Paste Method When Compiling Data Into Master Worksheet
May 6, 2014
Here is my code thus far - it seems to go through the directory and copy data (single columns of 101 data-points) from the workbooks, but does not successfully paste it into the master-workbook (error message reads: 'paste method of worksheet class failed').
VB:
Sub LoopThroughDirectory()
Dim MyFile As String
Dim ecolumn
MyFile = Dir("C:Documents and SettingskbriemMy DocumentsErindi_i_vinnsluEXCELprufa1")
[Code] ....
View 3 Replies
ADVERTISEMENT
Mar 30, 2013
I have about 180 workbooks which I need to compile into a Master Schedule.
All the tab 1's are different, these feed into tab 2, which the data has the same formatting throughout. The 2nd tab has the same data for A:F 1 but cells A:2 - F:2 down to row 9 are populated from tab 1, therefore different in each. I am trying to get a Master schedule that lifts the data in the fed cells into a line by line spreadsheet?
Is there a way I can get excel to look at a folder, then every workbook in it, the at the 2nd tab in every workbook, then list the cells as described above? I am not after a consolidation of this data, but a full list?
View 1 Replies
View Related
May 13, 2014
I have 3 different sheets with data that I want to combine into one sheet using a formula. Here is an example:
Sheet A
Date Amount
10/1 $5
10/2 $10
10/7 $5
Sheet B
Date Amount
10/2 $7
10/3 $10
Sheet C
Date Amount
10/5 $5
10/6 $10
I want a fourth sheet that fills with all the data from these three sheets. Ideally it would be in order by date, but I understand that might not be possible. So the last sheet should look like this:
Date Amount
10/1 $5
10/2 $10
10/2 $7
10/3 $10
10/5 $5
10/6 $10
10/7 $5
The reason I want to use a formula of some sort is because if I add more rows to sheet A for example, I want the fourth sheet to automatically add it (whether it's possible to do in date order or not).
View 2 Replies
View Related
May 26, 2013
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies
View Related
Sep 10, 2007
attached is the template that im working on right now. the worksheet which is named as "1" has a command button when clicked on it would create another worksheet named as "2", now i need to collate the information in to a master sheet which i have named as "daily report". All im in need is to copy data from every worksheet and post the same in the daily report using a Macro code.
iam able to do the same using the following for one row (1.1 to 1.5) of values which repeats only once for the first worksheet and doesnt repeat next time for worksheet 2 and so on. I want to have the values for 1 to 10 in the daily report. Can someone help me?[/color]
View 9 Replies
View Related
Aug 21, 2014
I have an application I just built last week that seemed to be working fine. It's purpose is simple. It allows the user to select multiple .rtf files from a network drive, and then it loops through them, opens them up one at a time, copies the entire contents into a "temp" sheet in the excel workbook, then copies certain data from the temp tab to the next two columns in the main "data" tab of the worksheet, deletes the temp sheet, and then repeats the process for each selected .rtf file. Finally , it does some formatting of the "data" tab. All in all, it works quite well. Or at least, it DID.
VB:
Sub CopyRTFDocToTemp()
Dim WordApp As Object
Set WordApp = CreateObject("Word.Application")
With WordApp
[Code] .....
As of last night, we started getting various errors.
"Run-time error '1004': Paste Method of Worksheet class failed" error messages occasionally. The frequency seems to have increased.
We were also getting an error message that reads "Microsoft Excel is waiting for another application to complete an OLE action" error messages.
Then when I stepped through the code, I was getting an error message that read [filename I'm trying to open] "is locked for editing by" [me]. "Do you want to Open a Read Only copy, Create a local copy and merge your changes later, or Receive notification when the original copy is available"
I suspected two issues
1. The macro is not successfully opening the source file before it tries to copy it, so there is nothing to paste into Excel
2. The word file was not closed the LAST time I ran the app, so the file is getting stuck open, and I have no way to manually close it.
Finally, I rebooted the PC, and added code (activedocument.close) to close the word app after copying the contents of the rtf file
VB:
Sub CopyRTFDocToTemp()
Dim WordApp As Object
Set WordApp = CreateObject("Word.Application")
With WordApp
[Code] ....
I'm considering adding a wait loop to ensure that the app has actually opened a copy of the rtf file, so it has something to copy, but I'm unsure what variable to check with that loop.
View 2 Replies
View Related
Jan 29, 2009
My spreadsheet has a grouped graphic that I need to repeat in a variable number of rows. I wrote a macro that copies the grouped graphic from above and pastes and positions it in the newly inserted row.
It works great when I use F8 to step thru, but if I try to actually run the macro, I get an "Paste Method of worksheet class failed." error.
Sub InsertEmployees()
Range("B18").Select
Selection.EntireRow.Copy
Selection.EntireRow.Insert Shift:=xlDown
ActiveSheet.Shapes("Group 129").Copy
Application.CutCopyMode = False
ActiveSheet.Paste
End Sub
View 9 Replies
View Related
Sep 30, 2006
I am working on a file which is a log of all the requests we send out to our vendors. We regularly need to re-send these requests to remind them they haven't responded yet, so I am working on a macro which takes the info from the log and re-populates the request form so everything doesn't have to be re-typed every time. I've added a MsgBox as a double-check to force people to confirm they want to re-send the request.
My problem is that if you hit "No" on the MsgBox, then try to run the code again, it gives me a Run-time Error 1004 saying "Paste method of Worksheet class failed". Can someone look at my code and see if you can tell me why it works the first time but not the second?
Sub RegenerateRequest()
If ActiveCell.Column = 1 And ActiveCell.Row > 7 Then
Application.Run "LogUnprotect"
ActiveCell.EntireRow.Copy
Sheets("Regenerate Request").Activate
Application.Run "RegenFormUnprotect"
Range("A40").Select
ActiveSheet.Paste 'this is the line the debugger highlights.............
View 3 Replies
View Related
Jul 31, 2007
I am trying to filter and copy from masterlist to wholesalecertified. The data is actually pasted to WholesaleCertified, however, I got error 1004.
Sub Refresh()
With Application
.ScreenUpdating = False
.DisplayAlerts = False
Sheets("WholesaleCertified").Select
Cells.Select
Selection.ClearContents
Sheets("MasterList").Select................
View 9 Replies
View Related
Jun 6, 2005
Very new to VBA and having trouble with a simple macro running in 2003 that copies and pasts to another worksheet. Code as follows:
Private Sub CopyResults_Click()
'Select the filtered data and copy it
Range("A23").Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Range("F19").Select
' Open the template and copy in the data
Workbooks.Open Filename:="C:Athens Verification DataTemplatesVerification Template.xls"
Workbooks("Verification Template.xls").Activate
ActiveSheet.Range("A1").Select
ActiveSheet.Paste
ActiveSheet.Range("A1").Select
Application.CutCopyMode = False
End Sub
When I run CopyResults, the sheet is opened and the data copied correctly, but I get a runtime error 1004 past method of worksheet class failed, with the line 'ActiveSheet.Paste' highlighted. Don't get this when I run the same macro in 2000.
View 14 Replies
View Related
Apr 29, 2009
I have the following macro who now return a runtime error 1004, paste method of worksheet class failed.
I don't know how to change it to make it work.
Sub Paste_TOP()..
View 9 Replies
View Related
Jul 4, 2012
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
View 2 Replies
View Related
Apr 9, 2014
Each month I get a report that is formatted by the customers and this sheet never changes. The problem is that the master sheet my job uses is not formatted this way. The master workbook has several sheets that breaks down the data from the monthly sheet. Instead of having to enter the data manually I'm looking for a way to export the data from the monthly sheets into the master workbook. As I stated the sheets are all the same but come from different providers and all contain the same amount/style of data.
View 1 Replies
View Related
Oct 7, 2009
I receive a monthly download of individuals call-logs in one "Master File." For internal reasons, I need to separate every person's monthly call-log into individual worksheets. Unfortunately, the file is very large and copy/paste is very time consuming. I am operating on MS Excel 2007.
View 9 Replies
View Related
Nov 7, 2006
I'm trying to consolidate data from many worksheet to a master worksheet. So far, thanks to the help of some experts, i've got this code. But i need to tweak it further to suit my requirements.
Sub CopyDataToConsol()
Dim Sht1 As Worksheet
Dim Sht2 As Worksheet
Dim SrcRg As Range
How can i tweak the above code to:
1) copy the lastest updated row to the Master sheet, instead of copying the whole set of data over and over again..
2) automate it by using worksheet change?
View 9 Replies
View Related
May 25, 2009
I had to copy data from child woekbooks (*.xls) and paste it to the master workbook with same page to page every time when a macro is executed i had done the copy and paste part
But I'm Facing the problem in which i had to deal with
Validations as on both master and child sheet validation (column based combo box is activated )
one is worktype
2ns is time type
i jst had to copy data to the master macro works perfectly fine but the problem is that a msg box appears which signifies that i had to change the name (version ) for both types when i click yes 2 times it pastes the data
I'm attaching my macro as well as pic of that msg box with this attachment
View 6 Replies
View Related
Apr 29, 2014
I get 'x' number of workbooks(with one sheet only) everyweek from which I need to copy data and paste to a master worksheet. (SCREEN CAPTURE BELOW)
I am unable to write the code myself as I have never worked on VBA and am only a beginner.
Part I:
The data I need to copy starts from the 19th row (A19:H19). The end point is determined by the row just before the row that has the words "Calibration Request" in it.
Part II:
Just below the data that was pasted from Part I, the data from 2 rows below the words "Calibration Request" needs to be pasted. The end point for this would be a blank row encounter.
Also some of the rows and columns are merged.
View 9 Replies
View Related
Aug 1, 2014
I have several workbooks (5) with the same variables (columns- A:Q) but with a changing amount of rows (2:n, not including the headers). Each row corresponds to a date range (usually a week) for a particular person (up to 40 people) plus a few other values.
I would like to have a way of "merging" or "compiling" the 5 "seed" workbooks into 1 "master" worksheet. Where rows 2:n of each of the 5 "seed" workbooks are added to the master without any duplication of the same name-date range combination. Also, the master worksheet should not include the rows which only contain a name and date range but for which all the other variables are zero or missing.
Each "seed" workbook would have a button that sends the data over to the "master" worksheet.
Is this a really difficult project? Feasible for someone with near to zero VBA experience?
I attached 3 files to show you what I mean. The 2 "seed" files are merged into the "master" file. Please note that in the files only 2 names are used, but the "seed" files could contain any combination of 40 some names. Also note that the length of rows which contains data in the "seed" files is variable, although it should not be longer than 16 rows + the header row.
View 14 Replies
View Related
Jun 17, 2014
i have a worksheet that has information filled in columns A-N and rows 3-7262 (not including title and labels)
i need a macros that will separate this data into multiple worksheets based on the word in Column A; these words could be HDA, CCR/NHT, GRU/ATU (essentially dividing this data up by area name, there will be 14 worksheets)
i would also like to be able to update this master worksheet and have it be reflected in the multiple worksheets that are divided by their areas.
View 5 Replies
View Related
Oct 9, 2012
I have a large data ... my problem is that I want the data is segregated automatically without manual filtering. in my data there are approximately 1000 individual name data, i need information about one person automatically segregated in one worksheet
A
B
C
D
[Code]....
for example; in the table we can see the red colour font in column D, that is the name person, what i want is data for one person automatically transfer to another sheet..example : Annamalai data to Sheet2, Koh Che Kuan to Sheet 3, Rashidah to Sheet 4..etc
View 3 Replies
View Related
Feb 21, 2014
I've a workbook with two sheets 1)'weekly' and 2)'summary.'
Weekly is divided into products (up to a maximum of 8) with a fixed number of columns (4) directly below but a varying number of rows beneath as follows:
Product A (main header)
Issue|Serial Number|Analysis|Comments
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data
--couple of blank rows--
Product B
Issue|Serial Number|Analysis|Comments
data|data|data|data
data|data|data|data
data|data|data|data
--couple of blank rows--
Product C
Issue|Serial Number|Analysis|Comments
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data
..etc...
This weekly data must be appended into each product's respective grouping within the 'Summary' tab. With the following small additions: 2 additional columns filled with the model and current week must be inserted beforehand:
Product C
Model|week|Issue|Serial Number|Analysis|Comments
Product C|7|data|data|data|data
Product C|7|data|data|data|data
Product C|7|data|data|data|data
Product C|7|data|data|data|data
Product C|7|data|data|data|data
Product C|7|data|data|data|data
Summary page will contain the groupings of Product A through H. The weekly may only contain 1 (say Product D) in any given week, or all 8.
I realize there are more efficient ways of doing this, i.e. pivot tables, creating discrete tabs for each product, etc... but I've been tasked by the higher-ups to generate the above as I've laid out.
View 7 Replies
View Related
Jun 22, 2009
I have a workbook with multiple worksheets. Each worksheet is a set o data from a certain year. I want to create a macro that automatically copies the data from these worksheets into a master worksheet that can easily be used to make a pivot table.
View 3 Replies
View Related
Jul 29, 2008
I have tweaked this code in order to accomplish my requirement. I have in all 35 worksheets in a workbook. Out of 35 sheets, 31 worksheets are infact the 31 days of the month starting from 1st July to 31st July. What I want to do is copy and append all the rows in column A (starting from row 2) of all these 31 worksheets into one master worksheet. Basically, appending the rows in col A from all the worksheets together in master worksheet.
Sub append_master_sheet()
Dim wAppend As Worksheet, wSheet As Worksheet
Dim LastRow As Long
Set wAppend = Worksheets("Master")
For Each wSheet In Worksheets
If wSheet.Name wAppend.Name Then
LastRow = wAppend.Cells.Find(What:="*", After:=wAppend.Range("A2"), _
SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
wSheet.UsedRange.Copy Destination:=wAppend.Cells(LastRow, 1)
End If
Next wSheet
End Sub
This code when run gives me a Debug error "Object variable or with block variable not set". I did a research for this error on Google and most of the answers are in reference to using ADO Recordsets. I am not even distinctly using a Recordset in this example.
View 9 Replies
View Related
Mar 6, 2014
My query is;
I have 2 different worksheets having similar format (header rows/columns) but different data (values). I need to pull out these data based on their values, means if cell is blank leave that cell and move on, but if cell has some value then pull that value with its corresponding row & column headers to place into a simple table to further use it for PivotTable. The number of rows and columns are equal in both worksheets.
So basically, the proposed function will run a check on both worksheets within a specific range of cells for their values and if not blank, it will fetch that cell value along with its relevant row header and column header and place all these attributes into the destination worksheet.
Hope I am quite clear with my query. with the required function to ease my life?
View 4 Replies
View Related
Mar 14, 2014
I have to input information into a master worksheet which contains data (employee names, location, start date and client) that then needs to be repeated in several other sheets. I want to input the data into a master worksheet and then automatically populate the other sheets with the data. If the data could then be filterable on each sheet that would be good.
View 9 Replies
View Related
Sep 11, 2006
I am searching for a formula or simple macro to select text data from column named "SM NAME" to corresponding worksheet. I need this to populate as many worksheets as there are SM Names. ( there are usually 10 SMs)
For Example in the Master Data there are Several SM names listed. I need to extract the "ID" and "Agent" columns in the Master and populate into the workshhet with the Approriate name tab. The Master list changes regularly.
View 4 Replies
View Related
May 11, 2009
I have never really used VBA and so am completely stuck at this problem. I need to create a macro which auto-populates a master worksheet from the individual user sheets in a shared workbook. Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff. Each worksheet will be identical, using columns A-I with row 1 having the headings:
Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell). There will be a varying number of rows in each of the individual sheets. If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.
View 5 Replies
View Related
Mar 8, 2006
I have 5 sheets in 1 wookbook with about 15 columns of varying rows of data. What I need to do is create a macro which collates all the rows of data, which with their own heading, onto 1 sheet so that it can be printed and distributed.
The problem is of course is that normal copy and paste won't work because the rows may vary and the macro need to take that into consideration. I guess probably an 'If not or' type command that would copy and paste the row so long as it had values then move onto the next sheet and continue from the last one.
View 9 Replies
View Related
Sep 3, 2013
I've been asked to compile and sum weekly sales data. The problem is that the data was supplied in 52 separate tabs, for each week of the year (I don't know who on earth thought that would be the most appropriate way to send the data).
Is there any quick way to import all the data from each tab into one worksheet? The data is laid out the exact same way on each tab. All the row and column headings are the same, and in the same cells. Only the numbers are different (obviously).
View 2 Replies
View Related
Oct 25, 2009
I have a large amount of data that I need to be able to summarize certain fields in order to be able to work with the data.
What I have is multiple lines which all pertain to one record and I need to be able to summarize these into one line - which would give me a sum in certain columns. I am working with thousands of lines of data.
There is about 10 columns in the worksheet. I want to be able to tell Excel that if certain columns all match, then to summarize these lines and give me a sum total on a couple of other columns. The data I am working with is invoice data, so I want to know if certain columns - ie - Vendor name, invoice number, cheque number are the same in each row, then to sum these records and provide a total for the invoice amount and cheque amount columns.
This sounds like a complex function to me but I am hoping that someone has a solution for me.
View 10 Replies
View Related
