I have a workbook with 8 tabs and one master tab. The 8 tabs are where the user enters information and the master sheet contains all employees from the 8 tabs. All tabs, including the master, have the same columns in the same order. How can I automatically have the information populate to the master tab as information is changed on the tab groups? I had a vlookup on the master sheet going through all of the sheets however it slowed my report down tremendously and caused too much lag.
I have an excel file with 9 sheets and I want to copy all the data from those sheets to a master sheet but with out the formulas . I need the values only to appear in the master sheet. I used the following vba macro code which I found it while I was searching for an answer, it did it perfectly except for the formula part. !! I guess, it has to be edited by adding some codes with paste options but I don't know how!
Code: ' CollectMasterData Macro ' Sub CopyToMaster() Dim wkSht As Worksheet Dim DestSht As Worksheet Dim DestRow As Long Set DestSht = Sheets("MasterData")
Note: my headers are @ row 1 and 2 and my formula is in column A.
So, I'm setting up an accounting book. There's a master sheet that needs to pull from the other sheets that are made. The problem is, with each new sheet that is made, I have to update the formulas on the master. I would like that if I made a new sheet, the master would automatically pull from it.
Master pulls renter fee info from May 3rd, May 7th
I create sheet (May 15th)
Master pulls renter info from May 3rd, May 7th, May 15th
I work for an insulation company and we have all of our jobs, completed and in progress, on a master worksheet.
Currently there are 437 rows of data (but will increase), and columns A to N with various bits of data.
Row A is a location field - there are 5 locations currently.
I would like to be able to add a new line at the bottom of the master sheet, and then this automatically identifies the location from column A and which worksheet is it to be copied to and then copies the data from that new row to the bottom of the relevant location sheet.
I would also like to be able to update the data in the existing entries (e.g. when a job has been assessed initially, and then completed, I need to put the dates in) and for this to update on the relevant worksheet.
Each worksheet has the same format (columns A to N have the same headings in row 1, then data to begin in row 2).
I wouldn't say I'm an advanced Excel user (otherwise I wouldn't be asking this question), but I do have a fairly good working knowledge of it. Currently using Excel 2010. Would ideally like to be able to do it without VBA as it needs to be uploaded to Google Docs and for others in the company to access online.
If a certain email comes into a mailbox with certain parameters eg subject and from criteria is met. Then extract the data from the email attachment (daily order) and add it to a master sheet containing all orders.
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
I am looking for some code that will take a workbook (that has multiple sheets in it), and for each sheet copy it's content over to a newly created sheet called MASTER. I also want to take the sheet name that is being copied from and place that in column A in the MASTER sheet.
transfer data from several sheets to a master data sheet. The problem I am having now is there are couple blank cells. My code just ignore the blank cells on the master data sheet and paste next to the last cell with content. For example I attached a test excel. with my code. I want to leave the blank cell as it is to keep the same product in one row. below is my code.
VB: Sub Copypaste() ' ' Macro8 Macro For Each ws In Worksheets
I have a project to compare the months from January 2014 through to June 2014. What I am needing to do is Compare each month's sheet with June's sheet (Jun14) and if a row doesn't exist in Jun14 sheet then copy it to a new sheet. I need to keep the months seperate from each other so every time it compares a sheet to Jun14 it will copy the data that it doesn't see in Jun14 to a new sheet.
I am trying to write a macro that will go to one workbook after another, select a large range and paste it to a master sheet, then repeat for the second workbook but this time paste in the next available row.
I have multiple sheets (lets say for example a 100 of them) where I need to copy a Value from a fixed location (Col#,Row#) from each of the 100 sheets and store it in a column in a Master sheet.. in the end the Master sheet has only two columns.. first column A contains file name (of the sheet where I copied).. then adjacent column B has the copied value.. in other words the Master sheet will have 100 rows and two columns..for this example..
I have been trying to make a code that copies all the data in A2:K50 in all the sheets (about 32 of them right now) and paste that information in 1 sheet (Master List). The code does work but for some sheets it only copies the first 2 or 3 records. Also, this code puts the name of the sheet the data came from but for the first 2 records in puts in the Master List its pasting the wrong Sheet name.
Sub SummurizeSheets() Dim ws As Worksheet Dim lastRng As Range
My excel database has a master sheet where all data is included. It consists of 8 columns with two rows of headers (1st row: Sheet title, 2nd row: Categories for the columns like, name, salary, emp. start date, Boro,emp. number...etc.
Master sheet aside, I have 12 other sheets in the same workbook (Feb-Jan), we run a fiscal year, not calender. The data that is included in the master sheet needs to copy over to the corresponding worksheet sheet month as long as the date in the emp. start date falls with the month range. For example, if my master sheet has data in rows 4,5,7,9,19,23,101...600 and the emp. start date is in the range of from June 1st, 20xx through June 31st, 20xx then all the data in that row should copy over to the next available row in the month of June's worksheet. The same should happen the months of Feb - Jan.
how I can keep a running total of information added to a different worksheetS. They would not always be the same peson ID so I would like to return a match on any unique ID number found on multiple worksheets and add their values on a master front sheet. i.e this becomes a running total of items purchased per ID number.
I have an Excel database of department contracts with a Master worksheet. I have created a worksheet tab for each of the departments. Column G has a dropdown list for each department. When I enter a new contract onto the Master I want it to auto copy to the coordinating worksheet based on the selected department.
If possible I would also like it to enter the newest contract would enter into the coordinating Contract Party entered into column D. (ie... If Hospital A is entered in column D on master, the new entry on the worksheet being copied to will be entered under the last Hospital A, if Hospital B is entered on Master it copies under Hospital B). If this isn't possible then I am not too worried about that part.
I have attached a blank version of the file. Current Master 5-15-14.xlsx
I need to create a macro to copy the data from time sheets of different employees into the Master sheet. ie., each employee's time sheet details in to a separate sheet. If any employee fails to provide his/her time sheet details. a mail must be sent to the respective employees regarding the Time sheet submission. I am providing the sample data of my files too.
Intentionally TS_Employee5.xlsx timesheet isn't provided. In which case, I have to send a mail to the respective employee, in order to remind him about the time sheet.
I get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
I have been trying for months to get this to work by altering code from similar requests I've hunted down on google to no avail.
I am looking to have a "Master" sheet that is populated by data from 30+ individual excel workbooks. Each workbook is contained on a server in a directory "O:JobsJobs In Progress." In that directory are subfolders (named in sequence "C12000 Job1", "C12001 Job2", etc) which contain the actual workbook (Named according to number ie. "C12000 Jobinfo").
I would like this "Master" to automatically pull specific values from each C1200* workbook and paste them in a designated cell so that I can quickly look at specific information contained in each workbook. Each C1200* workbook is constructed the same way.
Short Example of C1200* workbook in which data will be pulled from:
Job Number C12000 PM Abe Lincoln Foreman Thomas Edison Contract Date 1/1/10
I have a workbook with a hidden sheet ("Template") and a visible sheet("New Job"). I need code so when cell F1 in "New Job" is populated:
1-the sheet is renamed to the value of F1, 2-a new tab is made (a carbon copy of the hidden sheet "Template") 3-the new tab is named "New Tab" and marked as unhidden.
Public Sub Worksheet_Change(ByVal Target As Range) ActiveSheet.Name = Range("F1").Value End Sub
Function WorksheetExists(SheetName As String, _ Optional WhichBook As Workbook) As Boolean Dim WB As Workbook Set WB = IIf(WhichBook Is Nothing, ThisWorkbook, WhichBook) On Error Resume Next WorksheetExists = CBool(Len(WB.Worksheets(SheetName).Name) > 0) End Function..................
I am trying find a match from multple "text" values.
The values I'm using are flight numbers from sheet "Indiv case" in column (range H2:H51). The flight number could occur multiple time in the column.
The associated flight number sheet "Code & categories" in column (range H2:H257) are associated with the last port of embarkation (range I2:I257) in "Code & categories" sheet.
I need to copy & past the name of the Last port of embarkation from sheet "Code & categories" into sheet "Indiv case" adjcent to the flight numbers in column (I2:I51).
Example: Sheet "Indiv case" from Column (H2:H51) Fligh number Data: UA863, VA4148, EK432, BA15, BA15, VA98, QF8, AC33 etc Using these value from "Indiv case" from Column (H2:H51) search and match valuse in "Code & categories" in column (range H2:H257)
If match found copy valuse from sheet "Code & categories in column (i2:I257) in to sheet "Indiv case" into column (I2:I51) Last port of embarkation".
H2;H257, I2:I257 Flight, Last Post 3k111, Singapore 3k131, Singapore AC33, Vancouver
Copy and Past "Last Port" into sheet "Indiv case (I2:I51) adjcent to matching flight code.
how I can get this thing work. I am trying to create a model/code that copies old sheet and create a new sheet and paste the copied old sheet into the new sheet automatically each month.For instance, if my current sheet is February tab, I wish to create a model/code that copies February month's tab and paste it onto a new sheet, for month of March, at the end of the month.
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
How to automatically copy a row of data from one sheet to another, only if a specific cell contains specific data. It would have to populate on one sheet but read from multiple sheets in the same workbook.
I.E. if tab 213 has "SOP" in column F, I would like to copy the data from that row and insert it into the SOP tab.