Copy Range Into Active Cell
I have this code I wrote (combining variations of existing ones).. but not very well. unfortunately doesn’t seem to work. It copies the information back onto itself
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Copy Active Cell Down Adjacent Range To Right
Split from: Clear Range To Right Of Active Cell Down. I was working through this the first step was to clear the contents of the cells. After they are cleared, I have another sub that then goes and retreives a unquie number and places it back at the top of the column that I just cleared. Would this same code that cleared the cells contents work to copy the contents of the active cell down that same column, until the cell to its right is blank? -R-
View Replies!
View Related
Range Copy: Differ Depending On The Active Cell That's Selected
The rows will differ depending on the Active Cell that's selected and I don't know how to specify this. The range I want to copy is from Column B to DA on the worksheet ("Staff") which I want to paste to another worksheet ("Leavers"). This is as far as I got 'FindRemove = lstRemove.Value 'If FindRemove = "" Then End ' Goes to the start of the Data column 'Sheets("Staff").Select 'Range("B4").Select ' Tests current cell against FindRemove 'Do 'If ActiveCell.Value = FindRemove Then 'Call CopyPerson 'Exit Sub 'Else: ActiveCell.Offset(1, 0).Select 'End If 'Loop Until ActiveCell.Value = "" 'End Sub
View Replies!
View Related
Copy Range Of Cells To Active Row In Second Sheet
Sheet 1 has data entered into it, it is then printed out as a jobsheet, saved and the data cleared. There are certain fields on this sheet that are eventually manually replicated onto sheet 2. The row in which they must go on sheet 2 will always be the 'activerow' on that sheet from a previous operation. It would make life so much easier and save lots of time if I could incorporate copying cells C10,C12,K8,K12,M2,C27 and C29 from sheet 1 to respective cells H,I,J,M,N,R,S of the active row on sheet 2 before I carry out the clear data process.
View Replies!
View Related
Copy Active Cell
I have two worksheets with the same column. Would like to edit ex. sheet1 A1 and that sheet2 A1 updates automatically by copying just the value, not the reference.
View Replies!
View Related
Expand Active Cell To A Given Range
When i click commandbutton1: Copy Active cell (columnB), next cell (ColumnC), next cell (ColumnI), next cell (ColumnO) all of which exist in the same row. I will then paste the values into another sheet in the next available row which i think i have mastered. the cells will be pasted next to each other i.e. instead of column B,C,I,O they will be pasted as column A,B,C,D. My dilema is i am not sure if you can use multiple cell offsets to perform this or if it is better to use a loop.
View Replies!
View Related
Sum Range From Active Cell To Last Used
I Have searched existing threads but cannot find the answer to my query, As part of a longer macro, I want to sum all cells in a column which contains data. Each day the number of cells that contain data will vary. I have tired specifying all the cells in the column which contain data as a range, by selecting the top cell and using the Range(Selection, Selection, Selection.End(x1Down)) But I cannot get a SUM Formula of this range. If someone could show me the correct syntax to get a sum from a range like this I would be very grateful.
View Replies!
View Related
Range In Same Row As Active Cell
I'm looking for a piece of code, which would activate a certain Range i.e. the start of which would be in column A and the End in Column G. My problem is that the activated range of cells shuld be exactly in the same row as the currently active cell i.e. active cell B3 -> activated range A3:G3 .
View Replies!
View Related
Expand Active Cell To New Range
I have some working code that makes a number of changes to an excel report using VBA. Each time I execute the code I am taken to a different point in the excel report (depending on user inputs). What I now need to do is to change the cell selection from a single cell to three cells. For example, my code may result in cell B100 being the active cell. What I now want to do is change the selection from B100 to the range B100:B103. I would have thought I could write something simple like: Sheets("Group").Range("ActiveCell:Offset(0, 2)").Select I have tried every variation of the above but I can't seem to make it run. Where am I going wrong?
View Replies!
View Related
Select A Range Based On Active Cell Location?
I'm trying to select a range of cells whereby the range is dependent on the currently active cell. I know you can use the "Activesheet.Range("A1:D2").select" method to select a range where the cells are always the same, but I'm after a dynamic selection where the values can be programmatically altered depending on some other result. For example, let's say that I make a certain cell active (based on the result of some other formula), and I want to select the range of cells in the adjacent column that is X rows deep. Putting this into context, imagine the resultant active cell is B2, I then want to select the range C2:C10, but if the active cell is E10, the range selected would be F10:F18 (if active cell is X, then range would be Y:Z). The Offset function would allow me to position the cell based on the current active one, but it doesn't let me select a range. The Range function only lets you choose either hard coded or index cells, e.g. "Range(cells(y,z), cells(y,z)).select", but this is still no good because I'd need to know the index value of the active cell (can this be done?).
View Replies!
View Related
Merge Range Based On Active Cell Row
I am working on a macros that creates a new row for every data entry. Below is the macros that I have. In the new row, I want for the cells in columns F through O to merge right after creating the row. How do I go about this? If Sigma = 0 Then Selection.EntireRow.Insert ' New row for new entries ActiveCell.Value = "NONE" ActiveCell.Offset(1, 0).Select End If
View Replies!
View Related
Range X Rows & X Columns From Active Cell
Im writing a macro and have a cell activated (using ActiveCell). If I want to select this cell (the activated one - i.e., k3) along with the 2 cells next to it (i.e., l3, and m3), how would i go about doing that? I'm wanting to shift 3 cells downward and I know how to shift them down, but dont know how to select the cells i want.
View Replies!
View Related
Copy Active Worksheets Into One New Workbook
I have 16 proposals that are either hidden or visible in a proposal generator. I need to be able to copy only the visible worksheets over to a new workbook that uses a name from a cell inside the proposal generator. Then a save as prompt to force the user to save the file wherever they choose.
View Replies!
View Related
Copy Data: Always Work With File A (active)
I open 2 files : A & B. Once I finish copying data from B into A. I close B and open C and so on. That means I always work with file A (active) File B, C or D and so on has 3 worksheets with identical names. The filename of B, C and so on also has some common word I'd like to copy data into sheet1 of file A, always same range : B2:B100 , afterwards I would copy-paste each result from sheet1 to another sheet of file A and delete the data in sheet1. So sheet1 of file A is always active and show the result each time the macro was run as follows. Cell b2 of file A = cell c1 of sheet 1 of file B Cell b3 of file A = cell d1 sheet 1 of file B + cell e1 of sheet 2 of file B
View Replies!
View Related
Copy Ranges From Closed Files To Active Workbook
I have a number of files in a directory, with data in columns A:E, and variable rows deep (200-300) that I’d like to copy to the active workbook. I’d like to have a file window open to the same set directory (ie. “CArchives” and be able to select any file in that directory to copy. Note: There are 2 separate ranges to copy, which must be done separately because the headings are to be moved 2 columns over - also, there is data in beteen the headings and main data in the active workbook. Range 1: Two headings cells in A1:B1 get transposed to C1:D1. Range 2: the files’ data starts at A4 but gets inserted starting at cell A6 of the active workbook.
View Replies!
View Related
Copy Data From Open File To Current Active Workbook
I want to create a standard macro that will copy values from a Master workbook to the current, active workbook I have open. The problem I have run into is when I record a macro it also records the name of the active workbook I'm copying data into and I would like it so when I bring up a workbook I just run the macro and it copies the values in. I'll be doing 8 different macros that each copy different values from the Master spreadsheet
View Replies!
View Related
Copy Cell Range To A Cell Comment
I have a recipe and a set of instructions on a worksheet in the cell range A1:H50 and would like to copy the whole range to a single cell as a Comment. At the moment I select the range, copy and paste it to MS Word. In Word, I select all and copy, then back in Excel, select cell, insert Comment then paste the text into the Comment box. Then I have to resize the Comments box. Also doing it this way loses some of the original formatting I could get round that by saving the cell range as a picture and inserting the picture in the Comments box. Surely there has got to be a better way. Using 2007 Excel & Word
View Replies!
View Related
Sort Range On Non Active Sheet
I'm trying to sort data on sheet1 and sheet2. I'm running all macros from sheet one and I need it to stay active all of the time. I'm using the following code to sort sheet2. When I sort the column on sheet2 with the code, I can not get back to sheet one without an error. Worksheets("Sheet2").Activate Columns("a:a").Select Selection.sort Key1:= Range("a1"), Order1:=xlDescending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal I've tried Worksheets("Sheet1").Activate Columns("a:a").Select..............
View Replies!
View Related
Copy Range Values According To Cell Value
I 've a table of data It begins from A4 :f last row In "A"column dates and in the other coulmns from b:f different data in cell "g4" Iwil write the new sheet name In cell "h4" I write the starting date in "i4" I write the end date the starting date and the end date are equal to values in range (A:A) now i want a vba code to select the part of table which starting with the row where is the starting date-("h4" ).value- is found in range(a:a) ,and the end of the selected part of table can be difined according to the "I4" value. after selecting this part of date i want to copy it to sheet according to G4 value
View Replies!
View Related
Find Range With Value X And Copy To A Cell
I have small problem to solve and I can't find out how: I have to find cells in a range (L4:L20) with value PM and copy range with two next cells to cell F4 (not a cell with "PM") If in range("L4:L20") cells = PM then copy range with next 2 cells to ("F4"). See attached worksheet.
View Replies!
View Related
Create Copy Of Active Sheet & Convert Original To Values Only
I need to copy the Selected Sheet (Sheet name will be different each month) on a spreadsheet and paste the copy to the left of the selected Sheet. Then I need to copy and paste values the entire sheet of the sheet that the copy was made from (the one on the right). I am very new to macros, and I tried recording and manually editing the macro with no success. The number of sheets will be different always as I will be adding this to different workbooks and also because new sheets may be added to any workbook at any time. I attached my code that I came up with, as I am not familiar with code enought to "[code]" my code.
View Replies!
View Related
Named Range That Refers To Active Sheet
is there a way to have the same named range cover a range of cells regardless of which sheet you are on? They seem to want to default to the page you are on. I want to make some VBA subroutines that will go over each sheet, and perform the same functions on each sheet. All sheets have the same format, but different data. I guess worst case scenario I can just break down and use multiple workbooks, but this seems a little less desirable. Should I be dividing this into seperate posts?
View Replies!
View Related
Apply Auto Filter To Active Range
I find it to be a little irritating that I have to remove the autofilter, then reapply it whenever I start entering data into a new column. I want a macro that I can assign to a button so all I need to do is hightlight the range of cells I want to apply the autofilter to, and click the button.
View Replies!
View Related
Copy Range Starting From Last Used Cell In Column
I have a macro that is copying information from one spreadsheet into columns "A through E" on the next available row in a seperate spreadsheet. Beginning with column "G through L" I need to copy the formulas from the row above in the same spreadsheet. Is there a way to do that since the row being copied from will change each time?
View Replies!
View Related
Store Active Autofilter Criteria In Array Or Range
I want to perform some operations (basically a secondary filter) based on the values which are currently filtered within a single filter column. .Autofilter.Filters(n).Criteria1 and .Criteria2 are great, but what if there are more than 2??? i.e. I have a column containing values L01 to L20. My column is filtered on L05, L06 and L07 (or some other combination). I want to extract the values and L05, L06 and L07 and do what I will with them.
View Replies!
View Related
Copy Single Cell Paste Range VBA
The following does paste the formula into the dynamic range, however, it doesn't move on to the next step in the code. It seems to get stuck on the last line. I let it run for 5 minutes and it still did not move to the next set of commands ...
View Replies!
View Related
Copy Rows To Sheet Based On Cell Value In Range
a macro button on my excel sheet that should do the following. i have a range (Ex: E3:E46) which is being continuously filled, i need to transfer the information to another sheet depending on column "E", (Ex: if "E3" = "A" paste row to sheet2 if = "B" paste row to sheet3) and so on each row could have another string in column "E". after the paste is done it should clear the range making place for new entries, that should also be copied finding the next empty cell (it shouldn't delete the old entries)
View Replies!
View Related
Find First Empty Cell In Range And Copy Data
I am looking for a formula function or a vba code where: - In workbook1 find the first cell that is empty between range A7 - A10, - In workbook2, in Range G10- G13: find the word "Day1". - If the word "Day1" exists in cells G10 or G11 or G12 or G13, copy the particular cell or cells where "Day1" exists to the first found empty cell or cells in range A7-A10 in workbook1. Lets suppose cells A8, A9, A10(workbook1) are empty cells, that means A8 is the first empty cell. And G10,G11,G12, G13 (workbook2) have the word "Day1" Then, Copy cell G10 into cell A8 Copy cell G11 into cell A9 Copy cell G12 into cell A10
View Replies!
View Related
Copy Range & Paste To Last Filled Cell Plus X
I am using the copy range command to copy cells from one worksheet to one that is generated on commandbutton click. Is there any way to 'paste' the cells in row 3 instead of row A? The code i am using looks like this - Worksheets("Products").Range("A" & i + 2).Resize(1, 6).Copy Range("C" & Rows.Count).End(xlUp).Offset(1) This code works fine, but i want the data to start in row 5, not at the top.
View Replies!
View Related
Copy Of Active Workbook Path Stamped Onto Spreadsheet With Date And Time / Edit Check
1) I need to add an edit check 2) have a copy of Active Workbook Path stamped onto spreadsheet with date and time to create a visual record of where the file has been saved (described after the code below). 1) I need to verify that two cells (S7 and S9) are not blank before running my code below (=IF(OR(S7<>"",S9<>""),RUN CODE,"You must select your Provider or Division before you can save this document")). - If both of these cells are blank a message box should notify the user that they must select the provider and/or division before they can continue with the save. - If one or more of these cells are not blank the code below should run.
View Replies!
View Related
Copy Range To Row Below Last Used Cell In Column & Format
I'm trying to Copy and Insert formulated cells from sheet "Add Entry" range A3:AZ4 to Sheet "January" just above the last row containing data (the Totals line) starting in column B. The cells need to remain the same in cell size and maintain the formulas that are inmbedded within them. I want to be able to do this repeatedly by applying this macro to a button. I would also like (if possible) to alternate the color of these cells in an alternating row fashion.
View Replies!
View Related
Find Method To Search For The Active And Non Active Values
I have a range of amounts in Sheet 1 from F7:Q13 and im using the find method to search for the active and non active values in the cell. Which means that if there's a value in the cell it will transfer the value in Sheet 2, if nothing is found in the cell the cells in Sheet 2 will return as nothing or null. I think the problem lies on the FindWhat variable. Im getting a compiled error which im not sure what is it. I've attached the spreadsheet so you get a better idea of the problem that i encountered.
View Replies!
View Related
|
TRACKER
