Array With Button Names, Call Them One By One In A For Loop
May 12, 2009
I am having a problem calling buttons. I have an array with button names and another array with their caption texts and I would like to call them one by one in a for loop:
For i = 1 To UBound(button_array)
Sheets("Statistic").Shades(button_array(i)).Caption = button_text(i)
Next i
But the only way I seem to be able to call them is by their set names, like:
Sheets("Statistic").statistic.Caption = button_text_ENG(i)
View 2 Replies
ADVERTISEMENT
May 14, 2014
Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro()
Dim lastRow As Long
Dim i As Long
[Code]....
View 4 Replies
View Related
Oct 16, 2007
If ComboBox1.Text = " Market 1" Then
StoreNumList = Array ("66", "67", "107", "222") 'obviously array string is much longer than this
For x = LBound(StoreNumList) To UBound (StoreNumList)
StoreNum = StoreNumList(x)
ComboBox1.value = StoreNum
Call btnOK_Click_Process
Next x
Program runs fine first step through. It calls the btnOK_Click_Process sub routine just fine. However on second and subsequent For/Next cycles it does not call btnOK_Click_Process.
View 9 Replies
View Related
May 1, 2008
Two part question:
1) I'm relatively new to arrays, but what I need to do is generate a list of file names and the sheets within each one. I would like to use an array for this, but since I don't have much experience.... well....that's why I'm here. Can someone point me in the right direction?
2) And the second part of this.... I was planning on using the FileSystemObject to determine the files in a selected folder and loop through that list of files, opening each one and harvesting the required info (file name and all sheet names). Should I use the FSO or is there something built into Excel that might be better (and also limit the number of dependencies for this little "project" of mine).
View 9 Replies
View Related
Feb 16, 2007
I have a spreadsheet with a list of names from cell A5 to A? - can be as many as 130 names or as few as 20. I have to create individual spreadsheets with the persons name as part of the filename. I have 3 subroutines which work manually ( CreateFile, LookUp and NewWorkbookSave ) so that I can generate individual files for those users who require them. However I need to be able on occasions to create a full teams worth of files with one click - to this end I need to be able to loop through cells A5 - A whatever and call the Subroutine CreateFile - I enclose the code I have so far
Const Fname = "AON Ver 3,0.xls" 'insert filename here like "AON Ver 3,0.xls"
Const DirName = "\Ukplscs105central repositoryAOMTally SheetsTeam upload Tally sheets"
Const TeamName = "AON" ' insert team Name here like "AON"
Const FilePath = DirName & TeamName
Dim count As Integer
Sub CreateFile()
ChDir FilePath
Workbooks.Open Filename:=FilePath & Fname
Range("C3").Select
ActiveWindow.WindowState = xlMinimized
Call LookUp....................
View 5 Replies
View Related
Jan 30, 2009
I need a code for "click-able button" in my excel sheet that will call makro "copy" which I have connected with ThisWorkBook /Sub copy() .../ or in other case with Modules (module 7 for example).
So, what to add between this:
Private Sub CommandButton1_Click()
?
End Sub
View 9 Replies
View Related
Apr 22, 2006
I have created a command button so that the sheet asks for a password. Now I need to include that in an already created code. I have created a command button as:
Private Sub CommandButton1_Click()
If LCase(Me.TextBox2) = "password" Then
Run "Showall"
Else
Run "Hideall"
End If
End Sub
Can someone tell me how to call this macro in another macro. That is when another macro is running and if the condition fails, this macro should be called. Is it something like run "CommandButton1"?
View 9 Replies
View Related
May 23, 2006
I want to call on a function with a macro/button in the same way as when you choose "insert-function" but in a way that the user himself is able to put in values on the spredsheet.
View 7 Replies
View Related
Jan 10, 2008
Is it possible to call a Forms Command Button procedure from a Module?
View 3 Replies
View Related
Sep 14, 2012
I have a number of modules that I want to call is it possible to call them from an array
For example
myarray = Array("Outstanding_Per_Agent", "Unique_Records")
Call myarray
This doesn't work as it says it expects a sub function or property
Do I need to define "myarray" as something or is it even possible.
View 2 Replies
View Related
Feb 25, 2014
My problem today, is actually being able to call the routines. I have tried to make a generic setup, so that each subroutine to be called is named "Macro_[number here]". So Macro_1, Macro_2 etc. By doing this I am hoping to be able to call all the subroutines using a For Each code.
At this point, my setup looks like this
Macro / Step
Action
Status
Run?
[Code]...
View 4 Replies
View Related
Sep 15, 2007
locate the error in this code.
The error is Compile Error
Sub or Function not defined.
It seems to work ok when enabled from within the Command Button
but when the same macro is called from the button, it gives an error at the first-line following Loop.
The code was pasted in a module as Sub End_Input()
and the button was modified with a Call function to the subroutine.
The button code looks like this:
View 10 Replies
View Related
Dec 27, 2007
I have a control button on a worksheet that is suppose to call a userform. I am using the code
Frm_Customs.show
But I keep getting an error. The button was created from the control toolbox.
View 9 Replies
View Related
Aug 21, 2006
I have two combo boxes that both contain 7-12 separate search criteria for the user to choose from. The other includes months and the other value ranges in text form. Based on the selections, e.g. "August" from other and "increased by more than 5 %" from other, I'd like to have a command button to execute the appropriate macro. I've already compiled the macros for each occasion but I just can't figure out how to get the button to execute them. Can I use the Select Case statements? If so, how?
Oh, and whether it's relevant or not, the boxes and the button are from the control toolbar.
View 5 Replies
View Related
Oct 2, 2013
I want to call a macro with a varying name that is within a module with the same name.
I have a module called Test1 and within this, a macro name called test1
I have a module called Test2 and within this, a macro name called test2
etc
On another module called Test8 (with the macro called Test8), this Test8 macro will call either Test1 or Test2 or Test3 etc depending on what I choose in an excel spreadsheet. So on sheet1, cell A1, there is a drop down with the options Test1 or Test2 or Test3 etc.
The following works to run the macro test1 from module test1 (when it does not vary i.e. i physically put in the name of the macro myself):
Sub Test3()
Test1.Test1
End Sub
The following works to run the macro test2 from module test2 (when it does not vary i.e. i physically put in the name of the macro myself):
Sub Test3()
Test2.Test2
End Sub
etc
However, if I try it so that the calling of the macro varies as below , it does not work:
Sub Test3()
MacroToCall = Sheets("Sheet1").Range("A1").Value
MacroToCall.MacroToCall
End Sub
View 7 Replies
View Related
Aug 2, 2012
I have a named range, "DDNames", on a master data input sheet and in that range are names of donors. In the same workbook I have sheets that provide a quarterly summary of each of the donors. I have named the sheets "Smry_Miller", as an example. Miller's name is in the named range, as well as others, for the format for each summary sheet is Smry_NAME.
I have a few things I want to do on each sheet so I am working on a FOR loop so I can make my code easily scale-able for when we get new donors or lose one. I get a Run-time error: 9 on my code and I'm just down right stumped.
VB:
Sub MakingLoop()
Dim arrAllDD As Variant
Dim i As Long
Dim varDDNum As Long
varDDNum = Range("DDNames").Count
[Code]...
The debug highlights the line "Sheets("Smry_" & arrAllDD(i)).Range("G1") = arrAllDD(i)"
View 4 Replies
View Related
Nov 20, 2012
I have a piece of code from a form command button. its supposed to colect data and put it to appropriate cells.
VB:
FoundColumn = 0
For Each c In Sheet19.Range("A5:A33").Cells
If c.Value = student1.Value Then
'check if date allready exists
For Each cc In Sheet19.Range("c4:nc4").Cells
If Calendar1.Value = cc.Value Then
[Code] .....
I need this for Sheet19 and to 10 more worksheets like Sheet20, Sheet21 etc. I can manually copy paste the code and change the Sheet19 to whatever but it just does not seem the right thing to do. I tried:
VB:
For i = 1 To 6
naming = "Sheet" & i
MsgBox naming.Cells(1, 2).Value
Next i
but that gives an object required error.
View 2 Replies
View Related
Nov 13, 2009
is there a way of looping through all forms that are in a VBA window and return their names and the controls within them?
View 2 Replies
View Related
Oct 24, 2009
1) We need the Input screen to auto clear the fields once the " Save " button has been pressed and data transfered to the appropriate tracking sheet
2) We want to ensure that if any of the Red cells are empty the " Save " button will give an error ( one complication If the "Transfer Type" highlighted in Blue has an entry " either STD/ISD/ESP " then " Call Purpose " needs to be mandatory
3) somehow the information on the "Comment " field is not getting captured
4) If possible we want a warning indicator if two rows in a tracking sheet ( example London ) are the same based on Coloums B to I ( except C )
5) Is there any possibility to give a pop calender in the " scheduled date " section of Input screen (Row 33)
View 3 Replies
View Related
May 28, 2014
I'm trying to write some code that links to certain sheets if certain cells are clicked. My sheets are named "01", "02", "03", ... , "20", ... "XX". I'm hoping I can use some loops to reference the names of the sheets since they are in a number format, but "j", which is how I tried to link cell rows with a corresponding sheet, in the code below doesn't cooperate. fix this or can you simply not reference sheet names this way?
If ActiveCell.Column = 4 Or 5 Then
For i = 5 To 7
j = i - 4
If ActiveCell.Row = i Then
Sheets("0j").Activate
Exit Sub
Else
End If
Next
Else
End If
View 3 Replies
View Related
Jul 26, 2013
I have a folder with 20 Excel files. I'm trying to create a master list of all the tab names. I can see all of the files opening, but it only copies some of the names.
VB:
Sub GetTabNames()
Dim wkBook1, wkBook2 As Workbook
Dim stFilePath1 As String
Dim FileList(1 To 18) As String
Dim iLoopSheet, iLoopProg As Integer
Application.ScreenUpdating = False
[Code] .....
View 2 Replies
View Related
Oct 6, 2008
How would one loop through all the workbooks in a network folder and put all of the worksheet names from all of the workbooks into the cells of the current sheet (a local file).
View 6 Replies
View Related
Jun 13, 2008
when is it appropriate to us arr(1 to 10) Vs. For i = 1 to 10. I know this may sound like a silly question and expose my ignorance - but I suppose there is no other way to learn :|
View 9 Replies
View Related
May 21, 2006
I have a work book with 3 sheets. Sheet 1 is the main sheet and sheets 2 and 3 will use (I hope vlookup) to update 3 columns from info in sheet 1. my attempt at a vlookup call in sheet 2 is: =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
my understanding is that: - $b3 is the cell in sheet 2 that will be updated as a result of the vlookup call. - [master_AoJ_2.xls]Sheet1!$B$3;$B$65 refers to range $B$3:$B$65 on sheet1 of master_AoJ_2. it does not work... infact I get nothing at all. when I type the call into cell $b3 of sheet2 excel thinks it is stariaght text. this is how I coded the function call =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
View 4 Replies
View Related
Jul 5, 2014
Suppose you have 3 variant Arrays, named sArrPos1, sArrPos2, and sArrPos3.
What is the syntax for using an integer variable to specify which of the three to work with?
E.g.
[Code] ......
I want to work with sArrPos1 first, then sArrPos2, then sArrPos3, but can't hard type them.
View 5 Replies
View Related
Mar 23, 2012
I need to create multiple arrays arr_1(), array_2(), array_3() etc. Each array will be used to store different data.
My idea was to create a for loop like the one below, which doesn't work.
Code:
For i=1 to 180
String = i
then initialize the array
Dim arr_& String ()
Redim arr_& String(1 to 183)
Next i
View 4 Replies
View Related
Sep 11, 2008
I have a complicated one here (at least for me)...
I have a very simple sample spreadsheet showing exactly how I'd like it to work but couldn't find out where to upload it? I can upload or send to you privately, if need be? May make it much easier to understand the desired end result.
I want to populate as follows:
Column A: "IN TIME"
Column B: "NAME"
Column C: "POSITION"
I have a date in cell D1 - today().
I need to search for that date in a column between range AA2 and BN2. When it finds the date (let's say it finds a MATCHing date in AA2), it will then search that entire column cells AA30:AA1920 and look for "server". When it finds "server" it will then grab the in time which will always be 4 cells directly above where it found the position ("server"), and then the name of the person, which will always be in column X, 6 cells above the position.
There will be multiple instances of "server", and I want to populate the columns A, B, C with all the servers it finds first for that day with their name, in time and position. then a blank row.
Then, I want it to find "Bar" positions using the same formula and method, and populate that right below the server data, then find "line", etc.
Ultimately, I'm trying to make a daily staffing plan, where all the people that are working on that date, it will show their in time, name, and position in columns, A, B, C as far down as necessary.
However, I'd like them auto grouped together by position, so I'd like the formula to somehow populate all the servers first, then all the bartenders, then hosts, then line, etc.
View 9 Replies
View Related
Dec 23, 2011
I have a userform with 70 toggle buttons, the buttons are arranged in 7 columns and 10 rows, hence I named each button c1r1 to c7r10.
The button captions will change, so I want to take the captions from cell contents: worsheet 'Buttons' and the range A1:A70
I can do this long hand...
c1r1.Caption = Sheets("Buttons").Range("A1")
c1r2.Caption = Sheets("Buttons").Range("A2")
.....
c1r10.Caption = Sheets("Buttons").Range("A10")
c2r1.Caption = Sheets("Buttons").Range("A11")
c2r2.Caption = Sheets("Buttons").Range("A12")
unitl I get to
c7r10.Caption = Sheets("Buttons").Range("A70")
I guess a loop would be better. Here's my code that does not work..
I was just going to insert word 'works' for now until I get the loop to work.
I'd also have to get a loop inside this loop, ie when the column number is 1, it needs to loop through the rows numbers, before it loops to column 2.
I guess I might be able to do that, but I fall at the first hurdle, I get Error 424, object required. I guess it does not like 'buttonaddress.caption'
Do I need to declare or dim 'buttonadress'?
buttoncoladdress = 1
buttonrowaddress = 1
Do Until buttoncoladdress = 7
buttonaddress = "c" & buttoncoladdress & "r" & buttonrowaddress
buttonaddress.Caption = "works"
buttoncoladdress = buttoncoladdress + 1
Loop
View 3 Replies
View Related
Nov 18, 2012
There are 2 buttons on my worksheet below each other. Each button has a size of a range (i.e. "G33:G34", "G36:G37").
This is what I would like to do:
1. Click on the first button
2. Copy A33:F42 and insert them below row 33
3. Move the buttons to the same position (10 rows down) on the sheet
4. Copy the existing buttons and put them in their original space (i.e. "G33:G34", "G36:G37")
5. Do it as many times as I click on the first button
I have this, and I have no idea to the remaining part...
Private Sub CommandButton1_Click()
Range("A33:F42").Select
Selection.Copy
Rows("33:33").Select
Selection.Insert Shift:=xlDown
Application.CutCopyMode = False
Range("B33:B42").Select
End Sub
View 4 Replies
View Related
Dec 11, 2006
I have a form with two buttons, one is to start downloading, one is to stop it, a sub is called when start buuton is clicked, there is a DO LOOP, I hope the DO LOOP stop when I clicked STOP button,
View 9 Replies
View Related
