Copy Of Names

Jul 27, 2009

I have many different names in column A, and many of these names are repeated several times. How can I copy only one of the names to another sheet? Maybe a very bad explanation so see below: Orginale sheet:

Comlumn A:
A
A
A
A
B
B
C
C

What I want is a sheet with onlly this:
A
B
C

View 3 Replies


ADVERTISEMENT

Copy Cells Into Workbooks Names Mapped From Copy Cell

Aug 20, 2008

1. I have a list of data (Collated Data)
2. For every row in collated data I want to export the cells into a corresponding cell in my predetermined workbook (TAF Form), i.e, Cell C1 on Collated data goes into Cell D3 on TAF Form, cell D1 to cell I3 etc etc
3. Once all cells in one row have been copied into the TAF Form I want that TAF Form to save as "TAF Form & Employee Name" (which would come from cell D3).
4. I then want "TAF Form & Employee Name" to close.
5. I then want the Macro to do the same thing for Row 2, copy the cells, save the form, close the form
6. I want to do this for every row that I have (which varies).

Is this possible? If you have any more questions in terms of what I need, don't hesitate to ask.

View 5 Replies View Related

Copy Spreadsheet With Different Names

Mar 12, 2008

What I’m trying to do is create a Workbook that works within a folder that pulls data from other Workbooks within the same folder.

Example: Workbook name “RATES.XLS” would be the name of the main Workbook with all the information. I would like to be able to pull certain cells from the other Workbooks as they arrive in the folder over to the Rates Workbook.
Every day, two new Workbooks show up in the same folder with a name like “1Name9_MMDDYYYY” and “2Name1_MMDDYYYY”. So the only thing different everyday is the date added to the name of the file and ofcourse the information is different, but formated the same and in the same cells.

Once I get the information from the other sheets linked, I will need to figure out a way to capture the date on the same line and move the data down the sheet within the Rates.xls workbook.

View 14 Replies View Related

Find Names And Copy To Sheet2

Feb 2, 2010

I am trying to write some code that will look up a value in a range of cells and copy the names in column A to another sheet.

I have attached a sample sheet which I hope explains what i am trying to achieve more clearly.

View 6 Replies View Related

Copy From 'Refers To' In Defined Names

Sep 22, 2006

This thread is related to this thread. Offset, Match, Max Formula In the Insert - Name - Define window:

If one wants to copy a formula from the "Refers to" box and the formula extends past the right side of the box, how does one use "select all" or mark the whole formula from beginning to end so it can be copied without messing up the formula. At the moment, when I try this, it changes the formula to include the active cell of the worksheet that's open when I use the Ctrl + c etc. I have tried Ctrl + Ins and Ctrl + a and Ctrl + c. None of these are working for me.

View 8 Replies View Related

Copy Ledger Account Names And Numbers To Each Row?

Apr 22, 2014

I've been working with ledgers to analyze companies financials in detail mostly using pivot tables and charts.

I usually get the data in a format that has the account name and number as a title on top and then each entry for this account under the title. In order to get my pivots working I need to copy the account name and number to each row until the next title.

Here is a picture to understand what I mean: Makrokyssäri.png

So is there a formula or a macro that could avoid doing the copying manually?

View 3 Replies View Related

Where Names Match Copy Cell From One Sheet To Another

Feb 10, 2014

(Matching names)where cell G and cell H in Data Sheet matches with cell A and cell B in template sheet , copy cell K on matching row in data sheet to matching name in cell D in the template sheet.

Could be as many as 50 rows of data in data sheet and only a range of D8 to D15 in template sheet.

Can send example but I cannot see where I have option to attach the file again : place_user.xlsx‎

View 1 Replies View Related

Copy Extension Of File Names To New Column

Jul 9, 2013

I have a column that looks like this, beginning on C10:

Code:
File Name
2316-17-312A.xrdml
2316-17-312B.xrdml
2316-17-312C.xrdml

[Code].....

I want to copy the extension of each file to a new column (File Type). How might I go about this?

View 9 Replies View Related

Copy The Names Of The Docs To An Excel File

Dec 18, 2008

I have many Word docs in a file. I need to copy the names of the docs to an excel file.

View 9 Replies View Related

How To Replace Or 'copy Over' Names To Unique Identifiers

Jan 20, 2009

Have a long list of patients with visit details recorded - over 3 years worth

Many patients are seen multiple times, there is an age recorded also to ensure the same names can be 'set as distinct for different ages'

Need to replace (or add another column) the name field with a unique identifier so that we can ensure the same person has the same identifier.

View 9 Replies View Related

Copy File Names ,date From A Directory

Feb 20, 2009

I need to copy the names and date modified from all pdf files in a open directory. The directory name will change month to month. I will copy the names into an excel workbook that will be opened as well called Shipped starting in sheet1 cell P2

View 9 Replies View Related

Compare 2 Names Ranges & Copy Difference

Aug 11, 2006

I have 2 ranges named MASTER and SUBSET and 1 range named ANSWER. I want to compare ranges MASTER and SUBSET and copy the difference to ANSWER. The ranges have the same number of columns but different number of rows. Sample data is below.

Ideally, I would like a VBA solution executed from a userform button.

Example:
MASTER
aaa apple
aab banana
aac grape

SUBSET
aab banana

ANSWER
aaa apple
aac grape

View 5 Replies View Related

Invoice Templates To Copy The Names And Addresses From Them To Another Worksheet

Nov 19, 2009

I'm trying to figure out a way to get my invoice templates to copy the names and addresses from them to another worksheet to form a customer database if you will.

View 14 Replies View Related

Copy Relative References Whilst Using Range Names

Jul 20, 2006

eg say you call (ie insert a range name) cell A1 "firstcell", B1 "secondcell", then A2 "divisor1" and B2 "divisor2". if you put a formula in A3 which is "=A1/A2", how do you copy and paste this formula into B3 but getting the formula to reference B1/B2 rather than firstcell/divisor1, as it does by default?

View 2 Replies View Related

Auto Excel File Copy And Create Files With Given Names

Jul 13, 2013

I'm looking for one macro code in order to generate the excel files and give the standard excel file names.

Example: I have one master file in the given path like C:Temp and input box required to assign the number of file option. If I declare 10 files then my master file should get 10 copies and save it the above path....

View 2 Replies View Related

Copy Files From Constant URL & File Names Listed In Range

Sep 20, 2009

I have a list of filenames in Sheet1, range A1:A20. These files can be found in URL
http://mysite/x/y. Where y is the filename (including the extension) and x is the 1st 4 characters of the filename. So if in A1 I have the filename AB1234.pdf, this can be found in the link: http://mysite/AB12/AB1234.pdf. Is there a was in VBA where I can loop thru the list in A1:A20, and copy each from their respective URLs and save into C:Documents and Settings ?

View 4 Replies View Related

Copy Pictures To Another Based On List Of File Names In Excel Error VBA

Mar 4, 2014

I am creating a proposal for a online sales store, i have in column A a list of item names that my buyer liked and wants to run, but i have to send them the pictures for the items which is located in a directory on my drive together with all other items. we have 4 category's of pictures 1 is the main image from this we only have 1 of each item, then we have the S category there we may have up to 3 images s1, s2 and s3 not more then 3 and the same is with the R category and with the M as well. We did created a VBA to copy all images from the list into a new directory with all sub pictures into a new sub dir. and bring back a list of all images not found. But i am having a problem when i run the code if it dosnt find the image looking for (for instanse EAR11-M1 the code stopes there looking for the file even the error checking in the code is set to resume what is wrong with code?

View 3 Replies View Related

Add Range Names To List Of Selected Cell & Copy Paste The Chosen Name

Mar 21, 2009

I am carrying out some sensitivity testing on a model, and would like to greatly increase the speed of the process by being able to call in from a user defined cell a named range, which is then pasted to the right of the cell.

The attached file steps through the process I have in mind.

View 9 Replies View Related

List All Sheets Names From Multiple Workbooks & Copy Transpose Certain Columns

Oct 7, 2009

this may or may not be easy for some of you but its driving me nuts. Here's what I need to do.

1.Create a new workbook

2.Cycle through multiple workbooks and all worksheets within each workbook (all in the same folder). All workbooks will have the same structure.

3.Take the worksheet names and put them in rows

4.Take the data from the first column (column A) from the first worksheet of the first workbook and put them across the top (i.e. transpose the data). The first column will be the same in all workbooks so it doesn't matter where I get it from.

5.Copy the data from column E from each worksheet and paste them in rows in the new workbook (again transpose) corresponding to each worksheet.

6. Perform simple mathematical calculations at the end of each row.

I expect to have approximately 26 workbooks with a total of 7000 worksheets. In the target workbook (i.e. the new one), I expect there to be 7000 rows (corresponding to the 7000 worksheets) and about 260 columns.

The only reason I need to transpose stuff is because Excel 2007 doesn't have 7000 columns.

Here's an example of what it would look like.
Example worksheet (Input)-
Worksheet ABC
Col A Col E
1/1/2004 $25
1/8/2004 $30
1/15/2004 $15

Imagine another worksheet called LMN with the same ColA but different values in Col E.

Output workbook
ColA Columns B Column C Column D
Sheet 1/1/2004 1/8/ 2004 1/15/2004
ABC $25 $30 $15
LMN $xxx $yyy $zzz

View 7 Replies View Related

Macro To Batch Copy And Save Worksheets With File Names Listed In Cells?

Oct 23, 2013

I have a workbook that contains worksheets. They are listed as follows:

Sheet 1ABCDEFG

In cells A1 - A49 I have text. What I would like to do is to have a macro that I can run that will basically copy and save new workbooks with sheets A - G copied over and have the new workbook saved with the file name that I have denoted in cells A1 - A49 on Sheet 1. Also, the macro would ask me where I want to save the new Workbooks.

For example, if this were Sheet 1, Column A then the cells below would be the saved name of the new workbooks and the new workbooks would have Sheets A - G in themRed

Blue

Purple

Black

White

Yellow

Orange

Green

Gray

Brown

One more piece of information, the file that is being copied and saved is large (~80MB). If there is a macro that would allow me to simply "save as' the workbook and the Saved Workbooks would be named using the data in Sheet 1, that would work as well in case copying, pasting, then saving may take more time

View 1 Replies View Related

Create Dropdown That Will List All Names Starting With Initial Letter Of Names?

Jan 13, 2014

I have a long customer listing, names 5 to 36 characters and several with their location in the name as well as a few common duplicate names. I am trying to produce sheet where the customers name once selected opens in the customers spreadsheet and data can be added/amended for sales etc.The lists are not in alphabetical order as when created a customer number is automatically allocated. My aim is just to type in the first letter of the name and the dropdown appears the customer is selected and their card appears. I have tried data validation, lookup, vlookup, Dropdown and Match/find. they only return the first record found and no sign of any others. Find returned all instances of the letter appearing in every name.

View 9 Replies View Related

Can Create Data Validation List Of Names Created In Name Box Or Sheet Tab Names

May 7, 2012

Can I create data validation list of the names created in the name box or of the sheet tab names?

View 5 Replies View Related

Excel 2010 :: VBA - Hide Sheets Using Code Names Not Sheet Names

Oct 15, 2013

Code:

Sheets(Array("Sheet 1", "Sheet 2")).Visible = False

How do I convert the above to using Sheet Codes Names, Sheet1 and Sheet2?

Want to ensure my code will work if the user changes the sheet name.

View 2 Replies View Related

Table Names Revert To Cell Names When File Is Reopened

Jan 4, 2013

I have a worksheet with many tables that I use in formulas.

I like tables for a couple reasons, one being the ability to insert/delete rows without affecting the rest of that worksheet row.

Also, automatic copy of formulas/formatting is great.

But, what I really like about tables is the ability to use the naming conventions in formulas.

Problem is when I save this worksheet, after I close it and open it back up, all table references in my formulas have been converted to cell references.

Example:

Code:

=IF((SUMIF('Quote 1'!$M$28:$M$43,">"&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&tblOSSRV[Min Order Cost])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],""&tblOSSRV[Min Parts Per Line])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],"

View 4 Replies View Related

Create Array Of File Names/sheet Names

May 1, 2008

Two part question:

1) I'm relatively new to arrays, but what I need to do is generate a list of file names and the sheets within each one. I would like to use an array for this, but since I don't have much experience.... well....that's why I'm here. Can someone point me in the right direction?

2) And the second part of this.... I was planning on using the FileSystemObject to determine the files in a selected folder and loop through that list of files, opening each one and harvesting the required info (file name and all sheet names). Should I use the FSO or is there something built into Excel that might be better (and also limit the number of dependencies for this little "project" of mine).

View 9 Replies View Related

List Sheet Names And Internal Names Within Workbook

Feb 25, 2011

Is it possible to produce a list on a new worksheet of all sheet names and their their internal names within a workbook?

If so I would like the tabbed name's to begin in say A2 with the corresponding internal name in B2.

View 3 Replies View Related

Looking Names In A List With Names Written Differently And With Duplicates

Aug 26, 2008

I am using Excel 2003 and Windows XP.

I have been given a list of my firm’s target clients (in excel) and an opportunities report (exported into excel) from our CRM system, which lists all the opportunities (i.e. opportunities to sell/provide products/services) that have been created for each client. Some of the column headings in the opportunities report are as follows:

Client; Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created etc.

What I need to do is lookup each client, from the target clients listing, in the opportunities report to see whether an opportunity has been created; and if so, return the row of values (i.e. the Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created) for that client. The result will be placed next to the name of the client in the target client worksheet.

I have a couple of problems. Initially I tried to use the VLOOKUP function to lookup the client name in the opportunities report and return the Opportunity ID (I then planned to use the same formula to return values from the other columns); however, as the client names in the target client listing were not always written the same way as they were in the opportunities report, the formula often returned #N/A. The formula I used was

=VLOOKUP(A8,'Opportunities Report'!A2:F51,2,FALSE)

So for example, the first client that I was looking up was written as “ABC Ltd” but in the opportunities report it was written as “ABC Limited”.

My second problem was that for some clients, there were multiple opportunities listed in the opportunities report. Where this was the case, there was a separate row (repeating the client name in the first column) for each opportunity created. I think that was messing up my VLOOKUP formula as well.

Is there a way to look up the client name, from the target client listing, in the opportunities report even if it’s slightly different and return the row of values for each opportunity created for that client on a separate row?

View 9 Replies View Related

Pulling Out Single Names From A String Of Names

Sep 1, 2009

I have a list of names in a single cell. They are all seperated by a comma, then a space. Example would be: John Smith, Steve Wilson, Wallace O Malley, etc. What formula could I use to pull out the names individually, starting from the farthest right?

View 2 Replies View Related

Reorder List Of Names With Capitalized Last Names

Feb 24, 2014

I'm trying to sort out a list of names from a website that publishes names in the following format:

DOE John
VAN GOGH Vincent
DA VINCI Leonardo
NADAL PARERA Rafael
JIMENEZ RODRIGUEZ Miguel Angel

What I'd like to do is get the names in the following format

John Doe
Vincent Van Gogh
Leonardo Da Vinci
Rafael Nadal Parera
Miguel Angel Jimenez Rodriguez

Basically all the last names - which are all capitalized - would be moved to the end of the text string. Of course any leading spaces should be removed and I guess using the Proper() function, all capitalized words could be capitalized in a standard way.

I found the following function, here: [URL] ...

but what it does is just take the capitalized words and separate them into a separate cell, which is not all of what I want.

View 1 Replies View Related

Replace Bad Names From A List Of Good Names

May 14, 2009

create a script that will replace the names in column A on sheet1 from a Master sheet in the same workbook?

The problem is that different users are entering data on sheet1 col A in different ways example someone may enter Johnc or John C Or John What I want is for something to run down col A on sheet1 and look for the like name on the master sheet if the name matches then do nothing but if the name is like another name on the master sheet then replace the name if they are almost alike.

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved