I currently have a thermometer chart in Excel 2013 that I set up with percentages along the Y-Axis. The thermometers are showing spending based on a budgeted number. Currently, the project is over-budget so I have adjusted the thermometer scale to go far beyond 100%.
I would like to have the percentages past 100% show in red along the lefthand side.
I am trying to format the colour of a column chart based on the value of the x axis (not the y axis value). Firstly I need to know if it is possible. Secondly I would appreciate any hints / VBA code that could be useful.
View 4 Replies View RelatedI had created a pivot table and pivot chart for the data, the pivot table shows the row label's as percentages which is correct, but it when comes to the pivot chart it shows it as decimal, for example a 10% shows 0.1, I tried of formatting the x axis and choose percentages but it doesn't want to change.
View 6 Replies View RelatedI realize all the numeric data was originally not in percentage format (a simple division without being multiplied by 100). So when I set the vertical axis to percantage format, it does display it as a percentage but with the "%" sign. Is there any way I could get rid of the sign? It's not necessary as the axis has already been titled accordingly. I'd hate to redo all calculations, multiply by 100 and then create new charts only to get rid of the sign...
View 1 Replies View RelatedI created a bubble chart whose x-axis and y-axis show every 10th value between 0 and 100 (i.e. 0, 10, 20, 30...). The axes intersect at (50, 50) to create 4 quadrants.
I want to erase/hide the values on the axes (i.e. the axes will no longer show 0, 10, 20, 30... and at the same time, the bubbles will still be in the same place) to create 4 blank quadrants and make my bubble chart easier to look at.
Attached is a chart I am trying to create. So basically, I originally used a line chart but it didn't have the flexibility of the scatter chart, but i am having a very hard time formatting the X axis. First of all - I would like the line in the middle at the 0% point to actually go to the bottom so that the x axis labels aren't in the middle of the graph. Second the x axis labels aren't showing up correctly. They should be quarters: 1Q:02, 2Q:02, 3Q:02, 4Q:02... Finally, how can I show the correlation between these two data points plotted - the R-squared. THANKS!!! Auto Merged Post;I actually was able to figure out most of what I asked. What is remaining: how do I calculate the R-Squared on the chart? Isn't there a way to do it automatically in excel on the chart.
View 3 Replies View RelatedWhy the recorded code doesn't work? I recorded the code below to format the Y-axis values of a chart with the recorder.
Code:
ActiveChart.Axes(xlValue).Select
With Selection.Format.TextFrame2.TextRange.Font
.NameComplexScript = "Arial"
[Code].....
I have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
I need a conditioning format formula. If cell A2 is less than 50% of cell A1, then highlight red.
View 2 Replies View RelatedUsing conditional formatting to make all the cells that contain numbers and are formatted to percentage format make display in red color? let's say I want to set this conditional formatting rule initially after just opening the excel book and afterwards when I type in values/text etc. into the cells I want the cells where I have input numbers and chose the percentage format to come out in red color? and all the rest stay in black color?
View 6 Replies View RelatedUsing conditional formatting i am trying to write a formula that changes colour on the percentage difference of another cell.
An example would be if cell A1 contained a target of 5% in cell A2 would be an actual. If cell A2 is equal to A1 or better then it would be green. If cell A2 was within 10% less of A1 (i.e 4.5%-4.99%) then amber and red for the target minus 10% (i.e <4.49%)
I want to do this as a conditional formatting formula as the target figure will change but 10% difference will remain the same.
I need to have a conditional format that will adjust based on percentage ranges.
1% to 25% would be shaded red
26% to 50% would be shaded Orange
51% to 100% would be shaded Green
I was hoping to reference another cell and have the formatted cell reflect the conditional format. I dont think that's possible, so I can include a percentage in another cell and have that highlighted.
I have a spreadsheet with golfers handicaps, golfers names down the left in column A in rows 3-35. Row 2 has the event numbers titles 1 to 18 (18 events in a year). i need a graph that has the person as the vert axis and the horizontal axis needs to be the event numbers, so i can read down for the person and across to see how there handicaps change from each different event. i have attached the data below.
View 1 Replies View RelatedI am trying to get a row of cells to highlight a percentage based on a date range
Below is an example of what my spreadsheet will look like, very simple for managers to read and understand but I am stuck on how i can get this to display the right way.
In the example i would need the Jan column to colour for a certain percent for 21 days and continue to feb for 26 days. Im not sure if this makes sense but this is what they are asking for. Colour bars to simple show the percent of days off each month.
Name Start Date End Date Jan Feb Mar
Dale 11/01/14 26/02/14 21 days 26 days
I have attached the spreadsheet for an example : Book1.xlsx
I have some numeric data that has to be put on a log chart. but there is no option for log charts. so i converted my data to log and then drew a chart but i am unable to edit the axis intervals and starting axis value. whenever i change the value it gets back to its default value,ie 1. can anyone tell me how to draw log chart or how to edit axis intervals and starting axis value?
View 6 Replies View Relatedhow to incorporate another category and value axis to my existing chart.
1. I need to add a rank axis derived from my data column (C6-C15). This column should rank from highest to lowest and create a tie if any number is repeated. I have arranged the rank column in cells B38:L38 as they would appear. I would like this to appear on the top or bottom of the bar graphs.
2. Second I need to add the frequency of hits which = 3 derived from cell J1 This should appear on the chart were it is currently titled. This should create another bar graph colored green and labeled 3.
3. Lastly the numbers axis can remain the same as it appears on the chart or if it would be better to align as shown in cells B43:L43.
What is the best way to have both horizontal and vertical axis as value axis?
View 2 Replies View RelatedI have a number of bar charts for which I'd like to colour the bars blue if the associated value is greater than zero and red if less than zero.
Is it possible to get Excel to assign the colours accordingly, in the same way as it does with conditional formatting in worksheets?
I have a Pivot Chart with 5 data series requiring 3 different formats.
Data: In my Pivot Table I have the following Fields - Type, Year, Month, Sales.
The Years are always the most Recent 2 Years (Currently 2011,2012).
The Months are, well, the Months Jan Through Dec.
The Sales are 'Number of Sales in The Period'
The Type is one of 3: Sales, Cumulative Sales and Change.
Sales has a field for every month in 2011 and 2012, the same for cumulative and finally, Change has the difference between 2011 and 2012 sales for each month.
Now when I plot these on the chart I have
Sales 2011, Sales 2012 Plotted as a line chart on the primary axis,
Change Plotted as a bar chart on the primary axis, with invert if negative formatting,
Cumulative Sales 2011, Cumulative Sales 2012, Plotted as a line chart on the Secondary axis. With the same colours per year as Sales, but as a Dashed Line.
I want this formatting to remain static as the data updates, and if possible when the series changes name (which i'm not sure is possible) because, come January the data series will be 2013/2012 not 2012/2011.
With the other formatting is seems to sometimes stay static and sometimes just decides to reformat everything and switch axes and i'm not really sure why.
Is it possible to aply conditional formating in Chart. for eg. my data in is below format
MonthNo of PO'sNo of GRN'sJan23444443Feb34343453Mar45425566April19002123Average PO's3055Average SO's3896
Now I want a Coloumn chart in which line changed to Red color which are below average. Currently i have to do manually change in it. Is it possible to change column chart color as per condition.
I have the table: chart1.png
If the bubble size is 0-5, I need the bubble color to be green
If the bubble size is 6-15, I need the bubble color to be yellow
If the bubble size is 16-25, I need the bubble color to be red.
So, right now my chart looks like this: chart.png
As you can see the top bubble is the right color, but based on the bottom bubble value, it should be green.
How do I make this change colors dynamically based on the bubble size value?
Hey Guys- I'm not sure if this is even possible but I need some help. I have attached a file below similar to a gantt chart. I need help with the conditional formatting, as I have manually changed the colors to match what I need automated.
Basically I have 6 tasks and I need to change dates for individual projects but I also need the corresponding color to also change.
I have a horizontal bar chart in which some of the bars represent positive values and others represent negative values.
How to format the bars so the "positive" bars are shaded in one colour and "negative" bars in another colour? I'd prefer not to change the bar colour manually as the values change frequently.
I have 60 days of data, Nov 1st through Dec 31st.
The date is my x-axis labels.
I produce a daily report. I'd always like for the current dates vertical bar to be "red".
Is there any easy way to have this accomplished?
I am looking for the best way to use conditional formatting in a Gantt chart. I want the cells to turn blue if they fall between two dates.
View 4 Replies View RelatedI am trying to format the colors of the bubbles on my bubble chart to Green (>5), Yellow (4-5), or Red (<4) based on the value used to create the bubblesize.
The problem that I am having is that .BubbleSizes is property of type String, not range like .xValues, or .Values. So instead of pulling in the value, I am pulling in the reference and getting a "Type Mismatch" Error. The reference of my data for .BubbleSizes is $D$5:$D51. Each row is it's own series and the list is dynamic, so I need to be able to support future rows without a lot of maintenance.
Here is the code that I have so far.
VB:
Sub DataSeriesFormat()
'
' DataSeriesFormat Macro
' Format Data Series based on defined parameters for Green, Yellow, and Red. Created by Derek Steinmetz 7/24/12
'
Dim x As Integer
Dim val As Variant
Dim Green As Range
[Code] ......
How can I add missing values to the axis in a pivot chart line chart? I have a numerical X-axis with values such as 0,1,5,8,14, etc. I have another set of Y values that correspond to the X values. If this was an XY-scatter plot I'd be able to plot X vs. Y and connect the dots for "gaps" in the X values. Since it's a pivot chart I cannot use an XY-scatter plot, I can only use a line chart. The line chart doesn't give me the ability to add the "missing" values, so it gives the impression that my data is more closely packed than it is. The data source is external to my spreadsheet, so I cannot add the values before creating the pivot table/chart.
View 1 Replies View RelatedI got a set of data which is only 2 colums collecting data problems. The output i get is a time stamp and a fault. Im looking to set a chart up with the time been on the X - axis and number of problems per hour on the Y - axis.
View 7 Replies View RelatedIn the attached file I have the data which shows me the market size in value, my market share in value & I did a calculation to get the percentage. What I need is a chart that shows me the market size in column graph, my market share in line graph and I want the percentages to be showing also.
View 3 Replies View RelatedI have some simple data and i want to create a horisizontal bar chart with 2 axis (X axis) the top one showing number of stocks number up to 270 and the bottom with Market Cap up to 1,200. (See attached). I set up the chart and it looks fine but it has only one axis so in order to create a second axis i right click on the blue series (no of Stocks) and go through the motions of setting up a secondary axis. However when i do that it ends up looking like the chart to the right with the Bars Cojoined (which is not what i want) I cannot seem to achieve 2 axis with separated bars
View 3 Replies View Related