Convert Floating Point Number To Hex Representation
Mar 19, 2009convert a decimal number entered into a cell into its hex representation? 32-bit floating point representation.
View 10 Replies
ADVERTISEMENT
Convert Byte Array Containing Floating Point To Single
Sep 6, 2007I have a byte array that contains a 4 byte floating point number. How would I convert this byte array to the single typed floating point number it contains?
UDF For Floating Point Conversion Of 32 Bit Hex
Sep 18, 2009See here:
http://www6.uniovi.es/~antonio/uned/...-754hex32.html
This site allows me to enter a 32-bit Hexadecimal Representation and get Decimal Floating-Point result.
For instance, 4224A012 gives me 41.2.
Is there a UDF available to do this inside of Excel?
Floating Point Calculations Adding Values?
Jun 25, 2014Why the following (do it in the immediate pane) gets the wrong answer in VBA.
[Code] .....
this should return 0.1 but what you get is
9.99999999999996E-02
Converting A Number In Digits To Its English Representation
Jul 28, 2008a2 needs to contain a number (multiple of 10 10-90) and then d2 must contain a formula that gives that number in word form.
I need to do the same thing in b2 and e2, only with a number 20-99 not neccesarily ending in 0.
Add Decimal Point To Existing Number
Jan 17, 2009I need to add a decimal point to a column of numbers. For example, where it says 126 needs to be changed to 1.26, 3035 changed to 30.35, 13593 to 135.93 and so on. Can this be done automatically or with a formula?
View 2 Replies View RelatedCheck If The Number Have Two Decimal Point
Aug 20, 2009a1 -> 2.333.33 "i want this to return as 2,333.33"
a2 -> 33.33 "i want this to retun 33.33"
a3 -> 45.555.55 "i want this to return 45,555.55"
i already asked this question and someone gave me this code -> substitute(a1,".","",1) which return to 2333.33 but the problem is for the a2 if i use the code it will return as "3333" which read as "3,333".
Is there any way that we can determine if the values have two decimal point before it will run the command?
Calculate Number After Decimal Point?
Aug 19, 2013I am looking for a formula that will calculate the number after the decimal point, for example: A1=0.4656162 I want to multiple the number after the decimal point by A2=60, is there a simple formula to enable me to do this as I have to perform this across a large number of cells.
View 2 Replies View RelatedPictorial Representation Find Highest In The Cell
Mar 2, 2012pictorial representation find highest in the cell
data & output
Convert Or Format Decimal To X Digits Without Decimal Point
Aug 8, 2008I am trying to create a unique sample code by putting together the values of other cells that a user will input. It's all working well apart from the last part, where I am trying to include a decimal number. I want the decimal number to appear without the central "." and in a four digit format. e.g. 2.5 would appear as 0250, 14.25 would appear as 1425. This is the formlua I am using currently:
=IF(ISBLANK(B4),"",IF(LEFT(C4,1)="w",(B4&"-"&TEXT(F4,"YYMMDD")&C4&TEXT(G4,"HHMM")),(B4&"-"&TEXT(F4,"YYMMDD")&C4&LEFT(TEXT(H4,"00"),2)&RIGHT(TEXT(H4,"00"),2))))
However, where the value of H4 is 2.5, I am getting a result of 0303 (I've put this part in bold). I have attached a small spreadsheet to aid understanding.
Make Any Number Begin With Decimal Point
Mar 31, 2009I have a column that has values ranging anywhere from 1 to 999,999 and I need a way in vba to take whatever value is in the specified cell and place a decimal point at the far left. Example:
change 175526.34 to .17552634
change 376.1 to .3761
change 22987.254 to .22978254
when the code is run I need the selected number to begin with the decimal point.
See, the tricky part is that the length of the number varies and I cant just divide by X to shift so many places to the left..
Chart / Data Table Total Row Without Graphical Representation
Nov 8, 2011I'm trying to get a chart to show the Grand Total for the following rows without graphical representation. However, everytime the Grand Total is part of my dataset it appears as a stacked column. I do NOT want to see it as part of the chart.
Grand Total 10
A 3
B 2
C 5
As you can see the Grand Total line will be equal to adding up the one column of all rows in this chart. I can get the Grand Total line to appear in my data set, but everytime, it appears in my graph.
Determining If Certain Number Of Blanks Occur In Succession At Any Point In A Row
Jan 14, 2013I am trying to determine whether or not 26 blanks occur in succession in a row. Two example rows of data are listed below, where "_" refers to a blank cell:
2 _ _ 3 _ _ _ _ _ _ _ 4 5 6 3 4 _ _ _ _ _ 4
_ _ _ _ _ _ 7 8 13 2 3 _ _ _ _4 5 6 11 10 2
Hopefully you can picture the data from above. Anyway, there are multiple locations where a string of blanks occur. I'm looking for a formula that can test as to whether or not a certain number of blanks occur in succession during any part of the row.
Automatically Change The Point Name To Match The Point Name In Column
Dec 10, 2008I have a pivot table as shown below which is pretty straight forward however I am trying to create a macro that will automatically change the point name to match the point name in column E then copy that resulting dispaly to another sheet then pick the next point name in line and do the same thing and repeat for 50 rows, so my end result will be 50 pivot tables ready for printing. I can do this manually but I am trying to make it automatic...BTW the point names in column E change everyday but the pivot table supports the name changes.
Option Explicit
Sub PointName()
Dim Ws As Worksheet
Dim Rng As Range, Cel As Range
Set Ws = ActiveSheet
Set Rng = Range(Cells(2, 7), Cells(Rows.Count, 7).End(xlUp))
For Each Cel In Rng
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
Ws.Columns("A:B").Copy
Sheets.Add
With ActiveSheet
.Paste
.Name = Trim(Cel)
.Range("A1").Select
End With
Next
Ws.Activate
End Sub
I turned it off for a while and when I turned it back on I am getting an error
Unable to set the _Default property of the PivotItem class
Debugger is highlighting
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
Excel 2010 :: Convert Text To Number And Format Number Without 2 Decimal Places?
Oct 23, 2011I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.
[URL]
Get/Convert Number From Clipboard As/To True Number, Not Text
May 29, 2008Does clipboard method gettext retreive the text from clipboard only, not number? What if numbers are copied (Ctrl C) to clipboard?
View 9 Replies View RelatedConvert Number In TextBox To True Number
Nov 7, 2006i have this function that poulates data from a userform into a sheet.
For lLoop = 1 To MAWBNoVar
With Range("B" & Rows.Count).End(xlUp)
.Offset(1, 0) = Controls("txtMAWB" & lLoop)
.Offset(1, 1) = Left(Controls("cbDestination" & lLoop), 3)
.Offset(1, 2) = Controls("txtGW" & lLoop)
.Offset(1, 3) = Controls("txtCBM" & lLoop)
.Offset(1, 4) = "= ROUND(E" & Y & "*167,0)"
.Offset(1, 5) = "=IF(D" & Y & ">F" & Y & ",D" & Y & ",F" & Y & ")"
.Offset(1, 6) = "=IF(F" & Y & ">D" & Y & ",G" & Y & "-D" & Y & ",G" & Y & "-F" & Y & ")"
Y = Y + 1
End With
Next lLoop
My problem is that the data being entered into the sheet for the lines highlighted in red is going in as text, and not true numerics, so that the subsequent formulae are not working correctly.
Charts Stop Plotting Data Error Bars After Certain Number Of Data Point Selected
Dec 23, 2013In the attached document is a timeline made from a scatter chart. Error bars using custom values are used to show the length of each task, however I can't get the chart to include error bars for the last 2 data points (tasks).
View 1 Replies View RelatedData Representation - Minimizing Space Used To Visualize Data
May 21, 2012I am trying to minimise the space I use to visualise my data.
I have three data points:
£26 - (Min)
£45 - (The data point we are interested in)
£85 - (Max)
I want to represent this data in the following format:
How can I get Excel to do this?
Floating Textbox
Nov 1, 2008I have a textbox that constantly shows the contents of cell B1, a changing cell, as it is a total formula (to make my textbox display the contents of cell B1 I clicked on the textbox and then entered =B1 in the formula bar).
Trouble is, my textbox scrolls with the rest of my sheet and soon disappears from the screen. I need it to float on the screen and remain always visible when the sheet scrolls far up or down. How can I achieve that?
Or is there any other floating object that will constantly display the changing contents of cell B1? I’ve tried a textbox within a UserForm (which does float and remains always visible) but I cannot make that textbox display the contents of B1.
Floating Link....
Apr 7, 2009I wish to have a floating link in large spreadsheets that will always be visible and when clicked will return to a particular cell in that same spreadsheet.
View 2 Replies View RelatedFloating Message Box
Jul 8, 2009Is there any code available for a floating Message Box instead of Standard Message where by the user can scroll the sheet and decide to choose "Yes" or "No".
View 4 Replies View RelatedCreate A Floating Tab?
Feb 23, 2012if it is possible to create a floating Tab like you get on websites, so ehwn you move the spreadsheet to the left or right, the tab/shape with words in moves with you.
View 8 Replies View RelatedFloating Table
Jun 12, 2008I was asked by a co worker if there is a way to make a data table float b/w tabs or in other words, it would always be visible no matter what tab or location you are in a workbook.
My first answer was no, that he would need to create that table on each tab and freeze the panes so that it was visible no matter where he was in his workbook.
Floating Binary In Subtraction
Oct 13, 2008cell A1 contains the numeric value: 3961.3
cell A2 contains the follwing: ="z equals "&B3-3933.7
which i would expect to give me: "z equals 27.6"
BUT, it gives me: "z equals 27.600000004"
which is awefully strange becos the 4 comes form nowhere...
what makes some sort of sense is that if the value in A1 is changed to 3961.4 or 3961.5, then the final decimal 4 in A2 changes into a 3, and then a 2.
when the value in A1 is changed to xxxx.7 the number in cell A2 becomes what one would expect it to be.
how do i get rid of these strange decimals???
(formatting cells, setting number of significant figures does not work. i naturally already tried that)
Floating First Column In A Spreadsheet
Nov 24, 2008I am trying to get the first column to float down as you scroll down the spreadsheet to fill in information. How do I get that going. I can't figure it out.
I use excel 08, computers viewing the files are 03.
Floating Navigation Window
Sep 9, 2009I want to create a floating window in excel that can contain a series of macro buttons (12 total)
I'd like to see if this window can be opened with a hyperlink or a single macro button on a spread sheet.
Floating Bar Chart With Y Axis
Apr 16, 2008I have a dataset that looks like this ....
View 9 Replies View RelatedPie Chart Floating Values
Jun 20, 2007I have created a chart in a chart sheet (using VBA) - all well and good. Now I notice that if I place the mouse pointer over any of the pie slices, I see text similar to the following
Series 1 point "Swedbank" Value: nnnnnn (n%)
Now obviously (?), the name Swedbank is from the source data and the nnnnn (n%) are the values to be plotted. I'm wondering 2 things Can I "format" that text in any way, for example, so it shows Swedbank, value: nnnnn (n%)If I can, can I also format the numbers so that'll end up something like 1 234 567
File Open List In Floating Box
May 28, 2008is it possible to display the files open (the contents of the Windows drop down menu from standard toolbar) in a display that can be viewed at all times on a workstation. My reason for this is to monitor the files I have open to avoid trying to open a second copy and getting error reports from macros within. These error reports seem to frighten some of the users here and rather than read them and act accordingly they go for coffee and say thier system is down. It is my intention once I can get a system working, to introduce these people to monitor what they already have open, and more importantly what they do not need open at any particular time.
View 13 Replies View Related