I need to have a conditional format that will adjust based on percentage ranges.
1% to 25% would be shaded red
26% to 50% would be shaded Orange
51% to 100% would be shaded Green
I was hoping to reference another cell and have the formatted cell reflect the conditional format. I dont think that's possible, so I can include a percentage in another cell and have that highlighted.
I have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
I need a conditioning format formula. If cell A2 is less than 50% of cell A1, then highlight red.
View 2 Replies View RelatedUsing conditional formatting i am trying to write a formula that changes colour on the percentage difference of another cell.
An example would be if cell A1 contained a target of 5% in cell A2 would be an actual. If cell A2 is equal to A1 or better then it would be green. If cell A2 was within 10% less of A1 (i.e 4.5%-4.99%) then amber and red for the target minus 10% (i.e <4.49%)
I want to do this as a conditional formatting formula as the target figure will change but 10% difference will remain the same.
I am trying to get a row of cells to highlight a percentage based on a date range
Below is an example of what my spreadsheet will look like, very simple for managers to read and understand but I am stuck on how i can get this to display the right way.
In the example i would need the Jan column to colour for a certain percent for 21 days and continue to feb for 26 days. Im not sure if this makes sense but this is what they are asking for. Colour bars to simple show the percent of days off each month.
Name Start Date End Date Jan Feb Mar
Dale 11/01/14 26/02/14 21 days 26 days
I have attached the spreadsheet for an example : Book1.xlsx
Any way write a conditional format formula to shade a cell based on two ranges.
Here is what I need:
cell b4 should be colored in if n4:xfd4 = today's date AND n3:xfd3 = "Time Off". The part I am having trouble with is that it should only shade if today and time off are in the same column.
Here is an example:
This one should shade B4(note: Today is 08/13/2013):
time off
late
08/13/2013
08/10/2013
This one should not:
late
time off
08/13/2013
08/10/2013
This is what I came up with so far, but it shades the cell if either show up in the entire range:
=AND(MATCH($G$1,$n$4:$XFD$4),MATCH($H$1,$n$3:$XFD$3),1)
Note: g1 contains =today() and h1 = "Time off"
So formula is wrong.
i edited this thread becuase I realized why I was getting the wrong results, however, I am completely clueless on how I need to accomplish the task below.
I need to apply formatting based on five named ranges on another sheet. if the values in cell F1:F1000 appears in the named range "datestore" and the corresponding value in range h2:h1000 appears any of the named ranges "date1" through "date5" I would like it to fill the cell yellow.
Using conditional formatting to make all the cells that contain numbers and are formatted to percentage format make display in red color? let's say I want to set this conditional formatting rule initially after just opening the excel book and afterwards when I type in values/text etc. into the cells I want the cells where I have input numbers and chose the percentage format to come out in red color? and all the rest stay in black color?
View 6 Replies View RelatedI currently have a thermometer chart in Excel 2013 that I set up with percentages along the Y-Axis. The thermometers are showing spending based on a budgeted number. Currently, the project is over-budget so I have adjusted the thermometer scale to go far beyond 100%.
I would like to have the percentages past 100% show in red along the lefthand side.
I am trying to apply conditional formatting to the range K60:R82 based on their corresponding cell in the range K87:R109 (the arrays have the same size). If each cell in the first range is greater than their corresponding cell in the 2nd range, then the cell in the first range should be formatted with pink fill and red text.
View 2 Replies View RelatedIn Excel 2007, is there a way to copy a conditional format from one cell to a range of cells. My conditional format is comparing the value of one cell say A1 to B1, and formatting the cell if the value is different. How do I copy this format to also compare A2 to B2, and C2 to D2 etc.
View 2 Replies View RelatedI have a list containing blocks of stock price values with each block representing a series of values at a given time e.g
1400 156
1400 99
1400 74
1400 86
1400 256
The number of entries may vary for each block but is never more than 60. the next block may be e.g.
14:05 15
14:05 42
etc
and down a very long list of around 65000 entries. I'm looking for a routine that will add up all the values in each block and calculate the total for that time block. I then need to fill in an adjacent column with the perecentage that each value is of the total. A completed block may look like;..............
I have a sheet (example is attached) that lists multiple jobs and their related tasks. I want to know if it's possible to create a conditional formatting that says if the percentage complete under the "task" is under 100% and within X number of days of the target date, it's red/yellow/green.
So, if a target date is 70-100 days out; 0%-10% - RED, 11%-45% - YELLOW, 46%-100% - GREEN
If a target date is 40-69 days out; 0%-45% - RED, 46%-75% - YELLOW, 75%-100% - GREEN
If a target date is 20-40 days out; 0%-60% - RED, 61-90% - YELLOW, 91%-100% - GREEN
If a target date is 0-20 days out; 0%-85% - RED, 86%-95% - YELLOW, 96-100% - GREEN
If a target date has passed, Anything under 100% is RED.
I have a worksheet with 30,000 rows. But sometimes even if I have fewer records in this worksheet(lets say 1000) worksheet shows the same 30,000 rows.And its annoying when you try to navigate using vertical scroll bar. Is there any option to re-adjust the worksheet to make it more user friendly based on number of rows in current sheet.
View 2 Replies View RelatedIs it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
the dynamic name ranges I had created did not "adjust" in their position references when I added new name ranges later.
My workbook (see attachment) Master sheet has several name ranges that are based on their position to a key name range I set up..."Unit". Example below:
"Unit"
i can't seem to figure this one out.
I attached a file showing how i am trying to format data (the second tab).
The big issue is the counting to format. (the formatting itself is obviously easy.)
The number of columns is not always standard so i need to count for it.
the number of rows in each "room number" is also not always standard, which means i also need to count for those.
If anyone has had experience trying to do something like this i would appreciate the help.
i know it is possible because i had one that someone had given me years ago, unfortunately i lost it in a hard drive failure...also years ago.
if it isn't obvious what i am trying to do, let me know and i will try to be clearer.
Range("B25").Name = "EndMull"
Its fine but if i insert a new row or column then it mucks the whole thing up. Is there away of naming them but if any cells, row or columns are inserted the range will automatically adjust to suit1
I currently have a spreedsheet which has a conditional formatting cell where if the figure is above 1 is green and below red what i am trying to do is get a sum to calculate based in its color?
I.E. I have a value in cells F7+F25+F27+F29 i then have a value in F17 but only want this to be included in the total calcualtion if the figure in E15 is equal/above the value of 1.
In Excel, I want to do conditional formatting on a cell based on the value of another cell. For example: in cell A1, I have text. I want this cell to have a grey background if the value of cell B1 is less than or equal to 1/31/14 and to have no fill (default) if it is greater than that date.
View 8 Replies View RelatedOn the attached worksheet I'm looking for the squares in F4:F6 to be coloured corresponding to the colour names in D4:D6 using conditional formatting. I just can't get it to work today.
View 1 Replies View RelatedI have a worksheet which has the years 2001 to 2013 on in row1. I am trying to find a way of highlighting the entire row in green if a specific year contains an "a" (Marlett, tick). The complex part is that I would like the specific year to be determined by an entry input into cell A2 on sheet 2. See Attachment for reference.
View 2 Replies View RelatedI am working in a table where I would like the whole row to highlight based on the value in one of the cells. These rows of data will be updated regularly, so the formatting has to change with the data.
View 13 Replies View RelatedI want to create a conditional formatting based on a cell in a row. If the value of that cell is greater than or equal to $20 the entire row would be highlighted with a color.
the main thing is that the cells in the rows have if formulas that supple the data for the cells. The cells will be blank if nothing is to be displayed but they will still contain the formula.
I want to format a cell conditional on the value of another cell. I have read numerous threads on the topic and no matter what I do, it doesn't seem to work for me. I've made it a simple as possible by creating a new workbook and entering:
A1: 5
B1: 2
C1: Some random text - this cell has the conditional formula: ="A1>B1"
However, the cell doesn't get formatted. Here is a screenshot and here is the simple workbook.
I want to color format a cell based on a percentage value in another cell but I just can't get my head around how to solve it. I've attached a file that explains it better.
E.g.
The formatting for A1 should be something like:
If A2 is
> +/- 10% RED
+/- 6-10% YELLOW
+/- 5% GREEN
Attachment 214464
I am trying to do some conditional formatting to highlight rows based on several conditions, I don't know if this is possible, but these are the criteria:
AAPL
tt
10/1/2013 11:14:15
GOOG
ll
10/1/2013 11:14:20
[code].....
I want to highlight a row if:
- the difference in time value is < 20 seconds
- the first symbol column is the same
- at least one, but not all of the rows meeting the above criteria contains a value in the second column from a given list (in this example, say tt is on this list)
So if done properly the logic would highlight the first and third rows, but would highlight none if none of the values in column two match my list.
I think the test criteria would go something like this, however I know that there are problems with my row references.
=and(abs($C2-$C3:$C65536)<0.0003,$A2=$A3,match($A2,Sheet1!A:A,0)>0)
I am attempting to apply conditional formatting such that cell B3 is green if it is greater than or equal to cell B2, and red if less than cell B2. Then to apply this conditioning across the row of data (i.e. C3 >= C2 green, C3 < C2 red; D3 >= D2 green, D3 < D2 red; E3 >= E2 green, E3 < E2 red ... etc.). Needs to be formatted such that if I change the value in cell B2, the colour of B3 is automatically updated.
View 4 Replies View RelatedI have a value in column H7 as 2000.
I have columns M to X labeled Jan to Dec. I want to highlight in yellow values in the row M7 to X7 if they are greater than 2000!
Then, I need to copy this conditional formatting down the columns under M to X, but under column H the values will be different, but I still want the same results, values greater than the value under column H then highlight in yellow.
I thought I had the answer but when I tried to copy down, it was making cells yellow that were clearly less than the column H value.
how to create VBA code for conditionally formatting a column of dates that have expired. My unique challenge is that I first need to associate the item attached to the date with the expiration date of a particular group. Therefore, I have to first match the Item label with the appropriate group, and then I need to evaluate the expiration dates of both the Group and the Item. If the Item expires before the Group expires, then I need the Item date to be formatted in bold and with a red font.
Attached is a sample spreadsheet.
Thoughts about how to accomplish this with VBA? By the way, VBA is the necessary approach due to the fact that the data is updated several times per day, and all existing data is erased prior to uploading new data.