Convert Number In TextBox To True Number

Nov 7, 2006

i have this function that poulates data from a userform into a sheet.

For lLoop = 1 To MAWBNoVar
With Range("B" & Rows.Count).End(xlUp)
.Offset(1, 0) = Controls("txtMAWB" & lLoop)
.Offset(1, 1) = Left(Controls("cbDestination" & lLoop), 3)
.Offset(1, 2) = Controls("txtGW" & lLoop)
.Offset(1, 3) = Controls("txtCBM" & lLoop)
.Offset(1, 4) = "= ROUND(E" & Y & "*167,0)"
.Offset(1, 5) = "=IF(D" & Y & ">F" & Y & ",D" & Y & ",F" & Y & ")"
.Offset(1, 6) = "=IF(F" & Y & ">D" & Y & ",G" & Y & "-D" & Y & ",G" & Y & "-F" & Y & ")"
Y = Y + 1
End With
Next lLoop

My problem is that the data being entered into the sheet for the lines highlighted in red is going in as text, and not true numerics, so that the subsequent formulae are not working correctly.

View 3 Replies


ADVERTISEMENT

Get/Convert Number From Clipboard As/To True Number, Not Text

May 29, 2008

Does clipboard method gettext retreive the text from clipboard only, not number? What if numbers are copied (Ctrl C) to clipboard?

View 9 Replies View Related

Convert Alphanumber To True Number

Apr 8, 2008

If I want to change the value in a cell from 1.5B to 1,500,000,000 how would I use the CLng function to do so?

View 6 Replies View Related

Convert Number In Textbox (Userform)

Jun 2, 2014

Convert carton data from unreadable form to text box form (human readable form). I use this code:

=MID(n_combo,11,5)&"-"&MID(n_combo,16,4)

But it works if i close the user form and open it.

View 12 Replies View Related

Convert Textbox Currency To Number

Nov 24, 2006

I have a Userform where i have the user in put a dollar amount in a text box. Im having difficulty getting this assigned to a variable as an integer. I get a "type mismatch" error. I have tried declaring the variable as an integer, and tried the cint() function, but i get the same error.

View 3 Replies View Related

Excel 2010 :: Convert Text To Number And Format Number Without 2 Decimal Places?

Oct 23, 2011

I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.

[URL]

View 4 Replies View Related

Sequential Number For Cells That Have TRUE

Feb 21, 2014

I have a column that says either TRUE or FALSE this is dependent on what number i input into another cell, so if i input 8, TRUE shows on every 8th row,

I want the cells that say TRUE to also have a sequential number next to it in the column beside it.

Formula i have: =MOD(ROW(S2)-1,nth_No.)=0

So for example, every 3rd row is TRUE, i am wanting a sequential number beside it:

FALSE
FALSE
FALSE
TRUE 1
FALSE
FALSE
FALSE
TRUE 2
FALSE
FALSE
FALSE
TRUE 3

View 6 Replies View Related

True Or False If Number Lies Between A Certain Value

Apr 8, 2014

I have an Excel workbook which has 10 rows of numbers with a min of 20 and max of 30. The random number lies in column B and this will be tested to see if it lies between the min and max. I need to loop this 10 time over

I first started out declaring the 3 variables and assigning values to each variable. It works if I assign a value of 22 for Number but I want VBA to see the Number and make a decision (True or False) if that number lies within the range of 20 to 30.

Should I name the Number variable as a variable because its value will change depending on if it matches the conditions? Also would a case be easier? Between.xlsx

View 4 Replies View Related

VBA SumIf Result; TRUE; Instead Of A Number

Dec 7, 2009

I've tried using the worksheetfunction.sumif route and couldn't seem to get the syntax correct. I'd prefer the worksheetfunction route, as I don't need the formula stored, but it would be great to have both of these pieces of code for reference online - I scoured Google, and the examples I found were pretty weak.

I've recorded the macro (hence the R1C1 references in the second example) and had it work perfectly, but when I replaced row references with my variables, it went back to displaying "TRUE." I'm including all the code here.

Variables:
expr = 3 to 38 (For loop)
startrow = the starting row for the reference data
endrow = the ending row for the reference data
thresh = minimum threshold (a number)

Syntax error here:

View 3 Replies View Related

Count Number Of Occurrences If Two Conditions Are True

Apr 12, 2014

I'm trying to count the number of occurrences where two conditions in a table are true.

I have a table that has two columns for ratings; impact and probability. Each can be scored 1-5 This creates a matrix table of possible scores from 1 - 25 (image attached)

I want to COUNT the number of items in each of the boxes (not the total score). For example, how many are Impact 5 and Probability 5 (25 total); how many are Impact 4 and Probability 2 (8 total), and so on. Basically a count of the each of the intersections in the matrix.

Something like "Countif Impact is 5 AND Probability is 5"

Is it possible to count something once, checking for multiple conditions?

View 2 Replies View Related

Calculating Number Of True Results From If Formula

Apr 16, 2014

I am using a spreadsheet to determine if students are meeting Growth Targets between a pre test and post test.

Here is my formula

=If(D8>=C8,"yes","no")

D8 is the Growth Target and C8 is the Post test Score.

After doing this, I need to calculate the percentage of Yes results. This year it will be easy, as it only applies to 25 students. Count the yes's and multiply by 4. Next year, it will apply to number in the neighborhood of 150 students.

Here is a sample

PreTarget Post
Student 15778 82Yes
Student 25369 91Yes
Student 35778 75No
Student 45778 68No
Student 55369 50No
Student 63761 50No
Student 74061 68Yes
percent of yes's

View 5 Replies View Related

Copy ID Number From One Table To Another When T/f Column True?

Oct 31, 2013

I have a list of items that I am preparing to upload to an access database. The list is quite lengthy and has required a lot of manual corrections to get it prepared for upload. It also has several columns that are not needed in the access database, but that I used to make sure that all of my data was ready. What I'd like to do is create a new table that will have the same structure as the table in my access database and upload the portion of data that I have ready now so that I can do some further development using actual data. In order to do this I need to extract the ID Numbers (column B values) of the records that are marked "True" in the "Ready" column (column G Values) and deposit them in the new table. I only want to copy over the ID Numbers as the additional fields will be populated with match / index lookups from a third table that I have on another worksheet.

View 2 Replies View Related

Count Number Of Times One Value Is Higher Than Another IF Criteria Is True?

Dec 17, 2013

I have two columns with values. Then I have a third column with one letter A or B.

I'm not used to excel, but I've tried my way with COUNTIFS and I'm pretty sure it's the way to go, but I'm lost in the syntax.

I want to count the number of times the values in the first column is larger than the values in the second column, if the letter is A. And then flip the ">" sign and count that and hopefully the first number is higher.

View 4 Replies View Related

Excel 2007 :: If String Contains A Number Then Return True

Oct 15, 2011

formula that would return 'TRUE' if the string contains a number. Example below. Using Excel 2007.

One Part Order 123456 for shortage items shipping to US/TX-USA

View 9 Replies View Related

Formula To Return Number Of Continuous True Values At The End Of A List

Apr 9, 2014

I have two data columns: the first is a list of the last 100 calendar dates, and the second is an ON/OFF (or 1/0 if you prefer) value corresponding to each date. If the last value in the second column list is ON, I want to find how many continuous days the value has been ON for. If the last value in the second column is OFF, I want it to return a zero. Note that in the 100 day span of data, the value may switch between ON and OFF several times, but I only want the continuous, uninterrupted ON days at the end of the date range.

View 8 Replies View Related

If Cell Contains Dash And Symbol Surrounded On Both Sides By A Number Then True

Jan 13, 2012

I'm trying to make a formula but are failing. This is the data:

Cells:
a1= ant-gel
a2= ant - gel
a3 = size 1 - 6
a4 = size 1-6
a5 = book - 5
a6 = book-5
a7 = good book

I want a formula that displays "True" if cell contains a "-" symbol AND the dash symbol is surround on both sides by a number (a space can go between dash and number)

I want the results to go in column B

For example, if a1 contains a dash and dashes are surrounded on both sides by a number, then "TRUE", otherwise "FALSE.

therefore:
b1 = FALSE
b2 = FALSE
b3 = TRUE
b4 = TRUE
b5 = FALSE
b6 = FALSE
b7 = FALSE

View 2 Replies View Related

Number Format For Textbox?

Mar 1, 2013

I have a userform that contains textbox's that are linked to excel cells and i was wondering if there is a way to format the textbox to show the values in the number format. As the cells values are constantly changing the following code only works if the number is in the hundred of billions but if the number changed to 10,000 for example the format would not adapt.

Private Sub TextBox1_Change()
Me.TextBox5 = Format$(CStr(ThisWorkbook.Sheets("ISN").Range("H1").Value) * Val(TextBox1.Text), "###,###,###,###")
End Sub

View 3 Replies View Related

Textbox Number Format

Sep 16, 2006

what the format would be for 3 numbers in a userform textbox. No decimals, no symbals, just the 3 numbers.

View 4 Replies View Related

Round A Textbox Number

Aug 21, 2007

I have a number in a cell (12.34) I wish to copy this number into a user form textbox. I can copy the number, however it is about 6 places behind the decimal point. How can I round the number going into a textbox to 2 places?

View 7 Replies View Related

Number In TextBox Seen As Text

Oct 4, 2007

I am trying to manipulate a stock list using a Userform to simplify the UI.

Problem:

The idea is to allow the user to enter data via the Userform which works fine until we need to do calculations. The spreadsheet contains calculations which use the cost and margin data input via the Userform. The formula results are then supposed to display via the Userform. The problem is that the spreadsheet calculation is overwritten when the save/update button on the Userform is clicked. I understand why this is happening, but I am unable to fix it.

View 6 Replies View Related

Convert To Number..

Nov 11, 2008

I'm just trying to get a total of columns E, F and G, and place those totals in row 5. The problem is that somehow the numbers in column G were stored as text, so the SUM formula is coming up "0". How would I format these cells, in a macro, (columns E, F and G, just in case the data in the other two columns were stored as text), as a number so that I can total them.

I've tried selecting the column, selecting format cells and choosing number, but that doesn't work. I can manually select the cells, click the little exclamation point, and then tell it to convert to number. This works, but when I tried to record it to add it to the macro, it didn't record anything but the selection of the cells.

View 2 Replies View Related

VBA To Convert To Number

Jul 28, 2009

I have a string of imported data which comes into an existing spreadsheet. It cannot be changed prior to importing as the data is provided by an external vendor.

When the data is imported into my spreadsheet the Error Checking tag comes on, after I select the cells where certain numeric data has been entered, stating that this is a range of Numbers Stored as Text. If I click on the Error Checking tag and select the Convert to Number option and then enter my VLOOKUP function I get the desired answer. If I do not convert the text to numbers then my VLOOKUP function does not work at all. The cell just displays the function text itself instead of the desired answer.

Here is what I am requesting:

Assistance with writing the VBA code to accomplish the manual task of converting the text to numbers. I have tried to format using the Ribbon without success.

View 9 Replies View Related

Convert To Number

Oct 31, 2009

when i import some data from web
some of the character show or 1 ..these look like a word rather than number
so may i know how can i convert "1" to 1.5?

View 9 Replies View Related

Limit TextBox To Number Of Characters

Nov 26, 2006

I want to automatically prevent users from entering more than two digits into a textbox.

i dont want to show a message box or anything like that. I want it to be physically imposible for them to enter more than two digits i.e. when they enter two digits, pressing any other keys on the keyboard should have no effect on the contents of the textbox.

View 4 Replies View Related

Textbox Error When Changing Number

Apr 10, 2007

This code works fine, the problem is if I put a number in, and then backspace in the textbox to change the number, I get a runtime 13, type mismatch. This error only occurs when I delete all the numbers in the cell. For example, say the number in the cell is 5025. If i change it to 5123, that is I did not have to delete the first 5, it will work. If I want to change to something like 4167, i must delete the first 5 and it will give the error. I have only been using VBA for a couple weeks, I assume it's something simple.

Private Sub TextBox1_Change()
Dim StaffCost As Single
Dim AvgDriveTime As Single
Dim AddlDrives As Single
StaffCost = OLEObjects("TextBox1").Object.Value
AvgDriveTime = Range("E5").Value
AddlDrives = Range("F5").Value
With Range("G5")
.Font.Bold = False
.Value = StaffCost * AvgDriveTime * AddlDrives
End With
End Sub

View 4 Replies View Related

Ensure TextBox Only Contains X Digit Number

Mar 25, 2008

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address <> Range("B3").address
End Sub

I would like to change the target to ceratin cells in my active row. How would I write the code to achieve this.

View 7 Replies View Related

Add Next Number In Sequence & TextBox Text

May 8, 2008

I have worksheet with a column of client codes. These are made up of:
(a) a "base code", being a minimum four to five digit, i.e.

0000
0001
0002, etc

(b) plus a decimal point and a "sub code" (i.e.

.00
.01
.02
.03 through to .99)

The worksheet also contains the client name (i.e.

1031.00 John Smith
1031.01 Mary Smith
1032.00 Jack Brown
1033.00 My Company etc

As the supplier codes list has been manually done, there are numerous "gaps" in base code numbers as well as the subcodes.

I am looking to have a userform that a user can:

find the next unused base code and apply the 00 subcode (with client name).

View 3 Replies View Related

Convert Text To Number ...

May 14, 2007

I have a combobox embedded into an excel sheet with a linked cell and a range defined in the combobox properties. Every time I change the value in the combobox, the value in the linked cell is stored as text instead of a number.

I have tried copying a cell containing 1 and copying and pasting as special into the linked cell but that only fixes it for the time being. If I change the value in the combobox again, the value in the linked cell is again stored as text. I tried =value() in the linked cell but that again only worked temporarily. Every time I change the value in the combobox, the value in the linked cell is stored as text.

View 13 Replies View Related

Convert Number To A Date?

Jan 11, 2013

I have a date in a particular cell, say O5, formatted as mm/dd; e.g. 11/14

I have the following formula in another cell;

=M5 &", Lot# "& N5 &", Expires "& O5, where cell M5 = "CONTROL" and cell N5 = "#####"

Why does the date get converted to a serial number. i.e. CONTROL, Lot# #####, Expires 41592?

My aim is to get the date "11/14" to appear in the cell.

View 1 Replies View Related

Convert Name Of Month To A Number

Jan 15, 2013

I am trying to convert the name of a month to a number but there is a slight issue with using my normal method of TEXT("1/"&A1&"/2013","mmm")

I am trying to create a dynamic table which if you change 1 value for the month, it changes others

so my data looks like so,

Jan
Feb
Mar
Apr
May <---- this is the value which is chosen

The problem is when I select the month "January", it assigns the value of the above cell as 1/0/2013 which is not a date when in fact I want to set it as "December".

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved