I'm trying to get the following formula to give me a result with the inches " symbol on the end.
=IF(SPECS!B2="K1318","1.388",IF(SPECS!B2="K13518","1.985",".950"&""""))
So I want either 1.388" or 1.985" or .950". The current formula will only give me .950".
How, using PageSetup and xlPaperSize properties, to setup a custom paper size of 4 inches by 6 inches???
View 3 Replies View Related[Code] ......
Trying to get columns 10, 11 & 13 to join so it says "Mr Noddy Bigshoes" (Salutation, Forename & Surname).
VBA code to use input box result in a Concatenate function.
Sub test()
Dim DistName
DistName = Application.InputBox("Enter District Name")
ActiveCell.FormulaR1C1 = "=CONCATENATE(R[-2]C[1],"" Diabetes Dist"")"
End Sub
I want to replace R[-2]C[1] with the result from the input box.
=IF($A2="","",IF(O$1="","",VLOOKUP($A2,HQA01!$A$24:$AG$525,6,FALSE)))
The above statement works great, but when I try to replace the HQA01 (worksheet name) with a cell reference it doesn't work anymore. I want to point to the cell that has that name of the sheet in it rather than hardcode each sheet name.
=IF($A2="","",IF(O$1="","",VLOOKUP($A2,$Q$1&"!$A$24:$AG$525",6,FALSE)))
When I try the &, or the concatenate function it appears to put quotes around the entire result
I need to convert inches to feet and inches in this format:
88 1/2 = 7' 4-1/2"
...so that if 88 1/2 is in cell A1, cell B1 will show 7' 4-1/2".
The exact syntax of B1 must be as shown.
I have a list of P/N's that are used in more then one location. and it's sorted by P/N's.
ColA__ColB__ColC
______Loc___PN
______1_____A
______2_____A
______3_____B
______4_____C
______5_____C
I Want to be able to put in Col A the concatenate results of all equal P/N's from any given list. Or at least select the few cells that i know are duplicates and from that copy the Location to a single Column.
ColA ColB__ColC
______Loc__PN
1,2____1___A
_______2___A
_______3___B
4,5____4___C
_______5___C
I am making an excel spreadsheet that auto fills in a lot of items for a construction company. One of the most important ones is the Roof Pitch.
1/12 pitch is 1 inch rise every 12 inches.
2/12 pitch is 2 inch rise every 12 inches.
I would like it to auto calculate this and add it to the over all height of the building.
Example:
A house is 20 feet wide with a 2/12 pitch.
Since the Ridge is in the center we divide the Width in half.
So a 2/12 pitch over a span of 10 feet is 20 inches
Could someone please tell me what is wrong with this formula. I have been looking at it for so long, I can't even concentrate .....
View 9 Replies View RelatedI am working on a simple calculater, what I want to do is figure sq. inches my problem is every thing I try the decimals won't calculate right,, this is a example of what I want to do
8.25x10.75= 81 sq"
I am creating a spreadsheet for some deliveries. The pieces I have are all in feet and inches and multiplied by a certain quantity. I need a formula to run this and give me feet as an answer.
I have 4 cells, in A1 I have feet without the foot mark (20) and in cell B1 I have inches without the " (5). In cell C1 I have 20. How do I write a formula to do the following:
20'-5" multiplied by 20 = Answer in D1 408'
Is there a way to convert a value in a cell that is 2'-3 1/2" to adecimal such as 27.5"?
excel 2003 SP2
I am trying to calculate volume in inches then in feet using 2 methods to check my work.
Method ....
Is there a way to store a text style that will allow me to convert decimal numbers into feet and inches in the same cell?
I want to be able to type in a number like 3.5 and have it read 3'-6".
I need help shrinking down my formula to make it fit in one cell.
Right now, the way i have it, it spans across (7) different cells to get the results i desire. Is there a way i can make this shorter?
A11 This is where the decimal value of a number is inputted.
B11 This is the final display after running A11 through the formulas below
Here are my formulas: ...
well in one of my excel reports, i am using a dsum formula and plotting a chart against it. i do not want to show the zeros on the graph, is there anyway i can do that, i could not find anything in the tools -> options.
View 2 Replies View RelatedSampling table :
one
two
three
four
one
two
three
one
two
one
Desired results obtained via IF =IF(B2>0,A2&" , ",A2)&IF(C2>0,B2&" , ",B2)&IF(D2>0,C2&" , ",C2)&IF(D2>0,D2,"")
one , two , three , four
one , two , three
one , two
one
Is there any smarter, shorter formula via Concatenate and Substitute or other formulas ?
My closest match, but not good enaugh is =SUBSTITUTE(CONCATENATE(A2&", "&B2&", "&C2&", "&D2), ", , ", " ")
[ returna 2 commad ]
one, two, three, four
one, two, three,
one, two
one ,
I have a table set up that calculates feet and inches. My problem is that if I have an answer like 2'-0 3/8", it suppresses the zero. I tried setting the format up like ##"'" ##"''" ?/? with no luck.
View 2 Replies View RelatedI need a formula to automatically convert inches to square feet. I have =IF(G5>12,G5/144). and G5 is the cell used to enter your inch value. The formula wrks great, but only if you enter over 12 inches. I'm pretty sure Im on the right track, just need to know how to add in the part about if its less than 12 inches it should be multiplied by 12.
View 5 Replies View Relatedbelieve this is a simple formula I just cant seem to get it right. Example: H1 has 859.375 and I need H2 to be 71' 7 3/8
View 5 Replies View RelatedFormula (or a chart) for converting centimeters to inches.
View 1 Replies View RelatedI am new to Excel but not programming and I am looking for a recommendation for the following. I have a spreadsheet that simply takes the length and width of an area and computes the square feet and yardage and other sundry items. I am entering the feet/inches as follows:
Example: 11.3 (equals 11/ft 3/inches)
The correct decimal conversion should be 11.25 but, obviously, it does not know that the number to the right of the decimal point is an indicator of inches. (ex.: .5=.42, .7=.58, .9=.75, .11=.92)
I have approached this from the stand point of an IF condition, finding the position of the "." and grabbing everything to the right (+1) but I understand that the limitation is 7 nested IFs.
Can someone get me kick-started on what the best approach would be to get my entry to convert to the true decimal equivalent? Currently, I am simply doing the conversion from memory but I would rather automate this sometimes errant approach.
This is a continuance of the Q and A below. Except the answer below converted a decimal like 1.44 to and answer like 1' 5.28".
except the final format I am after requires the 5.28" to be fractional such as:
1' - 5 1/4"
Is there a formula for this format?
How the heck to work with comboboxes and listboxes.
In entering column widths, I want to do inches. I understand inches. I don't understand points.
The instructions say that it will take whatever is in the User Control Panel: Regional: Number settings. I checked. It is US system. Not points.
MSO 2010. Can I change it to inches or do I need to get used to points?
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
I have a sheet that when printed out, will have 1 or more check boxes (depending on a formula) beside various items. Basically, if in a datafield it shows that there should be 3 boxes beside a line, it will show similar to this (except the O's are check boxes).
Usable 3 times per day. O O O
In the actual symbols list, there are no such symbols. I think there must be another type of symbol available as I use: ►
I grabbed that symbol from another spreadsheet, and I have no idea where it came from. I have wanted a similar arrow that points to the left or up, but I have no idea where to find them. I only know that the spreadsheet accepts a copy/paste of this symbol, and it does not seem to be related to any particular font set.
where I could find a "empty box" symbol, and also tell me where symbols like ► come from.
I have excel result sheet which contains students information. i.e. name, subjects and their corresponding marks, grade, percentage etc. So from that sheet I want to print result cards for each students separately from the data (result sheet).
View 4 Replies View RelatedI need to use the following symbol (,, ▬ ) to show when my prices went up or down but when I try to use them in the VBA, they are replaced by a ?
I considered using the CHAR function, but its 255 characters do not incorporate the one I need.
I have a large list of data.
Approx 10,000 rows.
All I'm looking to do is delete in each row everything after the / symbol.
So everything after a forward slash gets deleted.
All my data is in ColA from A3 downwards.
Ideally would love a macro I can assign a button to.
As an example;
info@123croieres.com/Categories/travel-and-tourism-lodging.htm
So the above after the macro run would look like;
info@123croieres.com
I'm logging temperatures and I want to add the degree symbol "" to the end of the numbers, how do I do that? It's easy if I just use one number (#), but how do I do it when adding the lowest and highest in the same cell, e.g. 33-35?
View 9 Replies View Related