well in one of my excel reports, i am using a dsum formula and plotting a chart against it. i do not want to show the zeros on the graph, is there anyway i can do that, i could not find anything in the tools -> options.
View 2 RepliesI have created checkbox for all the rows of items in sheet1 so that they will be able to select and then copy to sheet2.
example:
If a checkbox at row 1 in sheet1 is selected, the entire row (which the checkbox represent) will be copy into sheet2 (which would have the same column headers).
If a checkbox at row 2 in sheet1 is not selected, nothing will be done there.
If a checkbox at row 3 in sheet1 is selected, then the entire row of 3 in sheet1 will be copy again into the next avalible row in sheet2 (in this case, row 2 in sheet2)
.
.
.
There will be other informations at the beginning (top) of each excel worksheet which does not need to be touch at all. Only the data portion (starting column C row 16 in sheet1 and column A row 16 in sheet2) will need to have the above function.
How, using PageSetup and xlPaperSize properties, to setup a custom paper size of 4 inches by 6 inches???
View 3 Replies View RelatedRemove duplicate but add values.xlsx
I have about 800 records and the the unique identifier are the names. Some owners are repeated several times and they have different values for the EDU column in my project. I need to remove any duplicated owners but I need to add up the values of each record that had value so I can get a combined value for one owner instead of a repeated owner with smaller values. How would I go by doing that? A formula or is there a tool in excel? I am lost on this one. I uploaded a sample file so you can see what I trying to do.
BTW i found if the values are the same for the EDU then I can not add them since it is also duplicated. I can only add up the unique values for the EDU.
I have been trying to formulate a condition to fill up my timeline by checking the start and end times and date of jobs.
In my attached worksheet, I have an example (which was done manually) what I would expect the timeline to look.
[URL]...
For example,
SLIS900H has a start of 6/8/2014 11:54:05 AM and end of 6/8/2014 12:03:15 PM
As such, the TimeLine entries 06/08/14 11:00 and 06/08/14 12:00 would be shaded (or at least have some indication that it is to be shaded). After which, the Main Task from which SLIS900H belongs to (TSOH Extraction), would also have its Timeline shaded.
In a sheet the first collum is defined as a date field. However the dates a represented as a number on screen. How can I change the way it's showed on screen?
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I need to convert inches to feet and inches in this format:
88 1/2 = 7' 4-1/2"
...so that if 88 1/2 is in cell A1, cell B1 will show 7' 4-1/2".
The exact syntax of B1 must be as shown.
I am making an excel spreadsheet that auto fills in a lot of items for a construction company. One of the most important ones is the Roof Pitch.
1/12 pitch is 1 inch rise every 12 inches.
2/12 pitch is 2 inch rise every 12 inches.
I would like it to auto calculate this and add it to the over all height of the building.
Example:
A house is 20 feet wide with a 2/12 pitch.
Since the Ridge is in the center we divide the Width in half.
So a 2/12 pitch over a span of 10 feet is 20 inches
Could someone please tell me what is wrong with this formula. I have been looking at it for so long, I can't even concentrate .....
View 9 Replies View RelatedI am working on a simple calculater, what I want to do is figure sq. inches my problem is every thing I try the decimals won't calculate right,, this is a example of what I want to do
8.25x10.75= 81 sq"
I am creating a spreadsheet for some deliveries. The pieces I have are all in feet and inches and multiplied by a certain quantity. I need a formula to run this and give me feet as an answer.
I have 4 cells, in A1 I have feet without the foot mark (20) and in cell B1 I have inches without the " (5). In cell C1 I have 20. How do I write a formula to do the following:
20'-5" multiplied by 20 = Answer in D1 408'
Is there a way to convert a value in a cell that is 2'-3 1/2" to adecimal such as 27.5"?
excel 2003 SP2
I am trying to calculate volume in inches then in feet using 2 methods to check my work.
Method ....
Is there a way to store a text style that will allow me to convert decimal numbers into feet and inches in the same cell?
I want to be able to type in a number like 3.5 and have it read 3'-6".
I need help shrinking down my formula to make it fit in one cell.
Right now, the way i have it, it spans across (7) different cells to get the results i desire. Is there a way i can make this shorter?
A11 – This is where the decimal value of a number is inputted.
B11 – This is the final display after running A11 through the formulas below
Here are my formulas: ...
I have a table set up that calculates feet and inches. My problem is that if I have an answer like 2'-0 3/8", it suppresses the zero. I tried setting the format up like ##"'" ##"''" ?/? with no luck.
View 2 Replies View RelatedI need a formula to automatically convert inches to square feet. I have =IF(G5>12,G5/144). and G5 is the cell used to enter your inch value. The formula wrks great, but only if you enter over 12 inches. I'm pretty sure Im on the right track, just need to know how to add in the part about if its less than 12 inches it should be multiplied by 12.
View 5 Replies View RelatedI'm trying to get the following formula to give me a result with the inches " symbol on the end.
=IF(SPECS!B2="K1318","1.388",IF(SPECS!B2="K13518","1.985",".950"&""""))
So I want either 1.388" or 1.985" or .950". The current formula will only give me .950".
believe this is a simple formula I just cant seem to get it right. Example: H1 has 859.375 and I need H2 to be 71' 7 3/8
View 5 Replies View RelatedFormula (or a chart) for converting centimeters to inches.
View 1 Replies View RelatedI am new to Excel but not programming and I am looking for a recommendation for the following. I have a spreadsheet that simply takes the length and width of an area and computes the square feet and yardage and other sundry items. I am entering the feet/inches as follows:
Example: 11.3 (equals 11/ft 3/inches)
The correct decimal conversion should be 11.25 but, obviously, it does not know that the number to the right of the decimal point is an indicator of inches. (ex.: .5=.42, .7=.58, .9=.75, .11=.92)
I have approached this from the stand point of an IF condition, finding the position of the "." and grabbing everything to the right (+1) but I understand that the limitation is 7 nested IFs.
Can someone get me kick-started on what the best approach would be to get my entry to convert to the true decimal equivalent? Currently, I am simply doing the conversion from memory but I would rather automate this sometimes errant approach.
This is a continuance of the Q and A below. Except the answer below converted a decimal like 1.44 to and answer like 1' 5.28".
except the final format I am after requires the 5.28" to be fractional such as:
1' - 5 1/4"
Is there a formula for this format?
How the heck to work with comboboxes and listboxes.
In entering column widths, I want to do inches. I understand inches. I don't understand points.
The instructions say that it will take whatever is in the User Control Panel: Regional: Number settings. I checked. It is US system. Not points.
MSO 2010. Can I change it to inches or do I need to get used to points?
I did my search, but cant find and knows what key search to look/type for...
If i have data A1 through A10, such as 1 1 2 2 2 2 3 3 3 3
How can i get column B1 through B3 as 1 2 3 ?
I have to make a excel document in which I have length and width in feet and inch format.
E.g. 10.01 in which 10 is feet and .01 is inch
I have all the length and width values in the above format. And what I want to do is convert the inch value (10.01) to feet value (.01=.08 feet) .
Just like the calculator here does.. [URL] ........
Like
10.01=10.08
10.02=10.16
10..03=10.25
...and so on...
Here is table of conversions from inches to decimal feet. But I don't know how to get a formula for this in excel...????
Inch Decimal of a Foot
1 inch 0.0833
2 inches 0.167
3 inches 0.250
4 inches 0.333
5 inches 0.417
6 inches 0.500
7 inches 0.583
8 inches 0.667
9 inches 0.750
10 inches 0.833
11 inches 0.917
12 inches 1.000
I have problem with function, I have array with random numbers in cell G1 and columns with X in some of the cells, now I want to check the cells with numbers from cell G1 in column F to see is there X or not if yes count if not do nothing. In attached example result should be 3.
View 7 Replies View Relatedhow to explain this except by showing it, so I explained it as best I could in the attachment. Anyone think they have a solution for this? Let me know if you need more information. Thanks!
the macro will look at the value I entered in cell A1, then find all instances of it in Column A
in every row that A1 matches, if the value in column E is "0", I need the macro to change the value in column E of that row from "0" to (that row's column B * $B$1)
I need a formula to convert:
3.759 to 3' 9"
3.974 to 4'
4.005 to 4'
I have this currently:
=INT(D9)&"' "&ROUND(TEXT((D9-INT(D9))*12,"#"),0)&CHAR(34)
However, 3.974 returns 3' 12" and 4.005 returns a #VALUE error. I'm picky about the spaces. I'd like it formatted as I have it now.
I am currently working on cut sheets for my current project. I need to take my decimal feet (ie 1.55) and display them as feet and inches (1' 6 5/8") not (1' 6 3/5")
I have a formula which is this
=INT(F17)&"' "&TEXT(12*(F17-INT(F17)),"# #/#")&CHAR(34),
It works but the problem is the fractional inches 6 3/5" i need them to display in 1/8 1/4 1/2 when applicable. Is there something i could add to this formula to make my inches read like a measuring tape (1' 6 5/8") 1/8 1/4 1/2??? I attached the spreedsheet for review.
Question.xlsx‎