I want to highlight an entire row based on the contents of of a particular cell. For instance, if c4 contains data, highlight the entire row 4. If c5 is blank, do not highlight the entire row 5...and on and on...
View 2 RepliesI need to make an entire column formatless if the cell in row 3 contains no text. I want the whole column to just appear like a normal formatless column, but if there is text in the row 3 cell, I want it to be the way I have it formatted right now.
View 1 Replies View RelatedI have a large workbook with 2 rows of data I want to format (R25:R530, M25:M530). Row M is already populated, row R is new data that I am entering. When the value of a cell in row R is larger than its adjacent cell (R25:M25) in row M, I would like the font to turn red. When the value is smaller, I would like the font to turn green.
With the amount of time I've spent attempting to conditionally format, I could have gone through and formatted each cell individually by now!
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
I want to add a Conditional format to my vba. I've got 2 columns with dates in it and I want to highlight the whole row if the date it greater and less then todays date
I'm looking for
for all active cells
column date 1
=$j2<$L$1 blue for less (this data then tells us thats it's unacknowledged)
column date 2
=$K2<$L$1 red for less
=$K2=$L$1 red is the same
(this data then tells us we need to chase these items)
I can't figure out to place conditional formatting on a range at each change in cells in column A....ie. in column A, several rows will have the value "1", then several will have the value "2", all the way through "52"...sometimes there could be 4 rows with the same value, otheres there may be 5, or others even only 1.....so I need conditional formatting that says each time the value in column A changes, highlight all cells in that row one color and change that color at each change. Does that make sense?
View 7 Replies View RelatedI've got a pivot table that shows different activities their cost, budget and percentage complete amongst other things. I would like to use conditional formatting to turn the font of a whole row grey if that activity is a 100% complete (exactly more then 99,5% complete in this case). I can do this with conditional formatting by selecting the individual rows and then setting the conditions. Example: selected row =$45:$45, Formatting condition =$J$45>99,5%.
However I've got 1500 rows to do....how can I set this condition for all rows in one go?
I found code that I would like to use conditional formatting code as shown here. Here is the code just in case:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("A1:A10")) Is Nothing Then
Select Case Target
Case 1 To 5
icolor = 6
Case 6 To 10
icolor = 12
Case 11 To 15
icolor = 7
Case 16 To 20
how can I get this code to work across the entire workbook and not just for the specific worksheet? I tried pasting the code into the This Workbook under VBA Project and changing the Private to Public but no go.
With the click of a toolbar button, I've got my vba inserting a new tab, renaming it, inserting headers and now working on the code to insert all the formulas needed in 12 columns to copy down as far as there is data.
The 4th column D is the hardest. Currently, I'm using manual "Conditional Formatting" to colorize the cells in Col D but need the VBA to place that "Conditional Formatting" code into the sheet so that when the sheet is created, it will hold the conditional formatting feature.
Specifically, the formulas I'm using in the Conditional format wizard are:
Formula: =$B2$D2 then turn the cell red Applies to: =$D$2:D
Copy down (in other words, the colorizing should work all the way down Column D as long as there is data in Col D.
How to write a VBA that will, if the value of a cell in column "U" is TRUE, that row's FONT (for the row the TRUE cell is in) will turn red.
View 4 Replies View RelatedI'm afraid as its a multiple conditional format and thus needs coding. At the moment I'm using the following
Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions
Dim rng As Range
' Target is a range::therefore,it can be more than one cell
' For example,,someone could delete the contents of a range,
' or someone could enter an array..
Set rng = Intersect(Target, Range("E27:E34,G27:G34,I27:I34,K27:K34,M27:M34,O27:O34,Q27:Q34,S27:S34,U27:U34,W27:W34,Y27:Y34,AA27:AA34"))
If rng Is Nothing Then
Exit Sub
Else.....................
This works very nicely, so that for example if I type the number 10 into cell M33, that cells fill colour becomes black (and the text turns white). Alas I would now also like to extend the fill and text colour to the cell one to the left too. To take this example I would type 10 into cell M33 and cells L33 and M33 would both be filled black and their text would be white. I'm not sure if this requires a change to the code, or if its possible to just have a formula or something which copies the fomatting of one cell into another
Looking to use conditional formatting to highlight a cell based on the value of another.
I.E. Highlight Cell B2 if Cell A3 is 4 or greater.
Is it possible to format a cell based upon the format of another cell? For instance, if the cell to the left of a target cell is bold, is there a conditional formatting cell that can be used so that the target cell is bold as well?
View 8 Replies View RelatedI have two cells. both formatted to contain dates.
cell a1 will have a date in it. cell a2 will have a date calculated to be cell a1 + 42 days.
now, when cell a2 reaches a date that is greater than cell a1 + 42 i want cell a2 to be formatted as fill red.
so, i have tried a conditional format as =a1+42 >=TODAY() but it always highlights as red even if the value in cell a2 is less than cell a1+42.
I have set 3 conditional formatting rules where the row from column A to K will change depending on the value on column L.
Selection is equal to A3:K100, conditions are similar to:
- Formula is =$K3="PIP"
Then for formatting I chose WHITE BOLD FONT & BLUE SOLID PATTERN, for example.
Conditional formatting only allows 3 conditions. If this can be replicated
using VBA, then you can set "n" conditions, correct?
i m trying to format a cell so that it colours in red when a specific text is chosen in another cell, ive tried conditional formatting but I cannot get it to work. e.g column A has a drop down list, if GB or IEN is chosen in that cell then cell in column K will become red. (as if these two are chosen then they have to input a number into column K). Once they have inputted the number into column K i want it to go back to its original format. Or if they dont select GB or IEN then it would stay in its original format aswell.
View 2 Replies View RelatedNot very good at this but I have the basic sheet attached. All I want is a way to highlight the first cell when the date is within 30 days of the "Due date".
Calibration Record-example.xls
I am working with the Conditional Formatting, which is fine for one cell. Here is what I am trying to do: IF cell in $A1 = 1 then bold $B2:$M2 and apply solid line border to top of cell ranges. I have tried conditional formatting but it only formats the cells in column A. And I can't seem to find a BOLD statement for the cell formulas.
View 2 Replies View RelatedMy cell has a 'P' or an 'F' plus some additional text. I'm trying to change cell color based on the 'P' or 'F' but I can't get it to recognize the letters.
Samples of what I've tried:
=IF(LEFT(L23,1)=P)
=IF(MID(L23,1,1)=P)
etc.
I can 'FIND' the 'P' or 'F' but there may be a P or F else where in the cell so the color may come up incorrect. I'm trying to get it to just look at the first character in the cell. Can the 'IF' be used with CFs?
I have a large spreadsheet which includes many rows whose number format needs to change depending on the value of a specific cell.
So for example:
If cell B20 has value "A", cells Q20:AG20 should display as 1,234
If cell B20 has value "B", cells Q20:AG20 should display as 5.6%
If cell B20 has value "C", cells Q20:AG20 should display as 7.89
Etc...
As conditional formatting does not seem to include a number format option I've worked out that I need some sort of macro to change these settings for me, either automatically whenever the value of B20 changes or, more likely, when I manually choose to run the macro.
conditional format formula that is based on a text range within a cell. In my case, I would like to compare the low and high range when inputted as a number followed by the quotation marks followed by space then hyphen, space then number and ending in quotation marks. The quotation mark is being used to represent inches.
Like this in cell D14: 0.2” - 2.2”
I am using the following condition format formula which works for the strict case above.
HTML =OR(D16<LEFT($D$14,3)+0,D16>MID($D$14,8,3)+0)
However, there will be times when users using this spreadsheet may leave out the spaces on either side of the hyphen, or add more than one space between the number and hyphen. Also if additional digits are added, my formula above does not include all the digits in the results. I prefer to leave the quotation marks in...........
I am looking for a method to conditionally format a variable number of cells below a single cell into which data is entered.
For example ABC = 6, DEF = 12. Therefore, if I enter ABC into D1 then D1:D6 should be conditionally formatted.
Can I conditions format a cell based on data from another cell?
View 8 Replies View RelatedI would like to format the color of cell A1 on Sheet 1 based on true or false values from cell range A1:A10 on sheet 2. For instance:
1. If all cells on sheet 2 in range A1:A10 were false then cell A1 on sheet 1 would be red.
2. If some cells on sheet 2 in the range A1:A10 were false and some were true then cell A1 on sheet 1 would be yellow.
3. If all cells on sheet 2 in range A1:A10 were true then cell A1 on sheet 1 would be green.
I am trying to apply conditional formatting to one cell based on the values of cells in a row.
This is what I have at the moment
E3 = TODAY()
E4 = TODAY()+90
If any date in the row falls between E3 and E4 i would like the font in another cell to turn red (in the example below A11 should turn red if any date in B11:J11 is between E3 and E4).
This is the formula I've been trying:
=AND($B$11:$J$11>=E3,$B$11:$J$11=E3,$B$11
Code is trying to
1. Where there is data in column B
2. Goto first row of data
2. If column J = "Closed"
3. then select Cells from column B to J in that row and colour these cells in red
4. If column J= "Open"
5. the select Celss from column B to J in that row and colour these cells in grey
4. Repeat for next row until you get to cell in column B where there is no data.
Recieve run time error 1004: Method 'RAnge of object_GLobal failed
===============================================================
Sub Colourclosed()
Sheets("Risks").Select
Dim LastRow As Long
Dim i As Long
LastRow = Range("B" & Rows.Count).End(xlUp).Row
For i = 8 To LastRow
If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select
Selection.Interior.ColorIndex = 3
[code].....
Note: I've managed to do it for one cell ie for Column B by replacing "If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select with "If Range("J" & i).Value = "Closed" Then Range("B" & i).Select" This works but only colours in cell in column B, how do i do this so it colours range of cells
I have been trying to find a way of formatting an entire row based on the contents of cells in each column. However i come unstuck when trying to make the column dynamic. Below is an example:
Month
2010
2011
2012
[Code]....
The idea is that i say current year is 2011 and all rows where C contains an a will turn green. What i would like to achieve is that when i change current year to say 2012 the conditional formatting adjusts so that it looks at D instead of C.
I am trying to apply a conditional format to an entire row based on the presence of any value in the first cell of that row to format to a certain color. If there isn't something present in the first cell, I don't want it to change.
Everything I keep trying ends up highlighting the entire workbook.
I would like to apply the rule to the entire sheet but only have it highlight the rows which have a value/text in the first cell of each row.
I am assuming I should use the formulas selection for conditional formatting but I'm unsure of what formula would apply to this type of request.
I have five fields that have a conditional format applied to them: (see attached).
Columns J, K, L, N and O. These conditionals highlight if a minimum number is entered. Ex. Minimum pushups for a 30 y/o male is 27, if a 26 is entered it highlights red. The total score (where I need this to perform) is calculated in column Q. It will format red if the total score is below 75 but what I can't figure out is how to make it format if any of the previous minimums have not been met.
Ex. In cell L4, his crunches were 25 (a automatic failure -- red formatting). Now the total score is above 75 so it calculates as passing (green), but I need it to highlight red regardless because of the minimum not met in cell L4.
I want to be able to change the font color of the numbers in a column based on even or odd. I selected the columns and formated them to all be blue... thats the color I want for even, but now I can't figure out how to set a condition that checks for odd numbers and changes them to red. I now have a count of even/odd for all records, and even/odd for the last 30, this provided some very interesting results.
View 9 Replies View Related