This compares cells in every sheet to a master sheet "AllUnits" and deletes all the matched rows on the Master. I modified it slightly to also delete the matched row on the source sheet as well (looking for rows that are not matched on any sheet). This works to a point, but I have to re-run it many times since when the source row is deleted, the code actually skips to the next row. I tried to reset the source variable with
View 2 Replies
I have two sheets with about 7000 records in each. They both have two columns only. One is the master list. I want both of the files to be compared and then all the duplicate entries to be deleted from both files.
Ultimately I want to have only the entries in the master sheet that are not in the other sheet.
Need to find a column of numbers from one worksheet and delete them from another.
Example
To be deleted is below:
83221
83223
83232
83233
83236
to be deleted from is below:
83221
83223
83226
83227
83228
83229
83230
83232
83233
83234
83235
83236
Another issues is that the worksheet that needs to have the numbers deleted from has 3 columns total so the whole row would need deleting, or if its easier I could replace the numbers with 0 and then sort and delete.
I have 2 worksheets in which the worksheet named Existing Items has a table consisting of list of items with their unit price & worksheet named New Items also has a modified table with updated items (some parts might be added, removed, modified or unchanged). I have attached the test workbook (Sample.xlsx) here for your reference.
I am looking for a macro that compares these 2 sheets with the Part Number as a Unique Identifier & displays the result in the following manner:
New items added in New Items -> List these items in the Items Added worksheet Items removed from Existing Items -> List these items in the Items Removed worksheet Items whose price has changed in New Items -> List these items in the Price Change worksheet Items whose price has not changed in Existing Items & New Items -> List these items in the Unchanged worksheet A Summary worksheet which shows the count of items added, removed, modified & unmodified
Note that I have already included information in the Existing Items, New Items, Price Change, Unchanged & Summary worksheets just for your reference but this needs to be done by a macro.
I receive a workbook each day with approx 500 tabs of call data and I would like to relabel all the tabs with the user names. The user names are in a merged range "A7:M7". I'm having difficulty getting the following script to rename the sheets. Currently the values in "A7:M7" look like "User: ADAM ENGEMANN-558".
I am trying to delete each occurrence of "User: " while naming the sheets as well as removing the merged range before doing so that the names are in A7 only. The sheet names should look like "ADAM ENGEMANN-558", or, ideally just "ADAM ENGEMANN". For some reason my code will not modify the cells. (See attached example)
This works if I manually unmerge the cells before running and remove the ":".
VB:
Sub RenameSheets2()
Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets
If ws.Range("A7").Value <> "" Then
[Code] .....
This his how I modified it but it doesn't work on the supplied sheets. Please note that if I manually insert some blank sheets into my workbook and merge the cells etc it does work. There seems to be something odd going on with the sheets they are giving me. (they aren't protected)
VB:
Sub RenameSheets2()
Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets
If ws.Range("A7").Value <> "" Then
I tried adding the following to remove the merged ranges and remove 'User: ' from the names
Range("A7:M7").Select
With Selection
.WrapText = False
.MergeCells = False
[Code] ......
CallSample2.xls
I have received following macro from someone to delete series but the problem is that it gives error when some sheets are protected, and I want those sheets to protected. When run it will ignore/leave protected sheets but delete series only from unprotected sheets
Private Sub CommandButton1_Click()
Dim Rng As Range, i As Long, r As Range, lVal, uVal
Dim DeleteCount As Double
Dim lRow As Long
Dim dr As Long
Dim dc As Long
dc = Sheets("Deleted Numbers").UsedRange.Columns.Count - 1
dr = Cells(Rows.Count, Sheets("Deleted Numbers").UsedRange.Columns.Count - 1).End(xlUp).Row + 1
If dr = 60001 Then ................
I know,there are "compare sheets" threads everywhere,but i think every thread is different,because we want different comparison and different results
To the point now.What i actually want to do is a "turnout" of difference between two sheets.Both sheets use columns A and B. On column A there is a code and column B the quantity of the code. So obvisously i want to compare those two columns of these two sheets,and paste the results on a different sheet. The difficult part is that the same code of a cell in Column A with its column B must be sorted so i can see the difference...else it would be a mess.
I put the following together. The is that it loops through row A until it gets to the last cell. For each loop it loops down the column to the last row of data looking at the same cell on sheet 2.
But I'm having trouble with the Range(RngCell, Y).select portion. As the active cell can't be a static column letter I need to reference the active column.
Code:
Sub SheetComparison()
Dim rngCell As Range, rngMyRange As Range
Dim lngLastRow As Long
[Code]....
We have a software that we use for budgeting, and every now and then, we have to export and validate the data in Excel to be in sync with the system. What I would like to do is after extracting the data into a spreadsheet, compare it with VBA and create a report in a seperate sheet, that shows the differences between sheet1 and sheet2. The data has 11 different dimensions from column A to K and is in the same order both in the master and recon files.
AU ID
Accounting Unit
Description
Lawson Division
Division
Product Line
Mid/View Consolidator
Mgr Responsible
Cost Center
Opex Rpt
Allocation Pool
I have found a compare macro which only compares and finds the exact match of the sheets in exact cells
Sheet1(A1) 1 Sheet2(A1) 1
Sheet1(A2) 2 Sheet2(A2) 2
Sheet1(A3) 3 Sheet2(A3) 3
Sheet1(A4) 4 Sheet2(A4) 5
Sheet1(A5) 5 Sheet2(A5) 6
If this was the case then everything as of cell A4 would be marked as an error, even though I have the value in a different cell in the next sheet.
I have two spreadsheets each with "Vendor names" on column A. sheet 1 is my master sheet and sheet 2 is the sheet that has the information i like to carry over to sheet 1 when the conditions are true. Hence when colum A on sheet 1 equals column A on sheet 2 copy the range of cells b-h in sheet2 to match to sheet1.
here is my code i figuere that if i stared with two columns it would be rather simple however i cant even get my own code to work. Any help or suggestions would be greatly appreciated. By the way my spreadsheet is 6,000+ lines long
Here is the code
Sub compares()
Dim rng1 As Range
Dim rng2 As Range
Dim RowNo As Long
Set rng1 = Worksheets("Sheet1").Range("A1", Worksheets("Sheet1").Range("A" & Rows.Count).End(xlUp))
Set rng2 = Worksheets("Sheet2").Range("A1", Worksheets("Sheet2").Range("A" & Rows.Count).End(xlUp))
For Each c In rng1
If Application.WorksheetFunction. CountIf(rng2, c) > 0 Then
RowNo = Application.WorksheetFunction.Match(c, rng2)
c.Offset(, 1).Resize(1, 2).Value = Worksheets("Sheet2").Range("B" & RowNo, "C" & RowNo).Value
End If
Next c
End Sub
I am trying to write some code that will compare three cells on a row and if they match then it will delete the row.
Column U-has Y, N entered
Column V-has Y, N entered
Column O-has 1, 2, entered (some cells may have the fill color set to red)
I need the macro to look at Column U and Column V and for example if the cell U2 has a N, and V2 has a Y then the macro would look at O2 and it there is a 1 with the fill color set to red the macro will delete that row.
The spreadsheet will vary on how many rows it contains. It can contain up to 5,000 rows and the macro would need to go through all the rows.
Attached is a sample data set. If all the positive and matching negative entries are located and removed, there are 4 remaining entries. The only pertinent columns are A through J, the columns after that are where my fiddling is occurring.
First you have to highlight all the data (including the control columns to the right). Then, my macro sorts the data by the absolute value (found in column O), allowing the formulas in N to then properly mark all negative entries with an "X and all the ones that now have a matching positive entry directly below it with an "X".
Then my macro hides all the fields with an "X" in column N. There is a macro called "CLEANSE" that does this, but only hides the rows. I keep messing up when I try to delete them entirely.
Can someone correct my macro so it will properly delete the rows with an "X" in the N column, or suggest a better macro that will scan the E column and flag matching positive/negative numbers and delete them without my control columns N and O?
i have a list of information on one spreadsheet, for instance in column A i have countrys in column b i have descriptions and in colum d i have names. there is several hundred lines of this information and someone has gone in and edited some, taken a few lines out etc, i was just wanting to know how i can compare the two sheets to see what changes have been made? Or what now doesn't match up etc?
View 6 Replies View RelatedSheet summary2 has the table. And I am looking to compare and add the data (from all sheets Date 1 to Date31) . I am looking to add those values (yes as 1) in my summary 2 sheet for the range E3 to H14 ...if it mathces as MF8330 or x543 or c5045 or x940.
View 4 Replies View RelatedMacro that compare between 2 tables in 2 different sheets - BOM (Bill Of Materials) compare
And Create a Table with all differences.
Table 1 (sheet1):
PartNumQTYLocation
000 2 A1
111 3 B1
222 1 C1
333 4 D1
Table 2 (sheet2):
PartNumQTYLocation
333 3 D1
000 2 A1
111 3 B2
222 1 C1
444 5 E6
Table with all differences (sheet 3):
PartNum (Ver1)PartNum (ver2)QTY (Ver1)QTY (Ver2)Location (Ver1)Location (Ver2)
111 111 3 3 B1 B2
333 333 3 4 D1 D1
Blank 444 Blank 5Blank E6
The code below compares values on sheet 4 column A to sheet 3 column A and then colors a cell "Green" (Temporary), later I will place data from sheet 4 into sheet 3.
I dont know why but when it finds data on sheet 4 that is not 100% numeric it errors out.
Run-time error '91'
Object variable or With block variable not set.
The data in sheet 4 column A is primarily numeric, there are and always will be some numeric/alpha strings.
I can change the value of sheet 4 A2 to "123x" from "123" and the code stops as described. Leaving sheet 4 A1 as 100% numeric, which works fine.
I'm not 100% sure how to describe what I need to do but here goes. I have two similar spread sheets. The first contains all the products in a shop with the new prices and new item codes.
The second sheet has all the old item codes old prices and some duplicates and items that do not exist any more. Both spread sheets have lots of column but only 3 that I need to worry about. Item code, Product Name and Price.
What I have tried is using the If command (in the item code column) to search through the Product Names (on the updated sheet) and put the right item code next to the right product (on the old sheet) but it didn't work.
I will like a macro to compare row one to row one on sheet 2 column A. If the number is the same then it will compare from the same row column K from sheet 1 and column m from sheet2. If it is less then copy to sheet4 and highlight in red, if more than highlight in blue and if equal green.
View 6 Replies View RelatedIf the record exists in both sheets then compare the value in col. H for both records, if the value is different then copy the entire record to a third sheet.
There are 16,000 rows of data to do comparisons.
I have been thinking about a Vlookup method as one choice, my thought is this going to be slow.
I have read about vba having some comparison choices, vbbinary, vbtext, but I do not have any knowledge of this, so cannot intelligently choose what options to begin w/.
I have 2 sheets that have 15 columns and approximately 200 rows on average, but the number of rows varies from week to week. I need to compare the information on sheet 3 to the information on sheet 1 by row. There are actually 3 worksheets total, but the 2nd worksheet is not involded in this macro. If the 2nd-14th columns are an exact match, I need to have the date from the first column and the notes from the 15th column (the formatting has to be copied too!!!) on the first sheet copied over to the matching row on the third sheet into the 1st and 15th columns, and the 16th-18th rows on the first sheet need to be copied over to the third sheet as well. After all this is done, the row on the first sheet needs to be deleted.
I need it to compare all of the rows this way, and unfortunately, I think it is going to have to loop through every row on the 1st sheet for every row it is comparing from the 3rd sheet.
I know this will take quite a while to compare, but given this takes me a couple hours on average, letting the macro run for 5 or 10 minutes is a vast improvement
I'm trying to cmpare two excel spreadsheets, each one of then have 3 columns with column A being the KEY to lookup and compare records into another spreadsheet. So in my example spreadsheet If u take cell ZVNA!A1 and lookup for values in ZSKU!A* and find a match then comapre the B1 and C1 in respective ZSKU! Column B and C. If there is a record for A1 in ZVNA then comapre it's column B value with column B value of ZSKU, and column C value with column C value of ZSKU. I have not used macro/vba before so if you could tell me formula based solution that will be good or point me how to use macro. I did Vlookup but it did not return me 100% accurate result may be bec my format of column is not accurate.
View 2 Replies View RelatedI am in the process of comparing values between two sheets.
I would like to search on column A on both sheets and check whether there is a corresponding value in the sheets.
If there isnt then I would like to take that record and put it into a new sheet.
My code is as follows
Public rowcn
Sub auto_open()
Dim iCounter As Integer 'counter as integer
data_sheet = "CASES_ANALYS"
data_sheet2 = "A_CASES_"
target_sheet = "Final Report"
Currently I'm just displaying it in a msgbox but would like to paste the specific record into another sheet but not sure how to do this.
So far this code doesnt work
I have 2 sheets that either contain the exactly or close to same data. I have Sheet1 and Sheet2, and I want to highlight ALL cells in Sheet2 that are not the same as the ones in Sheet1. That is, I need to give a cell in Sheet2 a different background color (to highlight) if:
the cell in Sheet2 has a different value than the cell of the same location in Sheet1
the cell in Sheet2 is blank but the cell of the same location in Sheet1 has something in it
the cell in Sheet2 has something but the cell of the same location in Sheet1 has none.
All highlighting needs to be done in Sheet2. The problem with the codes that are already available in this forum seem to have problems when the ranges of cells used in the two sheets are different (out of bounds, etc...)
I have a spreadsheet with 4 columns.
I would like to Compare Column A with Column B, if Column A contains text or numbers anywhere in Column B, then remove the corresponding rows not just in Column B, but Column C and D as well for that row.
I have several (Child) sheets of data which I need to compare to a (Parent) master sheet. If a cell in column "A" on a child sheets matches a cell in column "A" on the parent sheet, I need the row on the Parent sheet deleted so in the end, only the rows with no Child matches are left on the Parent sheet.
View 4 Replies View RelatedI have a data output from citrix that looks like the top half of the attached file. Each ID has 2 rows of data; open orders & recommended orders. Is there a macro that can sum up the two rows of data on to the first row (the one with ID and description in Collumn A & B) and delete the row afterwards, leaving only one row of data (format can be seen in the bottom half of the attached file). The original citrix report has hundreds of product IDs, which may vary from month to month. Original Format.xls
View 2 Replies View RelatedI an using Excel 2003. In that i am having 2 columns (A&B). I need to take each value from Column A and search that cell value in Column B. If it is not found in Column B then delete the cell data in Column A. Then take the next cell data in Column A. Find operation and delete if not found. Do it for entire rows in column A. Then repeat that for Column B also. So my final result will be the same cell value in Column A and B. I need VBA code.
View 2 Replies View RelatedI an using Excel 2003. In that i am having 2 columns (A&B). I need to take each value from Column A and search that cell value in Column B. If it is found in Column B then delete the cell data in Column A. Then take the next cell data in Column A. Find operation and delete if found. Do it for entire rows in column A. Then repeat that for Column B also. So my final result contains uncommon cell value in Column A and B. I need VBA code.
View 3 Replies View Relateddesigning a macro, which can compare the sheet1 and sheet2 data (exclude E and G columns) and find duplicates rows of data in sheet1 and sheet2. The output after the macro, would be show duplicates found in sheet1 and sheet2, through highlighting the rows.
attached file for the sample data:
output_data.xls
3 Sheet Excel document- What i'm trying to do is compare the contents of Column A sheet2, with Column J sheet3.
I would like only the variances printed on Sheet A. So- Sheet A says "The following was found in Sheet2!A, but not Sheet3!J"
Demo excel spreadsheet attached. Comparing "NASC Column A" with "RQ4 Column J"
