Where A3 D7 and A4 concatenate to form a workbookname!named range1 and equally A3 D7 and A5 form workbookname!named range2 works perfectly well for a fixed range as named range, but not if the named range is dynamic using the typical OFFSET, COUNTIF method?
I need to be able to concatenate the range reference in this way, but for the named range reference to be a dynamic range that will grow and change with additions etc.
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project Benefit Type Delivered or Enabled Benefit
PJ1 Financial Delivered Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered Financial - Enabled Tech - Delivered Tech - Enabled Green - Delivered Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
I have a macro to concatenate multiple cells but unfortunately it is not giving the result,
It has to concatenate below mentioned cells and put the result in column N
Sub ConcatColumns() Do While ActiveCell "" 'Loops until the active cell is blank. 'The "&" must have a space on both sides or it will be 'treated as a variable type of long integer. Range("N1").Select ActiveCell.FormulaR1C1 = _ "=CONCATENATE(RC[-10],RC[-9],RC[-8],RC[-7],RC[-6],RC[-5],RC[-1])& ActiveCell.Offset(0, 0)" ActiveCell.Offset(1, 0).Select Loop End Sub
I have a text document disaggregated into sentences each in different cells. I need a way of selecting different cells with a mouse, and through a Macro, have the text from those cells viewed in concatenated form into new textbox generated by the Macro.
Is there a way to nest IF & And statements. I'm looking to concatenate a number of cells and seperate them with a space and/or comma but only if they contain data so need something along the lines of
I am using the below formula manually but it is taking too long. How to automate this? Is there a way to create the space and comma for as long as the list is?
What is the best way to concatenate with a semi-colon across multiple cells in excel. The one kicker is I only want to concatenate where the cell is populated.
If I write a simple Concatenate or combined columns, if a cell is blank I get the multiple.
I have one row per day of the month in column A. each row has one or more cell entries in column B .... to column (variable) Right now I use a formula =concatenate(B2,CHAR(10),C2,CHAR(10),D2.....) for as long as it has to be, but this has its limits and requires a lot of editing as the number of filled cells for each row vary.
would it be possible with some macro code to manage the variable number of cells and then insert verything, wrapped text, in a single cell (can be cell Bx or a cell in a new column added next to the dates column) As soon as everything is in the single cell, the original data cells can be emtied. I can record a macro but that does not allow me to manage the variable number of cells . a small sample file attached.
I am attempting to use concatenate to combine two cells of data, but to only display the information if both cells contain information.
Currently using the following simple formula: =concatenate(a1,a2)
However, I only want it to work if both a1 and a2 cells contain data. If only a1 contains information, but a2 is blank, I want it to calculate a blank cell.
I am looking for a way of creating the following conditioned concatenation.
I have two tables, let's call them "summary" and "detailed".
The "detailed" table is something like the following:
ID VOL
001 01
001 05
[code]....
The "summary" table below gets info from the "detailed" table. The 'ID'is now unique. I'm looking for a formula on the 'VOL (concatenated)' column cells it should get all rows from the "detailed" table with the same ID and then concatenate the 'VOL' column results, comma separated:
ID (unique) VOL (concatenated)
001 V01, V03, V05
002 V01, V04
003 V06
PS: I have people using this table with office 2003, so compatibility is necessary...
Desired results obtained via IF =IF(B2>0,A2&" , ",A2)&IF(C2>0,B2&" , ",B2)&IF(D2>0,C2&" , ",C2)&IF(D2>0,D2,"")
one , two , three , four one , two , three one , two one
Is there any smarter, shorter formula via Concatenate and Substitute or other formulas ?
My closest match, but not good enaugh is =SUBSTITUTE(CONCATENATE(A2&", "&B2&", "&C2&", "&D2), ", , ", " ") [ returna 2 commad ] one, two, three, four one, two, three, one, two one ,
The array sum function works but Concatenate not. In Excel I get the formula Concatenate(H2:H3) in stead of Concatenate(H2,H3). What should I change to get the code working?
In the attached file on the Final Lists tab I have an Array formula in each column. My problem is that I need to extend this to cover approx 500 columns. Is there any way that I can cut'n'paste or drag the formula across all the 500 columns, have my references increase with each new column, but also retain my $ references (ie my formula format)?
As it is, I am facing having to either type or correct each and every one of the 500 columns. As you can see, I am a little bit of a newbie when it comes to the intricacies of excel.
Reports!$A$1:$A4000 = column A lists multiple agent's names A5 = a specific agent's name Reports!$H$1:$H$4000 = column H contains a number which has been converted from time to a number
86400 = number of seconds in a day (the cell where I am placing the formula converts the number back to a time format)
The average I'm looking for will give me an average of all times which are greater than zero.
I am currently using the array formula to find out the most recent date a business as referred a deal. I have been using the below array formula to figure this out...
However, we have now have two types of deals. Opps and Suspects. SO now i need to figure out the most recent date from Opps!G:G and Suspects!G:G... regardless of what the deal type is. Hope that makes sense.
Basically i need to have a formula along the same lines as above but MAX date from if conditions from Opps OR conditions from Suspects
I am looking for a formula that averages the numbers in an array if they match the row and column text-based criteria. Based on another thread, I found and edited the following formula. However, it is giving me incorrect numbers.
I wanted to do a multiple return vlookup so I used an Index formula. I have account names and am trying to vlookup contacts associated with those accounts (4 max). So I have a list of Accounts all with 3 blank rows in between them.
How do I loop an array formula? So far I have the code..
[Code] .....
This finds the 4 contacts associated with the first account in C5 which I named the cell "myVar". I now want it to find the contacts associated with the accounts in C9, C13, C17 and so on until the first empty cell.
I am trying to do a sum of data that contains three requirements - The country has to match either the USA or Canada and then it needs to pull for only a certain month (i.e. Jan, Feb, Mar) and then for that month only pull either Airfare, Hotel, Per Diem, or Car Rental. Basically looking for a way to Sum only the specific category for a specific time frame.
I'm tryig to find a way to index data in an array that meets certain matching criteria. I am looking for an employee's rate on a given day by searching a database that lists the dates that an employee's rate was changed. I was hoping to solve it with a crafty index and match array formula but have been unable to find something that works so far. I have attached a simplified example of what I am trying to do.
I am creating a summary page to analyse my golf scores. I have come to a dead end when looking at the Par statistics. Does anyone fancy a challenge and try to fill in some of the blanks on the summary tab. I am trying to use array formulas based on multiple criteria. for instance under the Best Par 3 section, it would look at all the Par 3's for whichever golfer is selected and then return the lowest number.
I am trying to find compare the value in one cell with an array of cells. My problem is when I try to carry the formula down to the next line - my array changes as well. For example:
Before After 01915
[Code].....
So, if Before is Column A and After is Column G, the formula I have right now is =INDEX(A2:A3349,MATCH(G2,A2:A3349,0)). When I try carry the formula down to G3, G4 and so on, the array changes as well.
In the attached example file, I have two tabs: options and sets. The options tab is to be populated from a form. The sets tab is to draw data from the options tab to create teaching sets. I have managed to create an array formula that does this for me, but what I would like it to do is sort my resulting list alphabetically. For reasons that I won't go into, I need the data on the sets tab to remain in three columns: First Name, Surname and Form.
This is the array formula I am using at the moment: AliGW - Example.xlsx
I would like to have a formula in one cell that finds records on another sheet that meet certain criteria, and produces a sum of the total quantities associated with that record. The attached workbook has more details as to what I am trying to do.
I am trying to use the SUM IF Array formula to sum a group of numbers that fall under a heading of reference numbers over several sheets of data. For example purposes lets say my spreadsheet looks something like the below.
A B C D E 1 2600000248391 2600000393805
[code]......
The first two digits of the heading numbers are the criteria I am trying to use to separate and sum the data. For example I need to sum the value of the data below headings that falls between 1400000000000 and 1499999999999.
For the example above I used the below formula for the current Sheet and it works fine.
