I'm trying to do a sumif based a range of dates but keep getting a "-" for the result.
In the past when using dates I've had to value the dates in order for it to work. I can't seem to figure out the formula this time around - any thoughts? See attached for sample - my 'broken' formula is in cell C29.
I have 2 Columns of Holiday Dates (Column A is the "FROM" date; and Column B is the 'TO' date) and Column C is Peoples Names corresponding to the Holiday dates:
ie:
COLUMN 1 ; COLUMN 2 ; COLUMN 3
A1= 2 Jan 13 ; B1= 10 Jan 13 ; C1= Tom
A2= 4 May 13 ; B2= 10 Jun 13 ; C2= John
A3= 7 Jul 13 ; B3= 10 Jul 13 ; C3= Tom
A4= 3 Aug 13 ; B4= 25 Aug 13 ; C4= John
A5= 6 Dec 13 ; B5= 15 Dec 13 ; C5= John.
I am trying to figure out a formula (eg SUMIF) to calculate and summarize the number of Days Holiday based on a person's name (eg Tom's total Number of days Holiday days) based on the above column configuration of Dates and Names.
On the attached file, I would like the values from the Transactions worksheet to show up in the appropriate cells in the XYZ Expenses worksheet. The catch is, I would like the XYZ Expenses worksheet to only show the values from the past week. Past week could be literally, but I'm guessing that might not be possible and it would have to use the past week from the most recent transaction date - which would be fine. So if it worked right, XYZ Expenses > F7 would show -$80, which would be from Transactions H3+H6 (and not -$130, from Transactions H3+H6+H9).
View 3 Replies View RelatedI cannot get my head around this loop, it has been a while since I did anything in VBA and am stuck. I have a list of trades on one sheet, would like to create a column that lists open trades as of that calendar day. Using Sheet(balance) column A as date range. What I am trying to do is test for condition if opening day is less than calendar day AND closing day is more than calendar day...then that trade is effectively open as of that calendar day...so would like to copy it with that calendar day in front of it.
Loop through sheet x and copy all that meet above criteria. Next calendar day, loop through all trades on sheet(x) again and copy etc...here is what I have so far, but I am afraid it is useless...
I've inherited a reporting process which I need to convert to Excel but my knowledge of excel functions is fairly limited. I've attached a sample worksheet which sets out exactly what I'm trying to achieve in the comments. However to summarize here I need to add the data which meets set criteria together and display the result on a different worksheet. The problem I'm having is that the "criteria" the data needs to meet is dependent on info from other cells.
For example I only the totals of the data in column D where the date in column A is 01/01/08 and the data in column E is 1 and the result is to be displayed on a separate worksheet if that makes sense. It's difficult to describe without seeing the example workbook.
I have a macro that hides rows in my workbook if certain criterias are met. I'd like to add a criteria to the logic that only hides rows if the date in cell 17 is less than 3 months from today's date. The date in cell 17 is shown in this format: 25-03-2008.
Sub ForceHide()
Dim ws As Worksheet
Dim line As Integer
Dim Endline As Long
For Each ws In Worksheets
If ws.Name <> " Total" And ws.Name <> "Batch" And ws.Name <> "Summary" And ws.Name <> "PivotTable" And ws.Name <> "Fields" And ws.Name <> "RTP" Then
With ws........................
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
i created a work sheet with the help of the wonderful people on this forum. my boss loved it! one problem they now want it to automaticly take out a date and time of the cells when the date rolls around again.
example:
12/25/05 late 00:20:06 when 12/25/06 rolls around they want the system to automaticly see it and delete it out with the amount of time they were late or sick ect.... or if the sup was out that day and comes in the next day the system will see that the date has past and will up date the info. the other catch is i need it to move everything up one space when it deletes somthing. i want it to read j18 and k18 as one and so through j and k 40 same for l and m n and o ect.... i attached the sheet
I want to count no of "yes" in Range Column B only if corresponding values in column A is less than 10/06/2008
Please see the attached file for refrence
I have been having problems all morning and have not been able to solve it!
I am sure this is very simple....
What I would like to do is assign the result of a sum to a variable. This part is easy what I cannot fathom or find any help with is the multipule criteria bit!
Here is the detail.
Column A - Employee Number
Column C - Area
Column F - Type
Column D - Amount paid.
I would like to sum the amount paid based on the 3 criteria, Employee Number, area & type and assign this to a variable to be used later in a sub I'm playing with.
I need to write an excel function/macro/code to assign yes or no to a cell if the Description fits a certain category. I have attached a sample workbook and will explain what I mean.
In the sample workbook, there is data on a company. This included a unique ID, city, state, and description. What I want to do is fill out the yes/no column. So if a particular company has 2 of the 4 necessary "Descriptions", then column G will return yes, otherwise No. It must return yes for a particular company/ID if 2 of the "Descriptions" are "Sale", "Service", "Business", or "Par". I only want it to count at least two unique descriptions.
For example, in the sample workbook, Company A has all 4 of the necessary descriptions, thus everything in column G for this specific client should be yes. For Company B, only 1 of the 4 descriptions matches, so it returns No for all Company 2 columns. Company C has 2 of 4, so it returns yes for these columns. Note, it doesn't matter for Company C that "Business" was listed twice. It only needs to count the first unique time that description occurs.
got a problem with a little piece of code witch need to check something and if its true then its has to do 1 and they i need another if... just look at the code :P
Sub Bevestig3()
Dim Msg, Style, Title, Help, Ctxt, Nadenken, bevestigmsg, MyString
Msg = "Heeft u alles goed ingevuld?" ' Definieert bericht.
Style = vbYesNo + vbDefaultButton2 ' Definieert knoppen.
Title = "Doorgaan?" ' Definieert titel.
Help = "DEMO.HLP" ' Definieert Help-bestand.
Ctxt = 1000 ' Definieert onderwerp
Nadenken = "test"
ActiveSheet. Unprotect Password:=Nadenken
bevestigmsg = MsgBox(Msg, Style, Title, Help, Ctxt)
If bevestigmsg = vbYes Then...................
I would like to know the function/syntax for determining the due dates given certain date ranges.
See attached sheet for the example : due dates example.xlsx
I have a gantt chart that was built in excel. I need to shade cells in the timeline based on persons title under each project.
I can provide a snip of what the layout looks like for a better visual. I want the PM's Green, Supers Yellow and Persons Reporting Orange.
To get the green bar shown is using formula: =SEARCH("Project Management",$E17) , The issue with this is it fails to consider the start finish dates. For this particular project it works but when the formatting is "dragged down" the issue arises.
I am attempting to find a way to search through a database I created based upon every day of the year. My goal is to have a user input a beginning date and end date for a trip, then my functions will return the range specified with each day and it's individual temperature average (in my database).
I also need generating the dates between the start and end dates that are entered by the user. I was considering combining Days360 with an Hlookup that searches through a massive sheet with all the dates for the upcoming year and then going down 1 in the column for the difference in the dates in each column.
Vlookup Help.xlsx
I have an excel sheet where I would like a user to enter a start date and end date(say Feb 1, 2013 to Feb 28,2013). And these dates will be able to change to whatever month the user wishes to look up in a specific date range(column A has 365+ dates). This post is closely related to [URL]... but I cannot figure out how to get it to work from my case.
So working off the same worksheet, I have the beginning date in AC35 and the end date in AC36 in which the user enters. I would like the dates that fall in this entire month, including the beginning and ending dates to be referenced when looking for the specific day that contains a value I have in S35.
In other words, I have data in columns A through N. The dates are in column A and S35 is a value obtained from using Max(L185:L526) where L185:L185 is manually selected each time I want a different month. I don't want this to be a manual process of scrolling down the spreadsheet to get the next month.
I would like to ask how can I get to work the index match function (if there's any formula other than this current function its fine) if i have a start date and end date as range date then another criteria for name to get my desired result. im having a hard time to explain so i attached a workbook so you can around it.
I found a formula and tweaked it but still cant get to work.
I have 2 ranges: 1."Task info" (4x4 range)
2." Dates" (24x2 range)
I have one variable cell ref: "Date1" (a date)
Based on "Date1" I want to copy the value in the "task info" and Paste special value that is next to the corresponding date in "dates".
refer to attached worksheet.
I need a way (Non-Macro please) - where if a condition is met, then fill a range with a particular value. The attached spreadsheet has a sample with explanation.
I'm trying to populate a dropdown Combo Box by using conditions.
In the example I attached...I would be trying to use ComboBox1.ListFillRange to populate the ComboBox only with players who have "C" in the Position column and "ANA" in the Team Code Column. Which would give me all the Catchers on the Angels.
I've been trying to use worksheetfuntion.Index.
I have a very large Excel spreadsheet that is generated through an Oracle application at least once a month at work. I would like some code (either a worksheet function or a VBA) to check and report the following. If the frequency in column C is "Monthly" or "Weekly" just go to the next row. If the frequency in column C is "Annual", add 183 days to the date in column B; if it is "Semi-Annual", add 92 days to date in column B; if it is "Quarterly" , add 46 days to the date in column B; if the frequency in column C is "2-Year", add 365 days to the date in column B. Once the check has been made; I need the new total or date that was calculated checked against the date the report is being run (system clock date). If the date or total days is less than today, a new worksheet, titled "Late" needs to contain that row of data. If the date or total days is greater than today's date, just go on to the next row. I've attached an example worksheet.
View 9 Replies View RelatedLooking to have a macro call a subroutine every time it finds a cell meeting specific criteria.
Code in plain english would look like this:
For EACH cell in range A1:BZ500 meeting the following criteria:
Cell value is a date
AND
Cell's date is at least a week or more in the future
AND
Cell background (Fill) = RGB color code: (R:191 G:191 B:191)
DO the following:
Call repeatingsub
I have a column CF which has to calculate the due date based on start date in column X and end date in column Y.
This is achievable however; I have dropdown columns in CE which has below option.
Below is the requirement.
If user select "Should Pay" from drop down in column CE, then in column CF the due date has to be Start date + 7 days
If user selects "Not to Pay" from drop down in column CE, then in column CF the due date has to be N/A or Blank
If user selects "Has Time to Pay" from drop down in column CE, then in column CF the due date has to be Start date + 9 days
If user selects "Misc" from drop down in column CE, then in column CF the due date has to be (End date - Start Date)/8+7
if this can be attainable either via formula or VBA.
So I've got a vertical list of dates in M/D/YYYY format, and I'm trying to come up with a method to pull certain dates that are greater than a given benchmark and paste those values in another column. For instance, if I've got a list with 3/3/2008, 5/5/2010, 6/6/2011, and 7/7/2012 I want to pull only the dates beyond 12/31/2010 (so would be the 6/6 and 7/7 ones).
I'm assuming this isn't doable with one formula, so I would need a macro. But I'm having trouble just even coming up with the logical operator for just one date. I must be doing something wrong here. If my date in B2 is 1/1/2009 and I have a formula as IF(B2>12/31/2009,"True","False"), I just get TRUE, which shouldn't be the case.
We want to count the numbers of days between two dates however of 2nd date is null...count till todays date
If ActivityType is "E" and DDate is null Count number of days from EDate till Today().
If ActivityType is "D", Count number of days between EDate and DDate.
Column F is the desired result, Number are asuming todays date is 10/31/2013
[Code]....
I'm working on a spreadsheet at work and I'm trying to sum only the values in a column that meet criteria in the column next to it. For example, in the attached spreadsheet, I would like to have a totals line at the bottom of the spreadsheet for all three Facilities and the total next to them. I know I could do a pivot table but I know this approach would be more aesthetic and easier for my supervisor.
View 3 Replies View RelatedI'm doing an assignment. This would be very simple w/ filters but I have to do it thru formulas.
I have a bunch of rows w/ various hotels. Row 14 is Rolling Meadows, Row 15 is Lakeview Apartments etc.
Near the top I have to add the number of times Rolling Meadows is mentioned, in the cell below Lakeview apartments, etc.
I tried a sumif formula but that doesnt work. How would you do this? This is what I wrote, I got 0
=SUMIF(B14:B26,"Rolling Meadows")
That's part 1. In part 2 I have to calculate the number of units in that building that are occupied.
we would like to get results from a formula that looks at several cells and provides the cost for a product.
Example
If we choose
Cell A3=Transport (from drop down list)
Cell A4=Entrance Facility (from drop down list)
Cell A5=Bandwidth (from another drop down list)
returns the cost for this product in cell A6
We would also like to restrict the lists to the different catergories: if transport is selected you only have the option of 2 of 5 facility types that will work with transport products. Do I need to separate my lists?
I need to get the sum of a column where two conditions have to be met. I have tried doing something like: Sum(Sum(AND(V1:V1500="BEBLT", H1:H1500=17) +-Sum(AND(V514:V1512= "NVLIV", H514:H1512=17)))
In a nutshell I want to find the difference between the sum of a column whose criteria is 17 and BEBLT and the sum of another column whose criteria is 17 and NVLIV. This has been extremely frustrating since I am using SQL commands to pull the info from the workbook. Typically I would use
"Select SUM(Z) from Sheet1$ WHERE (H1:H1500=17 AND V1:V1500);"
Unfortunately for me my SQL command brings back an error so I must resort to finding the total in excel and then using the command to bring it into my VBA.
I'm trying to use the SUmif with Offset, but the width argument of offset doesn't
seem to work within the SumIf function. I have 14 columns
A Employee
B department
C-N jan through dec salaries per employee per month
41 rows
1 titles
2-41 names of employees
now in May I want to know the salaries per department for the month may only, but also cummulative from jan up to may. Getting may per department works fine, but getting the cummulative doesn't seem to be working
=SumIf(B2:B40;"account";offset(C2;;4)) gives me the sum of department
Account in the month of May
=SumIf(B2:B40;"account";offset(C2;;;;4)) starting point zero (= january) plus 4
columns width, just gives me January.
I've tried several options, but every time he only sums 1 column. Without the SumIf it works fine but for the whole company, not per department ofcourse.
