How do I get my number in one cell to show all possible combinations of it in other cells. (e.g. cell B4 = 123, now i need cells C4:H4 to display all 6 combinations of the number as follows: 123, 132, 213, 231, 312, 321). Attached is a sample file.
View 3 RepliesI have two columns - A and B. In column A there are blank cells and filled cells. There is a blank cell and after it - a variable number of filled cells, then a blank cell again and a variable number of filled cells. I am trying to concatenate the filled cells from column A into a single cell in column B, which is corresponding to the blank cell in column A. Values should be comma delimited.
For example: A2-blank; A3-27; A4-63; A5-blank; A6-31; A7-blank .. and in column B should be B2-27,63; B3-blank;B4-blank; B5-31,B6-blanc and etc.
Example is in the attch: Book11.xls. This formula works but if there is no number 4 then I don't want comma after 1, or 2, or 3, How avoid it:
results
1,2,3,4
1,2,
1,2,3,
3,4
1,
4
2,3,
(red , need to be removed)
I have a sheet where some data is entered in A1 to C1 and i use concatenate to string them together. The problem is in cell C1, where I used cell format to customize the number of zeros in front of the number.
EG:
A1: Photos
B1: 2013
C1: 00001
the concatenate result is Photos2013\1, instead of the desired result of Photos2013\0001.
Sampling table :
one
two
three
four
one
two
three
one
two
one
Desired results obtained via IF =IF(B2>0,A2&" , ",A2)&IF(C2>0,B2&" , ",B2)&IF(D2>0,C2&" , ",C2)&IF(D2>0,D2,"")
one , two , three , four
one , two , three
one , two
one
Is there any smarter, shorter formula via Concatenate and Substitute or other formulas ?
My closest match, but not good enaugh is =SUBSTITUTE(CONCATENATE(A2&", "&B2&", "&C2&", "&D2), ", , ", " ")
[ returna 2 commad ]
one, two, three, four
one, two, three,
one, two
one ,
I have one row per day of the month in column A. each row has one or more cell entries in column B .... to column (variable) Right now I use a formula =concatenate(B2,CHAR(10),C2,CHAR(10),D2.....) for as long as it has to be, but this has its limits and requires a lot of editing as the number of filled cells for each row vary.
would it be possible with some macro code to manage the variable number of cells and then insert verything, wrapped text, in a single cell (can be cell Bx or a cell in a new column added next to the dates column) As soon as everything is in the single cell, the original data cells can be emtied. I can record a macro but that does not allow me to manage the variable number of cells . a small sample file attached.
I need to do a vlookup with the array starting on a row determined in another cell, so I've tried concatenating the number into a formula but this doesn't seem to work. Is there something else that I can do?
E2 is 134
=CONCATENATE("=VLOOKUP($B2,$C$", E2+1, ":$F$2571,3,FALSE)")
returns: =VLOOKUP($B2,!$C$135:$F$2571,3,FALSE) but not as a formula, as text and I need the formula...
I need VBA that will make those two columns:
1 A
1 B
2 C
2 D
2 E
2 F
2 G
3 H
3 I
3 J
into those two columns:
1 A,B
2 C,D,E,F,G
3 H,I,J
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
I need to cocatenate anything between and including column 4 and col (unkown until macro is run)
is there a way to do this?
Basically need to add all the cells from 4th column to whatever col is. Example if col = 12
then I need columns 4 to 11 all rows together
what i am trying to do is use concatenate in a vlookup to search for a resource number and date, then return another column in the array.
the formula looks like:
=VLOOKUP(CONCATENATE(D7,$H$6),Roster_Allocation,7,FALSE)
but only results in NA.
if i search for the resource number only, i get the correct result.
also, the res# and date are concatenated in the table array. could this be related to the way excel is storing the dates (40241?) even though both concatenated fields look the same?
i have also tried adding a new coumn which has the res# and dates concatenated as the lookup value but still all NA.
Create some sort of formula combination or macro that will: Recognise a cell with a value of 1, 2 or 3 in. If 3 is in the cell, the cell to its left will be counted and added to a total. If the cell that has 3 in changes the value is removed from the total. Ive tried lots of methods but i cant figure this one out!
View 6 Replies View RelatedI have a data set that shows numbers for categories over time. I would like to add the data label to the numeric value and then sort the data by the original number. Is this possible?
Here's an example
A 1 2 3 4
B 5 7 4 1
C 8 0 2 1
D 3 4 9 5
I would like each column sorted independently based on the data in that column, but I want the results to have the label from column 1 concatenated with the value in the other columns such as this:
A1 C0 C2 B1
D3 A2 A3 C1
B5 D4 B4 A4
C8 B7 D9 D5
Each column is sorted by the numeric value, but has the name label from column 1 attached to it.
I have multiple rows within a cell separated by Alt+Enter, and would like to combine them as follows:
Desired Result
First
First
Name
Name
First Name
First Name
I would like to get number of cells since the cell value exceeded a given number in a given range of numbers.
example
cell address cell value
a1 1
a2 1.9
a3 -1.2
a4 4
a5 3
I would like to know number of cells since value was less than 1 : the answer is 3 (a5,a4,a3)
Number of cells since number has exceeded 3: the answer is 2 cells back ie a5,a4
I'm having a rather difficult time getting this one.
I am concatenating (is that a verb?) a bunch of cells to create an item code.
The combination of two different cells need to be able to give different values so I can dump the appropriate value into the CONCATENATE formula.
A picture is worth a thousand..
On tab 2 of a spreadsheet, I am trying to concatenate several cells on tab one! Everything comes together in the cell on tab 2, however it does not hold the date format. It turns it into general text so just random numbers that do not even tie to the date. Any way to lock the date format for this idea?
View 7 Replies View RelatedI have 7 consecutive cells which contain a %
e.g. A1 120%, B1 35% etc
I am trying to put them into one cell using concatenate
but am getting 1.20.3529411764705880.705882352941177
I would also like to separate them by comma,
I concatenate value of the several cells at one. (A1&"/"B1&"/"&C1 and etc. The length of characters may be different and I want it be looking neat by adding spaces. Something like that:
400/ 25/ 30
40/250/300
I've been trying to use IF OR and CONCATENATE to read 4 cells and give me a list of parts needed based on the data loaded in the 4 cells. I attached an example showing.
View 2 Replies View RelatedI know how to do the "normal" type of concatenation (concatenating?), but I was wondering if there was a way to concatenate a range of cells.
If my first three cells look like this:
A1 = Adam
A2 = Bob
A3 = Chris
I'd like cell A4 to say "AdamBobChris". I'm not worried about punctuation at this point. I thought I could just do =concatenante(A1:A3), but that's not working.
I have a Requirement where we need to concatenate the cells based on conditions
i have the attachment for the reference . please download the file from the link.
I have data in cells A1:A50. I want to combine all of them into cell A51. I know that I can achieve that by using =concatenate(A1,A2,A3,A4,........,A50) or =A1&A2&A3&A4&......&A50 but it would be very tiring to click on each cell. Just imagine if the data in cells A1:A1000? function that work like say =combine(A1:A50).
View 2 Replies View RelatedI cant quite get this, I have 4 cells in one row (a selection and can be any row), I need to string the values together and add some simple text.
Example:
Assume row 1 and columns A, B, C, D.
496 | 6d7 | Minor | Ø.375 +/-.010
What I need this to read as one long string:
#496, 6d7, Minor, Ø.375 +/-.010
Adding the text in Red.
Column A may be a single digit or up to 10 digits in length. Once the string is configured I want to copy it and manually paste in another application. If the string is placed any where else in the worksheet for formatting, it can be deleted after the copy/paste or macro end.
I'm trying to concatenate a few cells but seem to be missing the mark with my code. show me where I went wrong.
Code:
Dim counter As Long
Dim b As Range
Dim e As Range
Dim g As Range
Range("E1").Select 'Set the range for the loop
Selection.End(xlDown).Select
[code]....
I have the following formula in cell N4:
=CONCATENATE(O4,CHAR(10),"EBC Briefing: "&TEXT(P4,"dd-mmm-yy"),CHAR(10),"Site: ",Q4)
As long as 04:Q4 are ALL non-blank cells, the formula works. However, if ANY of the cells are blank, it displays the green rectangle in N4, but it doesn't offer the Trace option.
I have a macro to concatenate multiple cells but unfortunately it is not giving the result,
It has to concatenate below mentioned cells and put the result in column N
Sub ConcatColumns()
Do While ActiveCell "" 'Loops until the active cell is blank.
'The "&" must have a space on both sides or it will be
'treated as a variable type of long integer.
Range("N1").Select
ActiveCell.FormulaR1C1 = _
"=CONCATENATE(RC[-10],RC[-9],RC[-8],RC[-7],RC[-6],RC[-5],RC[-1])& ActiveCell.Offset(0, 0)"
ActiveCell.Offset(1, 0).Select
Loop
End Sub
I have a spreadsheet of inventory items that I am trying to prepare to import into Quickbooks. There are items in this sheet that are subitems of a parent item. The subitems have the same ID number (col. C in the attached sample), different quantities and different descriptions than the parent.
I need to to concatenate the Item Lookup Code (col. D in example) and the description, separated by a colon. Then I need to copy everything else in the parent record, except quantity and description, into the child records. There are close to 20,000 items in this sheet.
I want agglutinate some text values in the same cell. Something like that:
A1="John"
A2="Elton"
A3="Mark"
A4="AND"
B1=A1+A2+A3 =(John Elton Mark)
B2= A1 +A4 +A2 + A4 +A3 = (John AND Elton AND Mark)
I am attempting to concatentate several cells (10 to be exact). I only want to include cells that are not blank in the output. I searched the topics and found a similar problem. I attempted to modify that solution to fit my needs but I obviously do not quite understand exactly how it worked. I have attached a sample. The expected results are that if in row 1
columns a through j have any value they will then be concatenated or joined in some other fashiion seperated by a comma. I only want to include non blank values. I have placed the code that I attemted to use in this post.
=IF( COUNTBLANK(GL41:GU44)=0,GL41&", "&GM41&", "&GN41&", "&GO41&", "&GP41&", "&GQ41&", "&GR41&", "&GS41&", ">41&", "&GU41,IF(ISBLANK(GU41),""&GL41,GL41&", "&GU41))
Some of these cells are merged as indicated in the range of countblank().