transfer data from several sheets to a master data sheet. The problem I am having now is there are couple blank cells. My code just ignore the blank cells on the master data sheet and paste next to the last cell with content. For example I attached a test excel. with my code. I want to leave the blank cell as it is to keep the same product in one row. below is my code.
VB:
Sub Copypaste()
'
' Macro8 Macro
For Each ws In Worksheets
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
MP1 CT CTfile1.csv CTfile2.csv CV CVfile1.csv CVfile2.csv FT FTfile1.csv FTfile2.csv
...etc - it keeps on going for more subfolders.
- Every subfolder has 2 different .csv files.
- Every file has the same structure. Relevant info: . column B - time string . column C - value
- The files are automatically genarated and report lots of single events (evaluated in Column C) that occurr in a specific time (dd/mm/yyyy hh:mm:ss specified in Column B)
- All files have the same number of lines.
- Line 2 in fileX refers to the same time as Line 2 in fileY; the same for all lines.
What I need is a Macro in a file "Master.xls" placed in folder MP1 to automatically:
1. open each file in the subfolders 2. copy the time string (column B) for A2 down - only needed for the first file 3. copy the relevant info (column C) - in every file 4. close all files
Result: I have a "Master" file with the relevant info of all the others, preceeded by a time string from where I can work (pivot table, graph, etc.). The files can have from 5.000 to 30.000 lines, depending on the day.
I am trying to write a macro that will go to one workbook after another, select a large range and paste it to a master sheet, then repeat for the second workbook but this time paste in the next available row.
I will be adding a weekly report to each sheet, which will have varying rows within it, but always the same column headers.
I want a master sheet that will automatically pull all the rows of data through from each sheet, create a new row if needed but merge rows with the same data name and combine the figures.
I have been trying to make a code that copies all the data in A2:K50 in all the sheets (about 32 of them right now) and paste that information in 1 sheet (Master List). The code does work but for some sheets it only copies the first 2 or 3 records. Also, this code puts the name of the sheet the data came from but for the first 2 records in puts in the Master List its pasting the wrong Sheet name.
Sub SummurizeSheets() Dim ws As Worksheet Dim lastRng As Range
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
i'm have a master spreadsheet of contact details and categories. i want to be able to pull contact information onto other sheets within the same workbook, based on category. example attached.
I am putting together a register of information and it is broken up over a number of sheets i.e. LOG1, LOG2 etc.
I have a master sheet in which I want information to automatically populate based on whether a certain column has the words yes or no.
Ie Column I in LOG1 or LOG2 etc can either be yes or no. Is there a way to populate the Master sheet only with the information of a row in which column I is yes?
I know it would have to be a formula in the master sheet which checks all the sheets and then somehow populates the master sheet downwards if anything is yes but then removes it once that yes becomes a no....
My excel database has a master sheet where all data is included. It consists of 8 columns with two rows of headers (1st row: Sheet title, 2nd row: Categories for the columns like, name, salary, emp. start date, Boro,emp. number...etc.
Master sheet aside, I have 12 other sheets in the same workbook (Feb-Jan), we run a fiscal year, not calender. The data that is included in the master sheet needs to copy over to the corresponding worksheet sheet month as long as the date in the emp. start date falls with the month range. For example, if my master sheet has data in rows 4,5,7,9,19,23,101...600 and the emp. start date is in the range of from June 1st, 20xx through June 31st, 20xx then all the data in that row should copy over to the next available row in the month of June's worksheet. The same should happen the months of Feb - Jan.
What I have is a master file that needs to pull info from other sources (a simple copy and paste) those files are called Inventory_xxxx.xlsm . Inside the master file, there are cells with the number of the inventory.
What i need is a way to tell excel to check what number is in the cell, open the files with that number, get the info from the files and paste it back in the master file... and the part that i consider the trickiest, a way to loop it.
For example, lets say i have 2248 in cell A10, it should open Inventory_2248.xlsm copy the contents from cell N4, O4, P4, Q4, R4 and S4(Inventory File) into N10,R10,S10,T10 and U10 (Master file) respectively then in A11, there could be a 2250 so it should open the 2250 file get the info, paste it and so on.....
Now I don't even know if this is do-able or just impossible, been fiddling with various codes to no avail.
So, I'm setting up an accounting book. There's a master sheet that needs to pull from the other sheets that are made. The problem is, with each new sheet that is made, I have to update the formulas on the master. I would like that if I made a new sheet, the master would automatically pull from it.
Example:
Master pulls renter fee info from May 3rd, May 7th
I create sheet (May 15th)
Master pulls renter info from May 3rd, May 7th, May 15th
(EXCEL 2003)I have 6 worksheets for 6 separate ad reps that will be populated with customer info. To make my life simple I just want column A from each of the 6 worksheets to show up on a master sheet in column A. But what also needs to happen is if we add and delete customers that also needs to happen on the master. I understand the "=" and then pointing to a cell in another sheet and hitting enter. I got that to work but I just have soooo many cells to work with that would just be way too time consuming.
If a certain email comes into a mailbox with certain parameters eg subject and from criteria is met. Then extract the data from the email attachment (daily order) and add it to a master sheet containing all orders.
I have a macro that transfers (copy/paste) information from one master file to several other individual files. The macro works, but I would like to enhance it by have it spit out errors in the process as follows: if cell A42 on file VP1.xls is not equal to Cell C35 on file Masterfile.xls then make cell E2 ERROR and fomat E2 bold-red, otherwise do nothing. The macro should continue regardless, I just want it to spot errors. I think this is pretty simple is just a matter of inserting an IF formula in the macro which is something i don't know how to do yet.
I need to create a macro to copy the data from time sheets of different employees into the Master sheet. ie., each employee's time sheet details in to a separate sheet. If any employee fails to provide his/her time sheet details. a mail must be sent to the respective employees regarding the Time sheet submission. I am providing the sample data of my files too.
Intentionally TS_Employee5.xlsx timesheet isn't provided. In which case, I have to send a mail to the respective employee, in order to remind him about the time sheet.
I get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
I'm a relatively competent VBA user to a macro recorder and basic editing of custom code level but fall short with writing custom code and don't have much used or proven code I can copy from.
Problem: I'd like to automate a process whereby consolidating certain information within many data files (possibly up to 500) into a single tab within a master file.
At the moment there are only a few data files which are manually consolidated by way of manual links but going forward it will increase significantly, hence the need to automate.
I need to consolidate the following 5 cells from each data file A1, A2, A5, A7, A8 (vertical) into a single row within the master file across 5 columns (horizontal), i.e. each data file will populate 1 row in the master file, one below the other. If there are 500 data files there will be 500 rows of data in the master file.
The data files will be saved in a central location on our server and the master file will sit outside this folder, possibly in a subfolder.
Something which would be handy is a link in the master file to each data file, i.e. if I click on a data row in the master file it would jump to the source data file.
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
I am looking for some code that will take a workbook (that has multiple sheets in it), and for each sheet copy it's content over to a newly created sheet called MASTER. I also want to take the sheet name that is being copied from and place that in column A in the MASTER sheet.
I have a project to compare the months from January 2014 through to June 2014. What I am needing to do is Compare each month's sheet with June's sheet (Jun14) and if a row doesn't exist in Jun14 sheet then copy it to a new sheet. I need to keep the months seperate from each other so every time it compares a sheet to Jun14 it will copy the data that it doesn't see in Jun14 to a new sheet.
I would like to loop through all spreadsheets in a folder, copy sheet "january" from each spreadsheet into a mastersheet. No idea how using vb all help appreciated.
i would like to change the name of the sheet to a cell reference before it gets pasted into the new sheet.
I have a workbook with 8 tabs and one master tab. The 8 tabs are where the user enters information and the master sheet contains all employees from the 8 tabs. All tabs, including the master, have the same columns in the same order. How can I automatically have the information populate to the master tab as information is changed on the tab groups? I had a vlookup on the master sheet going through all of the sheets however it slowed my report down tremendously and caused too much lag.
the code below was created by: JoeMo I'm trying to adapt, but I need to say which worksheet you were to NOT be copied
Code: Sub MergeSheets()'Author: JoeMo 'http://www.mrexcel.com/forum/excel-questions/683803-copying-data-multiple-sheets-appending-master-sheet-reverse.html
I have multiple sheets (lets say for example a 100 of them) where I need to copy a Value from a fixed location (Col#,Row#) from each of the 100 sheets and store it in a column in a Master sheet.. in the end the Master sheet has only two columns.. first column A contains file name (of the sheet where I copied).. then adjacent column B has the copied value.. in other words the Master sheet will have 100 rows and two columns..for this example..
I have a master spreadsheet that list several columns about employees(name, date, event name, etc.). Then I have an indivdual sheet for each employee. I am trying to import the column information for each employee onto their individual sheet based on their name. It is possible to import the individuals data from the master sheet to the individual sheet based on the employee name?
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN SHEET-2 CCI CONTAINS ONLY 19 COLUMN FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
I have an excel file with 9 sheets and I want to copy all the data from those sheets to a master sheet but with out the formulas . I need the values only to appear in the master sheet. I used the following vba macro code which I found it while I was searching for an answer, it did it perfectly except for the formula part. !! I guess, it has to be edited by adding some codes with paste options but I don't know how!
Code: ' CollectMasterData Macro ' Sub CopyToMaster() Dim wkSht As Worksheet Dim DestSht As Worksheet Dim DestRow As Long Set DestSht = Sheets("MasterData")
[code].....
Note: my headers are @ row 1 and 2 and my formula is in column A.
I have a master sheet that contains all data relating to a particular Agent like Agent Code(Primary Key), Name, Bank details etc so on and so forth. Every month I have to make a new sheet which contains only a few of the columns from the master sheet. I have to manually select and copy each column for the specific agents to whom I have to make the payments. Now, I wanted to know..if there is any way in which I can enter only the Agent Code in the new sheet and it will look the code up in the master and copy the values of the relevant fields from the master to the new sheet.
