Userform - Default Textbox Values Based On Textbox1's Value
Mar 5, 2010
I have a userform with 10 textboxes which will all contain a time in HH:MM format. Could I have the userform to fill the textboxes with a default value once a time has been entered into textbox1. I would like the default value to be the time from the previous textbox plus 30 mins.
eg. So if I enter 14:00 into textbox1 I would like textbox2 to display 14:30, textbox3 to display 15:00.
If this is possible, could I add a Listbox with the options 1 to 10. Then would I be able to only uses the textboxes based on the number selected in the listbox. So if I selected 2 then just Textbox1 and Textbox2 would have values in them. For 8 being selected then Textboxes 1 through to 8 would be filled.
View 9 Replies
ADVERTISEMENT
Mar 31, 2009
If it is how do I convert the user input for the text box field as number. thx
View 3 Replies
View Related
Nov 22, 2012
I have a userform containing 3 textboxes, to calculate derivatives.
User enters two integers in textbox1 and textbox2; and to textbox 3, I need to transfer these values but with a little issue.
For example, user entered 3 to textbox1 and 5 to textbox2. In textbox 3, it needs to show 3x^5.
For example, user entered 7 to textbox1 and 2 to textbox2. In textbox 3, it needs to show 7x^2.
So "x" and "^" are our defaults in textbox3.I tried to transfer the numbers that the user enters to cells A1 and A2, -I don't know if this works- but I don't know how to call them to change the text in the textbox.
View 2 Replies
View Related
Aug 15, 2009
the macro should begin by loading a form with a textbox.
load UserForm1 'i suppose
then instead
range("b1").value = 60
set 60 (or a value that i like) in the TextBox1 then start the countdown in TextBox1 instead in cell B1
View 4 Replies
View Related
Jul 3, 2014
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
View 3 Replies
View Related
May 22, 2014
I have textbox1 through textbox8 and all have a number value controlled by their respective spinbutton. The total of those txtbox's adds up into textbox 9, but I currently have a command button to sum the value. would I would like is textbox 9 to update as I'm updating txtbox 1-8 automatically. let me know if possible
View 1 Replies
View Related
Jul 3, 2007
Sheet1 has following two columns
----A----------B
01-07-2007---10
01-07-2007---20
02-07-2007---30
02-07-2007---40
02-07-2007---40
03-07-2007---60
03-07-2007---70
03-07-2007---70
03-07-2007---90
04-07-2007---100
04-07-2007---110
Sheet2 has following three cotrols
Textbox1=02-07-2007
Textbox2=03-07-2007
combobox=?
I want to Extract Unique values from column B between date range textbox1 and textbox2 and finally how to add these unique records in combox1
View 3 Replies
View Related
May 12, 2014
it is possible to join the values from two seperate text boxes into the same text box on the same userform?
View 1 Replies
View Related
Mar 21, 2012
In my userform I have a lot of textboxes. When the user clicks "OK" the values of these textboxes are transfered to row 3 of sheet1.
For this I use some of the code below:
Code:
If NaamTextBox.Value = "" Then ActiveCell.FormulaR1C1 = " " Else: ActiveCell.FormulaR1C1 = NaamTextBox.Value
ActiveCell.Offset(0, 2).Range("A1").Select
If GroepComboBox.Value = "" Then ActiveCell.FormulaR1C1 = "" Else: ActiveCell.FormulaR1C1 = GroepComboBox.Value
ActiveCell.Offset(0, 1).Range("A1").Select
If TypeTextBox.Value = "" Then ActiveCell.FormulaR1C1 = " " Else: ActiveCell.FormulaR1C1 = TypeTextBox.Value
ActiveCell.Offset(0, 3).Range("A1").Select
If TypecodeTextBox.Value = "" Then ActiveCell.FormulaR1C1 = " " Else: ActiveCell.FormulaR1C1 = TypecodeTextBox.Value
This goes on for about 55 columns. Also, not every column is used as you can see in de code above.
It seems to me that this is not smart coding, so my question is: can you make this more efficient?
I did find some nice code with uses EmptyRow (find first empty row) but in my case it's always row 3 where de input is placed. After this row follows much more data.
View 5 Replies
View Related
Jul 30, 2014
OK,I have a spreadsheet that prints receiving labels based on received purchase orders that pulls information from an SQL server. The problem is that it is pulling almost 40,000 lines of data to sort and pull at most 30 lines. One of steps is that the purchase order receipt register has a barcode that is scanned into a text box on a userform. Can I use this information to filter the SQL data pull to only grab that PO number? I'm at a loss on where to begin with this. Below is my SQL statement from the Query builder with an example of a PO number input(PO-rma100613).
[Code] ....
View 5 Replies
View Related
Sep 22, 2007
I have a Userform that contains a TextBox. I want the prompt to default to the TextBox anytime the Userform is activated.
View 4 Replies
View Related
Apr 10, 2014
I am developing a form to get the user's name. I want to put some default text in the textbox where the user types their name. I want the form to delete the default text when the user clicks on the text box or after they start typing their name.
Attached is the form and code that runs the form : UserName.xlsm‎
View 2 Replies
View Related
Mar 17, 2012
i am trying to achieve this in the form that currently has Record navigation buttons...
I have Form with 3 TextBoxes. The first 2 textboxes are edited by the user, but the 3rd textbox depends (It can be edited or might not be)...
I have added the default value under change event of textbox3 as textbox3.value="Pipes"
Currently the user cannot overwrite this value (Pipes)... I need to somehow overwrite this value if required, else, the same value should be retained after clicking New button...
View 2 Replies
View Related
Jan 29, 2008
Hopefully a really simple query:
I have a userform with numerous Textboxes and comboboxes for user input - however the end users aren't too PC savvy and I'm ending up capturing "Please Enter NameJohn Smith", "Please Enter Job TitleSales Manager" etc. My original Instructions told them to tab their way through the form, meaning each time they reached a TextBox their input would overwrite the ("Please Enter x") string prompting them for input.
Is there any way to replicate this "select all" on click (globally as there are potentially 50 to 100 textboxes and 12 varients of the form)?
Penfold Auto Merged Post;OK so I've made a little progress:
Private Sub UserForm_Click()
TextBox1.SelStart = 0
TextBox1.SelLength = Len(TextBox1.Text)
End Sub
The above selects all the text in a textbox - I think I need to apply this to the textbox "on click" - however that could be achieved? Then it needs to be generalised - ie:
UserForm1.Controls("Textbox" & variant)
View 4 Replies
View Related
Mar 22, 2013
I am trying to get a particular cell to have normal dimensions when not within that cell, but once opened, contains a default text preferably within a text box format/size.
View 9 Replies
View Related
Dec 11, 2005
On my user form, the cursor blinks in the second text box down.
How do I change it to be blinking in the first (top) text box? This is the first box that data will be entered.
Is this an option in the properties box of the textbox?
View 9 Replies
View Related
Aug 24, 2006
Say you have a userform with 10 TextBoxes, let’s call them TxtN1…TxtN10 and your workbook has 10 sheets, say “Sheet1”…”Sheet10”. Now if one wants to code a procedure to rename those worksheets when the user hits a command button it’s simple enough.
Sub Rename_click()
For i = 1 To 10
With Sheets(“Sheet” & i )
. name = TxtN & i
End With
Next i
End Sub
But now if the user then changes the textboxes TxtN1…TxtN10 to a set of new strings it’s obvious that the following coding segment will not work:
For i = 1 To 10
With Sheets(TxtN & i)
.name = TxtN & i
End With
Next i
It goes without saying that the program will try to select the worksheets with the new name (and they obviously don’t exist yet)…
View 6 Replies
View Related
Feb 2, 2010
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
View 11 Replies
View Related
Jul 25, 2014
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
View 1 Replies
View Related
Oct 12, 2011
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
View 1 Replies
View Related
Jul 27, 2014
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies
View Related
Apr 11, 2008
I have got a userform with lots of controls,
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
View 3 Replies
View Related
Sep 24, 2009
I have a userform with multiple tabs. I have buttons on the excel sheet that correspond with the tabs. How do I get the buttons to open up their respective tabs in the userform?
For example: Button 1 opens Userform-Tab1; Button 2 opens Userform-Tab2; Button 3 opens Userform-Tab3; etc.
Right now they all open the userform, but open the first tab.
View 6 Replies
View Related
Apr 23, 2006
is it possible to remove the default close (X) on a userform? Or maybe some code with a message to insist the user choose a option first
View 2 Replies
View Related
Jan 5, 2010
In the attached file I have put together a userform that contains a drop down calendar in order for users to select relevant dates.
I have two questions:
1 - I've noticed that from creating the userform (04/01/10) the date has remained as this and not updated to the "current date". Is there any way this could be achieved?
2 - Is there any way the code etc. could be manipulated to alter the dates in the Date Entry boxes, based on that entered into the "Rostered Start Date" box.
I.e. If a user was to select 09/12/09 in the "Rostered Start Date" box, the other date boxes would automatically change to that date.
View 8 Replies
View Related
Dec 18, 2006
I am planning to set a RESET(command button) button in my userform,so that user can delete or change all the input data which she/he have been entered,back to the default one that I predefined.
View 5 Replies
View Related
Jun 14, 2008
I am having a little bit of difficulty find ways to effectively incorporate a checkbox panel into a form interface. What I am trying to do is all the user to select using checkboxes which of 31 separate columns will automatically be deleted or not deleted. The method I have been using is to create 31 checkboxes, and then use the value of the checkbox (true/false) to determine a value in an array, which then can be used to delete the column by a separate sub.
However, I am interested in being able to have the checkboxes start checked or start unchecked by values contained in a different array. My problem is that I am unable to reference the checkbox itself until the form containing the checkbox is opened, but at that point I don't know of a way to cause the desired checkboxes to automatically be selected without placing a command button that must be pressed to fill them in. Essentially I want to be able to open a userform that has checkboxes preselected.
View 5 Replies
View Related
May 23, 2008
I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value
View 3 Replies
View Related
Jul 20, 2014
how can I build a userform to display all values from a row? in order to select a row, i was thinking to use a combobox to display values from one column and based on that selection, display all values in that row? the reason i want to use a userform is because i would also like to be able to edit that data.
View 3 Replies
View Related
Apr 25, 2014
When you create a userform in the vba editor, then go to another module, then return to the userform, you see the userform object by default and in order to show the code you have to right-click on the userform and select "view code".
How can I make the "view code" view the default view for the form in the VBA editor? (i.e. so that when the form is selected, I am presented with the code, not the object).
View 3 Replies
View Related
