup a macro to do this for me? i tried recording the macro but it just is recording me choosing the column FRNAME is in. This does not work for me since FRNAME end up being in different columns all the time but will always be in row 1.
I would like to ask if it is possible to sort a range of row? What I mean is, if I sort like Row 1, the entire block of row 1 will move as well? Like if i have column A to F, then row 1 of column A to F will move together at the same time.
View 3 Replies View RelatedI am looking for a macro to sort my colums in ascending order the range i need sorted is from A7:F107, it will be sorted with the numbers in the A column ie 1 - 107. sometimes different numbers get added and it has to be sorted in number sequence.
If possible i would also like a macro to protect this range after the sort,