Concatenate Based On Column Number

Jun 6, 2007

I need to cocatenate anything between and including column 4 and col (unkown until macro is run)

is there a way to do this?

Basically need to add all the cells from 4th column to whatever col is. Example if col = 12

then I need columns 4 to 11 all rows together

View 9 Replies


ADVERTISEMENT

Concatenate Based On Text In Different Column

Mar 24, 2014

I am trying to get a complete list of applications per device. I have the device list but it is broken down into seperate lines so i would like some sort of formula (not fussed what type as long as it gets the desired results!) that will look in column A and if the text is the same, to concatenate the info in column b, separated by a comma. So for the first device (4d713006) i would get 1 cell that would have the list of all 52 applications in it separated by a formula. This is so i can vlookup the device name from another sheet and pull through all the list of applications.

I have attached the data : example.xlsx‎

View 3 Replies View Related

Concatenate Column Based On Condition?

Aug 13, 2013

I need a formula to be placed in cell Col A, Row 1, that concatenates any and all cells in Col A, with a ';' separating each item. I only want this concatenation performed ONLY IF an adjacent cell in Col B contains the letter 'X.

Additionally, if the cell in Col A is null, then I the formula to ignore it, and not perform the concatenation.

Is there a way to do this formulaically?

View 1 Replies View Related

Concatenate Multiple Rows In A Column Using Delimiter Based On Changing Value

Aug 16, 2013

I am attempting to concatenate the dept numbers for each user in a list. For example, the first user listed below is associated with 6 depts. I would like the resulting macro to concatenate the dept's into one cell next to the Name.

Below is an example with the solution I am attempting to produce.

Sample Table

Name
Dept

Abbruzzese,James L
188100

[Code] ......

Output

Name
Dept

Abbruzzese,James L
188100, 231100, 600377, 600656, 600663, 600708

Abdi,Salahadin
600607, 600670, 600878, 600879, 710432, 710432, 710435

View 2 Replies View Related

Concatenate Varying Numbers Of Cells Based On Duplicates Found In Separate Column

Jul 25, 2011

I need to concatenate varying numbers of cells based on duplicates found in a separate column, but I'm not sure how to approach it. I have 41,000+ rows of data, so I have to find a formula.

Example:

1AB2Denton, PaulFB357D4D3OwensTest, MarcyFB539F934Brennan,
JosephFB539F935Bowser, AmyFB539F936LaRock, ChuckFB667D3B

Based on duplicates in column B, I want to combine the data in column A into one cell. The duplicates in column B could be only 2, or could be 20+.

View 2 Replies View Related

Range Object/property: Calculates 2nd Column Based On 3rd Column's Number

Jun 1, 2009

I'm trying to write a code that calculates 2nd column based on 3rd column's number or vice versa based on the condition set on the 1st column. Below, there are two procedures. "SimpleCalc" and "SimpleCalc2". I first wrote SimpleCalc2, but it isn't working, so I worked around the error by writing SimpleCalc, which selects a cell and moves around by offset. I personally find it hard to read and error prone as I develop more logic around it.

I'm trying to develop more function based on this code, so I need to make it neat and flexible. what I'm doing wrong in SimpleCalc2? Or do you have any suggestion to improve the code "SimpleCalc"? I'm using Excel 2003.

Sub SimpleCalc()

Dim SimpleMethodRng, SimpleMethod As String, i As Integer

ActiveWorkbook.Worksheets("Dashboard").Range("P5").Select

SimpleMethodRng = ActiveWorkbook.Worksheets("Dashboard").Range("N5:P12")

For i = 1 To 8

SimpleMethod = SimpleMethodRng(i, 1).........

View 3 Replies View Related

Return Column Header Based On Column Criteria And Number Value

Feb 7, 2014

I have the following sample data set and I'm trying to return the appropriate column header based on criteria (i.e. DDD) and a number value which will be somewhere within the range of the table. In example below, the value returned should be Header 2 because the value is greater than those in Header 1 column (range H9 to L26).

Here's data table:

CriteriaHeader 1Header 2Header 3Header 4
ZZZ5.0015.0050.00130.00
ZZ5.0015.0050.00130.00
Z5.0015.0050.00130.00
YYY5.0015.0050.00130.00
YY5.0015.0050.00130.00
Y5.0015.0050.00130.00
DDD5.0015.0050.00130.00
DD5.0015.0025.0075.00
D5.0015.0020.0065.00
RRR5.0015.0015.0045.00
RR2.5010.0010.0030.00
R1.503.0010.0025.00
UUU0.751.505.0020.00
UU0.751.505.0020.00
U0.751.505.0020.00
P0.751.505.0020.00
T0.100.105.0018.00

CriteriaNumberValue
DDD10.00Header 1>>>=INDEX($I$9:$L$9,MATCH(I29,INDEX($I$10:$L$26,MATCH(H29,$H$10:$H$26),)))

View 3 Replies View Related

Concatenate The Number Into A Formula

Oct 14, 2008

I need to do a vlookup with the array starting on a row determined in another cell, so I've tried concatenating the number into a formula but this doesn't seem to work. Is there something else that I can do?

E2 is 134

=CONCATENATE("=VLOOKUP($B2,$C$", E2+1, ":$F$2571,3,FALSE)")

returns: =VLOOKUP($B2,!$C$135:$F$2571,3,FALSE) but not as a formula, as text and I need the formula...

View 3 Replies View Related

Concatenate Values With Same Number

Feb 6, 2010

I need VBA that will make those two columns:

1 A
1 B
2 C
2 D
2 E
2 F
2 G
3 H
3 I
3 J

into those two columns:

1 A,B
2 C,D,E,F,G
3 H,I,J

View 6 Replies View Related

Use Two Different Calculations Based On ID Number In Column

Jun 28, 2012

I have a list in Excel with several hundred 8 digit ID numbers in column D. Column C contains the total number of hours the student employee worked. Column E needs to calculate using two different equations depending on if the ID number in column D is a manager's. If the ID number is an employee the total hours worked is divided by 8. IF the ID number represents a manager the total hours worked is divided by 4. I've attempted this by using an array for the manager ID list and also using VLookup without success.

In essence I need to loop through column D, check which type of ID number is present, and then enter the correct formula in column E.

View 9 Replies View Related

Concatenate Variable Number Of Cells?

Sep 15, 2014

I have two columns - A and B. In column A there are blank cells and filled cells. There is a blank cell and after it - a variable number of filled cells, then a blank cell again and a variable number of filled cells. I am trying to concatenate the filled cells from column A into a single cell in column B, which is corresponding to the blank cell in column A. Values should be comma delimited.

For example: A2-blank; A3-27; A4-63; A5-blank; A6-31; A7-blank .. and in column B should be B2-27,63; B3-blank;B4-blank; B5-31,B6-blanc and etc.

View 5 Replies View Related

If Cell Has X Turn Into Number And Concatenate

Jul 4, 2009

Example is in the attch: Book11.xls. This formula works but if there is no number 4 then I don't want comma after 1, or 2, or 3, How avoid it:

results

1,2,3,4
1,2,
1,2,3,
3,4
1,
4
2,3,

(red , need to be removed)

View 5 Replies View Related

Autofilter Column Based On Month Number?

Dec 8, 2013

I am using the following to autofilter a column based on a month number

Worksheets("Data").Range("$A:$M").AutoFilter Field:=8, Criteria1:=Month(tempmon)

tempmon contains the month number (e.g 9 for september)

when I run this it filters but tempmon is equaling 1 when I know it is set to 9

i have tried

Worksheets("Data").Range("$A:$M").AutoFilter Field:=8, Criteria1:=Month(9)

View 9 Replies View Related

Copying Cell Based On Number In Other Column

Aug 13, 2009

I have a name in cell A1 and a number of 20 in cell B1. Is there a function to copy the name in cell A1 the number in cell B1 (20 in this case) times into column C?

View 9 Replies View Related

Concatenate Cell With Customized Number Of Zeros

Sep 20, 2013

I have a sheet where some data is entered in A1 to C1 and i use concatenate to string them together. The problem is in cell C1, where I used cell format to customize the number of zeros in front of the number.

EG:
A1: Photos
B1: 2013
C1: 00001

the concatenate result is Photos2013\1, instead of the desired result of Photos2013\0001.

View 3 Replies View Related

Concatenate In A Vlookup To Search For A Resource Number

Mar 4, 2010

what i am trying to do is use concatenate in a vlookup to search for a resource number and date, then return another column in the array.

the formula looks like:
=VLOOKUP(CONCATENATE(D7,$H$6),Roster_Allocation,7,FALSE)
but only results in NA.

if i search for the resource number only, i get the correct result.
also, the res# and date are concatenated in the table array. could this be related to the way excel is storing the dates (40241?) even though both concatenated fields look the same?
i have also tried adding a new coumn which has the res# and dates concatenated as the lookup value but still all NA.

View 9 Replies View Related

Concatenate Or Combinate Number A Cell Into Other Cells

Sep 19, 2006

How do I get my number in one cell to show all possible combinations of it in other cells. (e.g. cell B4 = 123, now i need cells C4:H4 to display all 6 combinations of the number as follows: 123, 132, 213, 231, 312, 321). Attached is a sample file.

View 3 Replies View Related

Remove Duplicates From Column 1 And Concatenate Column 2?

Mar 12, 2014

My issue is that I have 1200+ addresses to make more readable - the first column is the street name, the second is the post code(s) relative to the street - what Ideally I'd like to achieve is one row per street, the street name followed by the post codes... i.e. take this...

A33 Relief RoadRG2 0RR
Abbey SquareRG1 3AG
Abbey SquareRG1 3BE
Abbey SquareRG1 3BQ
Abbey SquareRG1 3FB
Abbey StreetRG1 3AN
Abbey StreetRG1 3BA
Abbey StreetRG1 3BD
Abbots WalkRG1 3HW
Aberford CloseRG30 2NX
Admirals CourtRG1 6SP
Admirals CourtRG1 6SR
Admirals CourtRG1 6SS
Admirals CourtRG1 6SW
Ainsdale CrescentRG30 3NG
Alan PlaceRG30 3BW
Albany RoadRG30 2UL

to this...

A33 Relief RoadRG2 0RR
Abbey SquareRG1 3AG, RG1 3BE, RG1 3BQRG1 3FB
Abbey StreetRG1 3AN, RG1 3BA, RG1 3BD
Abbots WalkRG1 3HW
Aberford CloseRG30 2NX
Admirals CourtRG1 6SP, RG1 6SR, RG1 6SS, RG1 6SW
Ainsdale CrescentRG30 3NG
Alan PlaceRG30 3BW
Albany RoadRG30 2UL

View 5 Replies View Related

UDF To Concatenate Column Range Conditional Upon Another Column

Jul 11, 2012

Writing a UDF for VBA as I'm getting frustrated by the concatenate function.

I basically want to create my own function that will concatenate values in column B, if the value in column A is correct.

I've been looking at this link [URL] ......

With a very simple data set as an example, I want the following output in column C:

pet
food
conc

cat
chicken
chicken,fish,catnip

[Code] ........

I think I need to create a cell based function which takes a conditional range (col A) and concatenate range (col B) as inputs, stores this as a 5 by 3 array and then returns the concatenated output I wish (by referencing the stored array) based on what value is in column A. A "concatenate if", if you like.

View 4 Replies View Related

Concatenate Column With Adjacent Column In Loop

Sep 27, 2007

I had a problem finding something then deleting the column, I tried to alter the code from that thread to solve a new problem and I am close (I think), but not quite there. I need to find the column "Group" and merge it with the column "Sex" which is offset by 1 column. This code will go through and find the column "Group" and merge for the first cell, but will then get stuck in a loop just concatenating "Sex" to the end continuously. I need it to concatenate both columns entirely together. Any simple fix to what I modified? Previous thread should you be interested:Find Part Text On All Sheets & Delete The Column.

View 9 Replies View Related

Calculate Number Of Dates Within A Column Based On Month

May 15, 2009

I have a column say column B for example that has a list of dates in the format dd/mm/yyyy. I would like a summary at the top of the columns to state how many dates there are for the current month. But I wondered if this was possible based on the TODAY() function or similar. Thus the user would not have to change anything.

So for example at the start of the month it may state 14. Half way through the month down to 6 and at the end of the month 0 for example.

View 6 Replies View Related

Copy Formulas Based On The Number Of Rows In Column

Jun 16, 2009

I have formulas in cells B8:F8. I need to copy these formulas down based on the number of rows in column A that has data. The data in column A will vary based on user input.

View 2 Replies View Related

Count Number Occurrences Based On Criteria Column

Feb 5, 2013

I get this work a lot and am looking for a much more effective way of working the dataset,

I have numbers like 1.1, 1.2, 1.3 and so on.......
These come under criteria like (1) = 1.1, 1.2, 1.3 and so on.....

I am look for an automated way of doing a count of any number that falls under this criteria, so I want to count based on criteria (1) it would count all 1.1,1.2,1.3 and so on as one count.

I am attaching a sample document to see how it is laid out. [URL] .....

View 6 Replies View Related

VBA To Highlight Cells Downward Based On Column A Number

Aug 26, 2013

I would like to highlight the cells in Column A the have numbers in them. Starting with that number shift down based on the number that many rows and highlight them.

HTMLSheet1 *AB154020842*4020843*4020844*4020845*4020846*4020847*40208483
5010909*50109010*50109011*50109012*50109013*50109014*501090153
50112016*50112017*50112018*50112019*50112020*50112021*501120222
50206523*50206524*50206525*50206526*50206527*50206528*50206529450212430*50212431*50212432*502124

View 3 Replies View Related

Concatenate Text And Numbers And Then Sort On Original Number

Jun 26, 2013

I have a data set that shows numbers for categories over time. I would like to add the data label to the numeric value and then sort the data by the original number. Is this possible?

Here's an example

A 1 2 3 4
B 5 7 4 1
C 8 0 2 1
D 3 4 9 5

I would like each column sorted independently based on the data in that column, but I want the results to have the label from column 1 concatenated with the value in the other columns such as this:

A1 C0 C2 B1
D3 A2 A3 C1
B5 D4 B4 A4
C8 B7 D9 D5

Each column is sorted by the numeric value, but has the name label from column 1 attached to it.

View 1 Replies View Related

Concatenate Based On Cell Value

Apr 29, 2009

Using Excel 2007. Can I use IF along with CONCATENATE.
=if(h26<.0099(concatenate(ak26,AK27))if(h26>.010(concatenate(ak26,aQ26,ak27))
Can't seem to get the proper syntax.

View 5 Replies View Related

Concatenate Rows Based On ID

Jun 26, 2009

I have attached an table and need to combine name from different rows which a condition that the ID is the same and the name are different from others. However, the code that i have will combine all the name if the ID is match. I'm not familiar with the Macro.

View 4 Replies View Related

Multiple Concatenate Based On Len

Apr 19, 2007

I have a formula, and it works okay, but I have to change it based on how many characters appear in a cell. I would like to avoid this, as there is just too much room for error.

The end result of my formula is to get a result like the following: U1C01EP or U1C01L04EP depending on which columns are completed. But the "variation" on the number of characters in the cell (1 or 2) and accounting for the leading zero is what is getting me confused.

In cell R4, I have the following formula:

=IF(S4="","",IF(X4="",CONCATENATE("U",V4,"C0",W4,$R$1),CONCATENATE("U",V4,"C0",W4,"L0",X4,$R$1)))

Column V always contains only 1 character, so this is not an issue. "U" will be added before the contents of this column in the formula
Column W will contain either 1 or 2 characters. If there is only 1 character, the concatenate needs to add a leading 0 following the "C" and then the contents of column W.

Column X will contain either 1 or 2 characters. If there is only 1 character, the concatenate needs to add a leading 0 following the "L" and then the contents of column X. Now this column may also be blank, if that happens, then there should be no "L" within the result, that portion would be left off.

Cell R1 contains the code that is added to the very end of my result. This code will change, so it is placed in a fixed location to be added to the end.

And I would like to keep the IF statement that I wrote accounting for Column S being Blank, yielding a blank cell completely as a result.

View 6 Replies View Related

Change Sign Of Number Based On Validation Dropdown In Another Column

Feb 21, 2014

This spreadsheet will be tracking sales and purchases. I want to be able to have any purchases formatted as an expenditure (negative sign or brackets) to show it is money out. Column C "Action" has a drop down with either Buy (infrequent) or Sell. I want to be able to have column I "Unit Price" be a negative number if the corresponding cell in the same row in Column C = "Buy". I do not have these prices formatted as currency as their are 2 different currency used and I don't know how to make the correct currency format appear automatically, though I do have a drop down validation column for which currency the transaction was in, so maybe that is possible. I know this is probably simple, but I don't spend that much time using Excel. I have some sample data in their for the moment.

View 2 Replies View Related

SUMIF Formula With Sum_Range Based On Column Index Number

Jun 22, 2009

Following is a summarized example of my data and what I am trying to accomplish.

[Column A] contains a list of account numbers. [Column B] contains current balances, [column C] contains balances from one month ago, [column D] contains balances from two months ago. Within the same spreadsheet I want the ability to type in the account number in one cell and then the column number in another cell. For example, If I type in the account number 1234 and the column number 3, I would get the balance from [column c]...if I typed in the column number 4, I would get the balance from [column D].

My first thought was to use a simple SUMIF formula that would compare the account number I type with the account numbers found in [column A]. The problem is getting a formula that can translate the number 3 to [column C] or the number 4 to [column D]. Note: the actual spreadsheet I am using extends out to column BI.

This is simuilar to the Column Index Number used in a VLOOKUP formula.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved