Select Range To Copy, Find Values And Copy

Feb 2, 2010

I have a base document that i can import another data document with a button (this is working).

I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).

I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.

Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.

If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .

I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.

View 9 Replies


ADVERTISEMENT

Find Date Chosen From Calendar & Copy Range And Paste As Values

May 23, 2009

I've attached a workbook which contains two sheets:
PAYM
DEVICE_PAYM

Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.

View 2 Replies View Related

Find Values, Copy, Check Date & Copy

Aug 6, 2007

The following macro does what it is designed to do and needs to be run from a control sheet called "Guide". When I run it from this Guide sheet it stops at around row 53 (out of 1400 rows) on each of the specified sheets in the macro. I have struggled with this problem and have now discovered that the macro will run correctly when run from one of the worksheets specified in the array, e.g. sheet "200 and 100".

Sub Calculateclosingtrades1()
Dim r As Long, c As Integer, LastRow As Long, rcheck As Long
LastRow = Range("J65536").End(xlUp).Row
Dim shtTemp As Worksheet
Dim vntName As Variant

For Each vntName In Array("200 and 100", "100 and 50", "50 and 25", "40 and 20", "20 and 10", "15 and 10", "18 and 9", "200 only", "100 only", "50 only", "40 only", "25 only", "20 only", "15 only").............

View 7 Replies View Related

VBA - Find Select Offset Copy And Paste

Aug 23, 2012

I am trying to achieve something like this :

Find a specific text in my column B (example : "Proposal ID"), when "Proposal ID" is found, select this cell and offset to the column C (Offset(0, 1)). Then copy this cell value in another sheet.

This will be repeated with different texts (always in the column B), so if the text is not found, I need the macro to continue running.

View 5 Replies View Related

Select Range & Copy

Oct 31, 2007

I have a macro to search column E for an occurance of the text ALPHA,(there is more than one occurance of the text, so I'm using a loop to search for the next occurance,once the first one is found. No problems there).

Once I find a Row that contains ALPHA( say Row 15), I want to Copy the columns A15:R15 (NOT the EntireRow).

how I can Copy only a Range of Cells and not the EntireRow?

View 9 Replies View Related

Select And Copy By Date Range?

Jul 21, 2014

I am attempting to select a row if the date field value is within a date range.

I would like to be able to click a button, have a pop-up, be asked to insert a start date and an end date. For example 2014-07-01 and 2014-07-21 I would then like the macro to copy rows if the date value is within that range to the next available row onto a new worksheet.

View 1 Replies View Related

Copy Range When I Select A Value In A Combobox

Mar 2, 2009

First I will explain what this workbook does.
In worksheet "sheet1" I use "change sheet" button to change the backgroud by selecting some pictures, in range S14 I have one number from the name of the background picture (using substiture function).
By selecting one cell (with blue text) + one value from the combobox, in worksheet "sheet2" : -the selected value in column A will be deleted
- the selected value in column B will be added
- in column C I will see the adress of the active cell (cell with blue text)
- in column D I will see the blue text from the active cell

I need in column E to copy the range S14 from "sheet1" when I select a value in the combobox !
The range S14 will have different values!
I had tried this code (in module1 "Sub test") but it's not working how I need it to work:

View 14 Replies View Related

Range Select Then Count Down 10 Cells Below And Copy

Jan 13, 2009

I am having a problem putting a range select statement in my macro. Here is what I'm trying to do. I want to select E1, then count down 10 cells below and copy. My sheet is filtered, so those rows are not continues. When I do the record a macro it highlights the rows and it looks like this (e10:e506, but it's only 10 items). I only want it to count down 10 cells and copy. Is there a statement for this.

View 3 Replies View Related

Select And Copy Range From Active Cell

Oct 21, 2009

I want my code to evaluate each cell in column B, and based on its value, copy the row from D to X and paste on the newly activated worksheet. I'm trying to use Offset, but it's not working.

View 6 Replies View Related

VBA - Select And Copy Range Down After Specific Value Found

Nov 28, 2012

I have been trying to write VBA which basicly search for specific value in column A and copy values from that cell to down and two columns next. Select row and columns down after specific value in column A was find.

Like this
A B C
... ... ...

X 100 115
... ... ...
up to last row

I try with VBA below but it do not works.

Sub Select_Rows_GK()
Dim LR As Long, i As Long
LR = Range("A" & Rows.Count).End(xlUp).Row
For i = 1 To LR
If Range("A" & i).Value = "9000" Then
Range("A" & Rows.Count).Offset(0, 1).Select
Do While Not IsEmpty(ActiveCell)
ActiveCell.Offset(0, 1).Select
Loop
Exit For
End If
Next i
End Sub

View 3 Replies View Related

VBA Select Range To Copy Based On Two Variables

Jan 13, 2014

I have a Macro that already works great but now I need to look for another variable to sort it down even further. I think it can be done by setting up a "Case" but still not sure how to do that. It already looks through the range to find all the rows that return a value of "True". Now I need it sort those results so it only returns what has a specified value in Column "AJ". I am looking to do several choices (Listed Here). So the end result will be all the items that return "TRUE" In Column "AI" and are Items that return one of these values per Case "Starters, Appetizers, Soup, Salad, Entree, Dessert, Special" with then copy over in the exact format that is listed in the code below.

For example All the items that are selected with "TRUE" can be narrowed down to all of those that are "Salad" as well - Then copied over in the exact format that is listed in the code below.

What I am doing is breaking out all the different course of food and putting a Header in-between each (That is already built and working) - So I can select all the food from a master list and then put it in order on the "Catering BEO" Sheet with Headers in between

Code:
Sub BEOA4()
Application.ScreenUpdating = False
Dim wsSource As Worksheet
Dim wsDest As Worksheet
Dim FoundX As Range
Dim FirstFound As String
Dim lastrow As Long

[code]....

View 3 Replies View Related

Allow User To Select Range To Copy Macro Code

Apr 30, 2008

I cant seem to get to work together in the same macro but that work great seperated. I need them to be in the same macro. The first just simply copy's text from one workbook to another:

Sub Test2()
ActiveSheet. Range("a1").Copy _
Destination:=Workbooks("punchlist.xls"). Sheets("Sheet1").Cells(Rows.Count,1).End(xlup).Offset(1,0)
End Sub

That worked ok but I needed to change it to the "active cell" instead of cell "a1". So then this line of code was made:

Dim userInputCell As Range

On Error Resume Next
Set userInputCell = Application.InputBox("Use the mouse to select a cell on any sheet", type:=8)
On Error Goto 0
If userInputCell Is Nothing Then
MsgBox "Cancel pressed"
Else
Msgbox "You selected " & userInputCell.Address(,,,True)
End If

The second code works just the way I want it but it doesnt copy over the text to the other workbook. I assume the 2 codes need to be together but I cant get it to work without errors. I also need the text to copy over without changing the borders on either workbook.

View 3 Replies View Related

Select And Copy Set Of Data In Column Based On Starting And Ending Values

Aug 26, 2013

I have a macro that copies three sections of data from a word document and pastes it within the Excel worksheet. The column of data is pasted in a single column (data to be space-delimited and evaluated later), and what I would like the MACRO to do is separate the three sections of data based on the starting and ending values of the section and place them in different columns.

Section 1 : starts with the word "Team"
Section 1 : ends with the word "City"

Section 2 : starts with the word "Location"
Section 2 : ends with the word " Date"

Section 3 : starts with the word "Member"
Section 3: ends with the word "Age"

So section 1 would be pasted into cell C1, section 2 pasted into G1 and section 3 pasted into J1.

Each section will have vary in number of rows between the starting/ending values, so to cut and paste the section based on the starting and ending value is vital.

View 7 Replies View Related

Find Matched Value In A Range For Named Cell Then Copy Range Cells Below

Aug 6, 2013

I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.

The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.

View 9 Replies View Related

Find Specified Values. Offset & Cut/Copy

Aug 2, 2006

I am trying to locate specific values in column a of a spreadsheet and I want to be able to move (cut and paste, offset, ???) only those values to column c of the same row. The values I am looking for are text and they all begin <@29>, <@33>, etc. (pagemaker codes). I want to move the cells with the pagemaker codes to column c. and leave the other ones in column a. Does anybody know how to do this using vba? Below is a sample of my column a.

16D
16D
16D
16D
16D
16D
16D
16D
16D
16D.........

View 3 Replies View Related

Find And Copy Values To New Workbook

Aug 10, 2006

Here's what I need to do. I need to search 3 huge columns from multiple workbooks and copy all values > 0 onto 1 Worksheet in a completely new workbook.

I've done a search and this was the closest I've found to what I need: Find, copy, paste to diffrent sheet

But I couldn't get it to work.

Here's where I am:

For iteration = 1 To numFiles
'blah blah blah get filenames
'filename of new workbook = outputFileName
'worksheet name in new workbook = Cumulative Record Data
'filename of data workbook = dataFileName
'worksheet name in data workbook = Record

The error code I get is Run-time error '1004' - Application defined or object-defined error on line

View 9 Replies View Related

Find Value And Copy Related Values

May 21, 2008

I am building a Macro which can be found underneath. The red code is not working right now and I am looking for alternatives to solve this error but until now I haven't found none.

Basically, I am looking for a correct code to copy files from a sheet to another sheet with a find macro.

Sub vinden()
Dim FindString As String
Dim Rng As Range
FindString = Range("A21")
If Trim(FindString) <> "" Then
With Sheets("Voorraadverloop").Range("A1:IV65536")

View 9 Replies View Related

Copy/paste Values (copy Values Of Cells From B4 Till B-empty To C Column)

Jun 26, 2009

Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.

View 3 Replies View Related

Find Range & Copy ...

Jan 5, 2007

Another question where i think my logic is ok i'm just not sure on the syntax.

I'm trying to find a range of cells by a criteria and the copy that range to another part of the sheet, The finding the data is ok i think, its just the copying... SpecialCells

Private Sub GetMainClass()

Dim Class As Range
Dim Cell As Range
Dim Destination As Range
Dim Counter As Integer

'searches entire sheet
Set Class = Selection.SpecialCells(xlConstants, xlTextValues)

' Initial setting of the counter. first row for data is the integer
Counter = 20

'set up the destination range with a counter to increment the row so data doesn't overwrite
Set Destination = Range(Cells(B, Counter), Cells(I, Counter))
For Each Cell In Class
If Cell.Value = "Main" Then
Cell.EntireRow.Copy Destination
Counter = Counter + 1
End If
Next Cell
Application.CutCopyMode = False

End Sub

View 5 Replies View Related

Macro To Find Text And Copy Row Values

Jul 11, 2014

See attached spreadsheet for reference : MacroHelp.xlsx‎

I would like the macro to look in column I, and when it finds "TRUE", I'd like it to copy and paste values in all the cells to the left of it.

Reason being is that I want to rid the row of its formula, so the next time someone changes the info (the date the vlookup is searching for) in the tabs those cells are referring to, I will not lose the data it returned previously.

Really all I want is to copy and paste the values in the lowermost row of new information for each plant, but this is the best way I can currently think of.

I've removed the tabs the cells in columns B-G are referring to for sensitivity's sake.

View 2 Replies View Related

Find Values From Column In Another & Copy All Occurrences

Aug 16, 2007

I have created (pieced) together a macro to search through a list and paste the results in another worksheet it works fine but i can't get it to loop through the list.

Sub Findall()
Dim y As Long
Dim starta As String
Dim tr As Long, tc As Long
Dim sr As Long, sc As Long
Dim s As Worksheet, t As Worksheet
Dim SourceCell As Range
'Setup
Application. ScreenUpdating = False
Set t = Sheets("Target Sheet")
Set s = Sheets("Search sheet")
Set SourceCell = ActiveCell
Do While IsEmpty(ActiveCell) = False
Counter = 1
'Get last used row in Target Sheet
t.Select..........................

View 6 Replies View Related

Find All Occurrences In Range And Copy

Feb 25, 2014

I'm using a macro for searching through ~200k rows of a column, finding all the occurrences of a string and copying them to another column.

This is the code (copied from somewhere some time ago, modified as needed) :

[Code] .....

It works great but it takes a little less than 20 seconds to complete the task.

And, since I have to search for multiple strings and the results need to be copied to different rows, I use multiple subs like this in a bigger macro.

The problem is that it got to the point where it takes 3 minutes to execute that bigger macro and I'm trying to find a way to speed things up.

View 5 Replies View Related

VBA To Find Last Row Of Data And Copy Range

Mar 20, 2013

What would the VBA code be to find the last row of data and have it copy range A2:E(last row)?

View 2 Replies View Related

Find Range With Value X And Copy To A Cell

Feb 13, 2007

I have small problem to solve and I can't find out how: I have to find cells in a range (L4:L20) with value PM and copy range with two next cells to cell F4 (not a cell with "PM") If in range("L4:L20") cells = PM then copy range with next 2 cells to ("F4"). See attached worksheet.

View 3 Replies View Related

VBA - Copy Range With Multiple Same Values Based On Other Cell Values

Aug 31, 2012

I want to build a database where the user can select a specific time period. I have a static file with the time periods and the related values. For instance I have in column A1:A15 the time periods from January 2011 to Dezember 2011, but I have some dates multiple times as there are more values attached to it. For instance I have in the first 4 rows January 2011...what I want is when someone puts in the value January 2011 in cell B1 and Dezember 2011 in cell B2 that the whole static file gets copied to another location (including the multiple dates) displaying the chosen time period. Similarly if someone puts in the value March 2011 to November 2011, I want only those values to be copied.

View 4 Replies View Related

Find Certain Values Then Copy Part Of Line To Another Sheet?

Aug 6, 2012

I tried to make something to find a certain value (from a userform) in a range, and then copy the line partially to another sheet. Then go forth to the next found item and do the same. But... I cannot seem to make this loop.

With Sheets("Data input").Range("N5:N1100")
Dim FoundRange As Range
Worksheets("Data input").Activate

[Code].....

View 5 Replies View Related

Find And Copy 10 Values - Paste To Various Cells On Second Sheet?

Jan 7, 2013

Purpose:
Build a roster from:
Sheets(Settings).Range("A21").Value (this value is variable)

Problem:
Find that A21 value in Range T2:T100 (each value in the range is unique)
Copy that value to Sheets("Roster") E8
and the next 9 values to
E14
E20
E26
E32
G2
G14
G20
G26
G32

Reason for posting: I've been trying to do this with vba but sheet formula will probably work, I can always Copy/Paste Special/Values to clear the formula. Keyword searching has resulted in no progress.

View 2 Replies View Related

Find All Occurrence Of Word & Copy Offset Values

Oct 31, 2009

I am writing a program which would look for look for the word " TOTAL" in sheet1 and then assign several values in sheet 2 based on cells offset of address of "TOTAL". This is repeated and down rows of sheet 2. Everything works except that it is giving repeating the first "TOTAL" address; i.e. it doesn't seem to go to the next met criterion.

Sheets("Summary").Range("A1").FormulaR1C1 = "=COUNTIF(Sheet1!C,""TOTAL"")" ....

View 7 Replies View Related

Find Values & Copy All Occurences To Relative Worksheet

Dec 3, 2007

how to write a vb code to do the following actions with an excel sheet, which contains a dump from SAP. This dump usually consists of anywhere between 25 to 30 columns and about 20000 to 30000 rows

1. Find all rows which contain VN and place it into the sheet Vendor Charges (which already exists). Which could be in any column

2.Find all rows which contain MT and place it into the sheet Material Charges (which already exists).

I have attached the excel sheet to better explain what I had in mind. sheet1 contains the raw data from SAP but, the number of columns varies every time so it cannot be directly sorted by selecting the column. I tried recording a macro but, as I dont have a constant sheet to work with each time the macro obviously doesnt work.

View 4 Replies View Related

Find Column Values Between 2 Files & Copy Paste Into Another

Jul 31, 2008

1. For a file moving from one cell to the next, down the column, get the values and seach for the values in file number two.

2. If that value is found, copy a cell from file 1 to a cell of a column on the same row where the value was found on.

3. Do what was done on number two, but with a different column.

this is what i have so far...

Sub replace()
'
' Macro2 created by david
'

' for the entire sheet, moving from one cell to the next down the column, changing rows
' search for the contents in another sheet, and then if that is found,
' copy the row number to a variable, and then
' copy column K from sheet 1 to column N of sheet 2, using the same variable above
' after that same, but L goes to P.
'
'
Windows("file1.xls").Activate
Rng = Selection.Rows.Count
Dim toFind As String
ActiveCell.Offset(0, 0).Select
Application. ScreenUpdating = False
Dim i As Integer
For i = 1 To Rng
Windows("file1.xls").Activate
toFind = Range("A + i")
Windows("file2.xls").Activate

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved