Copy And Paste Selected Range Into Another Workbook Based On Headings And Next Empty Blank Row
May 14, 2014
I have a worksheet with some info that is filled in from other employees. I have Customer Name, Date of Oldest Invoice, Avg. Days Beyond terms in column N42:N44, with the data in column M42:44. I want to copy and paste that into another workbook, I need to transpose the data and then paste it into the next blank row. IF POSSIBLE, I would like to have some of the column headings the same as the above fields, and I would like to paste the data into the correct column heading.
Currently I have the code listed below. It copies the data, opens the spreadsheet, (this is where it fails) find the next blank row and transpose and paste the data. It does transpose and paste the data but it does not look for the next blank row, instead it just transposes and pastes the data in the last cell that was active when the work book was closed.
Code:
Private Sub CommandButton1_Click()' Paste Macro
' Macro recorded 5/14/14
'
'
Range("O42:O47").Select
Selection.Copy
Workbooks.Open Filename:="L:Financial Services! FRA !! Preston !3rd Party Collections Accounts 2014.xls"
[Code] ..........
View 8 Replies
ADVERTISEMENT
May 30, 2014
Im looking for a macro that can get a cell RANGE, the data in the RANGE will be copied then if the checkbox is selected it will copy the same data in the RANGE and add the selected checkbox in next column
I have column A and Column B < this is my selected range
Capture1.PNG
I will have a form that has checkbox and buton.
When all the checkbox is selected. when the button is click. the result will be.
View 1 Replies
View Related
Mar 30, 2009
I have a code that will allow me to copy three worksheets from an open workbook to a new workbook. That works great, but I only need only a selected range from each of these worksheets to be copied (Range A1:AV60). Here is the code I use to select and copy the worksheets, how do I add a range within this code for each worksheet.
Sheets(Array("Req Page 1", "Req Ext 1", "Req Ext 2")).Copy
View 9 Replies
View Related
Sep 13, 2007
I am trying to create a method to select the values of contiguous range selections on excel worksheets.
Users will be making new worksheets in new workbooks out of the data from the old sheets.
Currently users make a selection is and copy it to a new worksheet.
Is it possible to retrieve from the 'clipboard', the values from the associated cells?
And then to parse them into columns in a new worksheet?
Earlier I tried this bit of ( it didnt work )
Sub AddNew()
' for passing highlighted text into the form so that I can pass it
'to a new workbook.
Dim PassData1 As String
Selection.Value = PassData1
Set NewBook = Workbooks.Add
With NewBook
.Title = "xxx"
. SaveAs Filename:="xxx.xls"
End With
Range("A1").Value = PassData1
End Sub
View 9 Replies
View Related
Dec 27, 2012
have two worksheets, "Entry form" and "Database" in my workbook. I am trying to put together a macro button to find the cell value D5(Entry form) in the column A:A (database), if found, copy selected cells (B5:D5,B7,B9) from entry form and paste in the adjacent cells of the row with the value in the database sheet.
VB:
'Match value D3 and replace data
Dim sht As Worksheet, outsht As Worksheet, r As Long
Dim rfoundCell As Range
[Code].....
View 9 Replies
View Related
Mar 21, 2009
I am carrying out some sensitivity testing on a model, and would like to greatly increase the speed of the process by being able to call in from a user defined cell a named range, which is then pasted to the right of the cell.
The attached file steps through the process I have in mind.
View 9 Replies
View Related
Mar 16, 2013
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
View 4 Replies
View Related
Aug 29, 2008
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
View 4 Replies
View Related
Mar 26, 2012
Copy data from workbook, open existing workbook, select range and paste. But my copied data is lost.
Sub Select_Copy_Paste()
'
'
Windows("ElektroFunctiesDatabase.xlsm").Activate
Sheets("PowerSupply's").Select
Range("A2:I6").Select
Selection.Copy
[Code] .........
' Here i need to do something to paste data into r.address?
View 4 Replies
View Related
May 12, 2014
I need to copy Paste Column A,B,C and D column into the end of the sheet with their headings.
View 8 Replies
View Related
Aug 30, 2008
I'm trying to copy the non blank cells in an area ("B120:K239"). and special paste (values only) to the next blank row of the actual work area (3 pages) within the worksheet. The area that this needs to paste to is between("B10:K29, B44:K63, B78:K97"). Problem is that if there are more rows to be copied and pasted then there are open rows on the first sheet it gives an error due to the rows outside those areas having different formats (merged cells and that)
Question: Is there anyway to special paste between ranges? I've tried to hide the inbetween rows and that still doesn't work. Could it be possible to add something to this code to ignore hidden rows or to only paste to visible rows?
Sub Special_Paste ()
Application. ScreenUpdating = False
With Range("B119")
. AutoFilter Field:=2, Criteria1:="<>"
With Range("B120:K239")
Application.CutCopyMode = False
.Copy
With Range("30:43")
.EntireRow.Hidden = True
With Range("64:77")
.EntireRow.Hidden = True
Dim NextRow As Range
Set NextRow = Range("B97").End(xlUp).Offset(1, 0)...............
View 8 Replies
View Related
Jan 23, 2014
I have a workbook with 2 worksheets, Sheet1 and Sheet2 have the same column headings in Row 1 but they are not in the same positions.
What I need to do is read the column header in Sheet2 Column A (Cell A1) and copy the data from A2 to last row and paste it in Sheet1 in the first empty cell under the same column heading, which may be the Column D position instead of Column A like in Sheet2.
It needs to loop through all the columns in Sheet2, copying the relevant data to under the correct header in Sheet1.
View 2 Replies
View Related
May 23, 2012
What can I add to the macro I already have in place (below) to accomplish what I'm looking for (2 parts)? ...
1) I need to copy everything (formulas) that is in C7:F7 and paste it down to all "active" rows - I'm defining an active row by any row where column A is not blank.
2) I need to copy everything (formulas) that is in Q7:AF7 and paste it down to all "active" rows - I'm defining an active row by any row where column P is not blank. (You'll notice by the screenshot that there will be blank cells in column P mixed in with non-blank cells.)
Code:
Sub AdminTool()
'
' CreateAdminTool Macro
'
'
ActiveWindow.Zoom = 90
Rows("1:1").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
[Code] ...........
View 7 Replies
View Related
Sep 25, 2009
i facing another problem at here and do not know how to write the part of coding. it is pending for 2 weeks. i do not know how to explain so i attach the excel to explain. i hope can get any reply soon.
View 2 Replies
View Related
Dec 18, 2008
I need a macro that will copy a selected range from an existing worksheet in a workbook and paste the data to the last row in another workbook on a particular worksheet.
View 7 Replies
View Related
May 24, 2007
Is it possible to write vba code to copy the range A1:A20 from my workbook to a new workbook?
View 4 Replies
View Related
Jul 28, 2007
Copy and paste the values only from one workbook and a set of named ranges (Name1, Name2, Name3) but only the rows within the range were TRUE is found in column A - To a CLOSED workbook named Data / Sheet1 - located at C:NetworkTemplate starting with cell B10.
View 9 Replies
View Related
May 8, 2009
This spreadsheet must perform calculations for every line since new items are added every day, so VBA is probably better than copying formulas down every line of the spreadsheet:
With the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
Also, I need to keep a total of all items by month as well as a monthly and annual average of the Total Item Value on the FY09 tab. This will eventually produce another sheet when a button is pressed to submit as a report. I think part of this answer is in using the MONTH(serial_number) function but I can only get this to work for a single cell. I need to search the entire Distribution 'D' column, match all the months to the FY09 tab to the respective month, and calculate the totals and averages. I think SUMIF may also be needed as well but need the MONTH(serial_number)to work first. If there is a way to code all of this in VBA that would be fine as well.
I have a pivot table on Sheet1 where I am trying to get the totals and averages described above but I am not sure it can do what I need. In column 'B' I need the total number of each item as well as the total number of all items. I tried various formats and adding the totals from the Totals tab but I have not figured it out.
View 7 Replies
View Related
Jan 24, 2014
how do i go about creating a macro to copy a range in sheet 1 in workbook A and paste that to a new tab(the last one) in the existing workbook B. i would like the tab to be renamed based on a cell value. preferably workbook B doesnt have to be open, and the save and close it
View 6 Replies
View Related
Sep 13, 2007
I am looking for either formula which will allow me to copy data from a workbook with multiple named sheets into a workbook with a single named sheet. For instance workbook 1 has sheets named bob, sue, and tom and there is a workbook 2 which only has sheet bob. I want to copy the range fo data from sheet bob in workbook1 to workbook 2 as long as workbook 2 has sheet bob.
View 2 Replies
View Related
Aug 3, 2012
I have a macro that takes info/data from multiple sheets in the Basin workbook and summarizes it into the Median Database workbook. I need to copy the values in range B5:EM5 in every sheet (each sheet name is site #) in the Basin workbook and paste that range into the median database workbook row with the corresponding site.
Here is what I have so far
VB:
Sub Median_Database()
'This Macro takes the median from each station tab in the current Basin workbook
'And inserts it into the Median Database workbook
[Code]....
how to grab the sheet name and insert it in the median database. The problem is the copy/paste of the range in each sheet. The macro locks up every time.
View 2 Replies
View Related
Jul 17, 2008
I need to copy and paste a range from one workbook to another workbook automatically.
Basically, I have 180 files in a folder. The details are:
1) 90 master files
2) from these a range named "COPYTOE" has to be copied and pasted into another 90 report files.
3) I have list of files & its passwords in a separate file named FNAME.XLS. In this, Sheet1, A1:C the details consist like this: ....
View 11 Replies
View Related
May 4, 2008
I'd like to know if it is possible to run a macro in a workbook that will open another workbook (of the users choice) extract data from it, such as columns from its sheets then paste that data into the workbook the macro is running from. The file to be opened will change, so i've found some code that enables the user to select the file to open then open it.
Dim strFile As String
strFile = Application. GetOpenFilename
If strFile <> "False" Then Workbooks.Open strFile
This brings up the standard windows choose file to open box, then opens the selected file. Am I correct in thinking that the Dim here will store the file name I select in the open file box? If so, I'd like to know how to select the workbook using the dim so I can manipulate it from the workbook I'm running the macro in. Incidentally, once the the data has been copied, I'd like the workbook opened with the macro to be closed.
View 5 Replies
View Related
Apr 6, 2013
I have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook
Copy range (c8,d69)
Close work sheet
Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
week 1 week 2 week 3 week 4
Product
quantity
cost
quantity
cost
cost
quantity
cost
1
2
3
4
5
6
7
8
View 7 Replies
View Related
Dec 13, 2006
I need code to copy rows from a filtered list on one worksheet and insert at a specific point in another worksheet.
What I would do if doing it manually is to "select the visible cells, copy, go to the other worksheet, select the point I wanted to insert the data and select Insert Copied Cells".
When I try to record this with the macro recorder I don't see the option Insert Copied Cells.
View 9 Replies
View Related
May 19, 2009
I am successfully opening a .csv file using a variable value stored in a named range in my Main file (the variable includes the directory and path).
I copy data from the .csv file to the Main file then I need to close the .csv file without saving but I want to do that by using the
Windows("xxxx").Activate
command where "xxxx" is the namedrange in my Main file which stores the .csv filename (without the directory and path prefix).
I can use the
ActiveWindow.ActivatePrevious
command but if I have another workbook open, this one closes instead of the .csv file I opened from the macro.
I realise this is probably very basic and I've searched the forums but can't find any identical postings.
View 5 Replies
View Related
Apr 8, 2009
i need a macro that will copy data based on the column headings, i have two worksheets, the first worksheet is the raw data and second worksheet will be the results sheet, the issue is the headings i have in raw data is different to the headings i have in the results sheet and the heading will not always be in same column in the results sheet, so for example in Raw data i have heading Quantity and in destination sheet i have heading Units, so the macro should copy the data for quantity in sheet raw data and paste to sheet "Results' under heading "Units". The header row on both sheets is row 3. I do have more headers but if I know how to do one then i can apply the same method for the others.
Sheer raw data
Quantity 820,655.00 177,015.00 6,652,041.00 1,517,267.00
Sheet results
Units 820,655.00 177,015.00 6,652,041.00 1,517,267.00
View 9 Replies
View Related
Aug 8, 2014
Task:A user has to copy and paste a range of cells, if any row in column B has "PM" as a value.
I have several macros/VBS scripts that copy and paste from one workbook to another, how do I create a macro that says whatever row "PM" is in copy range F:BC on that row
My issues is the fact the PM can be in any row in column B in different sheets. Example.xlsx
View 6 Replies
View Related
Jan 22, 2008
I have 2 ranges: 1."Task info" (4x4 range)
2." Dates" (24x2 range)
I have one variable cell ref: "Date1" (a date)
Based on "Date1" I want to copy the value in the "task info" and Paste special value that is next to the corresponding date in "dates".
View 4 Replies
View Related
Feb 13, 2013
I require a VBA code to fill Zero for empty cell in seceleted Range. Range will be select by Mouse.
I try following Code.
But It will not sucessed.
HTML Code:
Sub Zero()
Dim ws As Worksheet
Dim Specifiedrange As Range
Dim Rng As Range
[Code]....
View 5 Replies
View Related
