Compare Three Cells And Delete Row
Jul 25, 2008
I am trying to write some code that will compare three cells on a row and if they match then it will delete the row.
Column U-has Y, N entered
Column V-has Y, N entered
Column O-has 1, 2, entered (some cells may have the fill color set to red)
I need the macro to look at Column U and Column V and for example if the cell U2 has a N, and V2 has a Y then the macro would look at O2 and it there is a 1 with the fill color set to red the macro will delete that row.
The spreadsheet will vary on how many rows it contains. It can contain up to 5,000 rows and the macro would need to go through all the rows.
View 9 Replies
ADVERTISEMENT
Jan 9, 2007
I have a data output from citrix that looks like the top half of the attached file. Each ID has 2 rows of data; open orders & recommended orders. Is there a macro that can sum up the two rows of data on to the first row (the one with ID and description in Collumn A & B) and delete the row afterwards, leaving only one row of data (format can be seen in the bottom half of the attached file). The original citrix report has hundreds of product IDs, which may vary from month to month. Original Format.xls
View 2 Replies
View Related
Apr 6, 2014
Find the attached : example.xlsx‎
My requirement is compare two cells a1 & a2 if found true highlight a2,compare a2 & a3 if found same highlight a3 or compare a3 and a4 and repeat the same for the entire sheet.
View 1 Replies
View Related
Oct 22, 2008
Attached is a sample data set. If all the positive and matching negative entries are located and removed, there are 4 remaining entries. The only pertinent columns are A through J, the columns after that are where my fiddling is occurring.
First you have to highlight all the data (including the control columns to the right). Then, my macro sorts the data by the absolute value (found in column O), allowing the formulas in N to then properly mark all negative entries with an "X and all the ones that now have a matching positive entry directly below it with an "X".
Then my macro hides all the fields with an "X" in column N. There is a macro called "CLEANSE" that does this, but only hides the rows. I keep messing up when I try to delete them entirely.
Can someone correct my macro so it will properly delete the rows with an "X" in the N column, or suggest a better macro that will scan the E column and flag matching positive/negative numbers and delete them without my control columns N and O?
View 3 Replies
View Related
May 28, 2013
I have a spreadsheet with 4 columns.
I would like to Compare Column A with Column B, if Column A contains text or numbers anywhere in Column B, then remove the corresponding rows not just in Column B, but Column C and D as well for that row.
View 3 Replies
View Related
Nov 2, 2009
I have several (Child) sheets of data which I need to compare to a (Parent) master sheet. If a cell in column "A" on a child sheets matches a cell in column "A" on the parent sheet, I need the row on the Parent sheet deleted so in the end, only the rows with no Child matches are left on the Parent sheet.
View 4 Replies
View Related
Nov 4, 2009
This compares cells in every sheet to a master sheet "AllUnits" and deletes all the matched rows on the Master. I modified it slightly to also delete the matched row on the source sheet as well (looking for rows that are not matched on any sheet). This works to a point, but I have to re-run it many times since when the source row is deleted, the code actually skips to the next row. I tried to reset the source variable with
View 2 Replies
View Related
May 18, 2006
I have two sheets with about 7000 records in each. They both have two columns only. One is the master list. I want both of the files to be compared and then all the duplicate entries to be deleted from both files.
Ultimately I want to have only the entries in the master sheet that are not in the other sheet.
View 3 Replies
View Related
Feb 8, 2008
I an using Excel 2003. In that i am having 2 columns (A&B). I need to take each value from Column A and search that cell value in Column B. If it is not found in Column B then delete the cell data in Column A. Then take the next cell data in Column A. Find operation and delete if not found. Do it for entire rows in column A. Then repeat that for Column B also. So my final result will be the same cell value in Column A and B. I need VBA code.
View 2 Replies
View Related
Feb 20, 2008
I an using Excel 2003. In that i am having 2 columns (A&B). I need to take each value from Column A and search that cell value in Column B. If it is found in Column B then delete the cell data in Column A. Then take the next cell data in Column A. Find operation and delete if found. Do it for entire rows in column A. Then repeat that for Column B also. So my final result contains uncommon cell value in Column A and B. I need VBA code.
View 3 Replies
View Related
Oct 7, 2009
I have column A that is 1,500 records.
I have column B with 40,000 records.
Among the 40,000 records in column B, duplicates of ALL 1,500 records from column A exist.
My question is: How do I find WHERE the 1,500 dupes are and how can I delete JUST those records?
View 3 Replies
View Related
Mar 14, 2012
I am fitting 2 sets of data to match eachother. I want to have as much data as possible but only for the same dates of each dataset.
I have 4 coloumns.
Dataset 1: A is date B is data
Dataset 2: C is date D is data
I want to compare A vs B one row at a time. If they are not similar it should delete and shift up the values in A+B or C+D according to the lowest value (date) of A vs B.
Remember that if the macro just deleted and shifted up it should compare the same (undeleted) value against the new value that just shifted up in the other coloumn.
View 2 Replies
View Related
Feb 4, 2007
VB code to carry out the following task?
Look at name in cell BC2, check the name in cell BA2 and if is the same delete the name in BA2 and BC2.
If is different then leave both cells as they are and move onto checking BC3 against BA3
carry this loop thru BC2 : BC40
View 9 Replies
View Related
Nov 24, 2007
I have a column of dates (B2:B1500) that I want to compare to a single date (A1).
If the dates in Column B are older than the date in A1 I want to delete the entire row.
View 3 Replies
View Related
Feb 22, 2008
I have a large data file. In column A is 8760 entries (every hour of every day of the year). Columns D & E are linked, Column D is the time and date whilst Column E is a parameter assocaied with that time and date.
There should also be 8760 entries in these columns, however there are some missing data lines in columns D & E. I would therefore like to move the rows in columns D & E so they match with the entries in column A. Can anyone help? I have a headache as i have over 70 files to complete this operation on.
View 9 Replies
View Related
Mar 26, 2011
Need to find a column of numbers from one worksheet and delete them from another.
Example
To be deleted is below:
83221
83223
83232
83233
83236
to be deleted from is below:
83221
83223
83226
83227
83228
83229
83230
83232
83233
83234
83235
83236
Another issues is that the worksheet that needs to have the numbers deleted from has 3 columns total so the whole row would need deleting, or if its easier I could replace the numbers with 0 and then sort and delete.
View 9 Replies
View Related
Feb 5, 2009
I've got two workbooks, Workbook1 with a list in column a and Workbook2 with a list in column F. I want to compare the cells in these columns and delete the entire row in Workbook2 if there is a match.
View 3 Replies
View Related
Mar 18, 2008
I am trying to create a way to easily maintain a list of outstanding checks. I am able to import cleared checks into the spread sheet but cannot find a way to compare the two lists and then delete the cleared checks off the original list.
View 2 Replies
View Related
Jan 22, 2008
I have the following code to compare two columns and delete adjacent rows if 1 is greater than or equal the other...
Sub LastReceipt_GT_Confirmed()
Dim intLstRow As Integer
For intLstRow = Range("E" & Rows.Count).End(xlUp).Row To 2 Step -1
With Range("E" & intLstRow)
If .Value > .Offset(0, 1).Value Then .EntireRow.Delete
End With
Next intLstRow
For intLstRow = Range("E" & Rows.Count).End(xlUp).Row To 2 Step -1 .............
View 9 Replies
View Related
Aug 6, 2013
I have two sets of data to compare. One is real world data, the other is forecasted data. I have real daily data for every day over about 3 months. The predictions though, there may be 4-6 predictions for ever one real daily value.
What I'd like to do is have a function that looks at Column A's date (real daily value) and Column C's date (predicted data) and if Column C equals Column A, then divide corresponding data in Column B by value in Column D.
View 2 Replies
View Related
Feb 18, 2010
In the attached excel file I have two macros that create hyperlinks:
1. BalloonToNumber - Creates hyperlinks from "Oval" shapes on sheet "Op60_1" to sheet1 (column D).
2. NumberToBalloon - Creates hyperlink scheme from sheet1 (column D) to sheet "Op60_1" "Oval" shapes.
In Q #1 my macro seems to skip some shapes on sheet "OP60_1" and I simply can not figure out why.
In Q #2 my macro creates hyperlinks to shapes that do not exist and hyperlinks to numbers that are not a "100%" match, IE: 182 and 82 would share the same hyperlink?
If you open the workbook and use the hyperlinks on sheet1 they will take you to sheet "Op60_1" and shape hyperlinks from sheet "Op60_1" take you to sheet1. On sheet "Op60_1" there are some red arrows indicating the shapes that get skipped when running the "BalloonToNumber" macro.
Shape color changes as the hyperlinks are selected from sheet1.....
View 8 Replies
View Related
Aug 24, 2012
So I have a sheet with 600 or so rows of data on a sheet called "Agent_Summary". On another sheet in the same workbook I have a list 20 peoples names. I am trying to find a way to look at the 600 or so lines on the Agent_Summary in column A and see if the name in that cell matches any of the 20 names from the "Team" Sheet. If the name on Agent_Summary is not found on the "Team" sheet then it clears the contents of that cell and moves on. Then it comes back and Deletes the blank rows. I can make it look for any 1 of the 20 names and the code works fine. How do I turn it into something that will look for any of the 20 names?
Here is my code to look for 1 of the 20 names that works great.
Code:
Sub Clean_up_Agent_Summary()
Dim Cell As Range
Dim R As Long
Dim RE As Object
Dim Rng As Range
Set Rng = Worksheets("Agent_Summary").Range("A5:A600")
Set RE = CreateObject("VBScript.RegExp")
[Code]...
"Worksheets("Team").Range("A5")" is where my 1 name is and the rest are just below that. I am thinking some kind of an Array but I am stuck on getting that set up and working right.
View 6 Replies
View Related
Jul 5, 2007
i've put this previously on here with no results. There is a formula already in there though does not work because what I want to achieve is to have Column A & Column C to Match Column E & Column F, to Return the Value YES or NO. I’ve Highlighted in ROW 947 one that should Say NO yet Says YES.
View 3 Replies
View Related
Aug 7, 2013
I have two cells which contain text, and I'd like to use IF function to compare between them. Something like: =(IF(A1=B1),"TRUE",FALSE"). But it seems like the function cannot do it with text..
View 3 Replies
View Related
Oct 5, 2009
I would like to compare 2 cells, Sheet1!B2 and Sheet1!B3
(
If sheet1!b2 is between the values of "D101" AND "D105", OR EQUAL TO "D201", OR EQUAL TO "D203", OR EQUAL TO "E110", OR EQUAL TO "E111", OR between the values of "H107" AND "H110" OR between the values of "H107" AND "H110" OR between the values of "H203" AND H205
)
AND
(
if sheet!b3 is EQUAL TO "E" )
then output a 1, if not, output a zero
The formula, which I deleted, excel reports back as being too long
View 3 Replies
View Related
Apr 7, 2012
I want to compare the value of D8 to the value of the last cell in Column D with data. I have the following code but am stuck! (This is code that I was writing from scratch and may not actually work)
Code:
Dim myRng As Range
Dim C As Range
Dim lr As Long
On Error Resume Next
[Code] .........
I am stuck on the "Else" statement...If they don't match then change the color of cell D8 if they do match I want to do nothing.
View 3 Replies
View Related
Mar 18, 2008
I want to do is create a function that will allow me to compare various cells. For instance, we have people scoring applications and I want to see if raters' ratings are within 10 points of each other. If raters differ by 10 points I want to print conf call on my spreadsheet (so I can schedule a conference call for raters to discuss the 10 point difference). If raters are within 10 points then I want to print "compute mean" (so I will generate a mean for each applicant).
I can get Excell to compare one rater against another (=IF(C3-C4>10,"conf call","calculate mean"), but I do not know how to make it compare all raters. For example, I have four raters and I want to be able to compare rater 1 to rater 2 and rater 1 to rater 3 and rater 1 to rater 4 and then rater 2 to rater 3 and rater 2 to rater 4; and lastly rater 3 to rater 4. Then if any rater dyad is different by 10 points I want to print our "conf call", but if there are no differences (by 10 points) then I want to print our "compute mean".
View 9 Replies
View Related
Dec 8, 2006
I converted a very large PDF to Excel. I want to run a logical formula that will compare a mailing address and property address. My formula goes like this: =if(a1=b1,"yes","no"). However, when I run my formula I am getting False for every line even though I can plainly see the answer should be yes. My guess is that it has something to do with the formatting of the text inside the cells that I'm comparing but they seem to be formatted the same. The strange thing is that if I manually type the information and run the formula, it comes out fine. I have more than 37,000 lines of text so I cannot manually retype the whole thing.
View 4 Replies
View Related
Mar 7, 2008
I am trying to code for the following conditions and will like to know how I can embed these conditions into one statement.
IF(AND(X>365, A>B), C*D
IF(AND(X>365, A<B), E*F
If neither of the conditions apply, then 0.
View 5 Replies
View Related
Jun 9, 2014
I'm trying to match and make judgement for my excel file and return as "OK" or "NG"
Eg.: New Picture.png
View 6 Replies
View Related