Match Values Between 2 Sheets, Copy All Corresponding Data & Sum Results
Feb 2, 2009
I want to locate the corresponding acct number between worksheets “primary_data” and “qty_movement” and once a match is found (from acct worksheet) then copy over the acct numbers and the share data to the results page. If there is no match I don’t want anything copied to the results page, just ignore that data on either worksheet “primary_data” or “qty_movement”.
•Both ranges on “primary_data” and “qty_movement” worksheet are variable, as accts are left off or kept on depending on the daily activity so the ranges are never set.
•I need to concatenate on “primary_data” worksheet cells A&B&C to get acct number
•concatenate on “qty_movment” worksheet cells B&C (need to keep zeros in front of actual numbers for acct number reasons)
•these accts need to be cross referenced as the accounts on the “acct” worksheet (pre-populated with corresponding acct numbers that never change and will always be on that worksheet)
•If a match is found on the “acct” sheet then I would like it to either replace the acct so they match on both worksheets or just to recognize those accounts correspond with each other and do the below.
•then take the 2 concatenated acct numbers off of “primary_data” and “qty_movement” in the I cells and copy them over to the “results” worksheet as well as the share data from “primary_data (column E)” and “qty_movement(Column D)” and then compare the 2 share amounts on “results(column E)”
i need to elaborate on anything, the attached sample sheet shows what i want to do, but without any formulas or code.
View 5 Replies
ADVERTISEMENT
Dec 18, 2012
I have a sheet (SHEET1) with a EAN code and a empty column I need to get a colour into from sheet 2.
I have to match EAN codes in Sheet 1, (Column X) with Sheet 2(Column E) and then pull the description from the corresponding row in Sheet 2(Column D).
I am sure I can use the VLOOKUP formular but I dont know how to input the code?
=VLOOKUP(lookup_value,table_array,col_index_num,range_lookup)
View 2 Replies
View Related
May 13, 2009
I have a worksheet named "List" with static values in columns A & B. I want to search all the other worksheets in the same workbook for the one that matches the value I entered in column B on the "List" sheet. The cell on the other worksheets with the possible match is B5. When it finds a match, I want it to take the data from cell B3 on that worksheet and paste it in Column C of the "List" sheet on the corresponding row (all rows in the "List" sheet have a different value in Column B).
In other words, when "List"b7 = worksheetb5 , then worksheetb3 is pasted to Listc7.
View 13 Replies
View Related
Feb 13, 2014
I have 2 worksheets, A and B. In both worksheets there is common data in column A (account ID). I would like to find a way to return all of the data for the matching row in worksheet B and have it pasted into the matching row in worksheet A.
So in the example below, I am looking for a function that will match on Account ID in both worksheets and then paste the results from Dataset 1, 2 and 3 into the row with the matching Account ID in worksheet A.
Worksheet A
Account ID
Column to paste matching rows from Worksheet B
1
2
Worksheet B
Account ID
Dataset 1
Dataset 2
Dataset 3
1
AAA
BB
CC
4
EE
DD
FF
View 1 Replies
View Related
Jun 16, 2013
I need a macro to start at cell "A1" on sheet1 and then find that same value on sheet 2 in column B. Once it finds that value in sheet 2, the code would copy the row related to "A1" (A1:H1) into the row on sheet 2 with the value matching "A1" from sheet 1. Once it has done this I need it to do the same from A2:A598. I thought this code below was working but it seems to erase a row from sheet 2 if it is not present in sheet 1. I need the macro to only update the row if the information in column A on both sheets is the same. Here is the code I am using
Code:
Sub FindStr()
Dim rFndCell As Range
Dim strData As String
[Code].....
View 3 Replies
View Related
Nov 22, 2006
I'm sure this has been answered before. After an hour of searching I realized I just don't have the vocabulary to find it.
Here we go:
I have two sheets, sheetA and sheetB.
sheetA contains parent names (first and last), addresses, equipment, and serial numbers
sheetB contains parent names (first and last), addresses, and their child's name.
I need to match the parent from SheetA to the parent in SheetB and then copy the child's name from sheetB back to the correct record in SheetA.
View 8 Replies
View Related
Feb 26, 2012
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
View 2 Replies
View Related
Mar 9, 2012
Been a while since I've worked with macros within excel and I can't seem to get what I remember being a basic macro to work whatsoever. I have 2 worksheets containing a massive amount of data and need to pull some cells from one into the other when values in 2 columns match.
To better explain, sheet1 has ID numbers in column G spanning for roughly 1700 rows. Sheet 2 has corresponding ID numbers in column EO. The data I need to copy over is in columns EP and EQ on sheet 2.
So I'm trying to build a macro to compare the values in Sheet1_Column_G to those on Sheet2_Column_EO and when a match is found, copy the value in EO and the adjacent entries in columns EP & EQ over into columns X, Y, and Z on sheet 1.
Couldn't get a VB function together to save my life so I tried working with MATCH & INDEX and didn't get very far either. I've included my current function below.
=IF(ISNUMBER(MATCH(G1606,Data!$EO$527:$EO$601,0)),INDEX(Data!$EO$527:$EQ$601,MATCH(G1606,Data!$EO$527:$EO$601,0)),"Not Found")
View 7 Replies
View Related
Apr 14, 2008
I've come across the post by Dangelor but can't reply to it directly so have started a new thread quoting the code. I'm trying to select entire rows of data based on specific values in a column and then paste those rows to a new worksheet.
This code loops 10 times and creates 10 new sheets. Any chance someone could explain some of the code to me and adapt it to suit my situation?: Data will be in sheet 1 ("Data List"). I want search down the rows and if the value in column 2 is "1" copy that row to the sheet named "Heat 1", if the value is "2" then copy that row intt the sheet "Heat 2", etc.
Sub FindandCopyRows()
Dim Data As Variant
Dim DataFound() As Variant
Dim iValue As Integer
Dim j As Long
Dim i As Integer
Application. ScreenUpdating = False
For iValue = 1 To 10
With Worksheets("Main") 'change name as needed
.Select
Data = .UsedRange.Value
End With
Redim DataFound(1 To UBound(Data))
For j = 1 To UBound(Data, 1)
On Error Resume Next......................
View 2 Replies
View Related
Jun 13, 2014
I have a workbook with 50+ sheets. Within each sheet are rows of data in column A that I'd like to search for specific text.
I'd like to search each row from every sheet for specific words (e.g. "7 days" AND "Monday" AND "Tuesday" etc.) then copy the entire row containing all my search text in a new sheet on column A along with the name of the sheet it was found in in column B and the row number it came from in column C.
What I am trying to accomplish is to search through all the sheets and post results in new sheets for each search string.
View 14 Replies
View Related
Nov 30, 2009
The data to be filtered is in several sheets, and once filtered is to be copied to a destination sheet (in this case "Temp"). The criteria for advanced filter is on an altogether different sheet (in this case "Reports"). The macro is actually simplified for the purpose of the question, and I want to re-use the code several times, hence the use of variable "filterRng". When I run it, I get the subject error at the bolded line in the code below. I'm thinking that the Advanced Filter doesn't like a variable as a range reference, as it runs perfectly well if the commented out line below the problem line is used instead.
Sub Test()
Dim i As Integer
Dim rngData As Range
Dim filterRng As Range
Set filterRng = Sheets("Reports").Range("A121:K124")
Application. ScreenUpdating = False
Application.DisplayAlerts = False
View 4 Replies
View Related
Jan 24, 2014
I am trying to come up with the most efficient way to copy data to multiple sheets within the same Excel workbook. The original data exists within one column on a summary sheet (could have up to 500 individual entries). I want to copy each individual entry to a unique sheet (that already exists), but in the exact same cell location within each sheet. I would only want to copy the original data value and not any formatting. Is there an efficient way to do this?
In my example spreadsheet, the original data is on the SUMMARY sheet. Sheets A through J would be the target sheets, with cell B2 as the target location for each of those sheets. My example shows the result of a manual copy paste value process, but I am hoping to automate that.
View 14 Replies
View Related
Mar 25, 2014
Currently i am using index and match in excel but however i am unable to get the result tt I want.. what i need is
Data to check with item master whether all 3 (article, color code and size) matches and if it doesn't match, which of the field is wrong. (eg: wrong color code, wrong size or article don't exist).
[Code] .......
Above is my item master
Data to check
[Code] ........
Example case: 1
Checking first row of data check
Article number: 2-50660147
Color code: 6
Size: M
Result: "Wrong size"
But however, it returns as wrong size as it only reads the first time the article number appear in the item master and does not recognize the second time the article number appears with the correct color and size.
View 9 Replies
View Related
May 7, 2014
I have two sheets. Sheet A (Receiving Log) contains all orders with NAME (D1) and QTY ORDERED(E1). Sheet B(Component Reject Tag) contains all rejects with NAME(D1) and QTY REJECT(E1). Sheet A and B are Many to Many relationship
What I am trying to figure out is:
Match the names from Sheet B to Sheet A and sum up the QTY REJECT from Sheet B divide by the sum of QTY ORDERED for the NAME from Sheet A.
Business would like to get QTY Reject percentage by each NAME (Supplier)
In a final table lets say Sheet C I would like to see NAME, QTY Ordered, QTY Reject, Ratio in which will allow my to perform a Top 10 suppliers of highest reject percentage.
Another note to mention, Sheet C presumably to have all the formulas as in Sheet A and B will be overwritten and pasted with new data.
View 10 Replies
View Related
May 23, 2014
I have Information found on Sheet 1. I need the program to take the value found in Column B and try to find matches found on Sheet 2 in Column B. Here's the thing it is only going to take the first 3 characters found in the Cell on Sheet 1. But in sheet 2 it will need to pull all information that matches those 3 characters. I included a sheet on what the finished product should look like for two of the sheets. If the program finds a match it will transfer the original and the copied match to a sheet Named "Name". The correct format can be found on "Finished Sheet Name". If no matches are found it will place the original information from Sheet 1 onto a sheet called "New".
Test2.xlsm
View 5 Replies
View Related
May 4, 2007
find attached sheet of example.
In the attachment the supplier sheet is the sheet we get from our suppliers and it shows us the products they have in stock along with the prices and other information. This sheet has over 900 products on it. It is updated daily which we download and then paste it over the existing data.
The Deviltronics sheet is the products we have added onto our website. It has a code in column E which tells us if the products on the supplier sheet is in stock or out of stock. (this was done by the help of someone here)
Both sheets have been cut down considerably so that we can add them as an attachment on here.
So now I am going to tell you what I am trying to do!
What we need is a code that will automatically copy the trade price, suggested retail price and the shipping cost from the supplier sheet and insert it into the Deviltronics sheet next to the relevant product (say in columns F, G and H). This done by matching the product code part numbers in both sheets as done with the existing code on the Deviltronics sheet (column E).
View 4 Replies
View Related
Jan 20, 2009
I would like to match column data in a source spreadsheet to column data in a target sheet. If a match is found, I would like to copy the corresponding row range from the source sheet to a separate, third sheet. For values where no match in found in the a target sheet, I would color the unmatched cell in the target sheet red. If a match was found, the cells would be colored green. The data in the Source sheet is in column A, while the Data in the Target sheet is in Column T. The data will be pased in the third sheet in Column T preserving original formats
I have this code, gleaned from several postings on this forum that somewhat works. The problem is that I get false mismatches (i.e. some cells get colored red even when there is a match and the data got copied to the third sheet) even though there are no duplicates. I have made sure that the formats are identical in both Target and Source sheets to try to fix this. Also, I don't want to cut the entire row , but just copy and paste a row range onto a third sheet. The column and row ranges are variable. I am attaching a file.!!
Sub CutRows()
Dim i As Long, k As Long, n As Variant, r As Range
Application. ScreenUpdating = False
With Sheets("Source")
Set r = Range(.Cells(1, 9), .Cells(65536, 6).End(xlUp))
End With
k = 0
i = 6
While Not IsEmpty(Sheets("Target").Cells(i, 20))
n = Application.Match(Sheets("Target").Cells(i, 20).Value, r, 0)
If IsNumeric(n) Then
Sheets("Target").Cells(i, 20).Interior.ColorIndex = 35
k = k + 1
Sheets("Source").Rows(n).Cut Sheets("Sheet3").Rows(k)
Else
Sheets("Target").Cells(i, 20).Interior.ColorIndex = 3
End If
i = i + 1
Wend
Application.CutCopyMode = False
Application.ScreenUpdating = True
End Sub
View 7 Replies
View Related
Apr 12, 2007
I just need to copy the values
Dim LastRow As Long
If WorksheetFunction. CountA( Cells) > 0 Then
'Search for any entry, by searching backwards by Rows.
LastRow = Cells.Find(What:="*", After:=[A1], _
SearchOrder:=xlByRows, _
SearchDirection:=xlPrevious).Row
MsgBox LastRow
End If
' copies SUSD_DATA to SUSD Database
Range("SUSD_DATA").Copy Sheets("SUSD Database").Range("b" & LastRow + 1)
' copies SUSD_DATA to SUSD Database
Range("Defects").Copy Sheets("Defects Database").Range("b" & LastRow + 1)
View 3 Replies
View Related
Apr 22, 2008
I am trying to drop (paste) in new data in a range in sheet 2 and cross reference a column with a table in sheet three and display all rows of matching instances in sheet 1. Example:
Sheet 3 has
a1 b1
amcdap amber connor
apsdap ashley simpson
sheet 2 has
a1 b1 c1 d1 e1
amcdap 300 400 2:00 9:00
apsdap 500 300 4:00 8:00
capdap 200 300 5:00 9:00
dlsdap 400 300 2:00 8:00
I need to return only rows 1 and 2 to sheet 1. I guess ideally I'd like to drop data in sheet 2, click button.
View 5 Replies
View Related
Aug 29, 2008
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
View 7 Replies
View Related
May 21, 2011
I am receiving a data from two different sources having multiple information. I want to match the data for any missing entries from one sheet . There is a common column Field N which contains the reference number of the transaction, based on this reference number i require to match these entries. e.g: Sheet A contains serial Number, name, ID Number (not common in both sheets) , amount , name and of course [B]Reference[ Number ( which is common in both the sheets.
.
I would like to match these two sheets on the basis of this reference number and if there is a MISMATCH of ( Reference number is NOT present in sheet 2 than this information should be COPIED in a SEPARATE work sheet. I tried different VLOOKUP functions BUT am still unsuccessful.
View 14 Replies
View Related
Oct 4, 2013
I have the following columns
Client Name/ Client Date of Birth/ Client Postcode
I have the same on sheet 2 in the same order i want something to look down the relevant sheets and give me matches either by highlighting it or moving the matching row to a new sheet ...
View 3 Replies
View Related
Jul 29, 2013
I've created a spread sheet of hockey stats to prepare for my fantasy league. I've created a formula weighing different stats differently to create one "Fantasy Value" score. I've done it over 3 years of data and want to find the average 3 year score for each player on the front page of the workbook. There are 300+ names I'm tracking so I'm wondering if there is a way that Excel can recognize a player's name and pull the data from one specific column in 3 different sheets.
I've attached the excel file for your reference : NHL Stats.xlsx‎
View 4 Replies
View Related
Jun 9, 2014
In the attached sheet, i have data in 2 sheets in the same fromat. Both the sheets are seperate reports.
Coloumn A is the list of Team Ids, Coloumn B is the Ids of people who are assigned in the team. Sheet 2 also have the same details with changes in the people ID.
i am trying to find if the people IDs in report 1 is the same in report 2. i need a formula that will check if the people ID is matching to the same team ID as in report 1.. If its not the same, the formula should be able to show that.
eg :
In report 1, "197595" in coloumn B is against "4011-11341" in Coloumn A.
I need to check if "197595" is against "4011-11341" or some other number in report 2. If "197595" is not against "4011-11341" in report 2, it should show me " Miss match". if "197595" is is against "4011-11341" in report 2 as well, it should show me "match"Project match.xlsx
View 3 Replies
View Related
Nov 13, 2012
I wanted to extract the data from the sheets if it match condition.
In the sheet george, data is in the A9: AE500. in the B9:B500, there is date format (mm-yy).
In the H9:AD500, designed as checklist where update as "Y" if or nothing
I wanted to extract the data from this file to sheet Exctract if any of the cell in the H9:H500 not equal to "Y" and B9:B500 of sheet george is less than or equal to D2 of sheet Extract. in the sheet George, some row will be hidden, i wanted to bring the data from hidden rows also.
View 4 Replies
View Related
Mar 24, 2008
I have another little VBA macro problem that appears to be beyond my coding knowledge.
I have attached a small excel spreadsheet, with a macro recorded (CTRL-P) of what I'm trying to accomplish. Basically, If the data in column A matches a single entry in column F, I need to copy and insert the row (columns F-L) that matches.
View 4 Replies
View Related
Sep 1, 2006
Does anyone know of a line of VBA code that selects all sheets in the workbook (including hidden sheets)?
View 9 Replies
View Related
Mar 7, 2014
I've created 12 identical work sheets for the year, each has 6 columns of data and 87 rows all containing different information (letters, numbers, dates and characters).
I've also set up a "Conditional Format" rule so that any identical information triggers a strikeout (line through the cell entries) of the entire row for both lines of offending duplicating data. To do so, I created a use cell off to the side (in column AT) with the command =CONCATENATE (u41,v41,w41...) which condenses all data into 1 cell.
Afterwards, I went into Conditional Formatting and created the strikeout command with =COUNTIF($A$T$29:$A$T$116,$AT29)>1; where the $AT29 reference simply identifies the cell to the left and then continues down.
This has worked well but I'm stumped. Now I want the reference to extend to the previous month, lets say I'm in February and want to extend the search to Januarys AT29:AT116 review.
simply use a reference in the COUNTIF formula in the Conditional Formatting rule that takes the search through to the January work sheet, then I can simply duplicate the command for the March sheet which will then review all 3.
View 1 Replies
View Related
Jun 5, 2014
I have set of user-form contains with Combox & 2 textbox and to generate report one cmd button
I have 3 different sheet contains report of daily activities ( Dispatch,Closed,Cancel)
If Dispatchcalls Select In Combobox1 ,Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from dispatchcalls Then Save Data Into Excel File As "Dispatchcalls".
If Closedcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Closedcalls Save Data Into Excel File As "Closedcalls".
If Cancelcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Cancelcalls Save Data Into Excel File As "Cancelcalls".
"C:UsersmaniDesktopNew folderLenvo_ReportsONSITE CasesVlokupuf" This is path i stored existing 3 file dispath,closed,cancel
View 3 Replies
View Related
Apr 11, 2014
I am trying find a match from multple "text" values.
The values I'm using are flight numbers from sheet "Indiv case" in column (range H2:H51). The flight number could occur multiple time in the column.
The associated flight number sheet "Code & categories" in column (range H2:H257) are associated with the last port of embarkation (range I2:I257) in "Code & categories" sheet.
I need to copy & past the name of the Last port of embarkation from sheet "Code & categories" into sheet "Indiv case" adjcent to the flight numbers in column (I2:I51).
Example: Sheet "Indiv case" from Column (H2:H51) Fligh number Data: UA863, VA4148, EK432, BA15, BA15, VA98, QF8, AC33 etc Using these value from "Indiv case" from Column (H2:H51) search and match valuse in "Code & categories" in column (range H2:H257)
If match found copy valuse from sheet "Code & categories in column (i2:I257) in to sheet "Indiv case" into column (I2:I51) Last port of embarkation".
H2;H257, I2:I257
Flight, Last Post
3k111, Singapore
3k131, Singapore
AC33, Vancouver
Copy and Past "Last Port" into sheet "Indiv case (I2:I51) adjcent to matching flight code.
View 1 Replies
View Related
