I have a text document disaggregated into sentences each in different cells. I need a way of selecting different cells with a mouse, and through a Macro, have the text from those cells viewed in concatenated form into new textbox generated by the Macro.
View 9 RepliesI have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
I am trying to concatenate multiple strings of text where each may have composite or compound formatting. Is there any way to maintain the formatting? The Characters.Insert method won't work because the resulting string is greater than 255 characters. See an example below.
String 1: When you simply concatenate
String 2: these strings, Excel discards
String 3: formatting at the character level.
Required Result: When you simply concatenate these strings, Excel discards formatting at the character level.
I am trying to find 3 values (X,Y,Z) in row A and concatenate those three values in column A for the entire range below, say A2:A100.
View 9 Replies View RelatedI cant quite get this, I have 4 cells in one row (a selection and can be any row), I need to string the values together and add some simple text.
Example:
Assume row 1 and columns A, B, C, D.
496 | 6d7 | Minor | Ø.375 +/-.010
What I need this to read as one long string:
#496, 6d7, Minor, Ø.375 +/-.010
Adding the text in Red.
Column A may be a single digit or up to 10 digits in length. Once the string is configured I want to copy it and manually paste in another application. If the string is placed any where else in the worksheet for formatting, it can be deleted after the copy/paste or macro end.
I want agglutinate some text values in the same cell. Something like that:
A1="John"
A2="Elton"
A3="Mark"
A4="AND"
B1=A1+A2+A3 =(John Elton Mark)
B2= A1 +A4 +A2 + A4 +A3 = (John AND Elton AND Mark)
I have a macro to concatenate multiple cells but unfortunately it is not giving the result,
It has to concatenate below mentioned cells and put the result in column N
Sub ConcatColumns()
Do While ActiveCell "" 'Loops until the active cell is blank.
'The "&" must have a space on both sides or it will be
'treated as a variable type of long integer.
Range("N1").Select
ActiveCell.FormulaR1C1 = _
"=CONCATENATE(RC[-10],RC[-9],RC[-8],RC[-7],RC[-6],RC[-5],RC[-1])& ActiveCell.Offset(0, 0)"
ActiveCell.Offset(1, 0).Select
Loop
End Sub
I am trying to figure out how to Concatenate a group of cells if they contain a certain text. Basically I have a list of Architects in column A and the account name in column B... and I want to say Concatenate column A, IF column B=Specific Account (ex: Coca-Cola). The list will be added to frequently so the formula must refer to the entire columns, not just a certain range.
As of right now, only the first architect associated with each account will appear. I have attached a workbook with the example..
example.xlsx‎
I am trying to join text in two different cells using concatenate function / & operator In the combined cell I want the text from second cell to appear in Bold while the text from first cell should continue to remain in normal font. Is there any way i could achieve this?
View 4 Replies View RelatedIf I have the following data set in cells A1:C9:
IDCommentFirst Unique
109876Low OilTRUE
109876Checked On 12/12FALSE
109877Checked on 12/15TRUE
109878Correct LevelTRUE
109877Correct LevelFALSE
109878PerfectFALSE
109877NewFALSE
109878Correct LevelFALSE
In the First Unique column (column C) I have formulas. In C2 I have this formula (and then I copied it down):
=COUNTIF(A$2:A2,A2)=1
In cell E2, I have this formula to count unique occurrences:
=SUMPRODUCT(C2:C9*1)
In cell G2 I have this formula to extract unique records (entered with Ctrl + Shift + Enter):
=IF(ROWS(G$2:G2)
I have several lists of hundreds of emails that I need to list in an email string via Lotus Notes. I need a space and comma in between each name, ex:
john.doe@dm.com, john.doe1@dm.com, john.doe2@dm.com
I am using the below formula manually but it is taking too long. How to automate this? Is there a way to create the space and comma for as long as the list is?
=CONCATENATE(B6,", ",B7,", ",B8,", ",B9,", ",B10,", ",B12,", ",B13,", ",B14,", ",B15,", ",B16,", ",B17)
What is the best way to concatenate with a semi-colon across multiple cells in excel. The one kicker is I only want to concatenate where the cell is populated.
If I write a simple Concatenate or combined columns, if a cell is blank I get the multiple.
I am looking for a way of creating the following conditioned concatenation.
I have two tables, let's call them "summary" and "detailed".
The "detailed" table is something like the following:
ID
VOL
001
01
001
05
[code]....
The "summary" table below gets info from the "detailed" table. The 'ID'is now unique. I'm looking for a formula on the 'VOL (concatenated)' column cells it should get all rows from the "detailed" table with the same ID and then concatenate the 'VOL' column results, comma separated:
ID (unique)
VOL (concatenated)
001
V01, V03, V05
002
V01, V04
003
V06
PS: I have people using this table with office 2003, so compatibility is necessary...
I have one row per day of the month in column A. each row has one or more cell entries in column B .... to column (variable) Right now I use a formula =concatenate(B2,CHAR(10),C2,CHAR(10),D2.....) for as long as it has to be, but this has its limits and requires a lot of editing as the number of filled cells for each row vary.
would it be possible with some macro code to manage the variable number of cells and then insert verything, wrapped text, in a single cell (can be cell Bx or a cell in a new column added next to the dates column) As soon as everything is in the single cell, the original data cells can be emtied. I can record a macro but that does not allow me to manage the variable number of cells . a small sample file attached.
Sampling table :
one
two
three
four
one
two
three
one
two
one
Desired results obtained via IF =IF(B2>0,A2&" , ",A2)&IF(C2>0,B2&" , ",B2)&IF(D2>0,C2&" , ",C2)&IF(D2>0,D2,"")
one , two , three , four
one , two , three
one , two
one
Is there any smarter, shorter formula via Concatenate and Substitute or other formulas ?
My closest match, but not good enaugh is =SUBSTITUTE(CONCATENATE(A2&", "&B2&", "&C2&", "&D2), ", , ", " ")
[ returna 2 commad ]
one, two, three, four
one, two, three,
one, two
one ,
I need to split content from a textbox into many cells.
The textbox isn't multiline and will contain content such as:
Rooney 18, Villa 27, Parker 54
Now I need each scorer placed into a separate cell each.
I have used a few pieces of code I have found and tried to adapt them but to no avail.
I had inquired on the setup of linking multiple cells to a single cell, in which Dave Hawley graciously provided me with the following code.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Column = 5 Then Worksheets(2).Range("B1") = Target
End Sub
What changes would I need to make in order to replace the cell B1 of Worksheet2 , with a textbox on Worksheet2?
I'm so proud of how i managed to get my first VBA project working. Yet there is one thing that's missing:
I would like to know how i can get the data entered in the cells to the left actively show in the textbox to the right.
Because i want to make a standard solution that can be copy pasted from the text field easily.
Screenshot of current VBA project.
I've been looking on the forum for hours, but couldn't find exactly what I need.
I have a textbox that the user enters muliple lines of text. I, then, copy the text to a sheet. The problem I'm having is the pasted text is all in one cell. I would like each line to be in a different cell.
My textbox has multiline = true, wordwrap = true, EnterKeyBehavior = true.
I've created a variable number (i) of text boxes at run time (i also named them, "txt"&i, at the same time), i'm now trying to get the values entered in these to fit into a column that has been inserted during the same sub routine. I'm having a bit of trouble refering to the text boxes though, this is the patch of code i'm struggling with:
Dim TextBox As String
For i = 0 To 2 * NumVar - 1
TextBox = "txt" & i
ActiveCell.Offset(i, 0).Value = TextBox.Value
Next i
I also tried this:
Dim TextBox As Object
For i = 0 To 2 * NumVar - 1
TextBox.Name = "txt" & i
ActiveCell.Offset(i, 0).Value = TextBox.Value
Next i
I am designing a from with a variable number of titles. The user should be able to insert a title into a column by typing in the title that he wants into a text box, and pressing a command button that I have created ( named add). The problem arises when I try to get the text to lie vertically as opposed to horizontally (in the cell, not as a text box. If this can only be done as a textbox, let me know). Is there any way to do this?
View 5 Replies View RelatedI would typically consider myself a decent Excel user, but I haven't been able to solve this one. Maybe it's just the lack of sleep now. I am attempting to combine 4 cells into one where the last cell contains a date. Below is the formula I am using:
=B3&" "&C3&" "&D3&" "&TEXT(E3,"m/d/yy")
It works when all of the cells have values, but the only problem I am having is that some of the dates (in column E) are blank. When this cell is blank the default date that displays is "1/0/00." If I add the typical, " " at the end it says the formula has errors. The need for the TEXT(E3,"m/d/yy") for the cells that contain dates is throwing me off.
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedCode:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
Looking for a macro to insert a textbox with the textbox containing a formula rather then text.
Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub
I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....
I have a dataset of shifts and want to compare each shift that needs to be filled to a list of requests for time off (vacation, etc).
For one cell the code is: =IF(ISERROR(SEARCH(B1, A1), 0,1)
Where A1 is the column of requests in comma delimited forme (ie: "AB,CD,EF").
Where B1 is the column containing the person assigned to shift 1 (ie: "AB")
In this case, would return a "1" as no error was returned, as AB was found in the list. Here "1" would represent a schedule conflict.
Without creating many cells for each shift- there are 20 shifts- can I create an array or string together this type of "SEARCH" function?
share a macro to copy cells from range C20:C300 and paste them in C2 on multiple lines. If possible two lines gap between each cell's value when they are pasted in C2.
View 9 Replies View RelatedI have attached my file.
When the Go button in text box in the 'VSVA-1 Data' tab is pressed, a new tab is created. I would like the tab to be renamed after the text that is entered into the text box. Is this possible? Here is what I have so far.
VB:
Sub RenameTab()
'Renames the worksheet tab
ActiveWorkbook.Sheets("VSVA-1 Data").Select
tabName = TextBox1
ActiveWorkbook.Sheets("VSVA Data").Select
Selection.Name = tabName
End Sub
The formula below works great for counting. I need to use the same formula to CONCATENATE all of the names in B:B. It seems as though I should just replace COUNTIFS with CONCATENATE and change Data!C:C to Data!B:B, but it doesn't work. I tried a search on the web using the title of this thread but came up with very few clues. Is it even possible to CONCATENATE with multiples IFS?
=COUNTIFS(Data!C:C,IF(B2="All","*",B2),Data!D:D,IF(B3="All","="&W5,Data!E:E,"
In Excel 2007 I want to concatenate two columns of text. In Column A all the cells contain a single statement that I want to prefix the statements in the cells of column B (the statements in column B differ from cell to cell) I have used the formula =A1&" "&B1 and this is fine for that row, when I use the fill handle and pull it down the page the formula changes accordingly i.e.=A2&" "&B2, =A3&" "&B3 etc. But when I make the text appear using control+ I only get the concatenation of the first row repeated all the way down, irrespective of the contents of other cells in Column B.
View 14 Replies View Related