I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
I need to change the backcolour of some textboxes on a userform that is populated with percentage figures from a sheet, ie:
10% (a positive percentage) textbox backcolour = red
-10% (a negative percentage) textbox backcolour = green
Below is some code showing my attempts up to now, but obviously I can't make it work.
VB:
Private Sub Textbox1_Change()
If Me.Textbox1.Value < 0 Then
Me.Textbox1.BackColor = vbGreen
Else
Me.Textbox1.BackColor = vbRed
End If
End Sub
I want to populate a textbox (output) on one userform with data from a textbox (target) on another userform.
The data in the textbox (target) is the result of calculations in the userform code and is not gathered from or saved to a cell.
I want the textbox (output) to be populated at "Userform intialize" event.
I have tried various other methods without any success.
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies View RelatedI am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value
Want to tab to next textbox in a userform.
Sample workbook has a userform with 4 textboxes.
When I enter something in textbox 1 and then try to tab to the next box, it tabs within the same box.
Attached sample : Form1.xlsm
i have a tabbed userform, that has 13 text boxes on each ,
how can after i have updated one tab unload to a specific cell in excel ?
textbox1 i need value when i "Unload" to b $F$6
textbox2 will be $F$7
textbox3 $F$8
etc etc
but i have no idea how to do this , i have a cmdbutton on bottom ready to unlaod to excel , can anyone start me off on right tracks
also is there a way to when this sheet is opened this userform is shown
I have this code, which does what i want it to do but i want 5 userforms printed in a4 and 1 in a3, also i want to print them all in colour, as they contain graphs, and visually its poor when in black and white
I added in black and white = false, but it still prints black and white, i tried size = A3 and that wouldnt work either
[Code] .....
I have a number defined print ranges. I wish to create a list of all the named print ranges and then select certain ranges to print in a single document. I have been told can use something called a "userform".
View 4 Replies View Relatedwith printing a long userform? Unfortunately, the me.printform does not print out the whole form. It gets cut off because my form is too long and slightly too wide. I also tried to do a print screen, but unfortunately, because my form is too long, it will only do a snapshot of a portion of the form. In my case, on the bottom as that is where I have placed my command button.
Does anyone know how to bring the whole form out to excel or word? I don't mind doing that as long as I can print out the whole form?
On my excel 2007 UserForm I have a CheckBox with 18 possible or multiple selections of reports (word.docm)
what I would like to do is, when selected they would be sent to printer.
Here's what code I have so far, something is missing, I'm not sure
Private Sub CommandButton2_Click()
For x = 1 To 18
If Controls("checkbox" & x) Then
Select Case x
Case x = 1
worddoc = ActiveWorkbook.Path & "Inspection ReportsCover Page.docx"
Case x = 2
worddoc = ActiveWorkbook.Path & "Inspection ReportsClient Information.docx"
Case x = 3.....................
Is there a code to set the printing of a userform to landscape. The following code is good for a worksheet but doesn't work for a userform.
ActiveSheet.PageSetup.Orientation = xlLandscape
The following adaption of the above brings up an error.
Userform1.PageSetup.Orientation = xlLandscape
I have developed an extensive program running on excell but with the user only seeing userforms. I would now like to build in a "print screen" button, but have no idea how to do this.
What it needs to do is capture the userform and all its entries (as it is displayed on the screen) and send this to the printer to be printed as a picture.
I am assuming that there must be code available so that when ever the user clicks this button, the standard windows (or excell) print screen appears from which he will be able to choose the printer etc.
I have created a userform which user will fill in, but have come up against usual problem of not being able to print a copy. It has scroll bars so can't just use ctrl + alt + print screen method.
Thought i could get around problem, by recreating the form on worksheet by using activeX labels. I use a basic loop that goes through each of the required controls on the userform and exactly recreates it on the worksheet, using Active X Labels.
This all works fine, but when it gets to end of macro, the userforms just disappears and macro stops. No error message!! Also during the process of creating the axtive x labels i can't step through in VBA as it says its uable to break at that point!!
Private Sub NoPRINTBLANK_Click()
Dim percent As Integer
Dim Olob As OLEObject
Set ctrl = TICKSHEET.Controls
pgs = TICKSHEET.COMPS.Pages.Count
pgs = pgs - 1
For z = 0 To pgs
percent = (z + 1) / (pgs + 1) * 100 ' this is for a progress bar on sheet
progresser percent ' this runs small sub to alter progress bar
TICKSHEET.Repaint
Worksheets("SHT" & z + 1).Activate
ActiveSheet.OLEObjects.Delete...................
I know you don't usually print userforms & when you do I know the code, however, how can you print one page of a multipage userform when the page has a vertical scrollbar & you want to print the whole page, not just what is showing on screen?
View 2 Replies View Related1/ I enter manually a list of serial numbers in a column
2/ the latest cell gives the number Y (count) of data entered
3/ I need a macro to perform the following on a Form when I press a button:
a. the form is printed Y times and every times:
b. "Page x of Y" where x increments (Y is the value given by the item 2/)
c. the serial number cell shows values from the list one by one (item 1/)
So, that means I will have Y copies of the form where the page number starts at 1 and ends at Y, and a Serial number linked to the list (page 1 shows SN from line1, Page 2 SN from line 2, ... Page Y SN from line Y).
Is it possible to have a (print)preview shown in a textbox in a userform?
A layout has been made in a worksheet and content is added to some cells through Userforms (textboxes and comboxes).
1 Userform contains a big textbox and a "SEND"-button.
What I would like is to have a preview of the worksheet inside that textbox before they click send.
During this whole proces, the Excel -Worksheet is not visible (to prevent changes being made to the program)!
I'm building a userform (for the first time), and I'm working with a textbox control. I'd like to make it so that when the user clicks in that textbox, the contents is selected, so that if they begin typing, it will type over what is already there.
My question, specifically, is whether or not there is a property I can set to make this the default behavior, and if not - what event do I tie to this action? Is it the "Enter" event?
What I have now, which will probably be unacceptable to my users, is code that looks like this:
Private Sub tbName_Enter()
ActiveControl.Value = ""
End Sub
This makes the contents disappear, but I'd rather they stay there and just become "selected".
I have a userform in a workbook and depending on what selection the user makes from a combo box, I want the data to get pushed into the relevant sheet.
I did think I could get away with
If Me.cmbtype.Value = "Tool" Then
Set ws = Worksheets("Tools")
ElseIf Me.cmbtype.Value = "Guide" Then
Set ws = Worksheets("Guides")
etc but its now not copying data into Tools if I selected Tool from cmbtype (but when I select Guide it does appear to work).
The rest of the code is the same regardless of what type they select from cmbtype, its just which sheet the data gets copied into that changes.
i have a userform with a text box in it a i would like to display all the values in a named range called "emp1"
View 4 Replies View Relatedi have couple of textbox in my userform and i want to limit them for 7 number and one letter e.g. 7777777X.
View 2 Replies View RelatedHow do I get the text to wrap inside the text box? I have the Wordwrap property of the textbox = True.
View 6 Replies View RelatedI have textbox1 through textbox8 and all have a number value controlled by their respective spinbutton. The total of those txtbox's adds up into textbox 9, but I currently have a command button to sum the value. would I would like is textbox 9 to update as I'm updating txtbox 1-8 automatically. let me know if possible
View 1 Replies View RelatedI'm having a problem referring to the value in my text boxes. I'm trying to refer the value in those to certain columns and rows that will be deleted after.
[Code]......
After seaching on this and other forums I have not been able to get an answer to this question. Also I know there are a lot of posts out there that sound like this, but none are the same.
My spreadsheet has multiple userforms, which has multiple textboxes. The textboxes are for dates. I have it set so when you double click in the textbox that it calls a calendar function.
Here is the problem.... After you click ok on the calendar form I want the date to go into the textbox that the calendar form was called from. The only way for me to get this to work is to create a seperate calendar form for each textbox that I call the calendar form from.
I am creating a userform in vba with textboxes. Input (from user) into the textbox is copied to a worksheet in the workbook.
I one text box users will need to type numbers and in another they will need to type letters.
Can the textbox be formatted so it will only allow a number?
Can the text box be formatted to only allow text?