If Found Function/logic To Paste
Apr 12, 2007
I am creating a macro that will be copying values from one worksheet and pasting them in one of two possible locations into another worksheet - depending on a title for my data. The title I will search on is located in worksheet "Sheet1". If I find the title "WESTERN PERSPECTIVE" in Sheet1, I want to copy a range of values into one place on the other worksheet "Sheet2", otherwise if I find the title "EASTERN PERSPECTIVE" I want to copy a range of values into the 2nd place on my other worksheet "Sheet2".
My logic should follow:
If found "WESTERN PERSPECTIVE" in Sheet1, paste values into area 1 of Sheet2, else do nothing.
If found "EASTERN PERSPECTIVE" in Sheet1, paste values into area 2 of Sheet2, else do nothing.
I do not require coding for the copying and pasting, just the IF logic based on Found fields. I do have the coding which selects the field if the 'Find' is successful:
Cells.Find(What:="WESTERN PERSPECTIVE", After:=ActiveCell, LookIn:=xlFormulas _
, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False).Activate
View 3 Replies
ADVERTISEMENT
Apr 5, 2012
I use a large function when ranking numbers in an array each month. I'm only interested in the top 5 numbers. However, there are occasions when the top 5 numbers contain a tie. How do you build into a large function, logic to handle a tie. Here's my function, which is very simple:
Code:
=LARGE(C$6:C$40,1)
=LARGE(C$6:C$40,2)
ETC.
View 1 Replies
View Related
Aug 2, 2013
I'm trying to have three different possible results from one formula based on one cell.
If A1 is greater than 10 I want B1 show 5, AND if A1 is less than -10 I want B1 to show -5, AND if A1 is between 9 and -9 I want B1 to show the value of A1/2.
I've never used logic functions in excel before.
View 2 Replies
View Related
Mar 5, 2009
how to apply this function to my sheet given below. In this budget sheet, I want to create a graph which would show all the items percentage (item by item) with the values given in columns C & H only, leaving out the lines which are empty or bear 0 values.
View 2 Replies
View Related
Jul 2, 2007
=IF(WEEKDAY(D3,2)=7,"WEEKEND",IF(WEEKDAY(D3,2)=6,"WEEKDEND",IF(TODAY()=D3,"TODAY",IF(TODAY()-3=D3,"FRIDAY","ERROR"))))
how can i use the data cell validation using the above function logic?
View 2 Replies
View Related
Aug 3, 2009
I found a macro that searches a column on each worksheet and copies the searched for value to another worksheet but. I would like to modify this to copy the searched for value and the next 10 cells in the row but I am not able to figure out how to accomplish this. I highlighted in red the piece I would like to modify.
For Each sh In ActiveWorkbook.Worksheets
With sh.range("c10:c10000") 'this determines where to search
For I = LBound(MyArr) To UBound(MyArr)
'If you use LookIn:=xlValues it will also work with a
'formula cell that evaluates to "@"
'Note : I use xlPart in this example and not xlWhole
Set Rng = .Find(What:=MyArr(I), _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=False)
If Not Rng Is Nothing Then
FirstAddress = Rng.Address
Do
Rng.Copy NewSh.range("d1000000").End(xlUp).Offset(1,0)
Set Rng = .FindNext(Rng)
Loop While Not Rng Is Nothing And Rng.Address FirstAddress
End If
Next I
End With
Next sh
View 9 Replies
View Related
Nov 2, 2006
I have a test due in the morning, and I really need this question answered ASAP, if anyone could. I need to create an IF formula for this situation: the standard Mhz is 500. Give 55.00 for that standard. But for every increase of of Mhz, give 25.00 per 100 increase.
View 2 Replies
View Related
Sep 5, 2008
I have a spreadsheet (range A1:P5000). B2:B5000 would contain cheque numbers. Many of the cheque numbers would be repeated and would have common data in columns C, D, E, F, G, H, L and N.
I am trying to get VB code to copy and paste the common data when a user enters a cheque number.
For example:
When a user enters a cheque number in B3, VB would check B2 for a match. If a match is found, then VB would copy C2, D2, E2, F2, G2, H2, L2 and N2 and paste them in C3, D3, E3, F3, G3, H3, L3 and N3. If no match is found, then the user would have to manually enter the data in C3, D3, E3, F3, G3, H3, L3 and N3.
When a user enters a cheque number in B4, VB would check the B2:B3 for a match. If a match is found (in B2 – for example), then VB would copy C2, D2, E2, F2, G2, H2, L2 and N2 and paste them in C4, D4, E4, F4, G4, H4, L4 and N4. If no match is found, then the user would have to manually enter the data in C4, D4, E4, F4, G4, H4, L4 and N4.
When a user enters a cheque number in B100, VB would check the B2:B99 for a match. If a match is found (in B90 – for example), then VB would copy C90, D90, E90, F90, G90, H90, L90 and N90 and paste them in C100, D100, E100, F100, G100, H100, L100 and N100. If no match is found, then the user would have to manually enter the data in C100, D100, E100, F100, G100, H100, L100 and N100.
View 14 Replies
View Related
Apr 15, 2014
I have 10 worksheets in my workbook. The two that I'm concerned with in this post are "Main" and "Completed".
If Column AA in "Main" contains the word "Complete" (which is from a drop down list) I want to copy the entire row from "Main" and paste in the "Complete" sheet without over-writting previous pasted rows.
Back in sheet "Main" I want the data in that row to be cleared with the exception of Column A as it contains a formula for sorting blanks. If I delete that row it will mess up my links on other sheets.
View 14 Replies
View Related
Feb 15, 2008
I have a requirement to create a master spreadsheet using a macro to copy set cells from several other spreadsheets and paste them into the master one in a list for accounting purposes.
So far the macro reads in the spreadsheet filename(s) and copy/pastes the cells to the master one - I need to be able to paste the values onto subsequent rows for each input sheet which is where my problems lies. Currently the row just pasted in is overwritten over by the following one, I need to go to the next row down but am stuck on how to do it.
Sub EmployeeExp()
'
' EmployeeExp Macro
' Macro recorded 12/02/2008 by eugene.cross
'
Dim i As Integer
Dim f As String
I've attached an example master output sheet to show what I want to produce, albeit this has only one row!
View 7 Replies
View Related
Apr 5, 2008
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies
View Related
Feb 2, 2009
I am trying to use a cut and paste within a macro.
I have code working fine if I do a copy and paste which is as follows:
View 5 Replies
View Related
Jan 31, 2007
Got a bit of an issue with using the paste special function. I am trying to record a macro that would copy a group of cells that are verticle, and then paste them onto a new row in a different sheet.
I have done this in the past by enabling the record macro function and inserting a new row going back to the sheet with the data selecting the data copying it, and then selecting pasting area using paste special and enabling the "Transpose" box.
Although today i found this didin't work in fact it (this is the best i can describe it) merged each cell with the cell below givng a type of square function as can be seen below.
After i click ok, this happens
As you can see the cells are now twice the size.
View 3 Replies
View Related
Nov 11, 2008
I have a question regarding COUNTIFS. I have data arrayed vertically and horizontally on a worksheet. Date - Column 1 Column 2 etc. Criteria data (flight information) is listed under these columns. I'm trying to get the COUNTIFS formula to count the number of times a particular flight occurs within a date column.
My formula is
=COUNTIFS(C27:G24 (this is the field that contains the flight info), C6 (this contains the particular flight I'm looking for), C16:G16 (this contains the date range, C5 (this contains the date I'm looking for)
When I use this formula I get the result #VALUE! back. I also wanted to ask if there is any way to use the paste special function but not lose the original formatting/formulas from the cells one is pasting from.
View 4 Replies
View Related
Nov 27, 2008
It appears that my toolbar paste button has been disabled and I think this is due to an auto open macro.
Does anyone know what macro code I will need to run to regain the use of this button?
View 14 Replies
View Related
Jan 14, 2014
I've got it mostly figured out (I thought), but Excel doesn't like something about the code. I'm using Office 2010. When it tries to run the second line of this code, I get a 438 error:
Code:
Selection.Characters(83, Len(Selection) - 82).Cut
View 4 Replies
View Related
Feb 22, 2008
Can I write Copy and paste function in an IF statement
PTPO #Part #Line #DescriptionVendor #UOMLTPO Entry #Due DateAllowed DaysWork daysQty OrderQty RecvdUnder/ OverRectp dateDays Po lateMB550427917495072PANEL, SW MOLDED SLVR0BAY008EA204/16/20075/14/200728215014-365/7/200702013135/30/2007-280232023236/1/2007-28025
formulae in the column Q " days PO, Late" =IF(P3
View 17 Replies
View Related
Jan 25, 2007
There are three situations that should yield the answer "overdue" and a fourth and fifth situation that should yield an answer "on target". I'm new to functions and have spent SEVERAL hours on this
{=IF((G4<>0,F4<$g$1="Overdue")+(F4<G4="Overdue")+(G4<>0,F4>$g$1="On Target")+(F4>=G4="On Target"))}
View 10 Replies
View Related
Nov 6, 2011
Although the "Trip Sequence" is same , but I need to separate the Trips if the difference between the "1ST TIME " is more than 3 hours keep the first "Trip Sequence" unchanged , then by either adding a prefix or add 2000000 to the second "Trip Sequence" and 3000000 to the Third, so forth so on until all the rules are applied ( assuming more than 3 Trip Sequences could be also allocated in the database ).
Data Base
TRIP#
1ST TIME Trip CodeCount1st Stn2nd StnTrip Sequence
XXX07411230$AA3270CDGFRA3270001XXX1108400$BBK142LHRAMS3270002
XXX0740705$CC32124AMSGVA3270002XXX01441150$DDA98CDGDUB3270003
XXX10321030$MM1947BRUAMS3270004XXX05101410$VV19132AMSGVA3270004
XXX05111835$VV1984GVACDG3270004XXX11451430$KK31133FCOATH3270005
XXX10471700$KK31132ATHCDG3270005
In the above examples , The "Trip Sequence" is same 3270004 but the "1ST TIME" is more than 3 hours difference:-
I want to be able ( ONLY IF "1ST TIME" is in access of 3 hours while the Trip Sequence are same , I want the results as follows:-
TRIP#
1ST TIME Trip CodeCount1st Stn2nd StnTrip Sequence
XXX07411230$AA3270CDGFRA3270001XXX1108400$BBK142LHRAMS3270002
XXX0740705$CC32124AMSGVA3270002XXX01441150$DDA98CDGDUB3270003
XXX10321030$MM1947BRUAMS3270004XXX05101410$VV19132AMSGVA5270004
XXX05111835$VV1984GVACDG6270004XXX11451430$KK31133FCOATH3270005
XXX10471700$KK31132ATHCDG3270005
View 9 Replies
View Related
Apr 24, 2007
I have 3 ranges in an excel sheet
col 1 range contains a numeric value ("1" or "5")
col 2 range contains a string value ("left" or "right")
col 3 range contains a string value ("a" or "b" or "c")
example: I am trying to get a total count if col 1 contains either a "1" AND
col 2 value is "left" And col 3 value is "a". Note: If col 1 is blank (" ") then the rest of the row is irrelevant. See attachment
View 4 Replies
View Related
Jan 15, 2013
How would I create a shortcut to automatically copy the contents of cell H1 to cell K1, in other word I would like to hit a shortcut key and have the contents of that cell pasted 3 cells to the right on the same line. I have to do this over and over again down the worksheet. I am working on taxes and want to copy values over to the expenses column as I find them.
I would also like to know if it is possible while having cell D1 highlighted I could have a shortcut created that would copy the value three cells over in H1 to cell K1. That would be the fastest, but I don't know if it is possible?
View 2 Replies
View Related
Apr 18, 2012
The problem is that whenever I have any browser open, IE, Chrome, Firefox, etc... the Cut & Paste, Copy & Paste function does not work correctly in Excel 2010.
When I Cut or Copy the blinking marquee around my selection briefly appears and then disappears. When I try to paste, I only have two options under the paste special function: Unicode Text and Text, same with cut and paste, however, the text doesn't actually cut, it only copies.
As soon as I close down any of the mentioned browsers, the full functionality of the cut/copy & paste functions are restored, no need to restart excel.
I need to have open a browser most of the time for work as our system is web based, so closing and re-opening is more than just an annoyance.
View 2 Replies
View Related
Mar 13, 2013
I am working with some data that consists of two types of messages: one containing vessel speed and another containing vessel type. Both messages share a common ship identifier number. What I'd like to do is run through column A (ship ID), check column B (ship type), and if column b has a value, to paste that value in all instances of that ship ID.
View 1 Replies
View Related
Jun 4, 2008
Is it possible to create a User Defined Function that replicates the "Copy/ Paste Special" function? I tried recording a Macro and using that as the basis for the User Defined Function but it didn't work.
View 7 Replies
View Related
Dec 8, 2008
I am trying to calculate the number of forecasted hours worked per week for each contractor based on their allocation to the project and also based on a 37.5 hour standard week.
I am using a formula which was previously provided to me for another problem but theoretically should share the same logic. The formula works only when a contractor is forecasted to work for a full week. If there is a contract which finishes mid week the formula returns a weird value. Also another problem is that if a contract is starting on the 12th of January, it still forecasts a full week for the week commencing the 7th of January. I have attached a spreadsheet for everyone's reference.
View 4 Replies
View Related
Jan 15, 2009
I want cell B to be blank if 1 of 2 different conditions are met. If Cell A is blank then so too should be Cell B. If cell A contains data, then I want cell B to perform a formula $D$1-E6.
However, if Cell C contains data then Cell B should return to a blank status.
View 6 Replies
View Related
Aug 13, 2009
Sample spreadsheet attached to provide a visual of what I'm trying to accomplish.
Issue: Need to identify which userid's can be deployed and which userid's can't
Detail: In the attached spreadsheet, column A would list all userid's that the project team wants to deploy an application to. Let say for this example that they want to deploy Adobe Acrobat Pro v9 to replace Adobe Acrobat Pro v7. In my actual spreadsheet, there are 1307 userid's in Column A.
As a result of meetings, we have identified 11 Functional Teams that CANNOT have their users upgraded to Acrobat Pro v9. Using internal LDAP look up tools, I am able to generate a list of userid's for each of those 11 Functional Teams. The numbers vary. Again, in my actual spreadsheet so far, Functional Team #1 has 600 userid's, FT#2 has 2700 userID's, FT#3 has 6700 userid's, etc. I'm not done generating the userid's for each functional team but I know I need assistance once I'm done!! LOL!!
Using Column A, I'd like to see if that same userid exists anywhere in Columns B thru L. If it does, then that specific userid cannot be deployed. I would like that userid to be displayed in column N. And in Column O, I'd like to display the name or names of the functional team that this userid is a member of. It could be multiple teams. This will help me identify users that have multiple functional team memberships. Useful data for future deployments.
Using Column A, if a userid does not exist in Columns B thru L, then that userid can indeed be deployed. I'd like to get that userid displayed in Column M.
View 10 Replies
View Related
May 7, 2009
In the columns below B is just 95% of A. What I want to do in column C is to put the maximum value of B over the range that corresponds until the value in A is less than that. For example for my 1st run the value would be $1,125.68 because this is the maximum amount before you fall below that in column A, or in this case hits $1,106.40. I want to be able to perform this automatically down the line (expanding the range until the logic test is true) but can't figure out how to do this. The formula would basically be the max of the range in Column B is > Column A until this is not true, then return the max in Column B for entry in Column C. Then in Column D I would run an identical analysis but return the Row identifer for the dataset.
View 11 Replies
View Related
Sep 21, 2009
I need your help on the attached sample sheet. I have used the concatenate & indirect combination logic to get the desire comments as outcome , but my problem is that I have 300 rows & 30 sheets in a workbook with this logic , it is increasing the size of my file as I have a total of 30 sheets with same logic. I need it in every sheet. If there is any other alternative or solution.
View 14 Replies
View Related
Feb 17, 2014
I have a dump which looks like below sample:
3
3
2
2
The actual dump will have around 200 - 500 rows of data.From the above I need to manually group them which are similar. E.g. the data of (3, 3, 2 , 2) in row 1 & 2 are matching, so they will be group 1 & row 3 will be group 2, row 4 will be group 3 respectively.
The sum & sort did not work as sometimes the data with the same range are not in same order. simpler logic/VBA code if any, which will automatically put group numbers if the data in two rows are exact match.
E.g of the output below for the above data:
Group No.
1
3
3
2
2
View 6 Replies
View Related
