once I get the pretty boxes and such, how do I link this form to a sheet to record data? How do I get it to run? I have tried searching the forum, but it seems that most of you already know that part and don't have any problems there.
I know this is probably very very basic and I will smack my face with my hand when you point it out. I just have never created forms with Excel before. I am used to using SalesLogix and when I create forms there, I have a database table that I can link each field to, so I keep looking for how to link to the table and I can't figure it out.
I am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
I've created the form and formatted everythig as I need it but now I am clueless how to make the command button (enter data) post the data to the appropriate cells in my spreadsheet. I especially need the data to find the first empty row so that it doesn't overwrite the previously entered information.
VBA code to get userform input from form to "Data" worksheet. Data starts at columns A3..AG3. I need the code for the "Input" button to put Month, Date, Type, Comments under their corresponding columns and the "Amount" to go under the appropriate column that is selected by the Option Button. I've included a picture with in "red" comments.
Can I Restrict Excel Data Form only for appending new record. (No deletion allowed) and also Can I save Data Form in the File? Is there any way, whenever we open the file Data Form should popup?
I'm missing something in my UserForm initialization code. If I fill the form out once and click 'OK' (run the code to put the form data into a sheet), when I go back into the form all the old info is still there. If I then click 'Cancel' (Unload Me) and reopen the form, the old data is cleared out. What am I missing to make it clear it out the first time?
Basically, I have a large spreadsheet with basic data including names, dates and a unique identifier number (UIN). I have created a questionnaire in a userform (with a UIN txtbox) and want to link the answers to the specific individuals on the worksheet.
i.e. If UIN 201 fills in the questionnaire on the userform it will enter the details on the spreadsheet next to the details already entered for UIN 201.
I have SQL data that I'm extracting and populating two sheets accordingly on daily basis. (This is done manually and sheets are refreshed with new data)
Name of tabs: (Peaked & Confirmed)
Each sheet consist obviously of different data but table extract contains the same name & number of columns.
Name & Number of Columns :Org_province Port_Of_Load Port_Of_Discharge BK_Client_Name FF_BK_Name VesselVoyage GrossWeight Export_Closing_Date_Yard................
I've taken some time to learn about building an excel data entry form. I'm looking to add a find button.
1) users would type in something in the ID text box, then click on "find". The code will then try to find that record in the worksheet(just sheet1).
when it is found, i want the forms to auto-populate values from that row.
right now, the search works except when you are trying to search a value that that is NOT in the worksheet. I'm getting an error message that i've never seen before.
I'm trying to tweak this code from a previous form I created but I'm getting a compile error message. On my old form...the first box was a combo list box where the person entering data would select a value. On the new form, its a text box where the person will enter the value. I thought I could just change the me.cbo[name].listindex to me.tbo[name].listindex - but that seems to be causing the issue. I'm not sure what I would put after the me.tbo[name]. to get the code to run...
Code:
Private Sub cmdAdd_Click()Dim lRow As LongDim lPart As LongDim ws As WorksheetSet ws = Worksheets("DataNEW")'find first empty row in databaselRow = ws.Cells(Rows.Count, 1) _ .End(xlUp).Offset(1, 0).RowlPart = Me.tboProdCode.ListIndex
So I have a set of data in my sheet 2 that I want to be connected to sheet 1. The data in sheet 2 looks like this,
NO Reaction H S
1 2Fe2O3 + 3C = 4Fe + 3CO2
105690
120.21
2 Cr2O3 + C = 2Cr + 1/2CO2
218,085
59.24
while in sheet 1,Reaction No
Carbothermic Rxn
H
S
What I want to do is that when I put a reaction no (e.g 1) at the empty cell next to the label Reaction No, the data in sheet2 (i.e. Reaction, H and S) would automatically be reflected in the empty cells next to Carbothermic Rxn, H and S.
I have 4 sheets from sheet1 to sheet3, I typed code date and quantity which the code has 5 columns. In sheet 4 I have defined dropdown in I2 Cell(yellow fill) which has all code fromsheet1 to sheet3. So my purpose is that in sheet 4 I want to select code in I2 cell then it will appear in code column date and quantity automatically for the last cell of date and quantity. Note: I'm looking only the last cells when I select the code in dropdown.
I have a column of data that constantly changes in length and want this column to autosort the data alphabetically when the data changes. the list contains the names of worksheets
I then want to display in the next couple of columns data from the worksheets listed in the column. i know i can do this manualy by saying that that the cell equals sheet? cell etc but was wondering instead on putting in a formula of ='A sheet'!E20 i can put something where A Sheet is that uses the name in the column of data ?
I am looking to connect 2 form control boxes and have the second box run 2 different types of macros. The first box will have only 2 options - select by week and select by month.
The second box should show the list of weeks or months based on the selection in the first box. Then for the second box, if weeks is shown, a week macro should be run whenever a week date is selected. Similarly for the list of months, a month macro should be run whenever a month is selected.
I have been trying to do this for more than a week (after posting on this board) without success. I apologize if this seems like a duplicate post.
I need to create a Macro that will link Horizontal data to vertical data in a separate sheet. Here's the Example:
I have data in a forecast spreadsheet that is horizontal, So, J2:U2 (12 columns for 12 months). This row of data needs to be linked in a single column of data on a separate sheet called "Price_Quantity". So I need C3:C14 (in price_quantity sheet) to be linked to the data in J2:U2 (in forecast sheet). Then C15:C26 needs to be linked to J3:U3, so on and so forth. 12 rows linking to 12 columns. All the way until C4959:C4970 is linked to J415:U415.
I'm trying to make a floor plan which shows what seats are available depending on the time it is. So I made sheet1 = to the map (where the seats are located), sheet2 - rows = seat #'s, columns = Time (broken down by half hours). Now i have conditional format to show "t" in red (which means taken), "f" in blue (which means free), and "n" to show in gray (which means not working).
What i need is example - Seat # 200 in sheet 1 to show red, blue, or gray depending on the value in the row that corespond to this seat and the column that corespond to the current time.
Now that the calculations are working, with the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
I'm trying to link two combo boxes via a user form. I'm trying to select a city in one combobox which in turn would provide a listing of zip codes for that particular city in the next combobox.
I have an excel that has dropdown column from form control, in F4 there is a formula of vlookup that take the range from A2 to B20 in consideration but the reference cell that is given to vlookup formula to pick corresponding value is E4 which is also the reference cell of dropdown box and therefore its not showing any name rather than a value, problem with the formula is that when we select any name from dropdown it does not respond to any value in F4 despite changing values in E4.
I've run into an issue working on a small project.
The project:
A workbook in which sheet 1 is a form for people to input into 2 adjacent columns time spent on different tasks at the end of each work week. Sheet 2 is identical to sheet 1, but has the intended purpose of storing the data input into the form in sheet 1.
There is a button at the bottom of the form in sheet 1 with an assigned macro that effectively transfers all the data to sheet 2 and then clears sheet 1 for another entry.
The issue:
I cannot get the data to transfer to the next available set of 2 adjacent columns in sheet 2. It keeps repopulating the first 2 columns.
modifying the macro to transfer data to the next available set of 2 columns on sheet 2
Is it possible to have a user form command button perform link or steps that are recorded with macro recorder? I am trying to reformat cut and paste a xls raw data file. I am trying to keep my file uploads to a min., but can upload an example if necessary.
How to fill a web form automatically with excel data. I need to sign up like 300 people on a site per day. Their detail are given to me in excel. How can I automatically fill the form with the excel data without spending time doing copy and paste for each person's data?
Currently I work on a file which will be more like a form which will be filled by user and after he or she hits the button, the filled data will be written or sent to another Excel file or even Sheet in the same workbook which will store the filled data in database like form. The same as some web form which will post the data to database.
In other words, the workbook contains to sheets, one with forms to be filled in (cells) and one with specified columns. After filling in the cells on the first sheet and hitting the button, it will trigger the macro which will send data to second sheet and post data from each cell to appropriate column.
I am trying to create a form to use as a golf tracker. I basically have created a scorecard where I input the date, score, fairways in regulation, greens in regulation and putts. I want to be able to put that information just like if it was a scorecard and then have a button that says submit. Then that information is output into individual sheets (i.e. one for scores, one for fairways, one for greens and one for putts).
I'm having trouble trying to come up with a way to insert data fields into a spreadsheet form. I have a travel authorization form that I would like to have automatically fill in the required fields based on typing in a name. i.e. I would type in an employees name, and it would automatically fill-in the correct address, etc for that employee. I have attached a spreadsheet that contains one sheet as the form, and another sheet containing the employee data. I know nothing about VBA, but I have a feeling that is where I need to go.
I am needing to create a form that exports data (a quote) to an Excel Db (table) and is then able to recall the data back into the form. (the default form in excel does this and I want to copy that.)
Once the data is called back in, I can then export it to another Table to show that the quote has been approved and will be used.
I am having trouble with the VBA coding that copies the inputted quote in Cell C2 (the reference for the quote number) of the "Form" sheet and looks it up in the "Database" sheet. I have tried several variations of code, but nothing works so far.
-SS Sub RecallQuote() ' ' RecallQuote Macro ' Sheets("Form").Select Range("C2").Select 'this is the cell that holds the quote number to look up from the table
I am trying to set up payment record sheet as follows
First Tab: This is the total value of each item, with the payment date in cell C1
Second Tab: Is the payment date of the item
Third Tab: Is the payment due tab
So what I want to do is enter the payment in C1 on the first tab. Then on the second tab I want to enter all the items that want paying on that day, but this will also have previous payment dates shown as a sort of record of what was paid on what day.
On the third tab I want it to show all the payments that correspond to the same date as C1 DATEVALUE
And on the gross tab I want to show all payments to date including the current date.
I have got the payment date to work but I cant get it to show all the previous values.
