I'm having a slight problem as I cannot find a way to translate the following code from my worksheet formula to VBA: =IF(LEN(A1)-LEN(SUBSTITUTE(A1,"-",""))=1,A1,MID(A1,1,FIND("-",A1,FIND("-",A1)+1)-1)). The code takes a value from one cell and takes the part that I need. There are two main types of inputs, they are in the form:
aaa-aaaaaaa-aaaaaa
aaaa-aaaaaa
The lengths are variable, but for the sake of showing you an example I have simplified it to the previous. The formula takes the part of the string that is before and after the first hyphen and puts it in the cell next to it.
I have a working formula that I want to convert to vba code... I only want to store the formula result in each cell in my range, not the formula itself. It is an ARRAY formula (entered with CTRL + SHIFT + ENTER) and it would be ideal if it could follow R1C1 format to keep it relative for each cell.
Here is the formula as it's entered in my spreadsheet:
I am not super familiar with using INDEX/Match combos which is why I am struggling with this one...
The end result should be:
For each cell in myRange cell.value = 'Formula result here Next cell
-OR-
If possible to fill the range in one step:
myRange.value = 'Formula Result Here, utilizing R1C1 relative reference... (this may be a stretch given the range is 55krows x 18 columns)
The problem at hand is I need to fill a range of approx. 999,000 cells with values and the values are a VLOOKUP with 4 matching criteria. So returning the value from Col U on my LookupTbl when the criteria in Col's A, D, Q, and R are an exact match to my values in A, D, Q, and Z:AQRow1.
I wanted to know if there is any way possible to get vba to insert a formula in a cell to each worksheet in each workbook in a folder and then using loop to extract all the info from each worksheet of each workbook in same folder into a master workbook?
Wondering where this code can be adjusted to be much more efficient. Right now it is going through 1000 rows and 14 columns and it is taking about 10 minutes. I eventually need it to go through 6000 rows and 32 columns..
I already stored the HexToDec(Cells(x, 1)) result to variable H2D and it didn't really make too much of a noticeable difference.
I created this code in Excel 2007 now i want to put it on my other users machines they are using Excel 2003 and i keep getting debug errors can someone help
Sub setup() ' Keyboard Shortcut: Ctrl+Shift+C 'add sheet Sheets.Add After:=Sheets(Sheets.Count) 'format headers With Range("A1") .Value = "Job Name" .Name = "Arial" End With With Range("A2") .Value = "Quote #" .Name = "Arial" End With With Range("A3") .Value = "Job #" .Name = "Arial"
I have very little experience with Excel. What I am trying to do is to convert a timecode in this format 00;22;21;00 that is 22 min 21 sec and 00 frames to a serie of numbers that I have hard time to figure out. Example
00;22;21;00 = 13410000000
I want to be able to paste the timecode from premiere 2.0 (00;22;21;00) into a Excel cell that would automaticly convert it to (13410000000) so that i can eventualy generate a .txt file that would look like this:
My question is about converting a Literal String to Character Code. I'm using the following coded InputBox. And it prompts the user for what characters to search for in a string.
I have a bit of code that is grabbing only the first 9 positions of an alpha-numeric string. The problem I am running into is that when the alpha-numberic value contains an "E", the code turns it into an exponential number in error.
For example, I have the following in column G: 01877E107000. When I run the code, it turns into an alpha-numeric value. The result should be 01877E107 (in column K). I tried using the text function within the code.
I have a userform that reads in a list of names into a combobox. When you choose a name from the combobox it then shows the that persons details from a sheet containing all the names.
I have some text boxes that allows the data to be modified and returns it to the sheet which works fine. What i also want it to do it put the data from the form into a sheet for that individual. For example the name of Ford would go into the Ford worksheet.
How do i read in the value from the combobox on the worksheet and use it as a variable to use in my code. For example
Sheets(Value from the combobox).Cells(NoOfRows, 3).Value = Me.TextBoxChangePosistion.Value
I have an excel document saved in a SharePoint document library. I then have another excel document where I created a connection back to the document being saved on SP (went to data connections->add->browse for more->enter the SP URL & found the document) and then opened that connection up as its own worksheet (existing connections->chose my connection). In the original worksheet (saved on SP), there are about 20 columns that are formatted as numbers. However, when I open the connection up in the new document, half of these columns are still number formatted, but the rest are being displayed as text EVEN THOUGH they are technically formatted as numbers (I right click->format cells & they are formatted as numbers). I can click into a cell and press enter and it will "come up to speed" and enter into number formatting, but as soon as I refresh my connection back to the original document, they go back to their text formatting despite the fact that the connection they are drawing from has them saved as numbers! Very frustrating. Its not a SP issue because I recreated the scenario by saving the original document to my computer and it did the same thing. I even went through one column in the original document and made sure there were no spaces saved to trigger the column to go to text- nothing.
taking a spreadsheet that has vertical repeating info in Column A and results in Column B and converting that to another sheet in a horizontal list. The main problem is that the repeating info in Column A may or may not always be the same for every customer; therefore, when it is placed in a horizontal format some cells may or may not have results. I tried a arbitrary lookup. Here is the formula I used:
I have an excel work book where in one page (sheet1) contains formula types to be used based on a code. and in the other page (Sheet 2) when I enter the code I need it to get the formula from 1st page and then do the calculation in the second based on the code. Ex : Sheet 1
Code Formula 0 Cell A * CellB 1 Cell B - Cell A*5% 2 (Cell A + Cell B)*10%
I hope you got the picture. The problem is I'm not sure how to take only the formula from 1st sheet and then use it in the 2nd sheet to do the calculation. I wont mind using a form for this even.
I have a column with names, where i need the 1st letters of the Names to be displayed in CAPS. If its a Single letter also, the same should be displayed in CAPS
I have two sheets, the first called 'AF' and the other called 'POR'. For one of the columns in the 'AF' sheet I used the following formula - VLOOKUP(B2,POR!$A$2:$A$111254,1,FALSE) to retrieve a string consisting of 7 numerical digits (Ex. 4678451). Now if I want this result of 7 digits in the same 'AF' sheet to be converted to the word "YES" - how do I achieve this? (All the 7 digits numbers are different or unique). Is there some sort of REPLACE command I use here or some other means?
I have whole bunch of formula's added to cells by code. So far so good. How could I then set in macro code that the result is stored in cell as value rather than formula? Now when I go to cell you can see =PIBVSearch(.... yadda yadda yadda in the field above.
I would prefer to change it so that content of cell changes to it's value so there's no formula visible(and above all not stored to harddisk(LOTS of disk space lost. Whole project started to trim down 269Mb excel file into smaller piece! I don't want it to go back there too easily...) or in danger of getting updated which might take a very long time easily).
Code works so that as long as there's rows which haven't got update yet but do have product run code(or something like that. Not quite sure what that number is but I figure it's product run) after code reached that far(which it copied from another file). Then for each row it calls functions for each cell which are responsible for filling invidual cells.
So either way to replace content of whole row with values or invidual cells, I can insert both into loop easily though whole row after cells are calculated would be a) faster to add(just one place to add, not 30...) and likely faster to run(project is about getting the file to run faster afterall...).
I am having trouble converting the following Countifs formula developed in 2007 to work in 2003 Excel.
Basically, I want to count the frequency of "N" in 'Data_Q2 2008'!$S$2:$S$9806, where 'Data_Q2 2008'!$B$2:$B$9806 = 'Metric Upload'!C2.
'Data_Q2 2008'!$B$2:$B$9806 is a list of physicians. 'Metric Upload'!C2 is a pick list for selecting the physican that is in the larger data set using Data Validation.
Looking for a formula to convert time (00:00:00 AM) to a general 4 digit number (0000). Example 08:30:00 AM ---> 0830. Tried using format cells but no luck.
I was able to convert a standard number to time using the following formula: =TIME(INT(H2/100),MOD(H2,100),0)
I have a paper-based scoring sheet that we use to determine a rating category. I cannot figure out how to convert this scoring sheet into a lookup region and use some type of LOOKUP formula to determine the rating. I have looked at the various Grading examples on the Internet that show you how to look up a grade, based on a score, but they only look up a grade, based on a single input (the score).
Here I have two values going in--the person's age and their score, and I need to look up the rating, which is the column heading.
Can anyone point me in the right direction?
I've attached a sample spreadsheet which shows the original scoring sheet.
I have attendance tables that has column Y showing the shift to be worked and column Z showing any absentees. I used the following formula to count the number of people off per period.
I am copying data from worksheet "Microsoft" to another workbook and paste in sheet1, i want the cell G1 to auto input the worksheet name "Microsoft" where i copy the data from,
How to have G1 show the worksheet name after i copy and paste the data from worksheet name "Microsoft".
