Copy ID Number From One Table To Another When T/f Column True?
Oct 31, 2013
I have a list of items that I am preparing to upload to an access database. The list is quite lengthy and has required a lot of manual corrections to get it prepared for upload. It also has several columns that are not needed in the access database, but that I used to make sure that all of my data was ready. What I'd like to do is create a new table that will have the same structure as the table in my access database and upload the portion of data that I have ready now so that I can do some further development using actual data. In order to do this I need to extract the ID Numbers (column B values) of the records that are marked "True" in the "Ready" column (column G Values) and deposit them in the new table. I only want to copy over the ID Numbers as the additional fields will be populated with match / index lookups from a third table that I have on another worksheet.
View 2 Replies
ADVERTISEMENT
May 2, 2013
I have two Tables, Table1 and Table2, in a single Excel spreadsheet. Table1 is our master log, and Table2 contains only Provider Names, Contact Names, Phone Numbers, and Email Addresses. I need to compare column K from Table1 with column AT from Table2. Whenever Excel finds a perfect match, I need Excel to copy AW:AY to AB:AD. For each value in column AT, there will be several identical matches in column K.
I have tried to implement vlookup() and index(match()), but cannot figure either one of them.
Table1 is almost 1500 rows long, while Table2 is not quite 80.
View 3 Replies
View Related
May 29, 2008
Does clipboard method gettext retreive the text from clipboard only, not number? What if numbers are copied (Ctrl C) to clipboard?
View 9 Replies
View Related
Nov 7, 2006
i have this function that poulates data from a userform into a sheet.
For lLoop = 1 To MAWBNoVar
With Range("B" & Rows.Count).End(xlUp)
.Offset(1, 0) = Controls("txtMAWB" & lLoop)
.Offset(1, 1) = Left(Controls("cbDestination" & lLoop), 3)
.Offset(1, 2) = Controls("txtGW" & lLoop)
.Offset(1, 3) = Controls("txtCBM" & lLoop)
.Offset(1, 4) = "= ROUND(E" & Y & "*167,0)"
.Offset(1, 5) = "=IF(D" & Y & ">F" & Y & ",D" & Y & ",F" & Y & ")"
.Offset(1, 6) = "=IF(F" & Y & ">D" & Y & ",G" & Y & "-D" & Y & ",G" & Y & "-F" & Y & ")"
Y = Y + 1
End With
Next lLoop
My problem is that the data being entered into the sheet for the lines highlighted in red is going in as text, and not true numerics, so that the subsequent formulae are not working correctly.
View 3 Replies
View Related
Apr 7, 2013
I am able to autofilter the table with a criteria on Column C, but I can't figure out how to mirror the visible cells on column C, on column B. Is that possible to do?
Example
Col A
Col B
Col C
SN0001
1/31/2013
1/15/2013
[Code]...
I want to filter column C to show only February and March dates, and overwrite the corresponding rows in Col B with the same dates in Col C.
This is a simplified version of what I am trying to do. In reality The column B information overwritten periodically, then further updated with information collected from several different sources.
View 4 Replies
View Related
Jan 2, 2010
I have a got a table ( 10x30) with random numerical values.
How can I return a column number with maximum value?
Values will be changed periodically so the maximum number could be in different column each time
Example:
A-B-C-D-E-F-G
1-2-3-4-5-6-7
2-6-8-18-1-1-8
2-5-6-9-12-1-7
The results will be 4.
View 9 Replies
View Related
Jun 27, 2014
I'm trying to find the last column of my table that will change from week to week and copy the contents of that cell and the one beneath it and paste them into the two cells to the right of them.
Here's what I've tried:
Sheets("LY - TY Chart - Tot. Sell $").Select
Dim lastTableColLY As Long
Dim lastTableColTY As Long
Dim nextTableColLY As Long
Dim nextTableColTY As Long
lastTableColLY = Cells(109, Columns.Count).End(xlToLeft).Column
lastTableColTY = Cells(110, Columns.Count).End(xlToLeft).Column
Range.Cells(lastTableColLY, lastTableColTY).Select.Copy
Range.Cells(nextTableColLY).Select.Paste
I'm getting the following error:
Compile error: Argument not optional at the
Range.Cells(lastTableColLY, lastTableColTY).Select.Copy
View 2 Replies
View Related
Nov 24, 2011
Function in table.
I have a table:
A B C D
|Parent code|Child code|QTY|Unit|
|aaaaa | 1111| 1| PC|
| | 2222| 1| PC|
| | 3333| 1| PC|
| | 4444| 1| PC|
|bbbbb | 1111| 1| PC|
| | 2222| 1| PC|
| | 3333| 1| PC|
|ccccc | 1111| 1| PC|
| | 2222| 1| PC|
I need any function to "A" column to automatically fill in parent code to each child code (row) of the table.
View 2 Replies
View Related
Apr 6, 2008
i have three sheets in this workbook. i want to filter the the pupils with less than 20 marks in total at the end and copy it to the page named filter, from which i will go to the sheet1 which gives a remedial plan for ONLY those pupils who come in the filter page. this is all good but the problem is that when i update the Cont page, it wont update in the filter page.
View 6 Replies
View Related
Dec 11, 2008
I have a basic formula =C17+'Asset Depreciation 2008 Onwards'!C24, and I want to copy it down just using the drag function. Problem is that the second reference range of cells are in rows and hence when I copy it down it doesn’t automatically update the cell references because it want to update them by column number instead of row number. IE I want it to display =C17+'Asset Depreciation 2008 Onwards'!
D24, instead of C25. Do you know if there is any way of telling Excel that I want it to increase the column number by 1 every time, instead of the row number for this part of the formula?
View 5 Replies
View Related
May 15, 2009
I want to compare a hand entered data sheet to my system data. System data is exported in. Then that data is used to populate a pivot table. I use a lookup list that fills in matching data from my hand typed sheet. From there I want to use true/false to see if the data matches. However, the formula will not copy down. I am sure it has to do with the formula holding a value, but I can’t seem to correct it.
Recap
1.System data populates sheet
2.Pivot table pulls info I need.
3.Lookup list cross references hand entered data sheet and puts value next to pivot table.
4.I need to do a true false to see if data matches but can’t get it to work
Example worksheet: On the worksheet you can see that the true false statements are incorrect. The system data and the hand entered data match two times not once.
View 3 Replies
View Related
Feb 21, 2014
I have a column that says either TRUE or FALSE this is dependent on what number i input into another cell, so if i input 8, TRUE shows on every 8th row,
I want the cells that say TRUE to also have a sequential number next to it in the column beside it.
Formula i have: =MOD(ROW(S2)-1,nth_No.)=0
So for example, every 3rd row is TRUE, i am wanting a sequential number beside it:
FALSE
FALSE
FALSE
TRUE 1
FALSE
FALSE
FALSE
TRUE 2
FALSE
FALSE
FALSE
TRUE 3
View 6 Replies
View Related
Apr 8, 2014
I have an Excel workbook which has 10 rows of numbers with a min of 20 and max of 30. The random number lies in column B and this will be tested to see if it lies between the min and max. I need to loop this 10 time over
I first started out declaring the 3 variables and assigning values to each variable. It works if I assign a value of 22 for Number but I want VBA to see the Number and make a decision (True or False) if that number lies within the range of 20 to 30.
Should I name the Number variable as a variable because its value will change depending on if it matches the conditions? Also would a case be easier? Between.xlsx
View 4 Replies
View Related
Dec 7, 2009
I've tried using the worksheetfunction.sumif route and couldn't seem to get the syntax correct. I'd prefer the worksheetfunction route, as I don't need the formula stored, but it would be great to have both of these pieces of code for reference online - I scoured Google, and the examples I found were pretty weak.
I've recorded the macro (hence the R1C1 references in the second example) and had it work perfectly, but when I replaced row references with my variables, it went back to displaying "TRUE." I'm including all the code here.
Variables:
expr = 3 to 38 (For loop)
startrow = the starting row for the reference data
endrow = the ending row for the reference data
thresh = minimum threshold (a number)
Syntax error here:
View 3 Replies
View Related
Apr 8, 2008
If I want to change the value in a cell from 1.5B to 1,500,000,000 how would I use the CLng function to do so?
View 6 Replies
View Related
Apr 12, 2014
I'm trying to count the number of occurrences where two conditions in a table are true.
I have a table that has two columns for ratings; impact and probability. Each can be scored 1-5 This creates a matrix table of possible scores from 1 - 25 (image attached)
I want to COUNT the number of items in each of the boxes (not the total score). For example, how many are Impact 5 and Probability 5 (25 total); how many are Impact 4 and Probability 2 (8 total), and so on. Basically a count of the each of the intersections in the matrix.
Something like "Countif Impact is 5 AND Probability is 5"
Is it possible to count something once, checking for multiple conditions?
View 2 Replies
View Related
Apr 16, 2014
I am using a spreadsheet to determine if students are meeting Growth Targets between a pre test and post test.
Here is my formula
=If(D8>=C8,"yes","no")
D8 is the Growth Target and C8 is the Post test Score.
After doing this, I need to calculate the percentage of Yes results. This year it will be easy, as it only applies to 25 students. Count the yes's and multiply by 4. Next year, it will apply to number in the neighborhood of 150 students.
Here is a sample
PreTarget Post
Student 15778 82Yes
Student 25369 91Yes
Student 35778 75No
Student 45778 68No
Student 55369 50No
Student 63761 50No
Student 74061 68Yes
percent of yes's
View 5 Replies
View Related
Jan 29, 2008
how do i copy one column to another one (with formula) that not repeat any number?
i have a list of prices and i need that list in other column with any price repeated.... and theses prices are imported data, so they change, thats way need to be formula =/
View 11 Replies
View Related
Jan 22, 2010
Is there a way to copy a formula result as the actual value and not the formula,
I can do copy and paste using "value" option but would like an automated formula or code option if possible.
In the example, D4 copies C4, would like D4 to show "AB" and not the formula "=C4"
View 8 Replies
View Related
May 5, 2009
If you look at the attached spreadsheet you will see 6 tabs. Main, New Cust, Quote, etc.
"Main" will be the sheet that everything is inputted. If there is a "Y" under new customer, I want the entire row to copy to the tab "New Cust". If there is an "X" under quote, struct design, or graphic design I want it under its approp. tab. The Lisa tab should take certain Sales-Person and copy entire row on the Lisa tab. The certain Sales-Persons are BS, PK, PB, PD.
Buttons are fine. The "main" page will be getting updated daily w/ new info so after entering new data, i can press the button and it should copy the above to its locations.
View 7 Replies
View Related
May 12, 2008
I need to copy all the work sheets into one single work sheet (mastersheet). The source work sheets are having same column structure. The condition which i need to take care of is that after column 3 if at all there is any data till column 10 then in the destination mastersheet these should be copied in different rows with first two columns repeated. I need to do this using VBA macro.
View 9 Replies
View Related
Dec 17, 2013
I have two columns with values. Then I have a third column with one letter A or B.
I'm not used to excel, but I've tried my way with COUNTIFS and I'm pretty sure it's the way to go, but I'm lost in the syntax.
I want to count the number of times the values in the first column is larger than the values in the second column, if the letter is A. And then flip the ">" sign and count that and hopefully the first number is higher.
View 4 Replies
View Related
Oct 15, 2011
formula that would return 'TRUE' if the string contains a number. Example below. Using Excel 2007.
One Part Order 123456 for shortage items shipping to US/TX-USA
View 9 Replies
View Related
Oct 28, 2008
I need a macro that would sort out the true value in column A, and paste it to another sheet (range A77)
View 10 Replies
View Related
Dec 4, 2009
I need a macro to copy and paste cells from one worksheet to another, if there is the word true in the column L of that row.
View 10 Replies
View Related
Feb 14, 2008
It brought up my own thread, I didn't realise it untill today, but the answer I been using uses conditional formating to highlight the lowest cells in each row. And as Sicarii pointed out earlier today you can't select a cell my color with conditional formating turned on. can I highlight some other way or can I select cells to copy some diffrent way. This is the VBA I use to select the lowest price.
Sub FIND_LOW_PRICE()
Range("a1:H6").Select
Selection.FormatConditions.Delete
Selection.FormatConditions.Add Type:=xlExpression, _
Formula1:="=and(a1=min($a1:$H1),not(isblank(a1)))"
Selection.FormatConditions(1).Interior.ColorIndex = 6
End Sub
And this is the code that Sicarii supplied and correctly warned me will not work with conditional formating.
Sub COPY_BASED_ON_COLOR()
Dim RngCol As Range
Dim lLoop As Long
With Sheets("Sheet1")
Set RngCol = .Range("A1", .Cells(Rows.Count, 1).End(xlUp))
End With
For lLoop = RngCol.Rows.Count To 1 Step -1
If Range("B" & lLoop).Interior.ColorIndex = 6 Then
Sheets("Sheet2").Range("B" & lLoop) = Sheets("Sheet1").Range("B" & lLoop)........................
View 2 Replies
View Related
Apr 9, 2014
I have two data columns: the first is a list of the last 100 calendar dates, and the second is an ON/OFF (or 1/0 if you prefer) value corresponding to each date. If the last value in the second column list is ON, I want to find how many continuous days the value has been ON for. If the last value in the second column is OFF, I want it to return a zero. Note that in the 100 day span of data, the value may switch between ON and OFF several times, but I only want the continuous, uninterrupted ON days at the end of the date range.
View 8 Replies
View Related
Jan 13, 2012
I'm trying to make a formula but are failing. This is the data:
Cells:
a1= ant-gel
a2= ant - gel
a3 = size 1 - 6
a4 = size 1-6
a5 = book - 5
a6 = book-5
a7 = good book
I want a formula that displays "True" if cell contains a "-" symbol AND the dash symbol is surround on both sides by a number (a space can go between dash and number)
I want the results to go in column B
For example, if a1 contains a dash and dashes are surrounded on both sides by a number, then "TRUE", otherwise "FALSE.
therefore:
b1 = FALSE
b2 = FALSE
b3 = TRUE
b4 = TRUE
b5 = FALSE
b6 = FALSE
b7 = FALSE
View 2 Replies
View Related
Jul 13, 2014
a1=aaa
a2=111
a3=222
a4=333
a5=bbb
a6=444
a7=555
a8=ccc
a9=909
a10=234
if a1 = aaa then copy a1 to b1 until the cell =bbb
if a5= bbb then copy a5 to c1 until the cell =ccc
if a8= ccc then copy a8 to d1 until the cell = ddd.........
View 1 Replies
View Related
Jun 16, 2009
I have formulas in cells B8:F8. I need to copy these formulas down based on the number of rows in column A that has data. The data in column A will vary based on user input.
View 2 Replies
View Related
