Macro That Will Copy Data Based On The Column Headings
Apr 8, 2009
i need a macro that will copy data based on the column headings, i have two worksheets, the first worksheet is the raw data and second worksheet will be the results sheet, the issue is the headings i have in raw data is different to the headings i have in the results sheet and the heading will not always be in same column in the results sheet, so for example in Raw data i have heading Quantity and in destination sheet i have heading Units, so the macro should copy the data for quantity in sheet raw data and paste to sheet "Results' under heading "Units". The header row on both sheets is row 3. I do have more headers but if I know how to do one then i can apply the same method for the others.
Simple macro formula. I want to have my function to insert a column and copy over some data headings here is what I have...
Sub Macro17() ' ' Macro17 Macro ' ' Selection.End(xlToLeft).Select range("D5").Select
[Code] .........
The issue I am having is that is it inserts the column AA (end of the original data) and I want it to insert at the end of all the data. For example if I run the macro once it posts in column AA, I want the next result to post in AB but it posts in AA.
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
I have a workbook with 2 worksheets, Sheet1 and Sheet2 have the same column headings in Row 1 but they are not in the same positions.
What I need to do is read the column header in Sheet2 Column A (Cell A1) and copy the data from A2 to last row and paste it in Sheet1 in the first empty cell under the same column heading, which may be the Column D position instead of Column A like in Sheet2.
It needs to loop through all the columns in Sheet2, copying the relevant data to under the correct header in Sheet1.
I have a workbook with 2 worksheets being used. Sheet 1 has the months of the year starting with Jan in A1, Feb in B1 etc. On Sheet 2, I have a column of information. The first cell in the column eg. B1 has data validation list based on the months on Sheet 1. The information in the rest of the colum on Sheet 2 needs to be copied to the relevant colum on Sheet 1
how do i go about coding a macro so that it can look at a column,lets say column F in this case, on a worksheet and figure out how many rows contain data, select all rows BUT the header row (row 1 in this case), select them for copy, and paste them to another spreadsheet in the xls file starting from row 2, pasting values only.
the way i would LIKE to do this function is to take column 1, determine its length, or how many rows contain data and where the first empty row kicks in, anchor that into a variable and use that variable to set the copy paste function for the remaining columns i run the function on. why do i need this done? i'm makign a macro that can automatically build reports for me from raw data dumpted from the system.... and later columns in the spreadsheet have empty cells, so i want the function to process at a fixed length with all cells using column one as a guide for the copy/paste function
I have a worksheet with some info that is filled in from other employees. I have Customer Name, Date of Oldest Invoice, Avg. Days Beyond terms in column N42:N44, with the data in column M42:44. I want to copy and paste that into another workbook, I need to transpose the data and then paste it into the next blank row. IF POSSIBLE, I would like to have some of the column headings the same as the above fields, and I would like to paste the data into the correct column heading.
Currently I have the code listed below. It copies the data, opens the spreadsheet, (this is where it fails) find the next blank row and transpose and paste the data. It does transpose and paste the data but it does not look for the next blank row, instead it just transposes and pastes the data in the last cell that was active when the work book was closed.
Code:
Private Sub CommandButton1_Click()' Paste Macro ' Macro recorded 5/14/14 ' ' Range("O42:O47").Select Selection.Copy
Workbooks.Open Filename:="L:Financial Services! FRA !! Preston !3rd Party Collections Accounts 2014.xls"
My simple copy and paste macro copies data but while pasting it pastes data starting in cell A1 rather than A5. Code is as below. I thought of copying cell by cell but the problem is that this is only a very small part of code. Below code copies column C in source file and pastes into column A of destination file.
I would be doing about 50 of these columns transfers between two files and thought that copying cell by cell would take ages to run.
1) Can someone please help me resolving the above problem i.e pasting data in cell A5 rather than A1.
2) Secondly how can i add an OR to the autofilter criteria? for example below code filters based on criteria "CS"? what do i need to do to filter based on "CS" or "AS".
I worked on a workbook which has multiple worksheets( mine has 6). The data doesn't start from A1. I want to copy the data from each worksheet into a sheet called summary. I want to create the macro that would only copy the heading row once.
I want to filter the data and next. I want to copy the data from sheet1 to sheet2; below code working fine, but.
Sub CopyFilter() Dim rng As Range Dim rng2 As Range With ActiveSheet.AutoFilter.Range On Error Resume Next Set rng2 = .Offset(1, 0).Resize(.Rows.Count - 1, 1) _ .SpecialCells(xlCellTypeVisible) On Error Goto 0 End With If rng2 Is Nothing Then MsgBox "No data to copy" Else.............................
I have created an Profit&Loss excel sheet with all the accounts in column A and then the values for each month, January to December in column B to column K like this:
Column A...............Col B............Col C........Col D........Col E.....and so on Account 1..............2222............58452........5255.........5844.... Account2................5.................45...............25...........458 ....
I've made a macro that creates a textfile and saves it on my desktop, but I get a text file with all the info in the same file, what I want is to get one text file for every month, that is text file number one(january) is: The heading info+column A+columnB
text file number two(February) is: The heading info+column A+columnC text file number three(March) is: The heading info+column A+columnD and so on
In the heading info I have to state the period and then I need the macro to change this for every text file, that is for the january file it has to be "1 to 1", for february "2 to 2" and so on. As it is now it will always say "1 to 1" because that is the values I have entered.
Sub btnSkapaFil_Klicka() Dim strAnv As String Dim strBeloppJan As String Dim strBeloppFeb As String Dim strBeloppMars As String Dim strBeloppApr As String Dim strBeloppMaj As String Dim strBeloppJun As String Dim strBeloppJul As String Dim strBeloppAug As String Dim strBeloppSept As String Dim strBeloppOkt As String Dim strBeloppNov As String Dim strBeloppDec As String Dim strSavepath As String Dim intRad As Integer Dim intStartrad As Integer Dim intSlutrad As Integer Dim fs, a strOrder = Range("I2")...............
I have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
Is there a way I can return a column heading(s) if text is present in a row?
Refer the attachment... ozgrid.xls
Names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'???
is there a way I can return a column heading(s) if text is present in a row?
refer the attachment...
names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'?
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
I have a table of data with column headings. I'd like to be able to filter the table based on the column headings, however I have a 'spare row' between the column headings and the data which I use to add new entries to the table using a macro (the macro copies the row and pastes it in one of the empty rows at the bottom of the table, then sorts the data which places it with the rest of the data).
The problem is, Excel won't let me apply a filter to the table if the column headings are separated from the data that I would like filtered.
1) I have a Master worksheet that combines/appends data from 5 worksheets. The data in the 5 worksheets is cleared on a daily basis once data has been transferred (using a macro) to the Maser sheet.
2) I use the Match and Index formula for the 5 sheets. Column A "Symbol" being the primary value
Problem:
I have Matching column headings " Date" in 2 worksheets, I can only use date data from one of the sheets that contain the date column data. Here is the formula I use in the master to accept data from the worksheet
=If(Sheet1!C2=0,"",Sheet1!C2)
Sheet1 has the column heading "Date" that is linked to Master Worksheet column Heading "Date". Is there a possible way to re-write the formula where It can accept data from either sheets instead of only 1 sheet?
Going back to the fact that I have 2 date columns in 2 worksheets Lets say for example;
I have Symbol AAA in Sheet1 I have Symbol ZZZ in Sheet2 I have Symbol GGG in both sheets......................
I am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.
I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.
I'm trying to create a macro that will look at the values in one column (column G) and whenever there is a new value, it will copy the data from 2 other columns (I and J) into a new sheet with the original column as the title. I can't think of a better way of explaining that so I've attached a sheet with 'Raw data' being the source sheet and 'Outcome' being the hoped for final product.
I have color coded the sheet to show where the data is coming from, but do not want the colors in the actual sheet.
I have a excel worksheet with the following columns: First name, Last Name, Email address, domain of email, product type, date registered. The list consists of about 50,000 entries. I want to sort the list by the domain of email(which I am able to do already) Once this is done, I want to find all instances of where a domain appears at least 10 times on the list(such as webmessenger.com appears 40 times, so I want to get that data).
For those instances where the domain appears at least 10 times, I want to pull those rows out of the intial list and put them in a new list(the new list will be sorted by domain and will only have people who have a domain which appears at least 10 times). To make this a bit more clear, The initial list I have is a list of people who registered to use the software my employer makes. We are trying to locate companies which may have many people using our consumer version of the software. When there is a large amount of people in the same organization using our software, it would benefit them to upgrade to the enterprise version due to enhanced managment features. By running this filter, I can see which companies have at least 10 users registered to use our software. Of course I will remove any Gmail/yahoo mail/msn/hotmail... pretty much any public email domains and just leave the ones that are obviously corporate emails.
So far, I think it probably has to be done with a pivot table... I was able to get a table that tells me how many instances occur from each domain, but I cannot get it to display the actual data(it just says IE. company.com 200, yahoo 120, etc... I need it to show me the 200 rows of company.com emails and extract them to a new sheet so that I can then follow up with company.com and see if they are interested in the corporate version.)
I have a spreadsheet which is updated daily. Row A of the sheet has the date in it, and every day a new column is created for the that set of data. I have the below code which works at the moment:
[Code] .....
I want to use this same code on another spreadsheet to do the same process (I need to copy and paste 4 columns (A,B,C + D, into E, F, G & H, then tomorrow it will copy E, F, G & H into I, J, K &L etc etc)). The problem I'm having is that A1:C1 is a merged cell, then D isn't (used as a border to separate). So when it is copied I need to select the merged cell columns and column D (i.e. A:C & D on day 1) and paste it into E:H with E1:G1 merged.
I have an Excel Spread Sheet that lists all of the people who have been issued Keys in your workplace, so the row has multiple information columns (Name, Department, Key Code, etc). One row is titled "Left Workplace" and you can select either a Yes or a No. Based on that selction I want it to copy and paste into a different spreadsheet (Either Inactive - if "No" is selected or Active - if "Yes" is selected) What is the best way to go about this?
I am new in Excel. Recently I have to copy a cell data from Pivot table (example value in B1 cell) to new sheet by this week. My problem is this value could move to C1 by next week & so on. I try to use the column label instead of hard coding like cell column name (B1).
I would like to copy and paste the values from a worksheet (HS-Detail) in a file to different tabs depending on the value in column A (Regions). I have a macro that works but it pastes the formulas and it takes quiet a while to run due to the number of records. How can I alter this to paste just the values and speed up the macro?
I have an Excel database of department contracts with a Master worksheet. I have created a worksheet tab for each of the departments. Column G has a dropdown list for each department. When I enter a new contract onto the Master I want it to auto copy to the coordinating worksheet based on the selected department.
If possible I would also like it to enter the newest contract would enter into the coordinating Contract Party entered into column D. (ie... If Hospital A is entered in column D on master, the new entry on the worksheet being copied to will be entered under the last Hospital A, if Hospital B is entered on Master it copies under Hospital B). If this isn't possible then I am not too worried about that part.
I have attached a blank version of the file. Current Master 5-15-14.xlsx
We're working with a large workbook with data from A5:P20000 on sheet1.
I need to be able to pull data from sheet1 to sheet2 based on the invoice number in column A on sheet2.
Sheet2 will have different invoice numbers in column A, some of these invoices numbers are in column H on sheet1. I need excel to find these invoice numbers and copy the data from that row on sheet2 to the row with that invoice number on column2.
Example: Sheet2 A5 has invoice number 1234457 This same invoice number is located on sheet1 H3400 Need to copy to sheet2 (starting in cell B5) the following cells from sheet1 (B3400, C3400, E3400, G3400, H3400, I3400, J3400, K3400, M3400, N3400).
