Linking To Last Record In A Spreadsheet
Dec 31, 2008
I am formatting a workbook so that the first table is a flat database of information used in other tables in the workbook. Each row in the tables would correspond to the values for a specific year thus,
year|weight|length
1999|24|123
2000|27|134
2001|21|121
2002|25|132
2003|19|112
2004|31|135
2005|22|126
2006|27|145
2007|28|147
I would like to have other tables reference this table and automatically update for the last record in the table so that the second table in the workbook would show,
year|weight|length
2007|28|147
My goal is to be able to go into the first table flat database tomorrow (Jan 1, 2009) and insert,
2008|29|110
in row below the 2007 data and then have the other tables in the workbook automatically update to reflect this new data and show
year|weight|length
2008|29|110
View 11 Replies
ADVERTISEMENT
Jan 7, 2014
I am trying to set up a spreadsheet to record business costs, I have a column [A] and [B] with start times and finish times respectively. [C] is the shift length say 10 hours but I always get an error if its a night shift as the start time is invariably later than the finish time. Is there a way around this without inputting the dates into the cells as I am trying to not duplicate data entry.
View 2 Replies
View Related
Nov 16, 2013
I have been trying to produce a spreadsheet that works out the correct gear and rpm depending on shift limits across six gears.
In column M I have all of the rpm values for 1st gear, which I require in column S until the shift limit for 1st gear is reached, now I wish to have the rpm values for 2nd gear (Obtained now from column N) displayed in column S up until the 2nd gear rpm limit is reached and so forth until 6th gear. I have tried an IF() statement down the entirety of column S but this only seems good for taking into account two columns at a time, whereas I require six all dependent on the respective gear shift rpm. Also the position of the shift rpm will change relative to other functions in the spreadsheet, so I can't simply have different IF() statements lined up appropriatly in column S.
So if my shift rpms are in column B I wish column S to read column M until M>B1 then it will need to choose values from column N until N>b2 where it then picks column o and so on.
View 6 Replies
View Related
Jan 23, 2013
I know it is possible to link multiple worksheets within the same file together but is it possible to link multiple files to report up certain information to a separate file that summarized the data onto one spreadsheet? If so, what would a sample formula be?
View 6 Replies
View Related
Jul 15, 2014
I'm trying to tweak this code from a previous form I created but I'm getting a compile error message. On my old form...the first box was a combo list box where the person entering data would select a value. On the new form, its a text box where the person will enter the value. I thought I could just change the me.cbo[name].listindex to me.tbo[name].listindex - but that seems to be causing the issue. I'm not sure what I would put after the me.tbo[name]. to get the code to run...
Code:
Private Sub cmdAdd_Click()Dim lRow As LongDim lPart As LongDim ws As WorksheetSet ws = Worksheets("DataNEW")'find first empty row in databaselRow = ws.Cells(Rows.Count, 1) _ .End(xlUp).Offset(1, 0).RowlPart = Me.tboProdCode.ListIndex
View 8 Replies
View Related
Dec 3, 2013
I am trying to attempt to create a payroll spreadsheet with certain aspects and with multiple worksheets. so what im trying to accomplish is this
1/ on my main worksheet would have the payroll template there would be 2 columns (1) would be "routes" (2) would be the dollar value of that route.
2/ i want to be able to pick from a drop down list in colume (1) which will have various routes such as A,
B, C, D, E etc
3/ once i have selected a route in colum (1) i want to have the dollar value that is associated to that route to show up in column (2)
ex/ route A worth $1
route B worth $2
create a dropdown list but thats about it, i have not been able to link any values together.
View 11 Replies
View Related
May 25, 2007
I seek advice on using the value of NOW() as a record ID in an address book program. Question #1: Do Excel developers often use a record ID? Question #2: What record ID schemes are fequently employed besides date/time? I have decided to create an Excel address book as an exercise to increase my knowledge of VBA, and also as a useful application for work.
I realize that a record ID is not essential in Excel in the way that it is essential in Access, but I feel the need to have some unique ID associated with each address, so that I may have different worksheets, with data related to a given Contact, sort and manipulate it, if necessary, but have the record ID as a way to restore the relationship of rows to a given Contact, and also, as a handy way to examine the data in the date/time sequence in which it was entered. I have experimented with the following code, to assure myself that I can access the number returned by the NOW() function, manipulate it as a string, and format in various ways if necessary.
Dim n As Double
n = Now()
sn = Str(n)
p = InStr(sn, ".")
first = Left(sn, (p - 1))
l = Len(sn)
d = l - p
S = Mid(sn, (p + 1), d)....................
View 2 Replies
View Related
Mar 16, 2014
I am creating an asset management sheet. For the formula I am trying to work out there uses 3 fields : ID, start date, and end date.
What I want to do is be able to show if the ID is duplicated within another record with an overlapping date. So an item is flagged if it is in the list within the same dates as another record. I tried a few countif formulas but with no success.. I may just be approaching the problem incorrectly though.
View 1 Replies
View Related
May 26, 2009
I am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
View 6 Replies
View Related
Mar 20, 2009
I'm trying to find a macro that will run allowing the user to select a 'starting record number' and a 'finishing record number' when printing.
I have a spreadsheet that feeds from a master list in excel, from over 5000 records.
I need to print the s'sheet with any given indivdual record's information at any given time.
Individual prints are fine. However if I wanted to print from record number 1500 to record number 3000 it would take me all day.
Is there a way I can set up a macro so an option form pops up? allowing selection of "From record" and "to Record" ?
View 13 Replies
View Related
Jan 6, 2007
Im trying to record a macro that will enter a formula in a cell each time I run the macro
Drop the Lowest2:
=IF(ISERROR(AVERAGE((SUM(C5:L5)-MIN(C5:L5)-SMALL(C5:L5,2))/(COUNT(C5:L5)-2))*Scale!$B$2*10),(IF(ISERROR(AVERAGE(C5:L5)*Scale!$B$2*10),"",AVERAGE(C5:L5)*Scale!$B$2*10)),AVERA GE((SUM(C5:L5)-MIN(C5:L5)-SMALL(C5:L5,2))/(COUNT(C5:L5)-2))*Scale!$B$2*10)
Drop Lowest1:
=IF(ISERROR(AVERAGE((SUM(C5:L5)-SMALL(C5:L5,1))/(COUNT(C5:L5)-1))*Scale!$B$2*10),(IF(ISERROR(AVERAGE(C5:L5)*Scale!$B$2*10),"",AVERAGE(C5:L5)*Scale!$B$2*10)),AVERA GE((SUM(C5:L5)-SMALL(C5:L5,1))/(COUNT(C5:L5)-1))*Scale!$B$2*10)
I know I can write the formula in a simpler way, but I was asked to make it like this.
The problem is that when I enter the formula in the cell while recording. I got a message: "Unable to record" so this part can't be recorded
View 14 Replies
View Related
Sep 1, 2009
This problem seemed to revolve around "digital signing" with further macro changes done from a different machine (without the proper certificate). Excel warns of the problem and then "unsigns" the project.
I've got a problem with spreadsheets that I've been working on. Now, when I tell it to record a macro, I get the macro name, shortcut assignment dialog box and then an error "Unable to record." After "Ok"ing that dialog box, the normal recording macro dialog comes up. Also, lo and behold, there will not be a macro recorded.
I've got no protected cells or sheets and it doesn't matter what security level is set. It is a "signed" macro but I can take off the signature and still have the problem. I checked for "Help - About" for deactivated modules and there was none.
View 2 Replies
View Related
Jan 23, 2012
Workbook 1 has 2 spreadsheets. Spreadsheet 1 contains Item and Pass/Fail Columns. under the item column is the serial number of the item tested. the Pass/fail column has the serial number duplicated if it failed tested. what is the formula is to have spreadsheet 2 pick the items from the pass/fail column on spreadsheet 1?
View 4 Replies
View Related
Jan 4, 2010
I have attached a document paralleling a document I am working on. The dollar amount in each spreadsheet represent sales. I have entered in values into the candy, soda, and chips spreadsheet. I have also linked values for candy into the total spreadsheet. My question is can I somehow type something or drag the formula down to populate the other cells in the total spreadsheet?
The idea I am thinking but which I don't know how to implement is to list all the items (as in column G) and list all of the relevant cells (e.g. B1 in the Candy spreadsheet) as in columns H and I (Note that all items will have the same cells but the cells will have different values...e.g. all three items have a cell B1 and B2 in their spreadsheet but these cells contain different values). I then try and fail to create a formula in cell B3 of the Total spreadsheet. I am trying to create a formula of the following nature:
='(Spreadsheet Name From Column G)'!(Cell Name From Columns H and I)
The Second half of the formula doesn't really concern me (i.e. the cell name from column H and I). However I am perplexed as to how to achieve the goal in the first parentheses above.
View 4 Replies
View Related
Aug 11, 2013
I have two spreadsheets, one gives me the beginning and end of civil twilight as a measure of day vs. night. The spreadsheet has Date/Time in the first column, and the value 45 in the 2nd column when it is night. The second spreadsheet has also 2 columns with date/time and body temperatures of a squirrel. I want to get basic statistics (mean and standard deviation) of the squirrel's nocturnal body temperature, that is for times when it is night (value 45). The tricky part is that Date/Time of both spreadsheets are different. The procedure has to recognize that the date/time of body temperature lies between the beginning and end of the value 45 blocks of the first spreadsheet.
files: twilight sheet squirrel temperature
View 6 Replies
View Related
Jun 26, 2008
I have a spreadsheet that I have a lot of macros that are attached to a customized toolbar saved in the same spreadsheet. I saved this is a read-only file. When I open as read-only and run my macros (testing), I save it as another file. When I then open the "template" to do the same thing, the toolbar/buttons now reference the file I previously saved as something else. Help please? Is there a macro that would delete all macros before saving the file as something else?
View 9 Replies
View Related
Feb 6, 2009
Often I need to add data from one spreadsheet to the appropriate places on another spreadsheet. For example:
Sheet A has 10,000 records with these fields: id#, name, address, place of employment.
Sheet B has 5,000 records these fields: id#, GPA, college major, type of degree.
Some of the records in B contain information for the same id#'s as sheet A. I want to add this information together so that a Sheet C will have these fields: id#, name, address, place of employment, GPA, college major, type of degree.
View 3 Replies
View Related
Jan 13, 2010
I have noticed that the basic problem I have is a common one on this forum with different varibles for different people. I have attached a dummy copy of the spreadsheet that I am using.
I need to copy cell information for one spreadsheet to one of 2 other spreadsheets depending on a dropbox condition. The master spreadsheet is the Issues spreadsheet, and depending on whether the user chooses Transferred Complaints or Transferred Offences (in Column K) I need to transfer certain cells to the Complaints or Offences spreadsheets.
The information I need to transfer from Issues is: .....
View 13 Replies
View Related
Apr 7, 2014
I have 2 sheets in my excel spreadsheet. One tracks data for a number of projects five different employees are working on. The other sheet is where I want to total up the number of minutes each employee has worked on their individual projects. I tried writing an IF statement like below but I am only getting the total in the first field even if the employee's name is not Employee 1....
[Code] .....
How I can write this so their totals show up in the correct row?
View 3 Replies
View Related
Mar 11, 2012
I have a Main Customer Spreadsheet. I want to Auto Populate FROM the Main Customer Spreadsheet to a New Spreadsheet. I want to be able to key in a customer name on the New Spreadsheet and take the info for that customer from the MAIN Spreadsheet and fill in the blanks. I need to be able to do this several times a day.
View 3 Replies
View Related
Apr 14, 2007
It also renames the CommanBarPopop with the new filename.This allows the user to open both Projectworkbooks/files (If required) and load each CommandBarPopup for different filenames .Therefor opening the Userforms and worksheets for the CommandBarPopup clicked ...
View 9 Replies
View Related
Apr 2, 2014
Wondering if there is an easy way to compare 2 spreadsheets that should have identical data on them? The first spreadsheet (Before) has the output data from 'before' a code fix was applied. The second spreadsheet (After) has the output data from 'after' a code fix was applied. The spreadsheets have 7 columns of data and almost 500 rows.
I've already copied the data from the source datasets provided by my IT folks into Notepad (.txt) files and then used Excel to open them as fixed width spreadsheets. I have 1 workbook with 1 spreadsheet with 'before' data. And, I have 1 workbook with 1 spreadsheet 'after' data. And, I have another workbook that contains both worksheets. So, I'm ready to go whenever I get hints of what to do next. :-)
I need to be able to show my client that we did not impact the data with the code fix that was applied. I want to be able to show my client contacts (business folks) an end result via Excel that confirms that I actually compared the 2 sheets and there were no differences. In other words....I can't just show them a formula with '0' as it end result (even tho that's basically what I'm trying to prove).
View 6 Replies
View Related
Apr 24, 2006
I need to write a macro that will import data contained in another spreadsheet, but am unsure how to do this. I have several (about 15) spreadsheets that contain data. I need to import key bits of this data into one central spreadsheet that will be used for reporting purposes. I only need 2 cells worth (values) from each source spreadsheet, to be pasted into the destination spreadsheet, into designated cells.
The source spreadsheets are usually closed down and kept on a file server, which my PC has access to. Ideally I want to activate this macro with a control button - i.e. I press the button once and the macro goes off and collects/updates each field with the latest data stored in each of the source spreadsheets.
View 7 Replies
View Related
Dec 14, 2008
Is it possible to add a row between every record, that has different data for 2 columns ( compared to the row below )
View 14 Replies
View Related
Nov 4, 2009
I am building a form that uses a combo box to lookup up a row in a table and return row data. To make things more complicated I want to return more than one record. For example: the table has a list of jersey. I search for a style jersey. I want to search the list and return all the colours for the chosen style. Sometimes there is only one colour or there can be up to 10. Have a look a the attached example.
View 2 Replies
View Related
Jul 10, 2013
How to group different record and name the group. Attached file
View 14 Replies
View Related
Jun 25, 2014
l would like to record a macro that allows one finds a 'key word' in sheet 1 ,then the macro should copy the entire raw of the search results to worksheet 2 .The macro should enable the user to have as many searches as possible but pasting all the results on one worksheet.
View 2 Replies
View Related
Apr 22, 2010
I have designed a website for my uncles business and I have used numerous forms in vba. One of the things he wants me to do is display a list of some of the client details on a new work sheet and I have hit the wall..
I have about 6 worksheets,
The ones i need to access in this instance will be clients.xlsm and the temporary one i have created each time the form is run called temporary.xlsm
I need to search for a particualr client number in row A on the client list and return column number 2 and 3. Usually i would use the match or vlookup function but row A contains the client number numerious times.
However, (this is where I am stuck)
there are multiple client id's in row A. For example the client ID i am searching will exist say 3 - 6 times in row A and i always want to return the row number in a new cell on the temporary page each time it has found it.
I am searching for the client id in worksheet("clients").range("a:a")the client id is repeated and I want to return all the rows if there is a match, but match will only return one row...
would it be a for loop with a match function? -
when I find a match i want to be able to record some of those values on the same row it has found a match on the temporary worksheet
View 9 Replies
View Related
Jul 23, 2009
In some cases an Access DB query will return only one record (by design). When this happens, and only when this happens, my listbox displays each of the values in a seperate row instead of just on one row.
i.e. My query will return 8 values per record. If there is only 1 record returned, the listbox shows each value on a seperate row instead of on one row in 8 columns.
The listbox works as intended when there are 2 or more records. I am now stuck. Pardon the ugly code. "questionaires" is the name of the listbox. "record_array" is the variant array containing the records.
View 4 Replies
View Related
Sep 16, 2005
In sheet1 we have the data
DateTask name Remarks
9/15/2005IncomingOK
9/15/2005OutgoingOK
9/15/2005IncomingNot OK
9/16/2005OutgoingOK
9/16/2005OutgoingOK
9/16/2005IncomingOK
In sheet2 i need data for that particular date of that task only if it is OK
Eg: - on 15 - Sep it should 1 only one record in total if it is OK and task
is Incomig
On 16/sep it should be 2 outging and 1 incoming
View 9 Replies
View Related
