Excel 2010 :: Return Min Date In Range Where Adjacent Range Is Blank?
Feb 7, 2014
I am working in excel 2010. I have a tracking document that lists free tickets and their expiry dates. In the adjacent columns we track redemption details of these free tickets. What I want to do is return the oldest expiration date from A only if the ticket has not been used (i.e. B is empty). This will allow me to see the date the upcoming tickets about to expire so we can make sure they are used.
A________________B
Expiry Date________Redeemed by
15/08/2014
15/02/2014
15/08/2014________John
15/02/2010________Marc
15/02/2011________Bob
View 4 Replies
ADVERTISEMENT
Aug 5, 2013
I have a column of dates in Col H with associated values in Col I. I need to specify a date range in Cell I1 and I2 such that the row number for the first encounter of the first date is placed in Cell I3 and the last encounter of the end date is placed in Cell I4. For example, with this data when I specificy 4/2/13 and 4/3/13, I would like to get a 19 in Cell I3 and a 53 in Cell I4.
Matty supplied the formula in Col K for each of these cells. They worked well in the application that I supplied earlier (different locations for these variables), but my real application is as shown here, and these two formula give the incorrect results shown. Both of these formula are arrays.
Excel 2010HIJK14/2/201324/3/2013310=MATCH(I1,INT(H10:H5000),0)+1444=MATCH(2,1/(INT(H11:H5000)=I2),1)+1536789X10 114/1/13 1:366.97124/1/13 2:04134/1/13 2:04144/1/13 4:563.95154/1/13 4:573.27164/1/13 5:165.55174/1/13 5:172.35184/1/13 10:30194/2/13 14:00204/2/13 14:59214/2/13 15:01224/2/13 17:192.81234/2/13 17:191.59244/2/13 17:252.14254/2/13 17:262.05264/2/13 21:07274/2/13 21:07284/2/13 21:11294/2/13 21:11304/3/13 1:38314/3/13 1:38324/3/13 2:10334/3/13 2:10344/3/13 4:24354/3/13 5:152.84364/3/13 5:154.11374/3/13 5:173.45384/3/13 5:173.24394/3/13 9:35404/3/13 9:35414/3/13 9:59424/3/13 10:01434/3/13 13:36444/3/13 13:37454/3/13 13:41464/3/13 13:42474/3/13 17:124.03484/3/13 17:133.62494/3/13 17:15504/3/13 17:15514/3/13 21:12524/3/13 21:13534/3/13 22:214.41544/4/13 1:52554/4/13 1:52564/4/13 1:53574/4/13 1:53Ppk Raw Data (2)
View 2 Replies
View Related
Apr 4, 2008
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................
View 4 Replies
View Related
Mar 11, 2014
I am creating a template in Excel 2010 and am having some issues due to a combination of positive and negative values. Specifically, I have a named range of values that can have either a positive or negative deviation from zero. I need to return the value that has the greatest deviation from zero (either + or -) based on criteria in another named range I have used the following array formula with success for the "Y" range:
{=IF(PRB=M1,INDEX(Y,MATCH(MAX(ABS(Y)),ABS(Y),0)),MAX(Y))}
However, if there are not any negative values, as in the "Z" range, it only returns MAX(Z) for the entire range, when I would like ti to return "0.00134" (the largest deviation from zero based on the PRB range criterai. Would this be better accomplished using VBA?
PRB
Y
Z
A90B90
A90B-90
[Code].....
View 3 Replies
View Related
Jul 26, 2012
I've gotten the desired result in Column B, but this will not work going forward as we add to the table in columns E:G .
I'm looking to search between columns E:F, Identify the date-range where my dates in column A belong, and pull the corresponding rate from column G into column B.
Excel 2010
A
B
C
D
[Code]...
View 8 Replies
View Related
Nov 27, 2012
Using Office 2010, I am trying to do a averageifs formula for a specified date range. I can get it working by specifying the date range in the formula itself, however when "pointing" the formula to a specific cell with a date in it, the formula gives me a div/0 error.
Formula that works is:
=AVERAGEIFS('UHP Weld Data'!M:M,'UHP Weld Data'!B:B,"08/29/2012")
What I need is a version of: (currently not working)
=AVERAGEIFS('UHP Weld Data'!M:M,'UHP Weld Data'!B:B,"H1")
The date range will constantly change as I want it to show me the past 30 days only.
View 1 Replies
View Related
May 31, 2013
How to set up a formula on Excel 2010 using Conditional Formatting.
I want to identify duplicate account #'s within 15 days of the work date. Here is sample of the report.
Account Number
Facility
FC
Payor
Current Balance
Aging Level
Team Member
Work Date
87890
HHSS
1
BCBS OF TX (PPO)
$9,616.94
121+
Steven Johnson
5/20/2013
[Code] .........
View 4 Replies
View Related
Jul 9, 2014
Please find the attached 2010 version excel file <For a given date Time Range average .xlsx>.
I want to calculate the average value (Column C) for the given date (Column A) and given time range (Column B).
Values to be plotted in the color cells yellow and light pink / magenta.
Voting Results.xlsx
View 4 Replies
View Related
Oct 27, 2011
Using excel 2010
In cell U24 I have this formula:
=SUMPRODUCT(($E$3:$E$2000=51014)*($F$3:$F$2000=101)*($K$3:$K$2000))
Currently, as you can see, this is summing up the criteria specified from row 3 to row 2000...(which i made the last row 2000 becuase I will never exceed row 2000 with info)
What I am trying to do is in cell T22 and U22 be able to plug in date ranges and make the above formula give me the sums of thos date ranges.
For example in T22 put in 8-1-11 and in U22 put in 10-1-11, and have the sum of that date range populate in cell U24.
Now ther kicker is this: some dates are repeated so I may have six rows of date 8-3-11....and they will have to be part of the sum total.....and ALSO the dates are not in chrological order....I may have six rows of 8-3-11.......then four rows of 8-10-11.....then maybe another three rows of 8-3-11, and so on and so on...this is for all dates. Sorting the dates in order is not an option.
View 2 Replies
View Related
May 6, 2012
I am new to VBA. Using Excel 2010. I have a date picker on a userform named LtPayCalFm1. I have created a named range on a sheet within the workbook called LQD which is a date. I want the date picker to show the date LQD when the form opens. The code I have is
Code:
Private Sub LtPayCalFm1_Initialize()
Dim LQD As Range
DTPicker1.Value = LQD
End Sub
I get Run time error '380': Invalid property value How do I correct this?
View 7 Replies
View Related
Mar 27, 2014
I have on sheet "Charts" in cell "B20" a "date from" and in cell "C20" a "date to" (these will be input manually).
What I need is to check Column "F" on sheet "Report" for any cells within those dates, I then want to copy the entire row(s) that contain these dates and paste them into sheet "Weekly" starting at cell "A2".
Using excel 2010
View 4 Replies
View Related
Feb 7, 2013
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
View 7 Replies
View Related
Jun 21, 2007
I can solve my problem with a pivot table, and with VBA easily...however, I'm interested in knowing if this can be done with formulas (array formulas using index/match I'm assuming).
Goal: On sheet1 I have one column with products, then the column next to it will have an "Y" in it if the product is to be selected (blank if not). On sheet2 I want to create a list of the products that were selected (having the "Y"). The only thing stumping me is that I do not want spaces between the product list on sheet2...just a nice continuous list. Example:
Sheet1
cup Y
bowl Y
spoon
fork
knife Y
Sheet2
cup
bowl
knife
..not..
cup
bowl
knife
View 4 Replies
View Related
Jul 2, 2012
I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)
View 7 Replies
View Related
May 12, 2013
I am using Excel 2010 and I am trying to average the amount of days in a month to a daily average per person in my worksheet.
Total sales per person
A5 = 10 - This is the Grand total per person for column A
A6 =4
A7=6
Daily average per person
C5=2.6 - Average for all persons here
C6=2.0
C7=3.0
The formula I am using is:
=(SUMPRODUCT($A$6:$A$15,C6:C15))/$A5
Which gives me an answer of 2.6 in cell C5 as shown above which is what I am wanting.
Please note that my cell range for my staff goes from 6-15 for both Column A and C where the other cells are blank in both columns.
My question is, If I was to clear all the data in both Columns A6:A15 and C:6:C15, cell C5 would return to a #VALUE. How to I change the formula so that if the cells were Blank, cell C5 would also be blank until I enter data for each person again?
View 2 Replies
View Related
Jul 25, 2012
I'd like to sum a range of cells if the date in the adjacent cell is last month, so... A2:A1000 holds the dates and B2:B1000 holds the values, i'm trying to figure out how to sum all of the values for the previous month (i.e. June).
View 7 Replies
View Related
Jul 4, 2010
Is there a non-array way to return only the non-blank cells from a range? At the moment I use below formula, but it slows down the file considerably ...
View 14 Replies
View Related
Mar 19, 2014
in Excel 2010, whether using VBA or otherwise;
1) how can I return the oldest date in the entire workbook (or at least in the entire sheet if it's not possible to find that date in the entire workbook).
2) how about the most recent date ?
View 2 Replies
View Related
Jan 9, 2013
I have a rolling 12 month (each day in column) tab in Excel 2010 that references variances by ID number in column A, and the column headers are each day for 366 days (2011). I would like to create a tab that shows the past 10 day's variances by ID number. I haven't been able to write a formula that will look at the date headers and the row ID number to return the figure for that day. Here is a sample of the 12 month rolling and the 10 days at a glance that I want to populate.
Rolling 12 Months
IDName12/25/201212/26/201212/27/201212/28/201212/29/2012and so on
1234Employee Name - - - - (11.07)
1235Employee Name - - - 0.20 -
1236Employee Name - - - - -
1237Employee Name - - - - (1.00)
[Code] .........
View 4 Replies
View Related
Jul 1, 2008
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
View 2 Replies
View Related
Apr 24, 2013
Using one spreadsheet with three date columns and two columns counting days.
If there is a value in Resolution date, then Column N is blank
If there is no value in Submit date and Resolution date, then Column N is blank
If there is no value in Resolution date, and there is a value in Submit date, subtract Submit date from todays date to show how many days it has been pending approval
Created on = J4
Submitted on = K4
Resolution Date = L4
Days to Approve = M4 I've got that formula =IF(L4="","",L4-K4)
Days Pending Approval= N4 (cell with formula)
If Resoultion Date L4 has a value, return blank
If Submit on K4 and Resoultion date L4 are blank, return blank
If Resolution date L4 is blank, and Submit on K4 has a value, subtract Todays date from Submit on K4 to show Days Pending Approval
Cell J4______Cell K4______Cell L4__________Cell M4__________Cell N4
Created on___Submit On___Resolution Date___Days to Approve___Days Pending Approval
4/5/13_______blank______Blank____________Blank___________Blank
4/5/13_______4/5/13_____4/7/13___________2_______________Blank
4/5/13_______4/5/13_____Blank____________Blank___________()Today-K4
View 3 Replies
View Related
Nov 8, 2012
In worksheet1 I have a set of data. Column A is a value, column B and C are dates. In worksheet2 I have dates in Row 1 going out horizontially. I would like to create a fomula that returns the value in column A in worksheet1, if the date is between column B and C. I couldn't get my array to work. it's been a couple of years since I've wrote any indepth formulas.
View 7 Replies
View Related
Nov 28, 2013
Workbook contains a number of named ranges where the name is no longer used. I wish to remove the name assigned but not the actual range of referenced cells. When using Name Manager to try and delete the name the Delete button is greyed out and not available. Workbook is being heavily modified from its original form used by another. Is this possibly from a protected area from prior user? However, I have not had a problem creating new worksheets, cell ranges, etc. Also, even for new ranges I create I am not able to delete the name as the Delete button is greyed. What is going on and how can I delete just the unused range names? Version is Excel 2010.
View 3 Replies
View Related
Dec 30, 2011
I am trying to return the Min of a range of dates. The issue I have is a single date is repeated many times. Here is some sample data:
Sheet 1
Column A / Column B
1/11/11 / 15
1/11/11 / 20
1/11/11 / 5
1/15/11 / 30
1/15/11 / 35
Say on Sheet 2 I have a list of dates and Cell A1 has 1/11/11. In Sheet2!B1 I want a formula that uses the value in cell Sheet2!A1 and looks at the array on Sheet 1 that would return a result of 5 for the date showing (in this case 1/11/11).
View 2 Replies
View Related
Jan 14, 2013
I have a four columns, one with created date, one with proposed date, one with a name and one with a dollar amount, I want a formula that will look at the two columns with dates and report back based on the name, the total dollars of each line where the dates are prior to today.
View 1 Replies
View Related
Jan 27, 2013
I am trying to insert a Pivot table with dynamic Name Ranges. It needs to start from Cell B1 as Column A has hidden formulas in them. I created an Dynamic Name range and tried to insert a pivot table. Excel then throws out a error stating "Data source reference is not valid". I tried re-saving the document but still no luck.
View 1 Replies
View Related
Jan 27, 2014
I am relatively new to VBA and am trying to convert a range of data to a table in the same sheet. I receive the following message when I try to run the code as shown below:
"The worksheet for the table data must be the same sheet as the table being created." The code stops on the third line of the code.
Sheets("Data Forwards").Select
ActiveSheet.Range("$A$1:$U$1000").Select
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$1:$U$1000"), , xlYes).Name = _
"Table1"
ActiveSheet.Range("Table1[#All]").Select
ActiveSheet.ListObjects("Table1").TableStyle = "TableStyleMedium2"
I can see that the range is highlighted in the sheet before the code breaks.
View 3 Replies
View Related
Sep 6, 2012
Excel 2010. I have a macro, stored in a workbook.
The macro is: collecting data from another opened workbook,processing the data,saving the processed data in yet another workbook.
The workbooks' names it is operating on are hardcoded in the macro. I'm trying to make it more flexible, that is to allow user to specify both source and target workbooks along with the data columns.
The workflow follows:
User opens both source and target workbooks,User opens the workbook with the macro,User runs the macro (with a button for example),Macro prompts the user to select range in the source workbook,Macro "memorizes" the range and the source workbook's name from user's selection,Macro prompts the user to select range in the target workbook,Macro "memorizes" the range and the target workbook's name from user's selection,Macro processes the data.
I found out that this can be achieved with Application.InputBox("Select cell(s)", Type:=8) method. However there are some issues that I was not able to solve playing with the returned value's methods:
The .InputBox defaults to active workbook. I was able to select another opened workbook only with Ctrl+Tab combination, but it will not work with the end users - they are too poor with these tricks. Is there a better, more intuitive way to allow user selecting a workbook?I was not able to get the workbook's name from the .InputBox returned value property. I was trying with .application.caption and .application.activeworkbook.name - none of these worked. They returned name of the workbook with macro, not the one with selected range. How to get the workbook's name from given cells range?
View 2 Replies
View Related
Jan 6, 2013
Run on Excel 2010
Sub UseChangePassword() Dim wksOne As Worksheet Set wksOne = Application.ActiveSheet
' Protect the worksheet. wksOne.Protect ' Establish a range that can allow edits ' on the protected worksheet.
wksOne.Protection.AllowEditRanges.Add _ Title:="Classified", _ Range:=Range("A1:A4"),
_ Password:="secret" MsgBox "Cells A1 to A4 can be edited on the protected worksheet."
' Change the password. wksOne.Protection.AllowEditRanges(1).ChangePassword
_ Password:="moresecret" MsgBox "The password for these cells has been changed." End Sub
The red color code is giving error message: Application defined or Object defined error.
View 1 Replies
View Related
Jan 23, 2013
Excel 2010
I have this code in a macro, the range will change as more data is added. so that I dont have to keep changing the range. How can I have this code autofill from the activecell to the last cell that has data in column M.
Selection.AutoFill Destination:=ActiveCell.Range("A1:A50000")
ActiveCell.Range("A1:A50000").Select
View 7 Replies
View Related
