Copy Sheets("data").range As Values Only
Apr 12, 2007
I just need to copy the values
Dim LastRow As Long
If WorksheetFunction. CountA( Cells) > 0 Then
'Search for any entry, by searching backwards by Rows.
LastRow = Cells.Find(What:="*", After:=[A1], _
SearchOrder:=xlByRows, _
SearchDirection:=xlPrevious).Row
MsgBox LastRow
End If
' copies SUSD_DATA to SUSD Database
Range("SUSD_DATA").Copy Sheets("SUSD Database").Range("b" & LastRow + 1)
' copies SUSD_DATA to SUSD Database
Range("Defects").Copy Sheets("Defects Database").Range("b" & LastRow + 1)
View 3 Replies
ADVERTISEMENT
Feb 26, 2012
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
View 2 Replies
View Related
Dec 18, 2012
I have a sheet (SHEET1) with a EAN code and a empty column I need to get a colour into from sheet 2.
I have to match EAN codes in Sheet 1, (Column X) with Sheet 2(Column E) and then pull the description from the corresponding row in Sheet 2(Column D).
I am sure I can use the VLOOKUP formular but I dont know how to input the code?
=VLOOKUP(lookup_value,table_array,col_index_num,range_lookup)
View 2 Replies
View Related
Feb 2, 2009
I want to locate the corresponding acct number between worksheets “primary_data” and “qty_movement” and once a match is found (from acct worksheet) then copy over the acct numbers and the share data to the results page. If there is no match I don’t want anything copied to the results page, just ignore that data on either worksheet “primary_data” or “qty_movement”.
•Both ranges on “primary_data” and “qty_movement” worksheet are variable, as accts are left off or kept on depending on the daily activity so the ranges are never set.
•I need to concatenate on “primary_data” worksheet cells A&B&C to get acct number
•concatenate on “qty_movment” worksheet cells B&C (need to keep zeros in front of actual numbers for acct number reasons)
•these accts need to be cross referenced as the accounts on the “acct” worksheet (pre-populated with corresponding acct numbers that never change and will always be on that worksheet)
•If a match is found on the “acct” sheet then I would like it to either replace the acct so they match on both worksheets or just to recognize those accounts correspond with each other and do the below.
•then take the 2 concatenated acct numbers off of “primary_data” and “qty_movement” in the I cells and copy them over to the “results” worksheet as well as the share data from “primary_data (column E)” and “qty_movement(Column D)” and then compare the 2 share amounts on “results(column E)”
i need to elaborate on anything, the attached sample sheet shows what i want to do, but without any formulas or code.
View 5 Replies
View Related
Apr 14, 2008
I've come across the post by Dangelor but can't reply to it directly so have started a new thread quoting the code. I'm trying to select entire rows of data based on specific values in a column and then paste those rows to a new worksheet.
This code loops 10 times and creates 10 new sheets. Any chance someone could explain some of the code to me and adapt it to suit my situation?: Data will be in sheet 1 ("Data List"). I want search down the rows and if the value in column 2 is "1" copy that row to the sheet named "Heat 1", if the value is "2" then copy that row intt the sheet "Heat 2", etc.
Sub FindandCopyRows()
Dim Data As Variant
Dim DataFound() As Variant
Dim iValue As Integer
Dim j As Long
Dim i As Integer
Application. ScreenUpdating = False
For iValue = 1 To 10
With Worksheets("Main") 'change name as needed
.Select
Data = .UsedRange.Value
End With
Redim DataFound(1 To UBound(Data))
For j = 1 To UBound(Data, 1)
On Error Resume Next......................
View 2 Replies
View Related
Jan 24, 2014
I am trying to come up with the most efficient way to copy data to multiple sheets within the same Excel workbook. The original data exists within one column on a summary sheet (could have up to 500 individual entries). I want to copy each individual entry to a unique sheet (that already exists), but in the exact same cell location within each sheet. I would only want to copy the original data value and not any formatting. Is there an efficient way to do this?
In my example spreadsheet, the original data is on the SUMMARY sheet. Sheets A through J would be the target sheets, with cell B2 as the target location for each of those sheets. My example shows the result of a manual copy paste value process, but I am hoping to automate that.
View 14 Replies
View Related
Aug 29, 2008
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
View 7 Replies
View Related
Sep 1, 2006
Does anyone know of a line of VBA code that selects all sheets in the workbook (including hidden sheets)?
View 9 Replies
View Related
Jun 5, 2014
I have set of user-form contains with Combox & 2 textbox and to generate report one cmd button
I have 3 different sheet contains report of daily activities ( Dispatch,Closed,Cancel)
If Dispatchcalls Select In Combobox1 ,Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from dispatchcalls Then Save Data Into Excel File As "Dispatchcalls".
If Closedcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Closedcalls Save Data Into Excel File As "Closedcalls".
If Cancelcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Cancelcalls Save Data Into Excel File As "Cancelcalls".
"C:UsersmaniDesktopNew folderLenvo_ReportsONSITE CasesVlokupuf" This is path i stored existing 3 file dispath,closed,cancel
View 3 Replies
View Related
Aug 9, 2013
I am trying to make some sheets with football teams from one championship and their results. For example i will have a match between TeamA vs. TeamB that will end 0-0. I will enter this value in the sheet for the TeamA results but normally this value will also be found in the results sheet of TeamB.
My question is, how can i make excel copy this value once i enter it for TeamA in the results sheet for TeamB.
View 2 Replies
View Related
Aug 9, 2007
I have a macro that copies 2 worksheets of an open workbook "Combined Sales Tool" and saves those 2 sheets in the root of the C drive with a variable name.
I want to know how I can #1 close the newly created workbook, #2 focus back to the original workbook "Combined Sales Tool", hide the 2 sheets that were copied to the new file, then close the original workbook with (and for example without) saving
part of my code below:
Sub esummary()
Dim OutApp4 As Object
Dim OutMail4 As Object
Dim cell As Range
Dim filedoc As String
Dim intFreeRow
Dim emailatt4 As String
Sheets("Summary").Visible = True
Sheets("Email").Visible = True
Sheets( Array("Summary", "Email")).Select
Sheets("Summary").Activate
Sheets(Array("Summary", "Email")).Copy
Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Application.CutCopyMode = False
View 4 Replies
View Related
Jun 16, 2013
I need a macro to start at cell "A1" on sheet1 and then find that same value on sheet 2 in column B. Once it finds that value in sheet 2, the code would copy the row related to "A1" (A1:H1) into the row on sheet 2 with the value matching "A1" from sheet 1. Once it has done this I need it to do the same from A2:A598. I thought this code below was working but it seems to erase a row from sheet 2 if it is not present in sheet 1. I need the macro to only update the row if the information in column A on both sheets is the same. Here is the code I am using
Code:
Sub FindStr()
Dim rFndCell As Range
Dim strData As String
[Code].....
View 3 Replies
View Related
Feb 7, 2007
I’ve done a search of the forum for a macro and found some post that seems to be about what I want to do, but unfortunately my minimal vb experience prevents me from adapting them to my requirements.
I‘ve got a workbook with three sheets; say Sheet A, Sheet B and Sheet C. I want the info in Sheet C copied to either Sheet A or B depending on the info in cells in Column A of Sheet C.
Sheet C contains customer info, there are about 9 column headings and up to 30 000 rows (Individual customers).
The cells in Column A will contain a number between 0 - 23. What I want the macro to do is, if a cell in Column A contains any of these numbers, 0, 1, 2, 6,7,8,9,10,17,19,20,21,22,23, I want that whole row copied to Sheet A and if it contains 3,4,5,11,12,13,14,15,16,18, I want it copied to Sheet B. The cells will only contain one number, never a combination.
View 3 Replies
View Related
Aug 31, 2012
I want to build a database where the user can select a specific time period. I have a static file with the time periods and the related values. For instance I have in column A1:A15 the time periods from January 2011 to Dezember 2011, but I have some dates multiple times as there are more values attached to it. For instance I have in the first 4 rows January 2011...what I want is when someone puts in the value January 2011 in cell B1 and Dezember 2011 in cell B2 that the whole static file gets copied to another location (including the multiple dates) displaying the chosen time period. Similarly if someone puts in the value March 2011 to November 2011, I want only those values to be copied.
View 4 Replies
View Related
Nov 3, 2011
I have a code that copy and paste a productlist into one sheet.
Is it possible to do this for three sheets all in one operation? I have read about the grouping, but doesn't that affect the whole sheet, so if I write something in one sheets cell, it will be sent to the others at the same time?
Code:
Sub CopyProductlists()
'Set **** = Worksheets("Sheet1")
RAnge("B1").Select
[Code]....
View 3 Replies
View Related
May 26, 2014
Currently I have it setup to copy rows to a sheet "Report" based on a single cell value. But now I need the same thing but have it copy the rows based on 2 cells values to sheet "Report". So for example I wanted to copy and paste each row in my workbook that contain values in Columns N:N that contain the value "Test" and in columns AB:AB that contain "1".
Sub copyagain()
Application.ScreenUpdating = False
Dim sh As Worksheet, findThis As String, fAdr As String, fLoc As Range
findThis = "1"
[Code]....
View 9 Replies
View Related
Jun 28, 2014
I have an excel file with 9 sheets and I want to copy all the data from those sheets to a master sheet but with out the formulas . I need the values only to appear in the master sheet. I used the following vba macro code which I found it while I was searching for an answer, it did it perfectly except for the formula part. !! I guess, it has to be edited by adding some codes with paste options but I don't know how!
Code:
' CollectMasterData Macro
'
Sub CopyToMaster()
Dim wkSht As Worksheet
Dim DestSht As Worksheet
Dim DestRow As Long
Set DestSht = Sheets("MasterData")
[code].....
Note: my headers are @ row 1 and 2 and my formula is in column A.
View 8 Replies
View Related
Feb 2, 2010
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
View 9 Replies
View Related
Mar 31, 2014
I have the following data in one "Project_list" tab:
Project
AAAA
BBBB
CCCC
DDDD
I want to copy this data into another tab "Transpose" in this form:
AAAA
AAAA
AAAA
AAAA
BBBB
BBBB
BBBB
BBBB
[code].....
So basically copying 4 times every row... as simple as that The constraint: I have about 1500+ projects in the project list, but this list can change so i need a statement that copy values 4 times till source tab has empty values. I would like to have in the second column the following serie for each project.
AAAA Q12014
AAAA Q22014
AAAA Q32014
AAAA Q42014
Note- i want to do this in VB not though formulas as i am doing other derivations in macro.
View 4 Replies
View Related
Oct 23, 2007
I need to combine data from 4 tabs with employee names, onto a tab called total. The tab named total is hidden. Is there a way to do this using code?
In my sample I need the name then dates and data below in the yellow areas. As long as Column a has data above cell A22.
View 9 Replies
View Related
Feb 25, 2009
copy range of data from "sheet1" to sheets named A-Z i.e A,B,C,D,E..... in the same location as it was on sheet1 e.g. if on sheet1 data was in B1:C10. i want to copy this onto the sheets named from A to Z in the lacation.
View 9 Replies
View Related
Jul 16, 2014
I need to sum a specific range of values between two headers in several dynamic sheets. The values in the sheets always starts in row 10 and column H (Forcast). For example the header could be "Sales" in column A. Then I want to sum values above the header "Sales" in forcast column H. The next header could be "Operations", where I want to sum the values between "Sales" and "Operations" in column H. Next header could be "Rents" then I want to sum the values between "Operations" and "Rents" in column H, and this is how it continues... Is there any macros for this?
View 2 Replies
View Related
Aug 21, 2009
I have a blank sheet and need to total values in cells to the right of certain information from a range in 90 sheets in other workbooks contained within the same folder.
for example the range is O13:AX500
the first text to search would be "P1", that could be found several times within the range in each workbook with the sheet named "plant"
The value to total would be found in the 2nd cell to its right, ie "P1" in cell O13 then value "£290" in Q13 ::: "P1" in cell X365 then value "£100" in Z365 and so on throughout all 90 workbooks.
The total of the referenced values would then be placed in say B1....
I have around 500 reference codes to total throughout the 90 workbooks so maybe having a list of the text reference down column A may help the process.
Is it possible and can anyone please help with the code to look at a piece of text in new sheet with cell A1 to A500 containing "P1 to P500" and then total all values in the cell 2 to the right in every workbook and place the total in new sheet cell B1 to B500
View 10 Replies
View Related
Sep 13, 2007
I am looking for either formula which will allow me to copy data from a workbook with multiple named sheets into a workbook with a single named sheet. For instance workbook 1 has sheets named bob, sue, and tom and there is a workbook 2 which only has sheet bob. I want to copy the range fo data from sheet bob in workbook1 to workbook 2 as long as workbook 2 has sheet bob.
View 2 Replies
View Related
Oct 4, 2007
I thought I may of been able to get away with just using a simple macro which I could duplicate to copy all the cells in a column between 2 and 251 and
pasting them to another column on another sheet and it only referencing the available text within the first column, but it would appear to be referencing the
blank cells as well, which is creating errors for another function using this column.
So ideally I would like a macro to copy just the text data from a column within the range (F2:F251) on worksheet "Expansion".
All the cells have formulas in them which create a unique text string from other cells on the same sheet.
Not all the cells within the column will be populated with text strings at the same time, but the rows of text will always start at "F2"
and fill down without blank cells between the list of text strings.
The list of text strings will then be copied over to a different worksheet "AG-1" and pasted into column "A" starting at cell "A2".
This function is then repeated 14 more times for (G2:G251) through to (T2:T251) each pasted to different
worksheets "AG-2" through to "AG-15" respectively, in column "A" starting at "A2".
The first column to be found in the process with a blank cell in the starting row of that column, would deem the process complete. Otherwise continue the
process through to column "T".
View 9 Replies
View Related
Jan 8, 2008
I have multiple sheets (lets say for example a 100 of them) where I need to copy a Value from a fixed location (Col#,Row#) from each of the 100 sheets and store it in a column in a Master sheet.. in the end the Master sheet has only two columns.. first column A contains file name (of the sheet where I copied).. then adjacent column B has the copied value.. in other words the Master sheet will have 100 rows and two columns..for this example..
View 2 Replies
View Related
Sep 11, 2013
I have a workbook wherein I have 7 sheets.Lets say they are called Tom, Peter, John, Sia, Mia, Tia and "Home Page". I have 2 buttons for Report 1 and 2 to which I want to assign the macros.I also have a table wherein I have defined which sheets I want to show. First Column of table has sheet names from A2:A6(Home Page,Tom, Peter, John, Sia, Mia, Tia). Column 2 has report 1 sheets - Home Page, Tom, John, Mia and Column 3 has report 2 sheet names- Home Page, Peter, Sia, Tia
What I want to do is, if I click on "Report 1" button, I only want to show sheets whose names are there in cells under report 1 so for report 1 it will be Home Page, Tom, John, Mia. For Report 2, it will be Home Page, Peter, Sia, Tia. Since I have many reports I want this to be one macro. Stepwise, here is what I want
1. Click on button for Report, macro should check which report I am referring to and select the range on basis of that. Report 1 = column B, if Report 2, Range is column C.
2. Basis the range I want sheets to show or hide.
View 1 Replies
View Related
Aug 3, 2012
I have a macro that takes info/data from multiple sheets in the Basin workbook and summarizes it into the Median Database workbook. I need to copy the values in range B5:EM5 in every sheet (each sheet name is site #) in the Basin workbook and paste that range into the median database workbook row with the corresponding site.
Here is what I have so far
VB:
Sub Median_Database()
'This Macro takes the median from each station tab in the current Basin workbook
'And inserts it into the Median Database workbook
[Code]....
how to grab the sheet name and insert it in the median database. The problem is the copy/paste of the range in each sheet. The macro locks up every time.
View 2 Replies
View Related
Dec 14, 2012
Here's what I'm trying to do (improperly apparently!!):
Book1, ''Master'' is the sheet, I'm copying info into, and Company info are the sheets im getting info from each of my .xls files in a folder, ie cell C2. Just in case, to be clear, I have all my vba projects opened from each .xls book, and need to copy, from each .xls book, in Company info, cell C2 into Master column A:
Sub collate_cell_data()
Dim dest As Range, wbNew As Workbook, wb
Set wbNew = Workbooks.Add
[Code] .........
View 1 Replies
View Related
Mar 20, 2007
first time posting. Need some help. I have a workbook with two sheets - (say sheet A and sheet B) that I need to copy a range from and paste (concatonated) into a new workbook. The thing is I want to copy the "non-empty" cells in columns d and e of each sheet - another words - I dont want to specify a specific cell range because users will be periodically adding new rows. Then I want to paste the "combined" from both sheets into a new sheet in a new workbook.
View 9 Replies
View Related
