Copy Non-Contiguous Range & Paste To Last Used Row
Aug 31, 2007
I am trying to have this loop go through colums of data and compare columns 3 and 4. Where there are differences, parts of the row are copied and pasted in a summary table.
My problem is the output to the summary table.
How do I control which cells in the row are copied? (I only want to copy columns 1, 3 & 4)
How do I control where the copied cells are pasted to?
Sub Change()
Dim r As Long
'Loop to Compare Values
For r = 4 To Cells(Rows.Count, 1).End(xlUp).Row
'Looks For Funds That Upgraded
If Cells(r, 4) < Cells(r, 3) Then
'Highlights the row
Cells(r, 1).Resize(1, 5).Interior.ColorIndex = 34
'Copies The Applicable Cell Over Into Column 7
Cells(Rows.Count, 7).End(xlUp).Offset(1) = Cells(r, 1)
'Places a note into column 5
Cells(r, 5) = "UPGRADE"
End If
If Cells(r, 4) > Cells(r, 3) Then
Cells(r, 1).Resize(1, 5).Interior.ColorIndex = 36
Cells(Rows.Count, 7).End(xlUp).Offset(1) = Cells(r, 1)
Cells(r, 5) = "DOWNGRADE"
End If
Next r
Columns("G:G").EntireColumn.AutoFit
End Sub
View 9 Replies
ADVERTISEMENT
Mar 13, 2008
I need to make the data in cells f4:f7 skip a row as shown in column D. How can I do this without doing a long and tedious cut and paste as I have over two years of data to reformat. Is there a code or some type of auto-format setting I could use?
View 3 Replies
View Related
Jan 31, 2014
I want to paste a group of non-contiguous cells, and paste the values elsewhere on the sheet while maintaining the same relative position. is this possible via macro somehow?
for example, in column A i want to copy A1,A2,A5,A9; and paste into D1,D2,D5,D9 in one step.
View 9 Replies
View Related
Mar 18, 2014
I use to have a macro that could copy formulas from non contiguous ranges and paste the values in the same cells. So for example, I could select a non contiguous range like B5:B10, E10:F12, and G1:G10. The macro would then copy and paste the values in those 3 ranges, so those 3 ranges would be values instead of formulas.
I think it worked by storing each range and then looping through each range to copy and paste special values.
View 2 Replies
View Related
Feb 14, 2008
I am trying to copy paste info from one sheet to another, however, I would like to select where the information is to be pasted, not have it go to a predetermined cell or column.
Here is the code I have so far that works fine, but it requires a macro for each column I would like to paste to.....
View 6 Replies
View Related
Aug 24, 2008
I want to be able to copy cell D4, I4, G10, G12 etc from one spreadsheet and paste into another spreadsheet in the same locations as the source.
Is there a macro that will do this?
View 9 Replies
View Related
Dec 18, 2012
Copying and pasting into non-contiguous cells.
I want to be able to filter my data set, so for example I can filter column A for the value Berkshire, I then want to be able to select all the Berkshire's in Column A (not a problem, simply select them and copy), but I then need to be able to paste them into column B, so they appear in exactly the same rows as they do in Column A, but this doesn't work, it pastes them into hidden cells as well.
I've tried the Alt + ; (Visible Cells Only) option, followed by copy and paste and this makes no difference.
I have over 20,000 rows of data to filter, then copy the relevant cells and move to the same row in another column and currently I'm having to move the cells one by one which is ludicrous.
View 1 Replies
View Related
Mar 16, 2013
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
View 4 Replies
View Related
Oct 7, 2009
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies
View Related
Oct 2, 2008
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies
View Related
Feb 19, 2008
I have been struggling for a while to copy data from one worksheet to another and reset the target range.
The copy bit is cool, the range resetting bit is not. I have tried various methods, but none seem to work.
For example, the below code generates an error: "Compile error: Argument not optional"
I have stuck the particular command button script below to let you see what I am trying to do:
Private Sub cmbFilter_Click()
Dim sCriteria As String
On Error Resume Next
View 4 Replies
View Related
Mar 3, 2008
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "UnProtectAll"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
View 4 Replies
View Related
Feb 24, 2013
im currently using a Code that copies a visible range from one workbook and pastes that Range to another workbook. I dont like it though because every time it pastes the screen jumps.
I tried setting Range 1 = Range 2, its not giving me an error but its not "pasting" the information to the 2nd workbook.
I know ive done it before by doing each cell in each row individually but a its a big Data Table and that would take too long.
View 3 Replies
View Related
Jul 16, 2009
I am using the code below to copy a range and paste it over a variable range.
View 4 Replies
View Related
Apr 9, 2014
From E15:E150
Start with E16 and if it is blank than make it the same as the value above (If E16 is blank than E16 would have value of E15)
If it has a value than skip and go to next.... all the way through E150.
So an example would be:
E
15 ABQ
16
17
18 MFE
19 AUS
20
21 HOU
22
23
24
25 ATL
26
and so on
Would look like this after macro
E
15 ABQ
16 ABQ
17 ABQ
18 MFE
19 AUS
20 AUS
21 HOU
22 HOU
23 HOU
24 HOU
25 ATL
26 ATL
and so on
View 5 Replies
View Related
Sep 21, 2005
can somone tell me why the attached code will not work it works for the first
range only but when others added it fails also how do you clear outline of
copied cells, i used range ("D9").Select but no good.
-- Private Sub Workbook_Open()
Workbooks("Staff Details").Activate
Range("I4:I10")("C4")("C9")("G9").Select
Selection.Copy
Worksheets("Payslip").Activate
Range("B2:B8", "C11", "K11", "K12").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone,
SkipBlanks _
:=False, Transpose:=False
Range("D9").Select
End Sub
BD3
View 10 Replies
View Related
May 8, 2007
I need to paste in sheet2 in rows 8 to 19
Rows 1 to 7 in sheet2 might stay empty.
[A20].End(xlUp) takes care of the 19th row .. how can I adjust the range to start at row 8 ?
Sub CopyBoldCells()
Application.ScreenUpdating = False
Dim rng As Range
Range("A1:A10").Select
For Each rng In Selection
If rng.Font.Bold = True Then
Rows("" & rng.Row & ":" & rng.Row & "").Copy
Sheets("Sheet2").Select
[A20].End(xlUp).Offset(1, 0).Select
ActiveSheet.Paste
Sheets("Sheet1").Select
End If
Next rng
Application.ScreenUpdating = True
End Sub
View 9 Replies
View Related
May 15, 2008
I need some code that will copy cells A20:D20 then cut and paste in then paste in the next available row below (some rows below may be taken)
View 9 Replies
View Related
Sep 5, 2007
how to reference an entire column only knowing the column numbers, not letters. The response below was given.
Range(Cells(1, 40), Cells(1, 44)).EntireColumn.Select
I have a similar situation, except that I use the FIND command to return a column number based on a string match.
X_Column = Sheets ("Sheet1").Range("A1:IV1").Find("X").Column
Y_Column = Sheets ("Sheet1").Range("A1:IV1").Find("Y").Column
Z_Column = Sheets ("Sheet1").Range("A1:IV1").Find("Z").Column
Because of this, I can recieve non-sequential column numbers, simply based on where "X", "Y" or "Z" are in the sheet, which can be anywhere. I would like to select X_Column, Y_Column, and Z_Column and copy/paste to another sheet, hopefully without having to loop. I have a feeling that an answer refering to Named Ranges is coming, but I'm very green on the subject.
View 4 Replies
View Related
Apr 10, 2014
I want do copy a range and paste to a specific range. So if the copy selection is larger I don't want it to paste the rows that don't fit.
With this code it copy a range and paste even outside my given paste range.
VB:
Range("F33:H60").Select
Selection.Copy
Sheets("7211").Select
Range("F33:H40").Select
ActiveSheet.Paste
View 4 Replies
View Related
Apr 25, 2014
I am using below code to copy certain data(Range("C4:R46")) and paste after certain row(After 43 rows) with 50 times
I want to popup a inputbox who asked for how many time u want to paste data, if i choose 4 then paste data after certain row(After 43 rows) with 4 times
If I choose 14 then paste data after certain row(After 43 rows) with 14 times
[Code] .....
View 4 Replies
View Related
Sep 25, 2009
i facing another problem at here and do not know how to write the part of coding. it is pending for 2 weeks. i do not know how to explain so i attach the excel to explain. i hope can get any reply soon.
View 2 Replies
View Related
Dec 16, 2009
I have the following code which copies and pastes a range of cells in a row from one sheet to another if a condition is met:
View 9 Replies
View Related
Nov 3, 2011
I have a code that copy and paste a productlist into one sheet.
Is it possible to do this for three sheets all in one operation? I have read about the grouping, but doesn't that affect the whole sheet, so if I write something in one sheets cell, it will be sent to the others at the same time?
Code:
Sub CopyProductlists()
'Set **** = Worksheets("Sheet1")
RAnge("B1").Select
[Code]....
View 3 Replies
View Related
Dec 17, 2011
Proficient in Excel, very new to VBA. Up against a deadline on a project that entails consolidating data from 30 + workbooks (each of which has 3-5 worksheets; layout is the same in all worksheets) into one consolidated "rollup" workbook. The inefficient way would be to move all the worksheets into one master workbook, and then link each cell to each worksheet, one-by-one. I found a few threads online with some vba code that has me "close" to what I need to accomplish, but not close enough. The code below will take each worksheet in the workbook and bring back the data in a range of rows and columns. That is not what I need. I only need to bring back SELECT cells of data (i.e. cells E5, H12, J19, etc.) - not everything in that range.
Sub CopyRangeFromMultiWorksheets()
Dim sh As Worksheet
Dim DestSh As Worksheet
[Code].....
View 9 Replies
View Related
Jul 4, 2012
I created the following code to copy the contents of b6 down. However, I need to modify the code to copy this formula =IF(M6=calculations!$E$34, N(B5)+1,N(B5)) down the range.
Sub copyformulas()
'copy and paste cells with formulas down. Select B6 throubh AH6 and copy the formulas down to the last employee ID.
Dim lr As Long
For Each SheetName In Array("All employees annualized", "All employee salary", "All employee hourly", "allmaleee", "allfemaleee", "cohort analysis", "minority", "nonminority")
With Worksheets(SheetName)
lr = .Cells.Find(What:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row
.Range("b6:b").AutoFill Destination:=.Range("b6:b" & lr)
End With
end sub
View 2 Replies
View Related
Jul 31, 2012
I have a range A3:E70 where A3:E69 have the same formatting and the text in A70:E70 is bold. I want to copy-paste the entire range a number of times with a for ... next-loop. Actually, it's kind of a template system. I make the template A3:E70 and uses it a number of times.
View 2 Replies
View Related
Oct 15, 2012
I have a macro that allows me to copy the value of a dedicated cell (I4) and paste it at the start of a range (N4:S4) via a Form Button. When the cell (I4) value changes, I can run the Macro again and it will enter the new value in the next cell along in the range.
This works well across one row. What I would like to do is use this arrangement on more rows. The ranges would be directly underneath eachother.
Is there an easy way of doing it? Or will I have to write out a new Macro for every row?
View 9 Replies
View Related
May 8, 2013
How can I copy cell B13 and paste it to all the cells in range H13:Q34?
View 2 Replies
View Related
Nov 30, 2006
I am trying to take a range ("a5:k23") of data in a sheet name Kelly and paste that data at range ("a1") in Sheet4 when the numbers change in cells "(K3") and "(J3") in the Kelly Sheet. When the numbers change, I want this to automatically paste and paste special. Since there are some conditional formats with color, I want to first Paste and then Paste Special the range of data.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("k3") = 1 And Range("j3") = 10 Then
Range("A5:K23").Select
Selection.Copy
Sheets("Sheet4").Select
Range("A1").Select
ActiveSheet.Paste
Range("A1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Sheets("KELLY ").Select
Range("F2").Select
View 9 Replies
View Related