2d Arrays: Click The "command Button" And Display One Collum With Names And The One Next To It With Results
May 14, 2006
I got a problem though with specificying a 2d array. I basically want to click the "command button" and display one collum with names and the one next to it with results. The only problem is trying to get vba to display this on the work sheet.
I'm working with 2 different sheets, sheet1 and sheet2.
I'll type in entry 1 to 4. 2 comboboxes, 2 cell values. then click on the command button1.
i'll pass over the values to sheet2 like this: array(comboBox1.value, range("a2").value, comboBox2.value, range("a4").value
I was asked to check against the last time the user click on the command button. if combobox1.value, range("a2").value, comBoBox2.value, range("a4").value MATCHES exactly the last entry in sheet2, it'll give a popup Box before it continues.
The first Command Button ( called CommandButton22 ) displays the result of some other calculation as its Caption ... this caption will therefore be changing from time to time.
I would like the second Command Button (called EnterButton ), when clicked, to send the caption from CommandButton22 to whatever cell on the active spreadsheet the user clicked into just prior to clicking on the 'EnterButton'.
I would like each time that I click on the 'EnterButton' for the Caption in CommandButton22 to be sent to the next cell down and so on and so on etc.
I created a UserForm in which the user inputs data and then press "OK" in order to save an output into a specific worksheet. Once the "OK" button clicked, the UserForm repeats itself with some textboxes in blank so that a new output can be generated.
I am trying to display in a Label of the UserForm the number of times the "OK" button is clicked BUT starting from one. In other words, before pressing "OK" the Label indicates "unit no1" and once the "OK" button is clicked it should go "unit no1 +1" and so on.
For that purpose, I am using the following code:
[Code] ......
The label displays Unit nº1 when starting (which is right). However when I click the OK button it still displays "unit nº1" and then it starts counting normally.
The thing is that it should display "unit nº2" from the 1st "OK" click.
I have a command button in my excel sheet, if I or my team person clicks on it, the same file has to go to my manager's mail ID from my or my team person's (who clicks) outlook.
How can I have userform 3 when clicked fill in a textbox on userform2 and then finally assign it to cell F3 on my worksheet.
VB: Private Sub CommandButton2_Click()End Sub
So I need commandbutton2 (which needs to retain a value of 1` when clicked ) on Userform3 to assign the value of 1 to TextBox44 (Which is using control Source F3 so the value here ends up in F3
VB: Private Sub TextBox44_Change() If TextBox44 > 5 Then MsgBox "Your entry must be part between 1 and 5", vbCritical Exit Sub End If End Sub
i want the user to be able to change the cell color on the click of a command button. the worksheet is protected. when the user click the command button the active cell changes to red and offsets by 1. then the work sheet is locked again.
The two problems I am having is 1. I want the range to begin from row 10, column k to column FD. all cells down
the second problem is the current code allows me to edit locked cell columns A to J ...
The error is Compile Error Sub or Function not defined.
It seems to work ok when enabled from within the Command Button but when the same macro is called from the button, it gives an error at the first-line following Loop.
The code was pasted in a module as Sub End_Input() and the button was modified with a Call function to the subroutine.
I am trying to create a quiz for myself for studying a foreign language. and I am trying to create a command button, so that when clicked, it will randomly pick from a list of names (located in another sheet) and place the name in a desired cell.
When I run them from the module they both work, Sub 'Calculator' brings up the Windows calculator and doesn't open a new one each time, Sub 'Calculator1' opens a new one each time.
However, when I call 'Calculator' from my userform it does nothing unless the windows calulator is already running. 'Calculator1' works as normal.
Userform1 on the attached file has a "Calendar" button to display a calendar that allows the user to select a date and have it placed in the Date Text Box. It simply doesn't work unless you click on the userform area where the calendar should appear - but how would the user know that?
I want to catch the click event on "Increase Indent" commandbar button.
I have this reference- http://msdn.microsoft.com/en-us/libr...ffice.10).aspx
But not able to execute properly:
Till now I have generated below Class Module "clsCBEvents" Public WithEvents colCBars As Office.CommandBars Public WithEvents cmdDecreseEndent As Office.CommandBarButton
Private Sub cmdDecreseEndent_Click(ByVal Ctrl As Office.CommandBarButton, CancelDefault As Boolean)
Running into this issue of "transworksheet macros"
I have a master "update" commandbutton on sheet 1. I have two sub "update" buttons on sheet 2 and 3 respectively.
What I would like to do is have the user click the master button, that would "click" the two sub buttons so they run their respective macros on their respective worksheets (within the same worksheet.
I have tried pasting the macro code in the master button, telling it to select the sub worksheet and then run the macro, but the marco runs itself on the master worksheet instead.
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
How can I return name of a command button on click? I want to create some sort buttons on a sheet I will use regularly to speed things up. I thought if I could call each sort button by the column letter the button sits in I can use this in a single sub for all buttons
e.g the button sitting in column A is called "A". when i click the button, it returns it's name to a variable which I can then use to sort column A. I know I could create a seperate routine for each button but I was just trying to think of something neater.
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
I have set up a number of arrays e.g. DataSetA (1 to 100), DataSetB (1 to 100) etc.
Is it possible to use a string variable (e.g. DataIndentifier) to identify and assign values to certain arrays.
For example, under certain conditions
DataIdentifier would be set to "DataSetA" and under other conditions DataIdentifier would be set to "DataSetB".
Having done this, I want to assign values such as DataIdentifier(1) = 3.4 or DataIdentifier (10) = 6.2 etc.
This obviously won't work because DataIdentifier is defined as a string not an array. How do I enable the string DataIdentifier to be used as an identifier for the array I want to assign values to? Therefore if DataIdentifier is set to "DataSetA" then effectively I want something like "DataIdentifier(1) = 3.4" to assign 3.4 to the array DataSetA(1).
I have read several articles saying using a command button as a toggle button can't be done but some articles have said it is possible using the state properties.
.State = msobuttondown .State = msobuttonup
Is there any way to combine this with the onaction property so that when you press the button, it stays down and activates a macro then when you press it again it pops back up and activates another macro.
i have a workbook , workbook A , workbook A has 5 command buttons with different names on them., i want a macro code , i have some data on workbook A as well , as soon as i click one of the command button suppose user click on B, data gets copied and gets pasted into the workbook B , which is in different folder .
I am trying to create an if statement that would check the results of a drop down menu and return a command to the user to enter certain information.
I created a drop down list, offering a list of projects 'a', 'b' or 'c'. I then created an if statement in the next cell. If user chooses project 'a' then the cell will return the project number associated with the project. The issue I am running into is that if the user chooses project 'c' in the drop down I need the cell to return a command for the user to enter the project name in the cell rather than the cell return the project number. How do I do that?
I have a userform that has one combobox at the top created manually. When the userform is opened, the user select an option in the combobox (these options are taken from a range on 1 worksheet). From the selection of the combobox, I use the comboxbox's change event to create and display 5 columns of textboxes and 2 columns of command buttons on the userform.
The number of rows of textboxes created depend on the option selected from the combobox since each option links to a different range of cells. Each of the 5 textboxes in each are set to be ".enabled = False" and display text as per the cell values within a range on another worksheet. 2 Columns of command buttons are created at the end of each row of textboxes - 1 is enabled and the other is not.
The creation of the textboxes and command buttons works as required. However, I am having problems with setting click events for each command buttons. When the 1st column of Command buttons are created, I need the click events to be created and filled out with 2 actions:
1. Enable all textboxes in the same row as the command button
2. Enable the other command button in the same row.
Here is the code I have so far that creates the textboxes and command buttons.
Each of the 5 textboxes and 2 command buttons have a unique name so the 1st row will have textbox and command button names of cTxtA1, cTxtB1, cTxtC1, cTxtD1, cTxtE1, CmdAmend1 and CmdConfirm1. The 2nd row will have the same names but with 2 on the end and so on. The bold sections is the code for the creation of the command buttons that I want click events for.
Code:
Private Sub CboTeamSelect_Change() Application.ScreenUpdating = False If CboGroupSelect.Value = "" Then Exit Sub Dim cTxtA As Control, cTxtB As Control, cTxtC As Control, cTxtD As Control, cTxtE As Control Dim CmdAmend As Control, CmdConfirm As Control Dim iNum As Integer Dim TxtTop As Long
I have searched this topic but I came up with nothing regarding my exact situation.
I have 5 buttons on sheet 1. I want them to all direct me to another sheet in the same workbook. However, some buttons will contain more than one sheet.
Example: Button 1 will direct me to 4 different sheets. Is this possible?
Also, When I open the workbook, I see many sheets that I am working from but I do not want them to show up when I open the workbook. The only way to see these sheets is to click on the command buttons at the top of sheet 1.
I have this workbook with 10 sheets. Each sheet has macros that are called from a floating toolbar. What I am trying to do:
I want to create a msgbox that warns me when I click in a toolbar's button to call a macro that not runs in the activesheet. Something like: "This code (or macro) doesn't match (or run) with the active sheet.
Is there a way to add a new sheet as soon as click on button on excel sheet with the name i give.
ex : there should be a button on the Index page , as soon as i click on button it should add a new sheet and i should be able to provide a name in the index page for that sheet.
