I need code to copy rows from a filtered list on one worksheet and insert at a specific point in another worksheet.
What I would do if doing it manually is to "select the visible cells, copy, go to the other worksheet, select the point I wanted to insert the data and select Insert Copied Cells".
When I try to record this with the macro recorder I don't see the option Insert Copied Cells.
I have a table of data with column headings. I'd like to be able to filter the table based on the column headings, however I have a 'spare row' between the column headings and the data which I use to add new entries to the table using a macro (the macro copies the row and pastes it in one of the empty rows at the bottom of the table, then sorts the data which places it with the rest of the data).
The problem is, Excel won't let me apply a filter to the table if the column headings are separated from the data that I would like filtered.
I have a worksheet with some info that is filled in from other employees. I have Customer Name, Date of Oldest Invoice, Avg. Days Beyond terms in column N42:N44, with the data in column M42:44. I want to copy and paste that into another workbook, I need to transpose the data and then paste it into the next blank row. IF POSSIBLE, I would like to have some of the column headings the same as the above fields, and I would like to paste the data into the correct column heading.
Currently I have the code listed below. It copies the data, opens the spreadsheet, (this is where it fails) find the next blank row and transpose and paste the data. It does transpose and paste the data but it does not look for the next blank row, instead it just transposes and pastes the data in the last cell that was active when the work book was closed.
Code:
Private Sub CommandButton1_Click()' Paste Macro
' Macro recorded 5/14/14
'
'
Range("O42:O47").Select
Selection.Copy
Workbooks.Open Filename:="L:Financial Services! FRA !! Preston !3rd Party Collections Accounts 2014.xls"
[Code] ..........
i have issue copying data from a filtered sheet to another sheet. i only want to copy visible cells....ie when there is no data or data after filtering i have: selection. currentregion.copy. this dosent work as when there is no data it still copies my column headings in row A1 across to row r1 and then to next sheet. how do i write code that will only pick up the filtered data starting in first cell...ie after filtering this could be any number. for example i only want to copy data if row 2 and downwards has data
View 2 Replies View Relatedhow I can copy top 15 visible values from a specific column in an autofilter, without actually setting the "top 10" values in the macro for that column. So somehow copy the first 15 cells. The code should fit somehwere in this I guess:
Sheets("A").Select
Columns(5).Cells.SpecialCells(xlCellTypeVisible).Copy
Sheets("B").Select
Range("M6").Select
ActiveSheet.Paste
Could I put an extra variable by the .paste so it only pastes 15 values. Perhaps behind the copy??? I've tried to put .Cells(15) but that doesn't work either, which is a pitty. I'm clueless here, and couldn't find anything regarding this (without using fixed ranges, ...)
This code was provided this forum. It is so close to what I need. The only difference is that I need the copied lines inserted.
Actually, I needed Destination to pick EndT2 (on Sheet2), then select one row down from it and then insert what was copied... -R-
Sub CopyFilteredRangeNoHeaders()
Dim rTable As Range
Set rTable = Sheet1. AutoFilter.Range
Set rTable = rTable.Resize(rTable.Rows.Count - 1)
'Move new range down to start at the fisrt data row.
Set rTable = rTable.Offset(1)
rTable.Copy Destination:=Range("EndT2")
I would like to copy a column from a filtered range to notepad. The main steps of this method are these:
1.Copy the original range to a blank range(range1) as text and filter
2.Select the required rows and copy
3.paste the values to A1000 (range2)
4.open notepad and set the filename by a cell value
5.paste the range to notepad
6.delete range1 and range2
Unfortunately, I use macros and vb not so often, so I'm not expert in it.
I have found two useful code, but I don't know how can I combine them.
For step 1
Sub Copy_Filter_Range() ...
I'm trying to do is copy filtered data. I select my column and copy it, filtered, no problem. But then my code bugs out when it tries to copy the next column.
If Sheets("CT Summary"). Cells(4, 6).Value = "P1264" Then
Sheets("Mam Roll-up").Activate
'Copy CEID's.
Range("L4:L134").Select
Selection.SpecialCells (xlCellTypeVisible)
"Selection.SpecialCells (xlCellTypeVisible)" works in the first block, but bugs out on the second.
I wonder - is there a way to copy the green range over the filtered cells in col. C !? (I want to Copy range D20:D23 on to cells: C5, C9, C13, C17). I tried to select "Visible Cells Only" as the target for Pasting onto (using [F5] etc...) but no success. I prefer a solution that does not involve VBA. *** see attached picture.
View 2 Replies View Relatedhow do i go about coding a macro so that it can look at a column,lets say column F in this case, on a worksheet and figure out how many rows contain data, select all rows BUT the header row (row 1 in this case), select them for copy, and paste them to another spreadsheet in the xls file starting from row 2, pasting values only.
the way i would LIKE to do this function is to take column 1, determine its length, or how many rows contain data and where the first empty row kicks in, anchor that into a variable and use that variable to set the copy paste function for the remaining columns i run the function on. why do i need this done? i'm makign a macro that can automatically build reports for me from raw data dumpted from the system.... and later columns in the spreadsheet have empty cells, so i want the function to process at a fixed length with all cells using column one as a guide for the copy/paste function
My simple copy and paste macro copies data but while pasting it pastes data starting in cell A1 rather than A5. Code is as below. I thought of copying cell by cell but the problem is that this is only a very small part of code. Below code copies column C in source file and pastes into column A of destination file.
I would be doing about 50 of these columns transfers between two files and thought that copying cell by cell would take ages to run.
1) Can someone please help me resolving the above problem i.e pasting data in cell A5 rather than A1.
2) Secondly how can i add an OR to the autofilter criteria? for example below code filters based on criteria "CS"? what do i need to do to filter based on "CS" or "AS".
Simple macro formula. I want to have my function to insert a column and copy over some data headings here is what I have...
Sub Macro17()
'
' Macro17 Macro
'
'
Selection.End(xlToLeft).Select
range("D5").Select
[Code] .........
The issue I am having is that is it inserts the column AA (end of the original data) and I want it to insert at the end of all the data. For example if I run the macro once it posts in column AA, I want the next result to post in AB but it posts in AA.
I need to copy Paste Column A,B,C and D column into the end of the sheet with their headings.
View 8 Replies View RelatedI want to filter the data and next. I want to copy the data from sheet1 to sheet2;
below code working fine, but.
Sub CopyFilter()
Dim rng As Range
Dim rng2 As Range
With ActiveSheet.AutoFilter.Range
On Error Resume Next
Set rng2 = .Offset(1, 0).Resize(.Rows.Count - 1, 1) _
.SpecialCells(xlCellTypeVisible)
On Error Goto 0
End With
If rng2 Is Nothing Then
MsgBox "No data to copy"
Else.............................
I have a workbook with 2 worksheets, Sheet1 and Sheet2 have the same column headings in Row 1 but they are not in the same positions.
What I need to do is read the column header in Sheet2 Column A (Cell A1) and copy the data from A2 to last row and paste it in Sheet1 in the first empty cell under the same column heading, which may be the Column D position instead of Column A like in Sheet2.
It needs to loop through all the columns in Sheet2, copying the relevant data to under the correct header in Sheet1.
i need a macro that will copy data based on the column headings, i have two worksheets, the first worksheet is the raw data and second worksheet will be the results sheet, the issue is the headings i have in raw data is different to the headings i have in the results sheet and the heading will not always be in same column in the results sheet, so for example in Raw data i have heading Quantity and in destination sheet i have heading Units, so the macro should copy the data for quantity in sheet raw data and paste to sheet "Results' under heading "Units". The header row on both sheets is row 3. I do have more headers but if I know how to do one then i can apply the same method for the others.
Sheer raw data
Quantity 820,655.00 177,015.00 6,652,041.00 1,517,267.00
Sheet results
Units 820,655.00 177,015.00 6,652,041.00 1,517,267.00
I have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
I worked on a workbook which has multiple worksheets( mine has 6). The data doesn't start from A1. I want to copy the data from each worksheet into a sheet called summary. I want to create the macro that would only copy the heading row once.
WB test.xlsxWB test.xlsx
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
Is there a way of Copying the Characters in a Cell but excluding the text from the copy.
EG:
305 GP
1,328 GP
10,250 GP
1,337 GP
But i only want the numbers and not the GP.
GP is Always at the end.
How can I copy a range and paste it excluding the lines with a zero value. The sample attached explains it better.
View 6 Replies View RelatedI want to sum a range of cells that are referencing another spreadsheet using a vlookup function, eg:
#N/A
#N/A
#N/A
51
78
73
i dont want to delete the formulas that are returning the #N/A but i want to be able to sum only the numeric values from the six cells.
I would like to be able to find the largest visible area of continuous rows in a filtered table. I know one possible way would be to loop through visible cells using the "xlCellTypeVisible" property and count cells in each visible area. However, the data is consisted of tens and sometimes hundreds of thousands of rows so I was wondering if there is a faster, more efficient way to do this.
View 3 Replies View RelatedI need to be able to query a large date range by a small beginning and end date range and return a count when the value is = each search criteria. i.e. - Search one year of dates from a table by Beg: 7/23/2012 to End: 10/21/2012 and return a count. The beginning and end dates are dynamic and I will need to reference the cells, i.e. B102 "Beg" B102 "End" and not a static date.
View 7 Replies View RelatedI have the following code from a form. It works just fine copying named ranges from one sheet to another. The probloem now is that I don't want to copy the characteristic of the formating or whether they are protected or not. The originating spreadsheets have cells that are protected. I am trying to copy those values over to the new sheet and paste their values or formulas but not their formatting (background color) or the fact that some of the cells are 'locked'. I want the new sheet to have the values and formulas but not the be lock for the user. Is this possible with the current way I do the code or do I have to rewrite it? How would you approach this?
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "NPA"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
' Let user select source datafile
Call UserSelectFile_WOpen(wkbDataFile)
If wkbDataFile Is Nothing Then
MsgBox "User did not select a workbook to open"
Exit Sub
End If
Application. ScreenUpdating = False
Set wb = ThisWorkbook
Application.DisplayAlerts = False
How to get the small value excluding zeros?
small(Convention!$I$3:$I$1000,rows(Dashboard!$D$41:$D41))
I am applying the sum function to a range of cells in a column. I've Auto Filtered my sheet to only include the data I need. Unfortunately, the sum function is adding everything in that column, even data from the 'hidden' cells that I've filtered out. I need to know what condition or parameter to apply to the sum function (or any other function for that matter), that will only add the data shown on my screen. Not the data that is hidden.
View 2 Replies View RelatedIm trying to filter a name range of 12 columns in vba. However im able to emit ZEROS but NOT blanks when i usse AutoFilter Field:=12, Criteria1:="0" it stil contains some blanks in the filtered data
View 1 Replies View RelatedI have the code below which filters and copies columns. My issues is that this filters and copies all data. I would like to filter all this data from another column before running the macro. And for this code to only then filter and copy the already 'manually' filtered data. Does anyone know how I might go about doing this?
Sub sortdescript2()
Dim rngData As Range
For Each rngData In Range("E4:CR258").Columns
rngData.AutoFilter Field:=1, Criteria1:="<>"
rngData.Copy
rngData.EntireColumn.Cells(263, 1).PasteSpecial xlPasteValues
rngData.AutoFilter
Next
Is it possible to copy data that has been filtered on one tab into filtered data on another tab? I've attached an example, i'm trying to copy the values from column C on the 'From' tab to column D on the 'To' tab. I think the data is always going to be an exact fit in terms of the number of cells copied from and to.
View 1 Replies View Related
