Im looking for a macro that can get a cell RANGE, the data in the RANGE will be copied then if the checkbox is selected it will copy the same data in the RANGE and add the selected checkbox in next column
I have column A and Column B < this is my selected range
Capture1.PNG
I will have a form that has checkbox and buton.
When all the checkbox is selected. when the button is click. the result will be.
I was asked about if i can copy defined cells when i checked its checkbox by using vba button , and another button in another book to paste those cells .
Mention that i may select more than one checkbox in copying and when i would paste these checkboxes , they would be in queue.
I am having issues with this Macro since I have to run it on computers only supporting Excel 2003 and computers with Excel 2007. The Macro in use is as follows:
--------------------------------------------------------------------------------------------------------------------------------
The rows will differ depending on the Active Cell that's selected and I don't know how to specify this.
The range I want to copy is from Column B to DA on the worksheet ("Staff") which I want to paste to another worksheet ("Leavers"). This is as far as I got
'FindRemove = lstRemove.Value
'If FindRemove = "" Then End
' Goes to the start of the Data column
'Sheets("Staff").Select
'Range("B4").Select
' Tests current cell against FindRemove
'Do
'If ActiveCell.Value = FindRemove Then
'Call CopyPerson
'Exit Sub
'Else: ActiveCell.Offset(1, 0).Select
'End If
'Loop Until ActiveCell.Value = ""
'End Sub
What I would like to do with the information that I have put together on a different workbook is to reference an Agent (column A), and a time range (Date is in column D) and then copy the row from A to I for each occurrence during that range of dates so we can see how many and what errors have occurred during any range of dates selected. (I will have different people inputting errors at different times so the dates will not be sorted unless they have to be). I want to be able to select different agents/date ranges to be able to get a glance of how that particular agent did during this time frame.
Here is an example of the work sheet where the data is originaly.
[Removed]
Here is an example (in a different workbook) of what the sheet should look like if I was searching errors for Albert Ozier between 1/25/2010 and 1/28/2010.
[Removed]
Using macro's on Excel 2010. What I'm trying to do is create a macro that will copy a range of cells from one sheet to another depending on a option being selected from a drop down box. I've tried to use formulas but without success.
sheet 1 contains a list of approx 20 people with rows containing sales figures per week.
Is it possible to have a macro that will copy the rows to sheet2 depending on the dropdown? The drop down has already been setup with people's names
E.g.
if sheet 1, cell a1 (with data validation setup) dropdown contains "mr smith", copy sheet2 row A1:A9 to sheet 1 cell a2
or
if sheet 1, cell a1 dropdown contains "mr cooper", copy sheet2 row B1:B9 to sheet1 cell a2
etc... for each name in the dropdown
The idea is so that i select a dropdown and it copies the sales figures that match the dropdown name, if i then select another dropdown, the corresponding figures are copied to the same place.
I am carrying out some sensitivity testing on a model, and would like to greatly increase the speed of the process by being able to call in from a user defined cell a named range, which is then pasted to the right of the cell.
The attached file steps through the process I have in mind.
I have a worksheet with some info that is filled in from other employees. I have Customer Name, Date of Oldest Invoice, Avg. Days Beyond terms in column N42:N44, with the data in column M42:44. I want to copy and paste that into another workbook, I need to transpose the data and then paste it into the next blank row. IF POSSIBLE, I would like to have some of the column headings the same as the above fields, and I would like to paste the data into the correct column heading.
Currently I have the code listed below. It copies the data, opens the spreadsheet, (this is where it fails) find the next blank row and transpose and paste the data. It does transpose and paste the data but it does not look for the next blank row, instead it just transposes and pastes the data in the last cell that was active when the work book was closed.
Code:
Private Sub CommandButton1_Click()' Paste Macro
' Macro recorded 5/14/14
'
'
Range("O42:O47").Select
Selection.Copy
Workbooks.Open Filename:="L:Financial Services! FRA !! Preston !3rd Party Collections Accounts 2014.xls"
[Code] ..........
married, widows, single checkbox is selected
macro solution
good work.
I need to take data from one sheet named "January" and paste it into another sheet named "Projections Sheet".
I want to use a checkbox to do this. So when the box is checked the data is entered into the next free row on the "Projections Sheet" starting in column B.
For example; I have data in "January" row 6, columns A through F. I need this data copied and pasted to "Projections Sheet" in the next free row (starting in row 6) and starting in column B.
Also, when I uncheck the box in January, I'd like the data removed from "Projections Sheet"
I use few cells with formula and I would need when I click on the cell to run a macro that would copy the selected cell and do a paste value.
View 2 Replies View RelatedI think I have the comand to select a range of cells, but can not figure how to paste this selection later in the spreadsheet.
This is how the application works.
I have a spreadsheet that I am using as a template. The first 10 rows have to be repeated later in the same spreadsheet after I make a manual page break.
I the spreadsheet I am doing the following commands:
With xlApplication.ActiveSheet
xlPageBreakManual
.Rows(istartrow).Pagebreak = xlPageBreakManual
End With
I have a sheet that has columns from A to BS, and the column headers start in Row two.
I need to 1st filter the data by Column E where the data in Column E should not contain a particular Value, like"Sleeve".
Then it needs to copy the Columns A,D,G, BN, BO, BP,BP,BR & BS.
And it needs to delete Rows 3 & 4 from the current sheet, before pasting it in a new sheet.
And at the bottom of the sheet it needs to give me a count of the rows and the month end date for each month.
write a macro - Condition: When i select "Audit Round" = "Round 1" in B2 and press a button it will automatically copy data from B5:B8 and paste special value in C5:C8. Likewise if I select "Audit Round" = "Round 2" in B2 then it should lookup "Round 2" in "Row 4" and paste special values from B5:B8.
Here an example:
A
B
C
[Code]....
I am good at excel but an infant with VBA. I have inserted a checkbox onto my worksheet. I want it, when checked, to select a row of data ("k5:k16") from Sheet 1 and copy it to ("a1:a12") in Sheet 5. When the checkbox is unselected, I want the ("a1:a12") to be cleared. I've tried several different ways to copy and continue to run into errors. I know there is a simple solution, but it's beyond me.
View 2 Replies View RelatedI have a check box that when checked needs to take information from multiple cells and copy into multiple cells and then when uncheck remove the data from the cells.
I have attached a sample.
What I would like to to in Excel:
When I leave the current cell,
1. evaluate the contents of the cell I am leaving (essentially determining if it is empty or not)
2. If it is empty, do nothing
If it is not empty (or maybe if it has a number value in it)
3. Then uncheck a box (a check box form control)
In Access, I would enter code in On Leave property. It would essentially change the value in the text box that would be named or have some other unique method of identifying it.
So I have two issues:
1) In Excel, I do not know to make a macro fire upon leaving a cell
And
2) I do not know how to refer to the properties of a specific check box control. that is, there will be many of them in the spreadsheet and I do not see how to name them. Clicking of properties for the check box gave no hint of it.
have two worksheets, "Entry form" and "Database" in my workbook. I am trying to put together a macro button to find the cell value D5(Entry form) in the column A:A (database), if found, copy selected cells (B5:D5,B7,B9) from entry form and paste in the adjacent cells of the row with the value in the database sheet.
VB:
'Match value D3 and replace data
Dim sht As Worksheet, outsht As Worksheet, r As Long
Dim rfoundCell As Range
[Code].....
Wanted to know if there is a macro that can copy the selection of cells and paste it as a formula with original cell refernce.
For Example :
Copy Selection Cells - Say Cells A1 B1 & C1
and Paste It as formula In Cell D1 as =A1+B1+C1
It might be very simple, but all I need is if I have data on A1, and i have 3 check boxes labeled: NEW, EXISTING, and ARCHIVED. I want it to automatically check the corresponding boxes. So if "NEW" is typed under A1, it'll check "NEW" box. "EXISTING" will check "EXISTING" check box and so on.
View 4 Replies View Relatedwhat is wrong in this code, it does not paste.
HTML Range("A65536").End(xlUp).Offset(0, 0).Select
ActiveCell.Offset(-1, 7).Select
ActiveCell.Copy Destination:=ActiveCell.FormulaR1C1 = "=(R[1])"
I am trying to copy from the selected cell and paste one cell below(next row) in same column.
I have a spreadsheet that I use for people to make requests.
They can only select from the dropdown menus or the check boxes in the spreadsheet. Some fields are required.
I have a button that they click on to save the workbook.
When they click on it a macro checks if all required fields are completed. If they aren't, The user receives a Message box asking them to complete all required fields.
The problem I'm having is with 5 checkboxes each linked to a cell (B11:B15).
The user can check any or all of the boxes but they need to select at least one.
how I can check if the user selected at least one and if not then I would display a Message box asking them to select at least one?
Here is my code ...
In an Excel user form, I want to display a checkbox only if the user selects another checkbox.
View 4 Replies View RelatedI have a button on the Players worksheet that has this
Why would it not work?
Range("NewData").Range("B5:B" & Cells(Rows.Count, "B").End(xlUp).Row).Copy
Sheets("Players").Range("A3").PasteSpecial Paste:=xlValues
I am trying to copy Column B starting at B5 down to the last used cell in column B. into the players sheet starting at cell a3.
I try it and it highlights 4 cells and that is it???
Michael
I have a code that will allow me to copy three worksheets from an open workbook to a new workbook. That works great, but I only need only a selected range from each of these worksheets to be copied (Range A1:AV60). Here is the code I use to select and copy the worksheets, how do I add a range within this code for each worksheet.
Sheets(Array("Req Page 1", "Req Ext 1", "Req Ext 2")).Copy
I am trying to create a method to select the values of contiguous range selections on excel worksheets.
Users will be making new worksheets in new workbooks out of the data from the old sheets.
Currently users make a selection is and copy it to a new worksheet.
Is it possible to retrieve from the 'clipboard', the values from the associated cells?
And then to parse them into columns in a new worksheet?
Earlier I tried this bit of ( it didnt work )
Sub AddNew()
' for passing highlighted text into the form so that I can pass it
'to a new workbook.
Dim PassData1 As String
Selection.Value = PassData1
Set NewBook = Workbooks.Add
With NewBook
.Title = "xxx"
. SaveAs Filename:="xxx.xls"
End With
Range("A1").Value = PassData1
End Sub
I would like to ask regarding checkbox checking. I have 1 master checkbox and 3 sub checkboxes on the userform, and my target is that if the master checkbox is selected then I want to receive a msg if one of 3 checkbox are not selected when I hit the "Confirm" commandbutton.
View 3 Replies View RelatedI have a spreadsheet that consists for 30 rows of groups of three checkboxes on each row. I want to have only one checkbox per row checked at a time. If the user checks one box while another it already checked then I want that checbox to be unchecked.
I want checkboxes to work like groups of option buttons. Actually, option buttons would be fine but with option buttons there is always one clicked but I need them all clear until the user clicks one. They will start off clear but if the user clicks one by mistake there is no way that I know of to clear it again. Checkboxes will clear again if you click it again so I thought I would use them.
how to have a group of three option buttons or checkboxes that will begin unchecked and be able to uncheck all three is one is checked in error,
I have a workbook containing several sheets, each sheet has a large number of ActiveX check box controls on it.
The controls are presented in groups of three to capture responses to a question (Y/N/NA). If one of the three check boxes is set to True, the other two associated check boxes must be set to False.
What I want to do is avoid having to have an On_Click event sub for every single check box.
I have written a function that will handle updating the related check boxes but I am unsure how to call this function, passing it the name of the clicked Check Box whenever any check box is clicked.
Here is my current code with an On_Click event being used to call the function:
Private Sub chk100_01Y_Click()
' Want to replace this with a dynamic sub that will be invoked
' when any Check Box is clicked and pass the name of that Check
' box to the function
Call Update(ActiveSheet.OLEObjects("chk100_01Y"))
End Sub
I currently have a user form and am trying to make a counter to that will increment if the check box is not selected, but will not increment if the check box is selected.
I am assuming I could use an if then statement for this, under the command_click OK. but I cant get it to work.
