I've been looking on the forum for hours, but couldn't find exactly what I need.
I have a textbox that the user enters muliple lines of text. I, then, copy the text to a sheet. The problem I'm having is the pasted text is all in one cell. I would like each line to be in a different cell.
My textbox has multiline = true, wordwrap = true, EnterKeyBehavior = true.
I have Useform1 & Textbox1 & Textbox2 & CommandButton1
*Textbox1 = Identifier where to put the "X" mark when data is found
*TextBox2 = The User Data 'It is a multiline textbox
*CommandButton1 = Execute the macro
*Excel Column "B3" = Where the textbox2 data will be compared. this one has default data.
*Excel Row 2 = the identifier where to put the "X" mark when the data is found.
The user will enter data in textbox2, For each TextBox2 Value it will be compared in the Data in Column B3 only If the Textbox1 Value found in Row2 which has the codes. Then when the Value is found. it will mark with "X" in the column where the TextBox1 value found. see my screenshot.
Form Screenshot : Capture2.PNG
ExcelSheet Screenshot : Capture1.PNG
Right now I only have this code.
[Code] ....
I'm trying to write a macro, and the first thing I need it to do is paste a value into the currently selected cell. This value, though, will usually be multiline. So when I try to do it now, it pastes into the selected cell and the cells below it (one for each line of the pasted value). When I'm pasting manually, I avoid this by pressing F2 to edit the cell first, and then pasting. But how can I do this using a macro? Is there a type of paste command that will insert the multiline value from the clipboard into the selected cell?
View 2 Replies View RelatedI basically have a five column spreadsheet containing address information. While most cells only contain one piece of information, I have quite a few cells that have multiple lines of data in them because the individual has more than one address.
Here is an example. Note that Rows 1-2 contain single address info for each individual person. However, row 3 contains an individual with 3 pieces of address information in the four right hand columns:
Row 1: Unique ID | Name | Street Address | City | State | Zip Code
Row 2: Unique ID | Name | Street Address | City | State | Zip Code
Row 3: Unique ID | Name | Street Address | City | State | Zip Code
[carriage return in street address, city, state and zip cells]
--------------------------------- |Street Address | City | State | Zip Code
[carriage return in street address, city, state and zip cells]
--------------------------------- |Street Address | City | State | Zip Code
Row 4: Unique ID | Name | Street Address | City | State | Zip Code
Row 5: Unique ID | Name | Street Address | City | State | Zip Code
Please note that some individuals have 2-4 different addresses.
I would like to manipulate the 5 rows of example data above so that when I am done I have the following:
1. 7 rows of data (5 individuals with 7 total addresses)
2. Automatically copy and paste the unique id number and name into the two new rows that were created so that I have the following:
Row 1: Unique ID - 001 | Joe Chang | Street Address | City | State | Zip Code
Row 2: Unique ID - 002 | Joey Chung | Street Address | City | State | Zip Code
Row 3: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 4: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 5: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 6: Unique ID - 004 | Jane Derry | Street Address | City | State | Zip Code
Row 7: Unique ID - 005 | Julie March | Street Address | City | State | Zip Code
I need to split content from a textbox into many cells.
The textbox isn't multiline and will contain content such as:
Rooney 18, Villa 27, Parker 54
Now I need each scorer placed into a separate cell each.
I have used a few pieces of code I have found and tried to adapt them but to no avail.
I had inquired on the setup of linking multiple cells to a single cell, in which Dave Hawley graciously provided me with the following code.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Column = 5 Then Worksheets(2).Range("B1") = Target
End Sub
What changes would I need to make in order to replace the cell B1 of Worksheet2 , with a textbox on Worksheet2?
I'm so proud of how i managed to get my first VBA project working. Yet there is one thing that's missing:
I would like to know how i can get the data entered in the cells to the left actively show in the textbox to the right.
Because i want to make a standard solution that can be copy pasted from the text field easily.
Screenshot of current VBA project.
I have a text document disaggregated into sentences each in different cells. I need a way of selecting different cells with a mouse, and through a Macro, have the text from those cells viewed in concatenated form into new textbox generated by the Macro.
View 9 Replies View RelatedI've created a variable number (i) of text boxes at run time (i also named them, "txt"&i, at the same time), i'm now trying to get the values entered in these to fit into a column that has been inserted during the same sub routine. I'm having a bit of trouble refering to the text boxes though, this is the patch of code i'm struggling with:
Dim TextBox As String
For i = 0 To 2 * NumVar - 1
TextBox = "txt" & i
ActiveCell.Offset(i, 0).Value = TextBox.Value
Next i
I also tried this:
Dim TextBox As Object
For i = 0 To 2 * NumVar - 1
TextBox.Name = "txt" & i
ActiveCell.Offset(i, 0).Value = TextBox.Value
Next i
I am running a macro and I need to add this example of text corresponding to the #of line in the exact way, at the end of the data. I was able to do by loading an external file, however, I have to set a path to it, but only I can use it. I want to be able to give to my colllegue so she can also run the macro and have that note at the bottom on the data too.
The total should be in 12 row as per the example...
Note example.xlsx
I have a couple of active x text boxes that I am using in a user form to enter data to a sheet. I wasn't able to get the text to move to the next line, but I changed the Multiline and EnterKeyBehavior to True and now when I hit enter it is working how I want it to. But when I click ok on my user form it is putting the data where I want it but it is putting a symbol that looks like a ? with a border around it in where I am pressing enter. Is there a way to avoid having this symbol show up?
The other question I have is if it is possible for specific text to be Bold in the text box and some not? I haven't been able to figure out a solution for that.
I have the following VBA code in Excel that looks in sheet called mri.txt for a cell called “AcquisitionMatrix”, Then goes one cell down and two cell to left and copy them all into Application.Workbooks(imgMain).Worksheets("Sheet1").Activate cell “AC2”, But for some reason it copies the field’s name as well such as:
AcquisitionMatrix , 0, , 256, , 256,.
Is there a way to avoid copying the filed name into cell AC2? Such as :
0, , 256, , 256,?
here is the
I have a spreadsheet that contains data that is currently split up into 2 or more cells. Sometimes it's 2 cells, sometimes 3, even 4, etc. I would like to right click on multiple adjacent cells, select copy, right click on another cell and paste these multiple cells into 1 cell. I checked paste special but didn't really find anything. I'm not sure a formula/macro would work either as I need to manually determine which cells need this attention.
View 2 Replies View RelatedI have to take data from about 10 rows and then paste them into ONE cell . . . any easy way of doing that without VBA or concatenating?
Example -
Move -
Jeff
Bob
Joe
Mary
into Jeff Bob Joe Mary
how to loop through workbooks in a certain directory and copy the rows in sheet1 where column B contains numbers greater than zero, and then pasting them into a new master workbook. The sheets will be named differently each week but will always be in the same directory.
View 4 Replies View RelatedIs it possible to copy data and right click paste it into a textbox on a userform?
View 5 Replies View RelatedI am using a macro that copied a string from another app, and I would like to know if there is a way to remove the sign "_" (underscore) before it paste to the TextBox1?
I declare the textbox as : TextBox1.Value = DATA
When the macro run, it takes the info from the app and send the string DATA to the TextBox1.Value, however there is ugly _ from the data. I want to be able to remove that sign right after it paste into the TextBox1.
I have a form that adds and edits data on a sheet. I would like the user to be able to select any row of that data and then a macro copies the data from column A for example (ID1234). Launch my form (FmAddTask) and then paste it into the combocbox (idlookup).
Hence enabling immediate editing of that row of data via the form.
I made a start:
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I have the following code
VB:
For Each cell In Range("D8:D11")
If cell.Value <= Range("M2").Value Then
Cells(cell.Row, 13).Value = Me.TextBox1.Value
[Code].....
The code works to where if D8 > M2, then a cell in N2:EK2 is populated with the textbox value if D8 = a column in N2:EK2 Unlike above, the textbox value for each cell in range D8:D11 is written seperately to it's appropriate row BUT to following occurs: If row 8 user input: textbox1.value = "name1", then the appropriate cell in row 8 will contain "name1" But if row 9 user input: text1.value = "name2", the appropriate cell in row 9 will contain "name2" AND the "name1" in row 8 will change to "name2" How do recognize these as separate entities without having to create a new userform/textbox for each case?
I have a cell with entries as follows for example
abcd
efgh
ijkl
i would like to split it over multiple columns. Let me be a little more specific.
my data is arranged as follows in the cell
abcd<space><enter>
efgh<space><enter>
ijlk<space>
I want it as follows in ONE cell as follows
abcd<space>efgh<space>ijkl
OR
Column 1 Column 2 Column 3
abcd efgh ijkl
1. "Data -->Text to columns" : doesn't work for some reason, only my first string "abcd" is being read. Please do remember I have more than a thousand entries so manual change on each cell would be difficult.
2. =clean() : removes the spaces making data splitting impossible.
3. =trim() : same as above
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
I have 8 different files all have a set of data in them
each one has a long list of (column a-n) however the number of rows change by date. I need each file copied into the finalfile.xls one after another. in the files that will be merged into the final file the final row i need copied is blank.
I have all the copy formulas and everything set, I just need a range to copy that automaticaly takes cell a10 to the first blank a cell from each file and pastes it in the finalfile.xls under the last paste so they dont over write each other.
I’ve got a folder on drive C named “Customer Sheets”. In this folder at any time there could be over 500 individual customer sheets. i also have a "Summary Workbook" on drive C
What I need is a macro in my "Summary Workbook" that copies cells (“B3, B6, B12, B13, G5, G6”) form every customer sheet in my “Customers Sheets” folder and paste it into my “Summary Workbook” onto sheet2, every customer in a new row.
The “Summary Workbook” should run this macro every time it is opened or on my command so that the database is continually refreshed when a new customer sheet is made.
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
I am trying to build a userform that will display an array of cells A1:T40. I need all of the formating to show as well. I can get 1 cell to showusing code from this forum but cannot get the full array to show.
The plan for this userform is to create a form based on information in the cell range. Then give the user the choice to print.
creating this excel file with multiple comboboxes, i was wondering if i can add another into the equation. so i can have sub-categories.
i have attached the original file and how i would like to change the layout!
i also have another question, see with the info that would go into the textbox is there anyway you can put writing on seperate lines,
eg:
Lettuce
Mayo
Tomato
all within the same cell?
I need to use two types of fonts to not only display a string of characters in a textbox but also past to a cell as viewed in the textbox.
An example string:
[#|:.010(M)|A|N(M)|B(M)]
The above string in Arial font would look like this:
[TP|Ø.010(M)|A|N(M)|B(M)]
I am simulating a GD&T instruction (Geometric Deimensioning and Tolerancing).
My dilema stems from the first character "[" and the last character "]".
I use both of these characters to open an instruction and close the instruction (as if all characters are surrounded by a rectangle).
What I cant figure out is how to isolate the first "[" and the last "]" (They will always be the first and last characters of an unknown string length). The first "[" would be an "Arial font" and the last would be an "Arial font" everything in between is another font (in this case Verisurf).
See attached example jpg file.
"verisurf1.jpg"
Verisurf uses both "[" and "]" as alternate characters. I only need to capture the first and last character if: 1. The first is a "[" and or the last is a "]". They will never be vice~versa.
I am trying to build a simple tool using an userform. I have my results as a range of cells A1:A10 in an excel sheet. The result will be like:
1-1
2-4
5-8
8-8
9-14
14-14
15-16
17-19
20-21
22-23
But I want the result to be displayed in one textbox in userform.Is there any way?