Copy Non-Contiguous Columns
Sep 5, 2007
how to reference an entire column only knowing the column numbers, not letters. The response below was given.
Range(Cells(1, 40), Cells(1, 44)).EntireColumn.Select
I have a similar situation, except that I use the FIND command to return a column number based on a string match.
X_Column = Sheets ("Sheet1").Range("A1:IV1").Find("X").Column
Y_Column = Sheets ("Sheet1").Range("A1:IV1").Find("Y").Column
Z_Column = Sheets ("Sheet1").Range("A1:IV1").Find("Z").Column
Because of this, I can recieve non-sequential column numbers, simply based on where "X", "Y" or "Z" are in the sheet, which can be anywhere. I would like to select X_Column, Y_Column, and Z_Column and copy/paste to another sheet, hopefully without having to loop. I have a feeling that an answer refering to Named Ranges is coming, but I'm very green on the subject.
View 4 Replies
ADVERTISEMENT
Jun 9, 2008
Consider the following range (in my case a PivotTable):A1:E7
I create a Named Ranges that corresponds to column 1:3 and 6 from the range above. i.e : A1:C7,E1:E7
I need to find out the number of columns of my range, this is because it can change in the future, and I have an offset formula needing this information.
When i type =columns(MyNameRange) it returns #REF! as there are 2 areas in my Named Ranges. I am expecting 4.
I have written the a VBA User Defined Function that does the job, but I would like to know if there is no native solution to get this information.
Function TotColumns(rng As Range)
Dim Cols As Integer
For Each Ar In rng.Areas
Cols = Cols + Ar.Columns.Count
Next
TotColumns = Cols
End Function
View 7 Replies
View Related
Jan 1, 2009
I'm trying to sum cells which meet certain values in non-contiguous columns. It's difficult to explain so I've attached a sample wookbook.
View 3 Replies
View Related
Sep 12, 2013
If I select a group of non-contiguous cells with control shift is there any way that I can shift the same selection over to the next column. For example, I have A4 and A8 selected. When I press shift and right arrow it doesn't work.
View 4 Replies
View Related
Aug 9, 2006
I have a spreadsheet named PRODUCTS and in row A there are a bunch of product codes. I would like for the user to be able to use the CTRL and mouse to select all the products that they want and then once they push that button I would like it to paste the user selected cells into a sheet called Quote starting at A7.
View 4 Replies
View Related
Aug 31, 2007
I am trying to have this loop go through colums of data and compare columns 3 and 4. Where there are differences, parts of the row are copied and pasted in a summary table.
My problem is the output to the summary table.
How do I control which cells in the row are copied? (I only want to copy columns 1, 3 & 4)
How do I control where the copied cells are pasted to?
Sub Change()
Dim r As Long
'Loop to Compare Values
For r = 4 To Cells(Rows.Count, 1).End(xlUp).Row
'Looks For Funds That Upgraded
If Cells(r, 4) < Cells(r, 3) Then
'Highlights the row
Cells(r, 1).Resize(1, 5).Interior.ColorIndex = 34
'Copies The Applicable Cell Over Into Column 7
Cells(Rows.Count, 7).End(xlUp).Offset(1) = Cells(r, 1)
'Places a note into column 5
Cells(r, 5) = "UPGRADE"
End If
If Cells(r, 4) > Cells(r, 3) Then
Cells(r, 1).Resize(1, 5).Interior.ColorIndex = 36
Cells(Rows.Count, 7).End(xlUp).Offset(1) = Cells(r, 1)
Cells(r, 5) = "DOWNGRADE"
End If
Next r
Columns("G:G").EntireColumn.AutoFit
End Sub
View 9 Replies
View Related
Mar 13, 2008
I need to make the data in cells f4:f7 skip a row as shown in column D. How can I do this without doing a long and tedious cut and paste as I have over two years of data to reformat. Is there a code or some type of auto-format setting I could use?
View 3 Replies
View Related
Sep 9, 2006
I would like to be able to count the amount of entries in column C and depending on the amount group them in either groups of 3 or 4, all names would be unique...so if there are 14 names in the list they would need to be grouped in to two groups of 4 and two groups of 3, if there were 19 then 4 groups of 4 and 1 group of 3 etc to a maximum 50 people, the results could appearon a seperate worksheet say pasted on to the worksheet starting with the groups of 3 (so paste a group of 3 then skip 3 rows then paste groups of 4 skip 2 rows, the row skipping is to allow seperation and manual entry of extra data). There will never be groups of 5 or more and never less than 3
View 8 Replies
View Related
Jan 31, 2014
I want to paste a group of non-contiguous cells, and paste the values elsewhere on the sheet while maintaining the same relative position. is this possible via macro somehow?
for example, in column A i want to copy A1,A2,A5,A9; and paste into D1,D2,D5,D9 in one step.
View 9 Replies
View Related
Aug 24, 2008
I want to be able to copy cell D4, I4, G10, G12 etc from one spreadsheet and paste into another spreadsheet in the same locations as the source.
Is there a macro that will do this?
View 9 Replies
View Related
Apr 10, 2013
However I have a subject at uni that requires me to create a series of regression models, histograms, correlation matrices etc.
For part of the assignment, i have to run 4 regressions (one for men & one for women) with dependent variable as average wages, and independent as bfast 1,2,3 and dinner 1,2,3 (all of which are dummy variables) (0 for male and 1 for female).
The second two regressions are exactly the same, except average wages must be transformed into log which i have already done.
I dont know how to differentiate the regression models into male and female (if possible). We must also include residuals and residual plots.
I keep getting an error that says non-numeric data, the other says input range must be a contiguous reference.
View 1 Replies
View Related
Nov 4, 2013
I have a non-contiguous range of cells that contains Values, Formulas, Text or Dates. In some cases a field containing a value could instead contain a formula depending on who is filling out the form and/or what information is known. For example, a cell might contain a value, i.e. Utilities, and I might either know the total ($76,310), or I might need to perform a calculation right in the cell to obtain the total (=54236+9587+12487).
My goal is to be able to copy the information contained in this non-contiguous range to the right some 52 columns (this is a safe temporary storage location) and then be able to copy it back should I need to.
One other problem may be that the source cell might be a merged cell.
Since I cannot determine whether the information is going to be a value or a formula, and I have some text and date formats to copy as well, is there some way to copy this range and keep the data regardless of format?
My Range might look like: (F4, C5, D6:D7, D9, D13:D15, D17:D18, D22:D25, D27:D30)
F4 is a date field, C5 is a merged cell holding text, D6 is the Utilities field described above. The other fields are all formatted as dollars or percentages.
View 7 Replies
View Related
Mar 18, 2014
I use to have a macro that could copy formulas from non contiguous ranges and paste the values in the same cells. So for example, I could select a non contiguous range like B5:B10, E10:F12, and G1:G10. The macro would then copy and paste the values in those 3 ranges, so those 3 ranges would be values instead of formulas.
I think it worked by storing each range and then looping through each range to copy and paste special values.
View 2 Replies
View Related
Dec 30, 2008
when i copy columns resulted from another columns operations and paste in new sheet i got garbage ,could you tell me why and how to overcome this problem.
View 2 Replies
View Related
Aug 6, 2009
Example:................
The key point is that I have over 400 columns grouped in three, offset by one row down for each (this is due to a different formula I have working). Each column is 60 numbers long (not including empty cells above data). I want to copy all of these columns into a single set of three columns on another sheet (Sheet2). (These will be the fifth, sixth, and seventh columns, E, F, and G. If it would be simpler, I could simply copy the third of each set of columns on Sheet1 (C, F, I) to column G of Sheet2. Then there would be a total of 144 columns being copied (60 numbers per column).) All of this copying has to be values-only as the original columns consist of formulas referencing outside cells. Sheet2 should look like this:.............
View 7 Replies
View Related
Jun 7, 2006
I have 2 worksheets in which I have to copy one column of cells from one to
the other. The problem is that the "main" worksheet lists nearly 3,500
clients and I have to copy numbers into the "main" worksheet on weekly basis
from another worksheet that lists only about 1,100 of those 3,500 clients.
Both client lists are in alphabetical order, but I obviously cannot just copy
one column into the other, because then the numbers won't be matching the
correct clients.
View 10 Replies
View Related
Apr 21, 2007
I have 2 workbooks (workbook1 & workbook2). Information in column A and column N must match both workbooks per row/ cell (ie. if A2 and N2 in workbook1 match workbook2, copy information from 3 other columns (S, T, U from from workbook1 into workbook2 - cells S2, T2, U2). Workbook2 may have information in column S, T, U, but I need to over-write it with the information from workbook1. If the information does not match per that row/cell (ie. A2 in both worksheets are the same, but N2, they are not, so go to the next line that does match and copy the information into worksheet2). I do not want to use a V- lookup for this problem. I really need a marco.
View 3 Replies
View Related
Jun 24, 2008
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
View 3 Replies
View Related
Dec 4, 2012
I have a rather large database that I'm trying to automate colours in, based on data that is inserted into Column 'D'. I've used the following code (with some success), but it colours columns that I don't want to colour:
VB:
Sub KeyCellsChanged()
Dim Cell As Object
For Each Cell In Range("D1:D5000")
[Code].....
That works fine - but the problem I have is that I only want to colour columns A:N, Q, T, V, AB:AE, etc. (random columns and not always together). I have already tried to replace parts (as follows), but get all sorts of errors (in particular Run-time error 1004):
VB:
If Cell = "Rabbit" Then
Cell.Range("A:N,Q, T, V, AB:AE").Interior.ColorIndex = 42
Is there someway that a line of code can determin which cells to colour in the row, or alternatively code that will colour the columns a specific colour and make them stay that colour when the first code above is used?
View 3 Replies
View Related
Jan 8, 2006
Range:
C3,C14,C25,C34,C41
Criteria:
>0
sum-range:
C3,C14,C25,C34,C41
I can't get that to work since the commas in the range are throwing the function off.
View 14 Replies
View Related
Dec 24, 2008
I want to get the average of various non-contigous columns, ex:
Column B G X Z
10 0 6 8
However, I need to exclude any zero values. In this case the correct average is 8. I have used various sumif's and Average(IF) functions without success.
View 5 Replies
View Related
Apr 2, 2009
I can find the min value excluding zero in a range of contiguous cells, but how can I do it if the cells are A1, A3, A25, A67, etc?
View 9 Replies
View Related
Dec 18, 2012
Copying and pasting into non-contiguous cells.
I want to be able to filter my data set, so for example I can filter column A for the value Berkshire, I then want to be able to select all the Berkshire's in Column A (not a problem, simply select them and copy), but I then need to be able to paste them into column B, so they appear in exactly the same rows as they do in Column A, but this doesn't work, it pastes them into hidden cells as well.
I've tried the Alt + ; (Visible Cells Only) option, followed by copy and paste and this makes no difference.
I have over 20,000 rows of data to filter, then copy the relevant cells and move to the same row in another column and currently I'm having to move the cells one by one which is ludicrous.
View 1 Replies
View Related
Mar 23, 2009
I have a spreadsheet that I have developed at work to track sales related data. As part of the reporting for this data, it is sorted by date. I have been asked to capture some additional related data and due to the structure of the spreadsheet(that has been in use several months with no issues) I can not put the additional data in adjacent columns without doing a complete redesign of the format.
I can place the data several columns away.... The data "in the middle" is static and is used for other calculations and should not be sorted. Is there a way to sort both ranges of data WITHOUT disturbing the columns separating them and keep the proper relationship with the data?
See attached for a very simple example. In this data set the "original" data was in range A2:E11 the "New" data is in Range I2:M11. It would make life simple if I could do something like this (but it sorts everything in between)
View 2 Replies
View Related
Jan 8, 2006
range:
C3,C14,C25,C34,C41
criteria:
>0
sum-range:
C3,C14,C25,C34,C41
I can't get that to work since the commas in the range are throwing the
function off.
View 13 Replies
View Related
Aug 17, 2012
I know how to find the last row of a continuous range. it's simply:
Code:
someRng(someRng.Count).row
How do you find the last row of a non-contiguous range though? Assume the range is vertically laid out and I don't want to do any looping.
View 9 Replies
View Related
Jan 13, 2008
Hoja1 ABCDEFGHI1J J D 1 22G J D 0 Spreadsheet FormulasCellFormulaG1=SUM(COUNTIF(INDIRECT(ADDRESS(ROW(),1)),"J"))I1=SUM(COUNTIF(INDIRECT({"A1","C1","E1"}),"J"))G2=SUM(COUNTIF(INDIRECT(ADDRESS(ROW(),1)),"J")) Excel tables to the web >> Excel Jeanie HTML 4
Its not work
=SUM(COUNTIF(INDIRECT({ADDRESS(ROW();1);ADDRESS(ROW();3);ADDRESS(ROW();5)});"J"))
It's not work
........TIF(INDIRECT("{"""A"&ROW()&""";"""C"&ROW()&""";"""..........
I'm not interesting SUMPRODUCT solution, because I know this solution
I want a EXTENSION VARIABLE ROWS of teh JPG formula ( for "copy down")
View 9 Replies
View Related
Apr 8, 2008
Is it possible to re-size a non-contiguous range? I'm guessing "no", and a Google trawl hasn't provided me with anything.
Here's what I'm trying to do:
dim mult_rng as range
dim rng2 as range
set mult_rng = range("A1:B1,D1:E1")
set rng2 = mult_rng.resize(rowsize:=10)
That is, my original range is comprised of non-contiguous cells in the same row. When re-sizing, I'm trying to increase the number of rows, but leave the columns the same.
Like I said, my gut instinct says that this isn't possible using the 'resize' property. Can anyone think of another method to use? My constraints are that the original mult_rng isn't always the same (and isn't always non-contiguous).
View 9 Replies
View Related
May 1, 2008
I'm struggling to find a way to reference a non-contiguous range of cells in the IRR function. I've got the initial cost in one cell (b17), and the annual cash flows in a single row (c12:w12), separate from the cell containing cost.
View 9 Replies
View Related
Dec 22, 2008
I execute custom Insert and Delete macros whenever when the user has selected a single contiguous range of rows to insert or delete.
But I don't know how to detect if the user has selected multiple, non-contiguous rows. Is there a way to detect this situation, and if so, is there a way to "loop" through the individual selections?
View 9 Replies
View Related
